Retrieve all attributes for a specific objectClass using ldapsearch

Hi everybody,
Question : is it possible to retrieve all attributes for a specific objectClass (by example person) using ldapsearch tool ?
I tried something like that, but it doesn't work :
ldapsearch -v -h XXX -p XXX -b "cn=schema" -s base "objectclass=person" attributetypes
Thanks a lot,

Ok, Thanks for you help,
But my question is : For a specific objectClass, by example, I would like to have all attributes for the objectClass called "inetOrgPerson"
something like that :
ldapsearch -D "cn=Directory Manager" -w pwd -h host ...objectClass="inetOrgPerson"
and the response could be :
audio || businessCategory || departmentNumber || displayName || givenName || initials || jpegPhoto || labeledUri || manager || mobile || pager || photo || preferredLanguage || mail || o || roomNumber || secretary || userPKCS12
I dont't know how to do ????

Similar Messages

  • Looking for a reference manual that actually describes in detail all attributes for a command

    I am using CS5. I am teaching myself Photoshop using their book, "Classroom in a book".
    Thought the lessons, they will suggest specific setting for command attributes without describing exacting what these values mean.. For example, on page 88 they give the student specific settings for the Refine Edge dialog bog under the Quick Selection tool. They say, "To prepare the edge for a drop shadow, set Smooth to 24, Feather to 0.5, Contrast to 12, and Shift Edge to -21". Note: I am calling things like Smooth, Feather, Contrast, etc command attributes.
    My question is not about this specific example, but all these attribute values for all the commands. For example, what does Shift Edge really do when negative or positive. My question is: does a reference, either a book, pdf, or a non-Adobe product (probably a book) exist that actually explains when each attribute actually does for every command? Basically looking for a boring detailed reference guide so when I am using a specific command, I can read about the attributes for the specific command and understand what the values really mean and not guess my trial and error.
    Thanks in Advance,

    Lou Fuchs wrote:
    For example, I just happen to have my book open to page 113 and it is showing me (at the bottom of the page) the dialog box for Layer Style.  I was hoping for a reference manual that explains every option in the that dialog box in detail and tells you what each option means and how it effects the image.
    I hope this clarifies what I am looking for.
    Here's a little snippet from the info about Layer Styles in the Adobe manual.
    Layer style options
    To the top
    Altitude For the Bevel and Emboss effect, sets the height of the light source. A setting of 0 is equivalent to ground level, 90 is directly above the layer. Angle Determines the lighting angle at which the effect is applied to the layer. You can drag in the document window to adjust the angle of a Drop Shadow, Inner Shadow, or Satin effect.
    Anti-alias Blends the edge pixels of a contour or gloss contour. This option is most useful on small shadows with complicated contours. Blend Mode Determines how the layer style blends with the underlying layers, which may or may not include the active layer. For example, an inner shadow blends with the active layer because the effect is drawn on top of that layer, but a drop shadow blends only with the layers beneath the active layer. In most cases, the default mode for each effect produces the best results. See Blending modes. Choke Shrinks the boundaries of the matte of an Inner Shadow or Inner Glow prior to blurring. Color Specifies the color of a shadow, glow, or highlight. You can click the color box and choose a color. Contour With solid-color glows, Contour allows you to create rings of transparency. With gradient-filled glows, Contour allows you to create variations in the repetition of the gradient color and opacity. In beveling and embossing, Contour allows you to sculpt the ridges, valleys, and bumps that are shaded in the embossing process. With shadows, Contour allows you to specify the fade. For more information, see Modify layer effects with contours. Distance Specifies the offset distance for a shadow or satin effect. You can drag in the document window to adjust the offset distance. Depth Specifies the depth of a bevel. It also specifies the depth of a pattern. Use Global Light This setting allows you to set one “master” lighting angle that is then available in all the layer effects that use shading: Drop Shadow, Inner Shadow, and Bevel and Emboss. In any of these effects, if Use Global Light is selected and you set a lighting angle, that angle becomes the global lighting angle. Any other effect that has Use Global Light selected automatically inherits the same angle setting. If Use Global Light is deselected, the lighting angle you set is “local” and applies only to that effect. You can also set the global lighting angle by choosing Layer Style > Global Light. Gloss Contour Creates a glossy, metallic appearance. Gloss Contour is applied after shading a bevel or emboss. Gradient Specifies the gradient of a layer effect. Click the gradient to display the Gradient Editor, or click the inverted arrow and choose a gradient from the pop-up panel. You can edit a gradient or create a new gradient using the Gradient Editor. You can edit the color or opacity in the Gradient Overlay panel the same way you edit them in the Gradient Editor. For some effects, you can specify additional gradient options. Reverse flips the orientation of the gradient, Align With Layer uses the bounding box of the layer to calculate the gradient fill, and Scale scales the application of the gradient. You can also move the center of the gradient by clicking and dragging in the image window. Style specifies the shape of the gradient. Highlight or Shadow Mode Specifies the blending mode of a bevel or emboss highlight or shadow. Jitter Varies the application of a gradient’s color and opacity. Layer Knocks Out Drop Shadow Controls the drop shadow’s visibility in a semitransparent layer. Noise Specifies the number of random elements in the opacity of a glow or shadow. Enter a value or drag the slider. Opacity Sets the opacity of the layer effect. Enter a value or drag the slider. Pattern Specifies the pattern of a layer effect. Click the pop-up panel and choose a pattern. Click the New Preset button          to create a new preset pattern based on the current settings. Click Snap To Origin to make the origin of the pattern the same as the origin of the document (when Link With Layer is selected), or to place the origin at the upper-left corner of the layer (if Link With Layer is deselected). Select Link With Layer if you want the pattern to move along with the layer as the layer moves. Drag the Scale slider or enter a value to specify the size of the pattern. Drag a pattern to position it in the layer; reset the position by using the Snap To Origin button. The Pattern option is not available if no patterns are loaded. Position Specifies the position of a stroke effect as Outside, Inside, or Center. Range Controls which portion or range of the glow is targeted for the contour. Size Specifies the radius and size of blur or the size of the shadow. Soften Blurs the results of shading to reduce unwanted artifacts. Source Specifies the source for an inner glow. Choose Center to apply a glow that emanates from the center of the layer’s content, or Edge toapply a glow that emanates from the inside edges of the layer’s content. Spread Expands the boundaries of the matte prior to blurring.
    Style Specifies the style of a bevel: Inner Bevel creates a bevel on the inside edges of the layer contents; Outer Bevel creates a bevel on the outside edges of the layer contents; Emboss simulates the effect of embossing the layer contents against the underlying layers; Pillow Emboss simulates the effect of stamping the edges of the layer contents into the underlying layers; and Stroke Emboss confines embossing to the boundaries of a stroke effect applied to the layer. (The Stroke Emboss effect is not visible if no stroke is applied to the layer.)
    Technique Smooth, Chisel Hard, and Chisel Soft are available for bevel and emboss effects; Softer and Precise apply to Inner Glow and Outer Glow effects.
    Smooth Blurs the edges of a matte slightly and is useful for all types of mattes, whether their edges are soft or hard. It does not preserve detailed features at larger sizes. Chisel Hard Uses a distance measurement technique and is primarily useful on hard-edged mattes from anti-aliased shapes such as type. It preserves detailed features better than the Smooth technique.
    Chisel Soft Uses a modified distance measurement technique and, although not as accurate as Chisel Hard, is more useful on a larger range of mattes. It preserves features better than the Smooth technique. Softer Applies a blur and is useful on all types of mattes, whether their edges are soft or hard. At larger sizes, Softer does not preserve detailed features.
    Precise Uses a distance measurement technique to create a glow and is primarily useful on hard-edged mattes from anti-aliased shapes
    such as type. It preserves features better than the Softer technique. Texture Applies a texture. Use Scale to scale the size of the texture. Select Link With Layer if you want the texture to move along with the layer as the layer moves. Invert inverts the texture. Depth varies the degree and direction (up/down) to which the texturing is applied. Snap To Origin makes the origin of the pattern the same as the origin of the document (if Link With Layer is deselected) or places the origin in the upper-left corner of the layer (if Link With Layer is selected). Drag the texture to position it in the layer.

  • How do I turn off all alerts for a specific email account

    I want to disable all notifications for a specific email account and I can't find the options to do this. So basically I have 3 email accounts linked on my blackberry. I and I want to make it so that any time account #3 gets an email I don't get a red flashing light or a new message * anywhere. I case you're wondering I've funneled all those annoying promo adds to this one account. It's just that sometimes some of them actually have good deals so I want to be able to check them every now and then but it's seriously annoying when my red light is going off constantly. NEVER MIND! I found it, but I'm going to leave this here incase anyone else it looking for something like this. You go into notification profiles and change the settings for that profile. So it's :   Notifications -> Profiles -> Normal (or which ever one you want) -> Customize App Notifications -> Email Messages -> Select email account you want -> Turn off all notifications or modify them to your preference. It does suck that you can't just globally set it by email account. It seems you have to go through each profile and change the settings one at a time. Most people probably only have 3 though so it's not that big a deal #firstworldproblems. DOUBLE NEVER MIND! So the "solution" I mentioned above only seems to work for the LED indicator and the instant popup you that comes on the top of the screen when you get a new notification. I'm still getting the red "new email" star on the side bar when I do a quick look from the homescreen or an app. And the 3rd email account has a "new email" red star next to it as well. Hoping someone out there knows how to turn them off for a specific email account. Thanks. - Kbye

    Hi, I am using German OS therefore maybe the items are called differently in English: 1) Go into the main menu 2) Select "Alerts" 3) select the Profile you like to adjust 4) Select App Alerts 5) Select Email 6) You sould see your 3 mail accounts listed 7) Select the one you like to "mute" and you can set everything (sound, LED, vibration etc. individually for this acount) Hope it helps Alex

  • GetProperties( ) (all attributes) for BLOBs

    I am using Oracle 11g R2 SOE.
    I am trying to practice this example that is similar to the one in the doc about :
    getProperties( ) (all attributes) for BLOBsBut nothing gets updated in my table, even though it tells on the output 1 row is updated (as you can see below)
    if I change the statement into Insert, it works perfectly.
    What could be the reason ????
      img_data              BLOB;
      img_attrib        CLOB;
      mimeType          VARCHAR2(4000);
      width             NUMBER;
      height            NUMBER;
      fileFormat        VARCHAR2(32);
      contentFormat     VARCHAR2(4000);
      compressionFormat VARCHAR2(4000);
      contentLength     NUMBER;
       SELECT content, attrib, mimtype, width, height, fileformat, contentformat,
         compressionformat, contentlength INTO img_data, img_attrib, mimeType, width,
         height, fileFormat, contentFormat, compressionFormat, contentLength
         FROM com_photos WHERE id = 1012 FOR UPDATE;
      ORDSYS.ORDImage.getProperties(img_data, img_attrib,
             mimeType, width, height, fileFormat,
             contentFormat, compressionFormat, contentLength);
       DBMS_OUTPUT.put_line('Size of XML Annotations ' ||
       DBMS_OUTPUT.put_line('mimeType: ' || mimeType );
       DBMS_OUTPUT.put_line('width: ' || width );
       DBMS_OUTPUT.put_line('height: ' || height );
       DBMS_OUTPUT.put_line('fileFormat: ' || fileFormat );
       DBMS_OUTPUT.put_line('contentFormat: ' || contentFormat );
       DBMS_OUTPUT.put_line('compressionFormat: ' || compressionFormat );
       DBMS_OUTPUT.put_line('contentLength: ' || contentLength );
       UPDATE com_photos SET
        WHERE id = 1012;
    END;and I get this result
    Size of XML Annotations
    mimeType: image/jpeg
    width: 800
    height: 500
    fileFormat: JFIF
    contentFormat: 24BITRGB
    compressionFormat: JPEG
    contentLength: 55966
    1 row(s) updated.Another point, I am interested in getting only the width and the height of the image, but as I got i have to feed ORDSYS.ORDImage.getProperties with all parameters. Is there a way to get around ?
    Best regards,

    I think you don't need the SELECT for ... UPDATE statement since you are not updating the BLOB. In the UPDATE statement there is no need to update the BLOB since you have not changed the BLOB at all, you are just reading the properties embedded in the image using getProperties.
    However, I can't see anything obviously wrong.
    You could drop the SELECT for ...UPDATE statement, which you is a good thing anyway.

  • Retrieve all attributes with specified name attribute

    hi all,
    how to extract the ancestor attributes with given name which is also an attribute?
    for eg.
    <sponsor id="1" level="1" name="john">
    <sponsor id="2" level="2" name="mary">
    <sponsor id="3" level="3" name="ken">
    <sponsor id="4" level="4" name="mick"/>
    <sponsor id="2" level="2" name="kary"/>
    (the structure above will be deemed as unlimited nested nodes)
    +how to get ancestor given name=mick, will return one way ancestor sponsor named: ken,mary and john?
    +the attribute name is the key to travese up or down, how to get the value?
    please advise, and thanks

    i solved one part of my problem.
    But, now i have to get all attributes for each users and i couldn't find them. The getattributes method doesn't return anything (i 'd like to retrieve the first name, last name, adress ...)
    thanx for help

  • List of all participants to a specific role using PAPI

    Is there a way, we can get the list of all participants with a specific role using PAPI.

    Yes, it's possible to get a list of participants in a Role using PAPI. If you're doing this within a project (i.e. not from an external PAPI client), you can use the out-of-box catalog component Fuego.Lib.Role. Using Java syntax, it will look something like this:
        Role theRole = Role.find(name: roleName);
        Participant[] participantList = theRole.participants;If you're doing this from an external client, you'll find similar functionality in the class DirOrganizationalRole. In Studio, you can find this and related classes in the package Fuego.Fdi.*.

  • Retrieving list items from a specific view using CSOM

    How can I query a specific view of a SharePoint List using the C# CSOM? I am dealing with SharePoint Online, so the only option is to use SharePoint.Client.
    I have done this using Javascript, and I know how to do this with SharePoint On-Premises, but I haven't found a way to do with for SharePoint online using C#.

    hi Dkhouri,
    thanks for posting your issue, you can create a specific view of a list using CSOM and C#.
    Kindly find the code snippet below fort he same.
    Code for CSOM :- 
    // Starting with ClientContext, the constructor requires a URL to the
    // server running SharePoint.
    ClientContext context = new ClientContext("http:SiteUrl");
    // Assume the web has a list named "Announcements".
    List announcementsList = context.Web.Lists.GetByTitle("Announcements");
    // This creates a CamlQuery that has a RowLimit of 100, and also specifies Scope="RecursiveAll"
    // so that it grabs all list items, regardless of the folder they are in.
    CamlQuery query = CamlQuery.CreateAllItemsQuery(100);
    ListItemCollection items = announcementsList.GetItems(query);
    // Retrieve all items in the ListItemCollection from List.GetItems(Query).
    foreach (ListItem listItem in items)
    // We have all the list item data. For example, Title.
    label1.Text = label1.Text + ", " + listItem["Title"];
    For C# 
    public CamlQuery CreateInventoryQuery(string searchSku)
    var qry = new CamlQuery();
    qry.ViewXml =
    <FieldRef Name='SKU' />
    <Value Type='Text'>" + searchSku + @"</Value>
    return qry;
    Also, checkout below mentioned URLs for more details
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog :

  • Retrieve all pages in a site collection using powershell command

    Hi all,
    I need to retrieve all pages in a site collection and i wanted to display it in a csv file using powershell command.Please help.

    Hi Praveen,
    Here are two blogs would be helpful:
    PowerShell script to Enumerate Sites, Sub-sites and print them in a .csv file
    Powershell to Loop through all SharePoint sites and pages
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to retrieve all the data from a BLOB using view-generated accessor

    I am using JDeveveloper 10g v. 10.1.3 and am storing an image in a database as a blob object and need to retrieve all of the data to get the entire image and store it in an ImageIcon. The code I have works partially in that it retrieves the correct data, but only gets a piece of it, leaving me with a partial image.
    AppModuleImpl am;
    ImageVwViewImpl vo;
    am = (AppModuleImpl)panelBinding.getDataControl().getDataProvider();
    vo = (ImageVwViewImpl)am.findViewObject("ImageVwView");
    ImageVwViewRowImpl ivo = (ImageVwViewRowImpl)vo.getCurrentRow();
    ImageIcon icon = new ImageIcon(ivo.getImage().getBytes(1, (int)ivo.getImage().getBufferSize()));
    jULabel1.setIcon(icon);I either need to know how to use a stream to get the data out (from BlobDomain method getBinaryStream()), or how to get the other chunks of data separately.
    edit: I know the problem is that getBufferSize() returns an int which is too small to hold all the data, but need to know what to use instead. Thanks!

    This is the code I'm using now. Same problem :(
    AppModuleImpl am;
            ImageVwViewImpl vo;
            am = (AppModuleImpl)panelBinding.getDataControl().getDataProvider();
            vo = (ImageVwViewImpl)am.findViewObject("ImageVwView");
            ImageVwViewRowImpl ivo = (ImageVwViewRowImpl)vo.getCurrentRow();  
            ImageIcon icon = new ImageIcon(ivo.getImage().toByteArray());

  • Need to retrieve additional attributes for roles and users

    We need to access some attributes for our application. This information is not accessible through the core API. The attributes we need are as follows
    User Account
         Password locked
                    Date account locked last
              Account locked last by
              Date account last unlocked
              Account last unlocked by
              Reason for last account unlock
              Created By
              Person Responsible
              Changed By
    I know we can access this attributes using the IPCDAttribute. What i want to know are the namespaces and the corresponding attribute names. Could anybody point me in right direction? I have seen that IUserAccount API has a method called isPasswordLocked() which should return me the locked information, but i cannot access that method in the java code.
    Any help is very much appreciated.
    Edited by: Kalpesh Shirodker on Aug 5, 2008 3:10 PM
    Edited by: Kalpesh Shirodker on Aug 5, 2008 3:11 PM

    Hi Apurva,
    This Srini, i need your help for Leave Encashment workflow Approval Process in 3levels of approval.
    r u worked on same proceed for that. i can see the your posted on 5 months back in sdn.
    i can implement the bidi. how to determine agent 3 levels and how to link to workflow template and which workflow step types are using one by one tell me.
    Please i need your help leave encashment approval process. plz give me u r GMAIL ID.

  • Steps to apply Proxy settings for all Server in a specific OU using Group Policy ?

    I have several terminal server (2008 R2) running as RDSH in an OU called Terminal Servers.
    So how can I create the GPO setting to make sure that everyone who login to this terminal server will be getting the proxy settings automatically to on port 3128 ?
    I've created the GP object and then link it directly to the Terminal Servers OU using the following options:
    User Configuration (Enabled) > Policies > Windows Settings > Internet Explorer Maintenance >
    Connection/Proxy Settings > Enable proxy settings 
    But somehow when I login as myself and DOMAIN\Administrator the proxy settings in the IE11 is still unchecked with the old Proxy value and sometimes blank in some servers.
    /* Server Support Specialist */

    > I've created the GP object and then link it directly to the Terminal
    > Servers OU using the following options:
    > User Configuration (Enabled) > Policies > Windows Settings > Internet
    > Explorer Maintenance >
    > Connection/Proxy Settings > Enable proxy settings
    User policies apply to user objects - the servers will ignore them, and
    as long as there is no user in your terminal servers OU, no one will get
    this setting.
    Link your policy to the OUs where the users are, then use item level
    targeting to filter for a security group you create for this purpose,
    and add all your terminal servers to this group. Don't forget to reboot
    the servers after changing group memberships...
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:
    Since the browser in the Terminal Servers are all running IE 11, do I need to do the GPO using IEAK or GPP with the new ADMX template ?
    /* Server Support Specialist */

  • Retrieve All records and display in Report using CAML query in Report Builder if Parameter value is blank

    Hello Experts,
    i have created a report where i have one parameter field where user will pass parameter(e.g. EmpId). As per parameter record will fetched to report if no parameter is passed then it will display all records. I have done it by taking SqlServer Database as datasource.
    by using Following method
    Now i would like to do it by taking Sharepoint List as Datasource. For that what would be the CAML Query.
    Here is my existing CAML query.
    <RSSharePointList xmlns:xsi="" xmlns:xsd="">
        <FieldRef Name="Title" />
        <FieldRef Name="FirstName" />
        <FieldRef Name="LastName" />
        <FieldRef Name="FullName" />
        <FieldRef Name="UserName" />
        <FieldRef Name="Company" />
        <FieldRef Name="Title" />
      <Value Type="Text">    
       <Parameter Name="EmployeeId"/>    
    The above code is working if i am passing an employeeId to Parameter. If nothing is passed, it is Not retrieving any record.
    Please suggest
    Thank you

    Your problem follows the well-established pattern of using an "All" parameter filter in SSRS. There are a few approaches depending on the size of your data. The easiest one is to return all data from CAML and then filter it within SSRS, the following thread
    provides some examples,
    Other options include passing all of the possible values within the CAML query when "All" is selected, using multiple Report Files to distinguish between both CAML queries, or to use multiple datasets with some logic to show/hide the correct one.
    Dimitri Ayrapetov (MCSE: SharePoint)

  • How to retrieve all users in a specific group

    I am using SunOne directory server. Can someone please post a sample code that illustrates how to fetch all the list of users in a particular group.
    1) Let's say I want to find all the users in a group called "marketing". The root context is dc=mycompany,dc=com This group can be anywhere below this root context. Only information I am told is the name of the group - "marketing". How will I get all the users in this group?
    2) For each user that is retrieved from the group marketing, how will I find out the user's DN?
    Thanks for the help,
    - Satish

    Do it like this...
    String searchBase = "ou=marketing";
    StringBuffer filter = new StringBuffer();
    if (organizationName != null && !organizationName.trim().equals("")) {
    SearchControls constraints = new SearchControls();
    constraints.setCountLimit(200); // How many users should be found
    constraints.setTimeLimit(100000); // how much time should this search wait
    // Get a initial context and set it to the ctx object, filter.toString(), constraints);

  • How can I delete all loads for a specific infopackage in a process chain?

    Good day all,
    I've got a BW 3.5 system. and I have a cube which is loaded by two infopackages, I will call them "Current" and "History" which load each month.  On an ongoing basis I only want one "Current" infopackage load and many "History" infopackage loads.  At the beginning of a month before I load a new "Current", I would like to delete any loads in my cube that were loaded by "Current".  It's not an overlapping selection request, so the automated delete won't work - so I'm open for suggestions.
    Thanks,   Ken

    In the InfoPackage settings - Data Target tab, use the Automatic loading of similar/identical requests option.
    Instead of deleting "overlapping", you can request selection through the routine using the following tables:
    rsreqdone contains the request numbers and the InfoPackage technical name.
    rsseldone contains request numbers and their selection criteria.
    Use something like this:
    TABLES: rsreqdone, rsseldone.
    DATA:   itab_rsseldone TYPE rsseldone,
            itab_rsreqdone TYPE SORTED TABLE OF rsreqdone WITH NON-UNIQUE
            KEY rnr WITH HEADER LINE,
            v_date TYPE sy-datum.
    *selecting all requests from RSREQDONE that were loading from this infopackage
    select rnr from RSREQDONE into table itab_rsreqdone
    where LOGDPID = 'Current Infopackage Technical Name'.
    loop at itab_rsreqdone.
    *selecting all these requests + selection criteria from RSSELDONE
    select single * from rsseldone into itab_RSSELDONE
    where rnr = itab_rsreqdone-rnr.
    if sy-subrc EQ 0.
    v_date = sy-datum.
    *if the Month Selection criteria is less than the current system month
    *then delete request from target.
    if itab_RSSELDONE-low(6) < v_date(6).
    *all requests remaining in l_t_request_to_delete are deleted from the data target
    l_t_request_to_delete-rnr = itab_rsreqdone-rnr.
    append l_t_request_to_delete.
    *do not delete the actual request
    DELETE l_t_request_to_delete WHERE
    rnr = l_request.
    clear p_subrc.

  • HT1947 Why can't I see all songs for an artist when using iPad remote for home sharing music through apple tv.

    Why can't I see all my songs for an artist when I search by artist using iPad remote? I'm listening to music via home sharing through apple tv using iPad 2 as my remote. All my songs seem to be listed fine under "songs", but when I select "artist" many of the songs I have for that artist are not there, any idea why that is or how I can fix this.....I suspect it's because many songs may not be associated with an album and it seems only songs in albums are displayed when I search by artist.

    Thanks Ferretbite, but that's not the issue in my case, the songs are not part of a compilation. I just checked several of them and the "Part of a compilation" box is seems as if the song does not have an album associated with it, it will not display under the artist when I search by artist on the iPad remote which REALLY stinks.
    Hope someone else might have a solution.

Maybe you are looking for