Retesting and Expiry batch for FG material
Hi
I have ROH, VERP, HALB and FERT material type materials in our plants. I want ROH, VERP and HALB materials should go for recurring inspection on next inspection date and expiry on expiry date on QA07 execution in background job.
But, in my FERT material there is no rcurring inspection. Is it possible to run QA07 for FERT material only to transfer material to blocked stock in case of expiry, but should not generate any inspection lot for retesting.
What settings can help me to solve the issue.
Thanks in advance for your response.
This shouldn't be any issue.
Turn on the 09 inspection types for all your materials.
Do not maintain an inspection interval for your FERT materials. (or any other material that you dom't want inspection lots for).
Then just run the QA07 program for all your materials.
The program exectues in two passes,. The first pass moves all expired material first to blocked stock or restricted stock. This should remove your expired batch to blocked stock or restricted status depending if you use batch status.
The second pass creates 09 inspection lots for those that have inspection date values and meet the criteria of the batch job values. Since your FERTS won't have a next inspection date in the batch record, no lots will be created.
FF
Similar Messages
-
Auto To working for one material and not working for other material
Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHANThnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie -
Need to add Loading Grp and Transportation Grp for a material
Hi Friends,
I want to add the loading grp and transportation grp for a material using transaction MM02 but I am unable to do so. Also would like to add a few more views like plant storage and accounting view for the same material using MM01 but I am unable to see these views in the selection box.
Can anyone please tell me how can I do so.
Regards,
Wasim.HI
Goto OMS2 and then double click on the material type and now select the required views in User Departments Tab.
To add loading group and transportation group you have to enter the Sales organization and distribution channel in MM02
regards
Prashanth -
How to create a batch for a material, with batch characteristic input?
I am currently using BAPI_BATCH_CREATE to create batch for materials in my program. However, I find no way to input the batch characteristics. Is there any existing function module responsible for that? Thanks!
Hi,
You can use FMs 'CLVF_INSERT_AUSP' or 'CLVF_INSERT_AUSP' to insert or update characteristics for materials.
In the structure INS_AUSP or UPD_AUSP -
OBJEK corresponds to the material number,
ATINN is the characteristic name,
KLART is the class type which is '001' for materials, and
ATWRT is the characteristic value.
Populate values into the above fields for the batch of materials and call this FM.
Reward points if found useful...!
Cheers
Abhishek -
Skip lot across multiple batches for same material
Hi,
I am looking for a way to control skip lots across multiple batches for the same material.
We need to do a quality check in production after a certain quantity produced (on a machine, for a material). My idea was to do skip lots (for GR) until we reach a threshold (say 10.000 pcs) and then do an inspection for the next GR for that material.
Any ideas how to set that up?
Thanks for any hint
AndreasHi mergler,
Ref to your query pls check this link Stock Posting for Skip Lots
Thanks in advance -
How to know Sales Organization and distribution channel for a material
How to know Sales Organization and distribution channel for a created material
Hi,
For a single material means u can go mm03 7 select the material number 7 select the sales views then press f4 the details u can see.
For any number of materials u can go to se11 & give table name MVKE then select the required parameters & execute.
pandari -
Dispay of aavailable batches for a material
Dear Friends,
I want to see the available batches for a specific material-plant/storage location combination.
Can anybody guide me how to find out the available batches for this combination.
Thanks & Regards
SatyaHi,
Try MD04 > it won't display batch but you can get information on availability. If you want to see stock level please check MB52, MMBE, MB5B.
Csaba
Edited by: Csaba Szommer on Jul 24, 2008 1:02 PM -
How to findout Class type and Class name for a Material
Hi all,
How can we findout the Class name and Classtype assigned to a material. ( Varaint Classification for a material)
MM03-> enterial Materil->Classification Tab
Regards,
Rajeshcheck the tables AUSP
check the below link
Material Chassifications
regards
srikanth
Message was edited by: Srikanth Kidambi -
Qm check with HU and without HU for same material.
Hi,
I have a doubt, I am implementing in a chemical industry and I have the material that is 1st getting GR from production to Tank (Insp type 04) and then at a later stage i am creating a packing order with GR of the HU (insp type 04). problem is that i have QM active for GRN from production for both points but 1 is HU managed and the other is not. System does not allow without HU tick in Inspection type setup in MM. How do i go about doing GR for both HU managed and non HU managed in the same material?
Thanks,
Ariel.Hi,
Thanks for the reply, I have 2 queries with this, i had already defined a new insp type (say Z040) as a copy of 04 and checked the tick for HU, i have also defined 2 inspection plans for the same material and set the manual determination but the system is not generating the lot for the HU managed material. How do i get the system to generate the lot. how do i trigger the user exit?
Please reply...
Thanks,
Ariel Desa. -
Reg; Table for link between plan and sales organization for a material
Hi,
I created a material for two plants and maintained one sales org, now i wnt to know the table to find the link betwen plants and sales organization wtih respective materials.
Pls Help me......
Thanks,
Anto.hi,
check tables MVKE, MARC and MARC...
You can view them in SE16/SE11 tcode...
Regards
Priyanka.P -
Report for expiry date of the material
All SAP Gurus,
We have certain Materials which are expirable.
These Materials are batch managed, and each batch is having different expiry date.
Is there any standard report available which can give is the days remaining to reach the expiry date (for that material)?
Regards,Hi,
Try MB5M,
here
Field name Field value
Material Enter the material code to which the report is desired.
Plant Enter the plant in which the report is to be generated.
Storage Location Enter the storage location in which the report is to be generated. Optional entry. Leave it blank.
Batch Batch number to be displayed. Optional entry. Leave it blank.
Remaining shelf life Minimum amount of time for which the material must keep upon goods receipt for the goods receipt to be accepted by the system. Optional entry.
Remaining shelf life warehouse Indicates that the remaining shelf life of a batch in
Total remaining shelf life Indicates that the system displays the total remaining shelf life of a batch.
The total remaining shelf life is calculated from the shelf life
Expiration date minus the current date. Select this radio button.
Indicates that the system also displays materials with zero stock. Optional, leave it blank.
Display of remaining shelf life in days. Select this radio button to display the remaining shelf in days in the report.
Regards,
Pardeep Malik -
Batch for material in plant already exists
Hi ,
When create a goods reciept for material ABBBBB in plant X001 and sloc 0001 for the first time in a day , system automatically creates a batch number .
When I try to create a goods reciept for the same material in same plant/sloc combination , system gives me an message "Batch for the material already exists in plant " . and it stops me from going to enter values for characteristics .
But system creates a batch automatically when I recieve the same material into same plant with different sloc .
Can anyone suggest me the config or userexit so that system allows me to create a batch with a warning message .
Thanks ,HI
When u r creating batch from MSC1N, u r maintaing for combination of material, batch, plant, storage location. So with this combination u find already existing batch when u enter same material again for plant and sto location combination.
Now when u change the storage location it is creating new batch as it is not there for different combination.
Also you can check configuration in Img -- Log general -- batch management --Creation of new batches -- Creation for Goods movement.
Here u can selct option for particular movement type.
Hope this will solve ur problem in this regard
Reward if u find it helpful
Regards
Amol -
Last purchase order and goods receipt for material
Hello to everyone,
is there any standard report where I can see the last purchase order and goods receipt for a material?
RegardsHi,
Latest PO you can get from ME2M, by giving input as material and scope of list as best.
Latest GR date can be get from MB51, by giving input as Material and movement type as 101.
Regards,
Prabu -
Create Vendor Inforecords and source list for material
Hi All,
senario:I have to create vendor Inforecords and source list for new material as copy of reference material.
There are various FM's available to read inforecord, source list but as reuirement is to copy these things from reference materil and create same for new material.
Can you people suggest any way to achive these functionalies through any FM, BADI or any other way...
Looking forword for your reply..
Regards,
RahulHi All,
Can we use FM MGW_COPY_INFORECORDS to create inforecords for new material.
Just to cross check, as i m not sure about use of this FM.
Regards,
Rahul -
Relation between PO Qty and Minimum Lot size of material master
I have maintained "100" in minimum lot size ( MRP1 View, table MARC and field BSTM) for the material.
I am also succssed to create the Purchase order for 2.5 Qty for the same material. '
I wanted to know, how system is allowig to create the PO with lesser qty or is this view is maintained only for sales?
Please give your expert comments on the same.
Thanks,
Vikas
99301 03991Used for claculate the procurement qty during MRP and depends on the lot size procedure you select. quota arrangement also uses this lot size.
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/f4/7d26ad44af11d182b40000e829fbfe/content.htm]
Edited by: Karthik on Jul 8, 2011 9:47 PM
Maybe you are looking for
-
Gophone on iphone 6. Does it work and if yes, where can i buy it.
gophone on iphone 6. Does it work and if yes, where can i buy it.
-
Can't use "send to" mail recipient as attachment
Since installing ML I the send to function won't work. Mail opens but nothing else happens. What settings have changed?
-
Get Info - "you can" - greyed or non greyed - what is the diff ?
in looking at any OSX Tiger Get Info window - why are some of them greyed out where it says " you can" its probably a permissions thing - but the rub isn't coming to me yet....
-
HT204266 AppleID keeps saying disabled anytime I try to update apps.
I have reset my account & password numerous times, yet everytime I try to update the apps installed on my device it says Apple ID has been disabled.
-
Capturing the error messages generated by ALV Grid
Hi, I have a ALV Grid, and a field date of DATS type. If i enter wrong date a message pops up with invalid date entry. How can i capture this error message in ALV Grid.