Result recorded values not appearing in printing the Inspection lot

Hi all ,
Using QC21 i am printing the Inspection lot but the Result recorded values are not appearing in printing the Inspection lot .
while creating the certifacte profile i had maintained the MIC for which i had saved as Summary for recording . if i change this to Orginal value it says that this doesnt exist in the Inspection plan .
can somebody help me on this .
thanks ,
ksr

Hi
1.Make sure that you are using same MIC in Task list & certificate.
2.make sure that you have done RR & taken UD.
3.make sure that MIC is reference MIC.
4.Make sure that profile is attached to material
Regards
Sujit

Similar Messages

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

TECO is not allowed without closing the inspection lot

Hello
I have implemented 03 & o4 inspection.
When I made TECO of Process Order system is allowed without making UD of inspection lot.
I required if the inspection lots are open of particular process order system should not allow for TECO.
Please suggest the solution.
Regards
Ashish R

Hi ,
Can you check in the Follow up action in spro whether you have defined FM QFOA_ORDER_TECHNICAL_COMPLETE and mark the After posting and Sync updating.
Check with your abaper with the below code -
CALL FUNCTION 'QFOA_ORDER_TECHNICAL_COMPLETE' "Follow-Up Action: Technically Complete PP Order with order category 40 ( AUFK-autyp= 40 )
EXPORTING
    i_qals =                    " qals
    i_qave =                    " qave
*   i_qapo =                    " qapo
IMPORTING
    e_subrc =                   " sy-subrc
TABLES
    e_protocol =                " rqevp
    . " QFOA_ORDER_TECHNICAL_COMPLETE
Otherwise , you can apply User Exit PPCO0007 in co02 or cor2
Regards
JH

Results recording tab not appearing in QA32

hi,
can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?

Just check which roles are added to that used id
selec 1 role that is relevent to inspection (result recording) and add QE01 t_code in that role.
take help from ur basis guy for this.

Moved recording does not appear as content

I recently encountered an issue where, when I attempt to move a recording from under a meeting to a Shared Content folder, either the list of Shared Content folders does not appear or, when the move is "successful", the recording is bot listed in the new content location. Interestingly, if I change the URL of the destination location from "content" to "meeting" (http://server/admin/content/sco/... to http://server/admin/meeting/sco/...), the recordng will appear in the list. Unfortunately, under this "meeting view", there is not any editing or offline functionality. The link for the recording continues to be functional and playback works normally, but the recording is otherwise treated as a "meeting" rather than content.
Using the API, I used the sco-by-url XML action to compare the values of an affected recording to an unaffected one, but could not find anything that appeared unusual. Both recordings were identified as the "content" type.
Atempting to edit the video, or make an offline copy, by modifying the usual link produced by clicking those button with the appropriate url-path generates a "Not Found - The selected resource does not exist" error. The editing and offline copy processes worked normally prior to the move.
We are currently running Adobe Connect version 8.2.0.0:
package=8.2.0.1.156.20110921.963902
installer=8.2.0.0.11.20110728.938680
fmg=8.2.0.0.4.20110906.879854
fms=8.1.1.0.2.20110427.772086
presenter=8.2.0.0.6.20110824.924658
cps=8.2.0.1.3.20110920.973276
mssql=8.1.0.0.10.20110311.8644363
teleintercall=8.1.0.0.2.20110207.776631
telepremierena=8.1.0.0.21.20110412.882778
telepremiereemea=8.1.0.0.21.20110412.882778
cpshelp=8.2.0.0.4.20110908.964981
addins=8.2.0.0.3.20110831.929039
dbscripts=8.2.0.0.23.20110818.956139
teleavaya=8.1.0.0.4.20110412.882778
telecisco=8.1.0.0.17.20110412.882778
telemeetingone=8.1.0.0.2.20110207.776631
telephonyservice=8.1.0.0.8.20110228.847019
tomcat=6.0.29
stunnel=4.28
Is there another mechanism Adobe Connect discerns between the content and meetings so far as under with view/interface it will be displayed? Is there a way to correct this behavior for existing files? Thanks for any insight.
Eric

Having support look at this may be the best option. Since you are using your own server, you should call 866-335-2256, wait for the second round of prompts and then option 1. Have your support contract number ready when you call.

Vendor ref. no. not appearing in print preview of vendor aging report

Dear all,
Vendor reference number is not appearing in print preview of vendor ageing report,we have
customized template AGE3 collection report,we have taken print outs before a month,vendor
reference number get printed in report,now it is not appearing
What could be problem ?
Any one faces this issue ?
We are using SAP Business One 2005 B (7.40.252) SP: 00 PL: 41.
Latest patch upgrade to PL:46 will solve the issue ?
Jeyakanthan

hi all,
Thru a workaround i brought up vendor reference number in print preview/print,
Applied formatted search in journal remarks of ap invoice thru query
SELECT $[OPCH.NumAtCard]
,this will populate vendor ref. no in journal remarks
which can be displayed in details in aging report.
Is there any solution other than above to bring vendor reference number in print ?
Jeyakanthan

Results recording could not be carried out

Hi all ,
You cannot record any characteristic results for this inspection lot. The material master has been set up for the existing inspection type in such a way that results recording is not supported .
where can i find the setting in the material master so that i can make result recording .
thanks
ksr

Hi
Go to mm02>Qm view->sleect inspection type--->click on check char & Inpsect with task list
then result recording from next lot will be possible
Regards
Sujit

How to change annotation's appearance when printing the annotation under Adobe Reader?

I'm developping a plugin under SDK 7.0 for Adobe Reader . I have two problems.
1)I will change annotation's appearance when printing the annotation. How to do under Adobe Reader?
Uunder Adobe Arobat,I use PDRegisterAnnotHandler to register GetPrintAppearance,but PDRegisterAnnotHandler does not work under Adobe Reader.
2)Under Adobe Reader ,app.execMenuItem doesnt work.How to execute menuItem using JavaScript under Adobe Reader?
Please Help,had better give me sample,thank.

app.execMenuItem most certainly does work with Reader - what problems are you running into trying to use it?
As for developing Reader plug-ins - yes, some of the SDK methods aren't available to Reader. If you want to change the appearance of an annotation in Reader, you would need to acquire the Cos object of that annotation and modify its appearance dictionary manually.

Word styles not appearing in Print Document Appearance dialog

My custom list styles in Style Mapping.dot are not appearing in the Print Document Appearance dialog when I try to map CSS styles to Word styles.
The styles do appear in the template when I open it in Word. They appear in the styles task pane whether I select "In current document" or "In use" in the Style Pane Options dialog in Word. The styles have the same name (such as "Bullet" or "Number") in Word as the CSS styles in RoboHelp.
I tried saving Style Mapping.dot as .dotx, thinking that RoboHelp 8 might work better with the current template type, but no help. I tried adding the template to the same folder as the Normal.dotm template is in and opening it there. No improvement.
Oddly, the built-in Word styles List, List 2, & etc and List Continue and its series appear in the Robo dialog, but the styles List Bullet and others in that series do not appear.
I suppose I could modify the list styles that do appear in Robo and map them to my CSS list styles, but that feels a bit like a desperate kluge.
Does anyone know what might be wrong, either with my Word template or with Robo, that might be causing what seem to be perfectly good Word styles to not present themselves for mapping?
Thanks again,
John

Peter,
I think your discussion of this problem could explain the situation and propose a workaround more simply than it does.
Based on your article, I assumed that Robo displays only the built in Word list styles such as List and List Continue (since those were the only styles showing up in the style mapping dialog and since your example shows matching a Robo style named List Mapping to a Word built in style named List). I assumed I would have to match my Bullet style to a style named List in Word, and match the indented bullet style to List 2, and so on. The actual situation is that Robo, for some godforsaken reason that only idiots would understand, will not show a Word style if any numbering (bullets or numbers) is applied to it. That is, one does not have to avoid a class of styles called “List styles”, one only has to avoid applying numbering to the styles until later.
Thus the workaround is to create the word styles (with names that match the Robo styles!) that contain every attribute you need EXCEPT the numbering. That is, I can link Bullet to Bullet and Number to Number and Indented Number to Indented Number, and so on and on, as long as I have all the Word styles in the template with their numbering set to None.
Then after I generate the document, I can modify the styles to add the appropriate numbering, and voila!
Currently scrolling the doc & modifying styles. Might be a glimpse of daylight.
John
From: Peter Grainge [email protected]
Sent: Thursday, October 13, 2011 8:47 AM
To: John Dawson
Subject: Word styles not appearing in Print Document Appearance dialog
Re: Word styles not appearing in Print Document Appearance dialog
created by Peter Grainge<http://forums.adobe.com/people/Peter+Grainge> in RoboHelp - View the full discussion<http://forums.adobe.com/message/3969382#3969382

Epson r800 prints, but does not appear in Printer List: can't use Utilities

My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
iMac Mac OS X (10.4.9)

For your Epson try this:
Hard Drive, Library, Printers (folder), Epson folder,
Inkjetprinter folder, Utilities folder and here you
will find Epson Printer Utility2. Click on it and it
should work.
Note. Epson utilities will not work unless the
Printer is directly connected to the computer.
Had the same issue with my 2200 photo and the above
worked.
Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility.

InDesign Book Project...some images/graphics not appearing in print-ready PDF

Some images/graphics not appearing in print-ready PDF. Why? and how to fix.
The images are linked.

That didn't work, but i copied images from other parts of my document that did work and pasted/resized to replace images that didn't import and that seemed to work.
still wish i could figure out why it happens in the first place so i don't have to do this other process.

SCCM 2012 R2 - Software metering Reports Parameters Value not appear to choice

Hello Every Body
I hope to get answer as soon as possible
I have SCCM 2012 R2 & SQL Server 2012 SP1, my problem is ( all software metering Reports Parameters Values Not appear so I cannot select
Note:-
( All parameters Available Value set to Get Values From a Query)

Has it been over 45 days since you created the active SWM rules? Do all (most) other SWM reports
work?
all other reporting in SWM which doesn't ask for month and year working
only the problem in year & Month Parameters Values
note:-
these reports doesn't need a 45 days to work, alwasy when i install SCCM reports working only from the second day of installation

L.C value not appearing in MB51 report

Dear gurus,
The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

Dear Jay,
It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated in the below path
SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
Goods receipt made after this change will be triggered the finance document.
R,
amala

TS3147 I seem to have lost fax capability with Snow Leopard. Does not appear in Print as before. Cant find fax in system Preferences. No drivers for fax found Bob Wines.

I seem to have lost fax capability with Snow Leopard.
Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
Initially said it was downloading software but no longer does this. Fax test works on HP site.
Using HPC410aHP Photosmart Premium
Any help would be appreciated.
Bob Wines.

Thanks for your detailled description of the faxmodem installation!
I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
Does anybody know, if send faxes are saved somewhere?

It will not let me print the score!

my kid did a project on GarageBand. but GB will not print a score (all instrument on one page). so i imported his GB file into Logic, just to print a score of it, and now LOGIC will not let me print the score (the "print" option on the menu is 'grayed-out'). help! he needs this by 3:00 today. thanks.

The Quiz Results slide will always pause and there's no way to prevent that. Look at its timeline and you can see a faint vertical line that indicates the pause point. You can use your mouse to move this sideways and delay the pause untill objects enter the timeline. But the rest of the slide beyond that pause point will only play once you click the Continue button. If you have set a very long duration for the Quiz Results slide, then once you click Continue, what you see as the Continue button not working could just be the timeline continuing to play until it reaches the end of the slide. Watch the scrub bar on the playback bar to see if it's moving.
Once the slide is paused the user has to click one of the buttons on that slide to move elsewhere. If your Continue button is not working, the usual reason is that you have the Quiz > Settings > Required option set to something that will prevent the learner from moving beyond the Quiz Results slide until they fulfil some kind of requirement (e.g. answer all questions or pass the quiz). So check that setting.

Result recorded values not appearing in printing the Inspection lot

Similar Messages

Maybe you are looking for