Retrieving my mail via a PC

When travelling abroad I have to switch my data roaming off on my iPod.  When I have no wifi I go to an Internet cafe to retrieve my email.  How do I do this on the Internet cafe's public PC - through a web portal I guess but can't find one.  I particularly wan to retrieve deleted past emails of several months ago as these sometimes contain hotel poking information.

Welcome to the Apple Community
You can receive your iCloud email by logging into iCloud.com from the web browser on any computer.

Similar Messages

  • Retrieving Mail via a Proxy Server

    Hello,
    I have just recently arrived at my University's campus. In order to access the Internet they informed me that I needed to configure the Proxy Server, which I understand I did successfully since almost every Web Page loads correctly in Safari.
    Nevertheless, Mail cannot retrieve e-mails from my G-Mail account (the POP settings are correct, because I checked my e-mail via Mail until my last day at home).
    Any help regarding this will be highly appreciated,
    Joan
    P.D. Please bear in mind that the Proxy Server is opened for G-Mail, as I can access it via Safari with no problem. In addition, should any of you have any insights as to why Adium (a multinetwork messaging client) does not connect will be really helpful as well.

    Hola Joan.
    What does “Mail cannot retrieve e-mails from my G-Mail account” mean? What’s the problem exactly?
    It could be that you’ve enabled more proxies than you should, thus causing Mail to try to use a proxy that doesn’t really exist.
    In particular, go to Apple Menu > System Preferences > Network, choose the network interface used to connect to Internet from the Show popup menu and try disabling the SOCKS Proxy in the Proxies section if it’s enabled.
    While you’re at it, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.

  • Why Can't My iMac Retrieve E-Mail from Yahoo?

    I am having persistent difficulties consistently connecting to Yahoo! in order to send and retrieve e-mail.  Nothing has been changed except the password, which I've updated.  I can retrieve e-mail from my Yahoo account via Safari, but for some reason my iMac's mail application cannot.
    Does anyone have any ideas?
    Fred

    Have opened Mail, under Mail select Preferences, select the Yahoo account and delete the password and the renter it?  Some times it is necessary to delete the account then reestablish the account info to clear problems.

  • Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud.  I have verified the settings.  I can access my iCloud account online but can't send or receive e-mail via the mail account.

    Text limits to the "Question" link prevents a full explanation:
    This is a long-time problem.  I have tried to resolve it with Apple but their "Customer Support" is merely a name.
    I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network.  Verify the settings for 'Apple Email' and try again.
    "The server returned the error:  The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
    Well, I have verified the setting and tried again and again and …
    Well, you get the idea …

    JungleTaxi Cabbie wrote:
    Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
    Enter your Incoming Mail Server, User Name, and Password using the following settings:
    Incoming Mail Server: mail.me.com
    User Name: Your iCloud email address (excluding @me.com)
    Password: Your password
    Last Modified: Jun 27, 2013
    Maybe you should test these things before calling people out, because these settings do function perfectly well.
    iCloud is not supported on Snow Leopard or lower, why bother to mention it?
    The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
    The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
    JungleTaxi Cabbie wrote:
    Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
    I never said that there was, perhaps you imagined it.

  • Problem accessing mail via Safari browser

    How do I access iCloud Mail via my Safari browser on my iPhone? If I go to iCloud.com it just offers me the option to install it on my phone.
    The problem is, I already have it installed on my phone and it works fine EXCEPT at my new job - the wifi is not very good and I can access internet/Facebook etc but every time I try and load email it always says it 'cannot find the server .' I therefore tried to access email via safari browser - my other email provider works fine that waybut iCloud doesn't even give me the option to login, just keeps suggesting I install it.
    Any ideas how I can check iCloud email at work? Can't do it on work computers, site is blocked....and there is no 3G/4G signal.
    Thanks for any advice!

    According to http://support.apple.com/kb/PH2618 you should be able to access it via a browser by going to https://www.icloud.com/#mail

  • How can I retrieve a mail message that was accidentally deleted.  It's not in the trashcan.

    How can I retrieve a mail message that was accidentally deleted.  It's not in the trashcan. 

    Which trashcan, mail or osx

  • Can't Attach Files in 10.9 Mail via Menubar/Toolbar

    All of a sudden I cannot attach files in Mail via menu commands.  A selection (finder) window opens but all items are grayed out (no matter what location).  I can still attach files by dragging them from the Desktop (or other location) into the body of the email.
    Isolation:
    -Issue persists in Safari when logging into webmail.
    --Choosing to "attach" a file to an email (new composure or reply) from the webmail attach links brings up a Finder window with all content grayed out.
    -Created test admin user.
    --logged in as new user.
    --set up Mail w/ an email account.
    --attempted file attachment from menubar/toolbar icons.
    --works.
    ***issue is user specific.
    Resolution:
    -Access primary user ~/Library/Preferences/.
    --locate files named "com.apple.finder" .plist (may have multiple files w/ additional characters).
    --select all and move to Trash.
    --Restart.
    -log in and test.

    E. Van Meter wrote:
    Recently installed OX X 10.5 Leopard and ever since, I can't attach files to outgoing Gmail emails.
    I've tried in Safari, Camino and Firefox -- no luck.
    It does work if I switch to the "older version" of Gmail.
    Does anybody know if there's a setting I can change so I can use Gmail normally but be able to add attachments to mail?
    Anybody else having this issue?
    Your profile indicates you are running a very old version of Leopard which might explain the issue.
    Update to 10.5.8 using the combo update (not the auto software update) and see if that fixes your problem.

  • Can't send e-mails via Mail with a Gmail e-mail address using Sky internet

    Can anyone help? My brother has an iBook G4 Mac OS X 4.1 and is trying to send e-mails via Mail with a Googlemail e-mail account. He is using Sky for his broadband. I assume it has something to do with his outgoing smtp e-mail Preferences in Mail, but for the life of me I can't figure it out. He can receive e-mails OK, its just that when he tries to send he gets the 'server can't send error'. Any ideas?

    Here's my gMail IMAP SMTP settings...
    smtp.gmail.com
    Port 25
    Authentication: Password
    SSL
    Sky may require another port to pass through...
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

  • I cannot retrieve my mail from the verizon website

    I have a question. When I am at a different computer how do I retrieve my mail. I logged in and put my username and password in. Everything shows up but all my messages arent' in the inbox. It is blank...Only my home computer has messages in it.

    maddie7 wrote:
    I have a question. When I am at a different computer how do I retrieve my mail. I logged in and put my username and password in. Everything shows up but all my messages arent' in the inbox. It is blank...Only my home computer has messages in it.
    Sounds like you're using a pop3 client on your home machine with the settings set to remove immediately off server once delivered to client.

  • I am unable to Send E-mail via Default mail app in my iphone. IOS7, i have account of icloud, Gmail, Microsoft all the account are well added, i can recieve e-mails but the massage i send is never sent

    I am unable to Send E-mail via Default mail app in my iphone. IOS7, i have account of icloud, Gmail, Microsoft all the account are well added, i can recieve e-mails but the massage i send is never sent

    Turns out this was a simple set up error for me, although i'd set up mobile me to sync my e mails I had never set up my outgoing message server. Therefore, if I received a message from me.com I could reply no problem, however if the message came from aol.com I couldn't reply.

  • TS3276 Help in setting Apple Mail to receive and send mail via Yahoo mail service

    I would appreciate help in setting up Apple Mail to receive and send e-mails via Yahoo.   Thank you

    Sorry,
    Have you tried the connection doctor? In Mail menu bar under Window connection doctor, this will usually let you know where the problem might be.
    http://support.apple.com/kb/TS3276  Read thru this as well.

  • Java mail api: SendFailedException when trying to send Mail via SMTP

    Hello,
    I'm trying to send a mail via java mail api using a server that requires smtp authentication.
    I'm currently using the following code:
    protocol = "smtp";
    host = "auth.smtp.profimailer.de";
    port = 25;
    String from="[email protected]";
    String to="[email protected]";
    props.put("mail.smtp.host", host);
    props.put("mail.smtp.auth", "true");
    Authenticator auth = new PopupAuthenticator();
    session=Session.getInstance(props,auth);
    MimeMessage message = new MimeMessage(session);
    message.setFrom(new InternetAddress(from,"[email protected]"));
    message.addRecipient(Message.RecipientType.TO,new InternetAddress(to,"ToName"));
    message.setSubject("Hello JavaMail");
    message.setText("Welcome to JavaMail");
    Transport.send(message);
    static class PopupAuthenticator extends Authenticator {
            public PasswordAuthentication getPasswordAuthentication() {
                return new PasswordAuthentication("e12345676", "mypass");
    }When trying to run this code, I get the following exception:
    D:\eclipse30RC1\workspace\ClassifyIt\bin>java -cp .;../lib/javamail.jar de.jwannenmacher.classify.TestMail > test.txt
    javax.mail.SendFailedException: Send failed;
    nested exception is:
    javax.mail.SendFailedException: Sender "[email protected]" <jens
    @jens-wannenmacher.de> was rejected: 501
    at javax.mail.Transport.doSend(Transport.java:223)
    at javax.mail.Transport.send(Transport.java:92)
    at de.jwannenmacher.mail.pop3client.POP3Client.getAllNewMessages(POP3Cli
    ent.java:176)
    at de.jwannenmacher.classify.TestMail.main(TestMail.java:22)
    Any suggestions on this?
    Thanks and best regards,
    Jens

    Hi,
    yes smtp is a standard and I think you could use this with almost every smtp server.
    If your smtp server doesn't require authentication you can access it without an authenticator
    I think...
    Best regards,
    Jens

  • When trying to send E-mail via AOL i get the message "rejected by the server because it does not allow relaying" I have checked settings as per answers to similar question

    When trying to send E-mail via AOL i get the message "rejected by the server because it does not allow relaying" I have checked settings as per answers to similar question

    From which account does the email not send?  When sending from an account, the iPad will first try to use the aoutgoing server for that account.  If it can't it will try the other accounts listed.in the setting on the iPad for that account.  It soulds like the server for the account is not working and that the alternate server is resjecting the messag since it did not originate ffrom the account associated with that server,  That is to prevent sending spam.

  • Send a mail via ABAP program

    Hello Experts,
    I want to send mail via ABAP program with the following requirements :
    1. Recipient is OUTLOOK email -id
    2. Sender address has to be an external email-id
    3. Send mail as CC and BCC also to other email-id.
    Is there any function module which can satisfy all the above requirements.
    Regards,
    Mansi.

    hi,
    this code will definately help you just go through it:
    firstly  exported the data to memory using the FM LIST_FROM_MEMORY.
    CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
    listobject = t_listobject
    EXCEPTIONS
    not_found = 1
    OTHERS = 2.
    IF sy-subrc 0.
    MESSAGE e000(su) WITH text-001.
    ENDIF.
    then i converted it into ASCII using LIST_TO_ASCI,
    CALL FUNCTION 'LIST_TO_ASCI'
    TABLES
    listasci = t_xlstab
    listobject = t_listobject
    EXCEPTIONS
    empty_list = 1
    list_index_invalid = 2
    OTHERS = 3.
    IF sy-subrc NE 0.
    MESSAGE e003(yuksdbfzs).
    ENDIF.
    This gives the data in ASCII format separated by '|' and the header has '-', dashes. If you use this internal table directly without any proccesing in SO_NEW_DOCUMENT_ATT_SEND_API1, then you will not get a good excel sheet attachment. To overcome this limitation, i used cl_abap_char_utilities=>newline and cl_abap_char_utilities=>horizontal_tab to add horizontal and vertical tabs to the internal table, replacing all occurences of '|' with
    cl_abap_char_utilities=>horizontal_tab.
    Set the doc_type as 'XLS', create the body and header using the packing_list and pass the data to be downloaded to SO_NEW_DOCUMENT_ATT_SEND_API1 as contents_bin.
    This will create an excel attachment.
    Sample code for formatting the data for the attachment in excel format.
    u2022     Format the data for excel file download
    LOOP AT t_xlstab INTO wa_xlstab .
    DESCRIBE TABLE t_xlstab LINES lw_cnt.
    CLEAR lw_sytabix.
    lw_sytabix = sy-tabix.
    u2022     If not new line then replace '|' by tabs
    IF NOT wa_xlstab EQ cl_abap_char_utilities=>newline.
    REPLACE ALL OCCURRENCES OF '|' IN wa_xlstab
    WITH cl_abap_char_utilities=>horizontal_tab.
    MODIFY t_xlstab FROM wa_xlstab .
    CLEAR wa_xlstab.
    wa_xlstab = cl_abap_char_utilities=>newline.
    IF lw_cnt NE 0 .
    lw_sytabix = lw_sytabix + 1.
    u2022     Insert new line for the excel data
    INSERT wa_xlstab INTO t_xlstab INDEX lw_sytabix.
    lw_cnt = lw_cnt - 1.
    ENDIF.
    CLEAR wa_xlstab.
    ENDIF.
    ENDLOOP.
    Sample code for creating attachment and sending mail:
    FORM send_mail .
    u2022     Define the attachment format
    lw_doc_type = 'XLS'.
    u2022     Create the document which is to be sent
    lwa_doc_chng-obj_name = 'List'.
    lwa_doc_chng-obj_descr = w_subject. "Subject
    lwa_doc_chng-obj_langu = sy-langu.
    u2022     Fill the document data and get size of message
    LOOP AT t_message.
    lt_objtxt = t_message-line.
    APPEND lt_objtxt.
    ENDLOOP.
    DESCRIBE TABLE lt_objtxt LINES lw_tab_lines.
    IF lw_tab_lines GT 0.
    READ TABLE lt_objtxt INDEX lw_tab_lines.
    lwa_doc_chng-doc_size = ( lw_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
    lwa_doc_chng-obj_langu = sy-langu.
    lwa_doc_chng-sensitivty = 'F'.
    ELSE.
    lwa_doc_chng-doc_size = 0.
    ENDIF.
    u2022     Fill Packing List For the body of e-mail
    lt_packing_list-head_start = 1.
    lt_packing_list-head_num = 0.
    lt_packing_list-body_start = 1.
    lt_packing_list-body_num = lw_tab_lines.
    lt_packing_list-doc_type = 'RAW'.
    APPEND lt_packing_list.
    u2022     Create the attachment (the list itself)
    DESCRIBE TABLE t_xlstab LINES lw_tab_lines.
    u2022     Fill the fields of the packing_list for creating the attachment:
    lt_packing_list-transf_bin = 'X'.
    lt_packing_list-head_start = 1.
    lt_packing_list-head_num = 0.
    lt_packing_list-body_start = 1.
    lt_packing_list-body_num = lw_tab_lines.
    lt_packing_list-doc_type = lw_doc_type.
    lt_packing_list-obj_name = 'Attach'.
    lt_packing_list-obj_descr = w_docdesc.
    lt_packing_list-doc_size = lw_tab_lines * 255.
    APPEND lt_packing_list.
    u2022     Fill the mail recipient list
    lt_reclist-rec_type = 'U'.
    LOOP AT t_recipient_list.
    lt_reclist-receiver = t_recipient_list-address.
    APPEND lt_reclist.
    ENDLOOP.
    u2022     Finally send E-Mail
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = lwa_doc_chng
    put_in_outbox = 'X'
    commit_work = 'X'
    IMPORTING
    sent_to_all = lw_sent_to_all
    TABLES
    packing_list = lt_packing_list
    object_header = lt_objhead
    contents_bin = t_xlstab
    contents_txt = lt_objtxt
    receivers = lt_reclist
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8.
    Hope it will help you
    regards
    Rahul sharma

  • When I try and send an e-mail via the PDF in print it gives a warning

    When I try and send an e-mail via the PDF in print it gives a warning saying :
    “” does not appear to be a valid e-mail address. Verify the address and try again.
    For whatever reason it is putting a "" in front of the address that I get from the address book.
    There is nothing in my previous recipients and if I copy and paste the info from the e-mail to another e-mail from mail directly the address is fine and it sends without and problems.
    Any ideas or web site I can visit to remove this ?
    Greg

    Quote :  So you start typing in the recipients name and it puts the name in quotes?
    Yes.
    As is normal, I type in a few letters and the auto fills in the name and the name is highlighted in blue as always.
    It does not happen if I send it from the SHARE dropdown.
    However in the SHARE I have to send all the pages.
    I have to use the FILE dropdown and then the PRINT, pick the first page (single) and then go to the MAIL PDF.
    That is the one I am having the issue with.
    Thanks for taking the time to help.
    Greg

Maybe you are looking for