Retrieving the Old Version of a Standard Table DPR_LOCATION

Hi All,
I have changed the primary key of a standard table DPR_LOCATION using the acces key.
Now I want to revert to the original version. When I use the Version Management and trying to retrieve the original version I am getting a message that Primary key change not permitted for value table DPR_LOCATION.
Please advise how can I return to the original version provided by SAP.

Hi Sandy,
Apart from Thomas, Other thing is that if you are adding a key to primary keys of a table which already have data, will allow to add one. But if you want to reduce the number of primary keys from the database table, it will not allow you to do that.
Reason is - when you removing one field from the primary key, existing data will become inconsistent with the new primary key combinatiion, which is not true for the opposite case.
A possible solution for this is to take backup of data of the table and then delete all the data from the database table.
When table will not having any data then it will allow to change the primary key.
then again upload the data by writing a simple upload program or manually if data is very less.
Regards,
Akhil

Similar Messages

HT1947 Remote app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required. Where can I get the (old) version that runs on my IOS?

'Remote' app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required.
OK, I understand that new versions make use of facilities that come with new versions of IOS, but there is/was a version that runs on 3.1.3 and therefore, I assume 4.2.1. Where can I get the (old) version that runs on my IOS?
The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach. This is my first venture into smart phones, and I like the IOS interface, but I'm not sure I can afford the maintenance.

The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach.
This is standard for Apple. While there is little official mention of the software support lifespan for equipment, typical support has been about 4-5 years for computers. It strikes me that newer items, especially mobile devices, are not built as sturdily nor do they have the hardware upgrade capabilities required to keep up with newer systems. When we bought an iPhone 4S we were told by the person in the store we'd probably be looking at a newer model in two years. The iPhone 3G could be anywhere from 2 to 4 years old, putting it well into.
As for app availability, Apple typically pulls old software versions from its site when new versions appear. If it is a non-Apple app then I guess it is up to the vendor. It is indeed tiresome but it is not at all unusual. Since I only ever run used Macs, I download current versions even though my computer won't run them, stick them on a hard drive, then I have them when I upgrade to a newer used computer. If you run older equipment you have to learn a different mode of operation to exist with the Apple 'new and innovative' but 'forget about the old' philosophy.

If I download the new version of Firefox, will the old version automatically be uninstalled?

This question is so unbelievably basic that nobody has asked it before. But as simple-minded as it may be, I just want to be sure, since if the old version isn't uninstalled, I'm not sure how to make that happen.
Thank you.
Eric

If you install a beta version, by default it will not replace the existing version and is installed in its own directory. If you download a release version, it will by default be installed in the standard installation directory and will replace what was previously installed.

Upgrading leaves the old version installed. Why and can I get rid of it?

I had SQL Server 2008 R2 installed on a Win7 box, and upgraded it to SQL Server 2014. All seems to have gone well, but in the programs menu I can see that SSMS 2008 R2 is still installed. For some reason, I seem to have SQL Server 2012 installed as
well, which is clever as I never installed it! I don't know if this came with SQL Server 2014, but I now seem to have
three versions of SQL Server installed!
Is there any reason why the old versions weren't uninstalled? Surely once I've upgraded, I don't need all the old stuff. Can I safely uninstall anything related to 2008 R2 and 2012, or will this cause problems?
Thanks
FREE custom controls for Lightswitch! A collection of useful controls for Lightswitch developers (Silverlight client only).
Download from the Visual Studio Gallery.
If you're really bored, you could read about my experiments with .NET and some of Microsoft's newer technologies at
http://dotnetwhatnot.pixata.co.uk/

Hello, thanks for the reply. The summary.txt file contains the following...
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Start time: 2015-01-13 21:53:26
End time: 2015-01-13 21:53:32
Requested action: RunDiscovery
Machine Properties:
Machine name: MIRABEL
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033
Express Edition 10.3.5520.0 No Yes
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033
Express Edition 10.3.5520.0 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Database Engine Services 1033
Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 Management Tools - Basic
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 Management Tools - Complete
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Connectivity
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Backwards Compatibility
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 Integration Services
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 LocalDB
1033 Express Edition 12.0.2000.8 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: K:\x64\setup\
Installation edition:
User Input Settings:
ACTION: RunDiscovery
CONFIGURATIONFILE:
ENU: true
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
QUIET: false
QUIETSIMPLE: false
UIMODE: Normal
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150113_215326\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
FREE custom controls for Lightswitch! A collection of useful controls for Lightswitch developers (Silverlight client only).
Download from the Visual Studio Gallery.
If you're really bored, you could read about my experiments with .NET and some of Microsoft's newer technologies at
http://dotnetwhatnot.pixata.co.uk/

How can I drag contacts into numbers like the old version?

How can I drag contacts into numbers like the old version?

Copy and paste works. But drag and drop is also back in version 3.2. It works well here. Just drag and drop onto the canvas.Make sure you've upgraded to version 3.2 as earlier versions of Number 3 did not support drag and drop from Contacts.
Note that the column headers are misaligned if you are dragging contacts that do not contain an image. But the information in the body of the table drags in correctly.
SG

Will the transfer of files be straightforward from the old version to CS6?

I’ve been using DW MX 2004 since, well 2004 and now thinking about CS6. But is the transfer of files from the old version to the new going to be problem free? I notice that CS6 has liquid layout, and am thinking how my existing templates are going to respond.
Also, DW MX allowed me to use the software on the PC and laptop on the one licence, would this still be permissible does anyone know? I would only be the only user and the software would never be run at the same time on both machines.

HTML is HTML, so DW will have no problem reading or using your old files, including your old template files (although template syntax has changed radically - I forget whether DW will automatically upgrade your templates or not). Are you going to install the CS6 on the same computer that is running MX2004? If so, then your sites should transfer as well. But just to be safe, you should use Site Manager in MX2004 to export the site definitions of ALL your sites (including the FTP info) to a safe place on your computer so that you can then import those definitions into CS6. Your sites' files themselves will not be affected by this update.
Be aware that CS6 is VERY VERY different than MX2004. You must bring a fair familiarity with HTML and CSS to the table when you are using CS6. Many of the things that you could do in MX2004 will require the use of CSS to do in CS6. In addition, CS6 is very focused on valid HTML, and you must bring some familiarity of that too.

HT4970 does any one else miss the month at a glance that the old version of reminders had? I wish Apple would bring that feature back.

Does anyone else miss the month-at-a-glance feature from the old version of Reminders app? I wish Apple would bring that feature back. It made it very convenient to schedule for the future.

You can send feedback and let Apple know
http://www.apple.com/feedback/

Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! They said it should be pulsating but it's not

Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! I already read some reviews and discussion about this. They said that the lightning bolt should pulsate when charging but it's not!

Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
What is using data, unsolicited, every 6 hours?
Why does it change?
Why does it only happen on the iPhone 5 series and not the 4?
Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ...

I did an upgrade from 4.0 to the new 6.0 about 5 months ago. After the upgrade installed it said reboot system to apply upgrade. Now it wont open and keeps telling me that the older version needs to shut down the computer and upgrade the old version.

Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

How do i uninstall CS2 - the old version doesn't open on my macbook pro i am reinstalling an updated version

how do i uninstall CS2 - the old version doesn't open on my macbook pro i am reinstalling an updated version

You simply trash it.
Mylenium

I downloaded the new Firefox for my Mac and it won't open. I deleted the old version. What am I doing wrong?

I can't get firefox to open now that I erased the old version and tried to install the new version (6.0.2) on my Mac. I was hoping I could update it and have my bookmarks and everything intact, but when I drag the firefox symbol into my dock it won't do anything after downloading. I have put it in the trash to delete it and re-downloaded it, but nothing seems to help. On top of it, the fan on my computer goes on when I am trying to get firefox to work ????
Thanks!
Ty

Hi,
as I’m using a Mac so I have download the file with .dmg extension, which is the one that currently doesn’t work.
I also tried to download the .exe one, but as expected when I double click on it, I have an error message that confirmed Windows is not supported.
Ale

I can't replace an old version of Firefox with a new one that I just downloaded. It says I don't have permissions to do so, and the old version can't trashed.

I've downloaded the new version, and when I go to drag the Firefox icon into the Applications folder, I'm prompted to replace the old version. When I do, it says, "The operation can’t be completed because you don’t have permission to modify 'Firefox'." I've looked everywhere, and every help forum says to just drag Firefox into the Trash. I've tried that, and it says that Firefox can't be trashed. I don't know if this means anything or not, but there is a small lock in the bottom left of the Firefox icon in my dock.

Try to drag the current Firefox application to the trash if you can't replace it.

I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues

What do I do when I go to download the new version after deleting the old version and it keeps telling me to restart my computer but when I do it still won't install the new version?

My son installed a toolbar and I uninstalled it but it didn't disappear. A friend told me if I uninstall firefox and re install it, that the toolbar would be gone. I uninstalled firefox and went to reinstall it and it told me I had to restart to get rid of the old version completely, I restarted my computer and tried to install it again and it keeps coming up with the "you must restart your computer" thing. I have restarted my computer at least 20 times and it keeps happening and I cannot install firefox and its making me mad cause I hate using IE but if I can't figure it out I am going to be forced to use it instead of Firefox :(

If the toolbar installed something into the rest of the system, you will see an entry in the Control Panel in the software uninstall applet which should be removed. You might need to make a new profile if you cannot find an extension that has something to do with the toolbar.
http://kb.mozillazine.org/Uninstalling_toolbars

I have downloaded and put the new version of Firefox in to my applications. But every time I open it on my mac, it says I am still runnung the old version. I have rebooted several times, but it still is not the new version I keep downloading.

When I open FIrefox, it asks me to upgrade to the new version. I download it, and move it to my applications file as directed. Then I restart, and it goes back to the old version. I have a macbook pro. What should I do to get the newer version to run?

You need to install Office on the computer from the installer DVD or disc image you purchased.

Retrieving the Old Version of a Standard Table DPR_LOCATION

Similar Messages

Maybe you are looking for