Retro payroll processing for org unit cost centre changes

Dear All,
We have created some new cost centres and assigned  it to relevant org units . when we run payroll , retro run is happening from the period we changed the cost center and assigned the new cost centre to the org units . please suggest a solution
regards
Tressya

Hi Tressya,
changes in IT0003 won't affect retro calculation, since you have already created result periods for retro calculation. The payroll programm will detect this and allways will repeat the retro unless you delete those results first.
Try TR PU01 during correction - then clear Earl.pers. RA date  by PU03 (PA30 won't work here)
After that you hou'll have to repeat payroll run for effected employees to get new results for actual period only.
regards
J.

Similar Messages

  • Org.Unit & Cost Centre

    Hi Experts,
    We hav uploaded the Org.Units and Cost Centres Data by using BDCs but both the objects r not displaying in IT:0001.
    Pls let me know your thoughts.
    Thanks

    Hi Rajesh,
    Check weather the switch is active in T77S0 for PLOGI PLOGI to`X` to activate OM & PA integration.
    Try to run Following reports:
    -Using report RHINTE00, you can create objects in Organizational Management from the Personnel Administration infotype 0001 ("Organizational assignment"). In doing this, the following relationships are created:
    oCost center and organizational unit or position
    oPosition and organizational unit, job or person
    -Using report RHINTE10, you can transfer the objects you created in Organizational Management to tables in Personnel Administration.
    -Using report RHINTE30, you can update the "Organizational assignment" infotype (0001) for the personnel number you have selected, with the data you created in Organizational Management (by executing report RHINTE10).
    -Using report RHINTE20, you can check whether the objects relevant for integration are set up both in Personnel Administration as well as in Organizational Management.
    and also execute RHINTECHECK report to check the consistenacy of the Data
    regards

  • No entries for org unit, job or position in T5KWB

    Hi Experts,
    I am running payroll for canada , i am getting this error for 2 employees for whom the org assignment been chaged recently -
    now they are giving , kindly help me - i have checked this table T5KWB and it dosnet hold value maintained for org unit
    50737186
    KTXDM Canadian Tax Infotypes Data Management
    Input
    P0461
    P0462
    P0463
    P0464
    Processing
    No entries for org unit, job or position in T5KWB
    Search in organization structure failed
    Check T5KWB for org unit 50737186 or higher-level org unit for 20101031
    Thanks
    Jay

    Hi Jay
    Get the position of the employees for whom you are getting the error message and maintain infotype "Canada Groups for WCB" for those positions. This should solve your issue.
    You may want to go through below link:
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/WCB
    Hope this helps
    Best Regards
    Reddy

  • Remove Actions for Org Unit & Positiin in Succession Planning.

    Hi,
    We are in process of implementing Nakisa 3.0 SP1.
    In succession planning, we want to remove few actions for org units & position. I tried to look for the configuration of the same in admin console in detailed configuration for my positions & my org units, but could not find it. Please help.
    Thanks
    Prashant

    Hi Prashant,
    Do you mean the items in the Actions drop-down menu on the OrgUnit/Positions details panels? This cannot be done in the AdminConsole. You need to go to the <build>\AppResource\linkconfiguration folder and copy the files you want to change to <build>\.detla\AppResource\linkconfiguration folder and then change them.
    I believe the files you want are SAPOrgUnitDetailsConfiguration.xml and SAPPositionDetailsConfiguration.xml. Just delete or comment out the lines for the actions you want to remove.
    Best regards,
    Luke

  • Multi Languages for Org Unit

    Hi experts,
    Is it possible to have 2 sets of language for abbr and name in IT1000 for org unit in the same period?
    example:
    Start Date : 01.01.2008
    Language: English
    Abbr: HR
    Name: HR department
    Start Date : 01.01.2008
    Language: Chinese
    Abbr: HR
    Name: HR department (Chinese)
    Regards,
    Joanna

    Hi,
    It is possible.
    But before that need to chk with basis guys whether unicoding is enabled or not.
    If Yes the chk chineese script is enabled or not.
    If yes then maintain the orgunits in english language by entering SAP in English language (U can find the language seletion field in log in screen).
    Upload the orgunits. then go to Tcode RE_RHTRANS0 to put the names in Chineese.
    This is one option.
    2nd option is prepare the excel sheet with Chineese language with orgunit keys. Log in into SAP in Chineese language.
    Upload the data.
    ~BiSu

  • G/L account for issue to cost centre-FERT

    Hello friends,
    here I have an issue,
    when I am running the transaction MB1A with mvt type 201,two G/L accounts getting updated, one is inventory that is assigned in OBYC , in transaction BSX.
    Another G/L account  is 'for' issue to cost centre,' where it is assigned.
    Can somebody give me the solution?
    regards,
    Seetaram Functional consultant.

    Hi Friend,
    You should assign it to OBYC Account Assignement. GBB - VBR (Internal Goods Issue such as Cost Center or Order). Also check OKB9. Whether cost element has been assigned to Cost Center.
    I hope this found useful to you.
    Regards,
    Jigar

  • Screen or Report that shows all Responsibilities for Org Unit

    How can we find out in Oracle application from the front end,,,, the screens... or may be report that shows all responsibilities for ORG Unit ‘Vision Operation’ (204).
    SELECT FR.RESPONSIBILITY_NAME, FPOV.PROFILE_OPTION_VALUE ORGID, NAME ORG_NAME
    FROM FND_PROFILE_OPTIONS FPO,
    FND_PROFILE_OPTION_VALUES FPOV,
    FND_RESPONSIBILITY_TL FR,
    HR_ALL_ORGANIZATION_UNITS HOU
    --HR_OPERATING_UNITS HOU
    WHERE --UPPER (FPO.PROFILE_OPTION_NAME) LIKE UPPER ('MO%OPERATIN%')
    PROFILE_OPTION_NAME = 'ORG_ID'
    AND FPO.PROFILE_OPTION_ID = FPOV.PROFILE_OPTION_ID
    AND FPOV.LEVEL_VALUE = FR.RESPONSIBILITY_ID
    AND HOU.ORGANIZATION_ID = FPOV.PROFILE_OPTION_VALUE
    the above query displays the data from the backend,,I want to see how to see that data from the front end,, does anyone know the navigation, thank you so much in advance.

    Hello Kashif,
    Thank you for the reply. So, there is no screen that shows all the responsibilities that are assigned to a operating unit.
    The link that you provided really did not give any information that i was looking for.
    And as you said .. "there is no specific screen to show all except responsibilities form".... what does the responsibilities form show,
    I have also tried to look in the System Administrator -> Profile -> System
    and in the Responsibility, I query for Payables manager, and look which Orgs are assigned to it, I am not able to find it. I know I am wrong, but can you please help me how to see which responsiblity is assigned to which Operating Unit.
    Thank you

  • CRMD_BUS2000108 - organizational unit and attributes for org. unit

    Hi all!
    As I'm customizing Lead creation (and in a second step lead generation)
    I would like to receive tips about "selection of organizational unit and attributes for org. unit".
    I expected that, by entering a BP number of a prospect or sold-to party, the organizational unit and its attributes would be displayed automatically on the tab "organization".
    This is not the case. When I start the lead creation, there is a pop-up screen inviting me to choose the organizational unit. afterwards a pop-up screen for the attributes of the org unit. Only after setting a flag in both pop-ups, I see the actual "lead" transaction. When I enter a BP number, the sales assistant and sales rep are found automatically.
    Could anybody please explain how to change the customizing?
    I would like to see the lead transaction (create) first, enter a bp number and than have the org unit and its attributes, the sales rep and sales assistant found automatically.
    Any usefull answer (would make my day ), will be rewarded.
    Thank you very much for your suggestions and time in advance!
    I. Van Acker

    hi
    this is happening because you have not done the org data determination in your transaction,just go to SPRO and there in org data determination ,you have many standard ORGMAN rules available which you can use which will pick the data according to the user ,BPs etc.
    it will enable you to first give BP and then the org data will be driven automatically from the system according to the rule in org data determination.
    so first go and use rule ,try using rule ORGMAN_12
    then attach this rule to the org data profile and then add this org data profile to the transaction in basic settings in transaction where you have defined your lead transaction.
    it will solve your purpose
    best regards
    ashish

  • HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT

    HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT
    Regards,
    Kumar

    HAI..
    External number assignment
    If you want the user to assign the numbers, enter "EX" in the 'NR' field. The number ranges are then indicated by the letters "EX".
    Number assignment for plan version 10 / object type S: Subgroup 10S

  • Infotype for org.unit

    hallow
    i wont to buield infotype for org.unit
    i thihnk i have to use ppci or ppcj but i dont now how
    please help
    regards

    Hi Antonio,
    Why you want to separetly create Infotype for Organizational Units???
    Once you create them through simple maintainince by default 1000 & 1001 will be maintained. If you create Org Unit through Expert Mode you need to maintain them mannually. And select from the Infotype Menu which ever Infotype you want to maintain.
    Regards
    Pavani
    <b>Remainder: Points to be given on Answers</b>

  • The bp id for org unit does not exist

    Dear expert,
    after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
    in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
    what can we do to solve the issue?
    will there any impact if we keep no bp id for the org unit?

    Hi,
    You can use the transaction CRM_OM_BP_INTEGRATE.
    Select the Org unit and enter the org id in the input field and execute it.
    Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
    Regards,
    PP

  • BP number is missing for org units in org model

    Hi Guys,
    I have created org model in PPOCA_CRM and saved it CRM7.0. But BP numbers did not get generated for org units which I have created.
    Can any one suggest me what is the reason and what needs to be done in order to get BP numbers for already created org units in PPOCA_ CRM or PPOMA_CRM.
    Thanks for you help,
    JM

    Go to CRM IMG->Cross Application components->SAP Business partner->Business Partner->Number Ranges and Groupings->Define Groupings and Assign number ranges.
    There check if any number range is defined with the "Int Std grouping" . If it is not define it.
    and in SM30 for "T77S0" for entries HRALX/OSUBG assign a number range.

  • Actions for Org.Units, Jobs and Positions

    Dear All,
    I know how to create or copy the available actions for Org Units , Jobs and positions thro' the table T777M and run them through PP03.
    Once I do it , when I want to skip some of the relationships it doesnt allow me to , the next page tab is grayed out.
    I mean if we have for ex. a position reporting to a position and because he is, say CEO and I want to skip that relationship I am unable to , how to activate the skip or Next page tab ??
    Regards
    Uday

    Hi,
    Goto table T77IV click on maintain, Click on New Entries >> Enter the subgroup ( PVOB) PV - Plan Verson and OB is for Object you want to maintain the number ranges for eg : 01C for Job. >> Enter and save the record...
    It will take u to the next screen  >> Click on maintain intervals >> Click on Add Intervals >> New screen will appear ... enter the details as below :
    NO    From Number   To Number     Remarks
    01      1                     19999999        This is Object range
    Note : do not enter anything in "Current Number" &  Do not select "Ext"
    I hope this will help you....
    regards,
    Navinkumar

  • Search help for org units

    Hi,
    I'm looking for a tree search help for org units without organisational controls.
    Actually I'm using the search help 'RH_TYPE_STRUC_HELP' but the units are only the units directed by the user. For one of the specific infotype, I need to let the user select an unit that is not in his own structure... to save an information like "I don't want to work here".
    Have you got some function that can help me ??
    Thanks,
    Christophe.

    Hi
      I want to know only the parent org units existed at company code level or Personnel area level for the position search hlep and not the org units and positions relationship

  • Personnel Cost Planning: creating cost item for Org unit

    Hi experts,
    I am trying to attach a cost item to an org unit by maintaing feature hcp02 but the somehow the cost item applies itself to both org unit and position. Could anyone please let me know the how this can be done?
    Thanks

    It is extremely difficult to answer your question without knowing all the details of your scenario.
    I can briefly explain the scenario I used:
    1. I have maintained IT1005 on job level to further distribute this information along the organization structure.
    2. First of all i had to run data collection on job level using method "Infotype planned compensation: 1005" and cost item that was a base for other items, e.g. basic salary. System creates records in infotype 5010 "Planning of Pers. Costs" for evaluated jobs.
    3. Then I collected cost items for positions using method "Data from related cost planning objects", calculation type A, basis that I previously set up, evaluation path O_O_S_C (I started from head org.unit) and object type source C. I did it for positions to have possibility to adjust cost items on position level using transaction PHCPDCUI - Edit Data, e.g. you can ask managers to review your defaults on position level before staring consolidation on org.unit level.
    4. Then you start data collection on org.unit level using cost items on position level. Process similar to step 3 but with different evaluation path and source object.
    5. When it's done you run cost planning (PHCPADMN - Manage) using special plan for planning based on OM data.
    There are plenty of other scenarios, so can't really give you exact answer on your question, as I don't which scenario you use.

Maybe you are looking for