Returns to the state of departure
Hi
When I reload the browser page it returns to the state of departure set in Flash Bilder even if it is for the authentication state of the beginning and we lose the session.
I used Flash Bilder
No.
Similar Messages
-
i bought an ipad mini from some guy returning to the states and when i upgraded its os version its now asking for his apple id which i dont have. what should i do
That is Activation Lock.
You have to contact the previous owner to have him remove it
Find My iPhone Activation Lock: Removing a device from a previous owner -
I had been in Canada and obtained my i4s. I created my Apple ID using my normal email address. I returned to the States and still had my Canadian number. I was told the Canadian version of the iPhone 4s would not work with any phone company in the States, so I had to purchase yet another phone and create another Apple ID.
I have since deactivated the Canadian number. I cannot deactivate that Apple ID though. So I am stuck with two (2) Apple IDs. (not to mention 2 iPhone 4s)
I would very much like to only have one assiciated with the phone I have now. Is there a way to deactivate one of the Apple ID accounts?Welcome to the Apple Community.
I'm not sure you needed to purchase a new phone, you certainly didn't need to create a new ID.
However now you have done, you can't de-activate the old account, just log into your new one and stop using your old one. -
Can I return my iPad in the states if I bought it at an apple store in the UAE because I wasn't aware it didn't come with FaceTime at the time?
Your only option is to sell the iPad and buy a new one.
Apple Reuse and Recycle Program
http://store.apple.com/us/browse/reuse_and_recycle
How to Sell Your Old iPad http://tinyurl.com/85d69lk
Other sources to sell.
eBay Instant Sell http://instantsale.ebay.com/?search=ipad
Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
Sell Electronics for Cash - Next Worth http://www.nextworth.com/
Buy My Tronics http://www.buymytronics.com/
Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
Totem http://www.hellototem.com/
Cheers, Tom -
Hello, I have an Iphone 3GS and can't connect to Game Center. It recognizes my apple ID account, states it was never used with Game Center. Then asks for country, birthdate, then returns to ask country again, then birthdate, and returns to the loop. Never ends the loop unless I cancel the setup process. I have restored the iphone to the factory settings and restored the backup, but did not work. Any suggestions on what can be the problem? thank you.
I just read another post that says you can go into a game that allows for multiple players and utalizes game center and enter your account information that way. I haven't tried it yet, but it seems to work for others that had this issue.
-
How can I return to the initial text state in a UITextView? a UITextField
For iphone 4, the appilications don't really close after they are quited.
The problem is, it will preserve your states of, say, text view.
I want to return to initial state after I quit the view of text view.
For example, after I read a story, I would like it to begin with the first line when I start to read the second time. I don't want to take action returing to the first line.
I wonder if there is a simple way to do so?
Can anyone tell me how?
A thousand of thanks!!sorry, that is not what I want to do.
I want to return to the initial state before I quit the app.
Actually, I want to return to the intial state after I click a row in a table the second time.
Sorry, I didn't say clearly. -
I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?
You cannot return to previous state. The update re-locked the iPhone
to the original carrier. You must contact the original carrier to see if
they offer unlocking and if you qualify.
What does it say when you look at Settings=>General=>Carrier?
Be advised that if your iPhone had previously been hacked/modified/
jailbroken to work with other than original carrier, it may be impossible
for the original carrier to unlock it properly. -
The statement did not return a result set in ireport
Hi,
I am Building a Report in iReport(Jasper Reports). I called a stored procedure from iReport by passing a parameter in Query Editor. I am getting an exception saying "The statement did not return a result set". When
i use Temp Tables in stored procedure i am getting the exception.
If there is no temptable in Stored procedure there wont be any exception.
This is my Stored procedure
Create PROCEDURE [XUSP_REPORT_SOPRINT] @BNUM VARCHAR(20) AS
BEGIN
DECLARE @FQTY BIGINT
DECLARE @ITNAME VARCHAR(100)
DECLARE @COUNT INT=0
DECLARE @COUNT1 INT=0
CREATE TABLE #BILL_PRINT(
[BNUM] [varchar](20) NOT NULL,
[CNAME] [varchar](30) NOT NULL,
[CNUM] [int] NOT NULL,
[ITNAME] [varchar](100) NOT NULL,
[ITEM#] [int] NOT NULL,
[QTY] [int] NOT NULL DEFAULT 0,
[UNIT] [varchar](5) NOT NULL,
[PRICE] [float] NOT NULL DEFAULT 0,
[BASIC] [float] NOT NULL DEFAULT 0,
[DISCOUNT] [float] NOT NULL DEFAULT 0,
[FRQTY] [int] NOT NULL DEFAULT 0,
[BADDR] [varchar](300) NULL,
[CADDR] [varchar](300) NOT NULL,
[BDATE] [datetime] NULL DEFAULT (sysdatetime()),
[BILLBY] [varchar](50) NOT NULL,
[ROUTE] [varchar](200) NULL,
[AMT] [float] NOT NULL DEFAULT 0,
[VAT] [float] NOT NULL DEFAULT 0,
[VAT AMT] [float] NOT NULL DEFAULT 0,
[AMT_AF_DISC] [float] NOT NULL DEFAULT 0,
[AMT_AF_VAT] [float] NOT NULL DEFAULT 0,
[TOT_DISC] [float] NOT NULL DEFAULT 0,
[ROUND_OFF] [float] NOT NULL DEFAULT 0,
[TOT_VAT] [float] NOT NULL DEFAULT 0,
[AMT_UNDER_VAT] [float] NOT NULL DEFAULT 0,
[NETT] [float] NOT NULL DEFAULT 0,
[TOS] [varchar](30) NULL DEFAULT 0,
[CDISC] [float] NOT NULL DEFAULT 0,
[SDISC] [float] NOT NULL DEFAULT 0
insert into #BILL_PRINT SELECT [BNUM]
,[CNAME]
,[CNUM]
,[ITNAME]
,[ITEM#]
,[QTY]
,[UNIT]
,[PRICE]
,[BASIC]
,[DISCOUNT]
,[FRQTY]
,[BADDR]
,[CADDR]
,[BDATE]
,[BILLBY]
,[ROUTE]
,[AMT]
,[VAT]
,[VAT AMT]
,[AMT_AF_DISC]
,[AMT_AF_VAT]
,[TOT_DISC]
,[ROUND_OFF]
,[TOT_VAT]
,[AMT_UNDER_VAT]
,[NETT]
,[TOS]
,[CDISC]
,[SDISC]
FROM [SALES_DETAILS] WHERE BNUM=@BNUM
CREATE TABLE #ITNAME_0
ITEM VARCHAR(100) NOT NULL,
FREE BIGINT NOT NULL
INSERT INTO #ITNAME_0 SELECT ITNAME,FRQTY FROM SALES_DETAILS WHERE FRQTY<>0 AND BNUM=@BNUM
--SELECT * FROM #ITNAME_0
SET @COUNT=(SELECT COUNT(*) FROM #ITNAME_0)
WHILE @COUNT!=0
BEGIN
SET @FQTY=(SELECT TOP(1) FREE FROM #ITNAME_0)
SET @ITNAME=(SELECT TOP(1) ITEM FROM #ITNAME_0)
SET @COUNT1=(SELECT COUNT(*) FROM #BILL_PRINT WHERE ITNAME=@ITNAME AND BNUM=@BNUM)
IF @COUNT1=2
BEGIN
UPDATE #BILL_PRINT
SET FRQTY+=@FQTY
WHERE ITNAME=@ITNAME AND QTY<>0
DELETE FROM #ITNAME_0 WHERE ITEM=@ITNAME AND FREE=@FQTY
DELETE FROM #BILL_PRINT WHERE ITNAME=@ITNAME AND QTY=0
END
SET @COUNT=@COUNT-1
END
--SELECT *FROM sales_details
SELECT *FROM #BILL_PRINT where bnum=@bnum
DROP TABLE #BILL_PRINT
DROP TABLE #ITNAME_0
END
Please help me out in this.
Thanks,
Shreyas MThis is a forum for Reporting Services (SSRS). If you're using Jasper reports then you should be posting in relevenat forums. I'm not sure there would be enough people with Jasper report experience here to help you out!
Anyways in SSRS when we use Temp tables in procedure it will throw exception in editor but when you save and run it will still work fine. Did you try saving it and executing report? Did the error still persisted?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
Closing the Statement returned from ResultSet.getStatement does not work
With the ORACLE JDBC driver, I have discovered (the hard way) that it is essential to explictly close a Statement object after use. (http://www.orafaq.com/node/758 was useful here).
Failure to do so leaves the Cursor open and eventually your application will fail with the ORA-01000 Too Many Cursors error.
That works well if your code still has access to the Statement object which it created when it has finished with the results from executing the Statement.
But, I've inherited some code where this is not the case. The results in the form of a ResultSet are passed through a few layers before it is eventually processed and can then be closed. The original Statement object is no longer available.
I thought then that the solution would be use the ResultSet.getStatement method and to close that Statement.
BUT that doesn't seem to work. The number of cursors continues to go up.
Any ideas, anyone?
(I'm using ojdbc6.jar and ORACLE 10g Express.)
Edited by: Termind on 22-Jul-2010 10:00Copied in second message as first gets unreadable...
eclipse.buildId=I20070625-1500
java.version=1.5.0_18
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE
Command-line arguments: -os win32 -ws win32 -arch x86 -data D:\Dokumente\Projekte\workspace
Error
Tue Sep 29 11:30:49 CEST 2009
Unhandled event loop exception
java.lang.NullPointerException
at org.eclipse.jpt.db.internal.ForeignKey.getReferencedTable(ForeignKey.java:104)
at org.eclipse.jpt.gen.internal.GenTable.addReferencedTablesTo(GenTable.java:106)
at org.eclipse.jpt.gen.internal.GenScope.buildReferencedTables(GenScope.java:169)
at org.eclipse.jpt.gen.internal.GenScope.configureManyToManyRelations(GenScope.java:81)
at org.eclipse.jpt.gen.internal.GenScope.initialize(GenScope.java:46)
at org.eclipse.jpt.gen.internal.GenScope.<init>(GenScope.java:33)
at org.eclipse.jpt.gen.internal.PackageGenerator.<init>(PackageGenerator.java:48)
at org.eclipse.jpt.gen.internal.PackageGenerator.generateEntities(PackageGenerator.java:38)
at org.eclipse.jpt.ui.internal.generic.EntitiesGenerator$GenerateEntitiesRunnable.run(EntitiesGenerator.java:129)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1797)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1779) -
I just returned from vacation in the states and I can't connect to the internet
i can't connect to the internet on my mac air. I know that the internet connection is good because other devices and computers are using it. I'm not sure if it is because I used my computer in the states while I was on computer. Can you help me get back on?
Run the Network Diagnostics assistant. How far do you get?
-
Ignore carriage returns in select statement
Within Oracle Report builder, I am using a select startment
select descr
from atable
"descr" contains carriage returns at the end of the input ie people have enter 'enter' when inputting the data.
how do write the select statement to ignore the carriage return 'enter' contain within "descr".
ThanksSQL> SELECT 'aa' || chr(10) || 'bb' c FROM dual;
C
aa
bb
SQL> SELECT translate('aa' || chr(10) || 'bb', chr(10),' ') c FROM dual;
C
aa bb
SQL> SELECT 'aa' || chr(13) || 'bb' c FROM dual;
C
aa
bb
SQL> SELECT translate('aa' || chr(13) || 'bb', chr(13),' ') c FROM dual;
C
aa bb
SQL> "For Windows"
Message was edited by:
mennan
Message was edited by:
mennan -
Updated image is not continuing with the State Restore Phase
MDT 2010 Update 1
Our MDT guru quit about a month ago. I've done basic stuff here and there
But have never updated an image..
1. I deployed our current image to a Vmware workstation. Added about 200 updates. Nothing else done.
I than rebooted and logged in as local admin and ran litetouch.wsf in a command prompt.
And ran the "Sysprep and Capture image" task sequence.
This sysprep'd and imaged with no errors to the captures folder.
2. I than moved that updated image to the "Operating Systems" folder on the deployment share. Renamed the old .wim file and renamed the new one to be the same as the old one.. (Not completely sure this is the correct
way to do this) But couldn't find any info on how this is done)
I than proceeded to reimage a machine with the updated .wim.
It gets all the way to the State Restore phase and just stops. After the final reboot. I logon with the local admin account as usual and it does not continue. the Minint and _SMSTaskSequence folder are still there.. If
I let it set for hours nothing happens...
I compared the BDD.log file for both images. They seem to be identical up until the State Restore phase is supposed to start.
I see NO errors in the BDD log file...
So I am lost as in what to do to try and remedy this issue..
Info From SharepointIts the new WIM that is not continuing...
I did try the import. and it did the same thing.
here is the ending of the BDD.log file
ZTIConfigure COMPLETED. Return Value = 0 ZTIConfigure 4/22/2014 12:00:53 PM 0 (0x0000)
ZTIConfigure processing completed successfully. ZTIConfigure 4/22/2014 12:00:53 PM 0 (0x0000)
Microsoft Deployment Toolkit version: 5.1.1642.01 ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Write all logging text to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Validating connection to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Already connected to server bimaemg1mdtx64 as that is where this script is running from. ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
No driver copying needs to be performed during the Lite Touch postinstall phase. ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Updating downlevel OS configuration. ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Vista identified, skipping update of Device Path ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
ZTIdrivers processing completed successfully. ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Microsoft Deployment Toolkit version: 5.1.1642.01 ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
Write all logging text to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
Validating connection to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
Already connected to server bimaemg1mdtx64 as that is where this script is running from. ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
Property PHASE is now = STATERESTORE ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
ZTINextPhase COMPLETED. Return Value = 0 ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
ZTINextPhase processing completed successfully. ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
Property DestinationLogicalDrive is now = LiteTouch 4/22/2014 12:00:53 PM 0 (0x0000)
LTI initiating task sequence-requested reboot. LiteTouch 4/22/2014 12:00:53 PM 0 (0x0000)
Info From Sharepoint -
How to tell B1 that the state of a combo doesn't matter?
In the latest update to our B1, I noticed a form with a ButtonCombo on it that says "You Can Also..." and when you click on it, you get a choice of activities you can perform.
I'm trying to replicate that behavior in my add-on, instead of cluttering up the UI with many separate buttons. Doing this is fairly easy and my ButtonCombo works well. The only problem I have is that when the user closes the form after using the button, she is surprised/frightened to be asked if she really wants to cancel without saving the changed data -- even though the only "change" was selecting a function from my ButtonCombo.
My first wish was to simply reset the ButtonCombo after each use, so it would never appear to have been changed, but the API doesn't provide a way to return the button to its default state.
My next idea was to destroy and recreate the button after every use, but the Form object can only have new controls added to it. I can find no way to remove old ones.
Is there any way to tell B1 to ignore the state of the ButtonCombo when determining if anything on the form has changed?Let understand,
does you form have to be binded to the DB? Is it a masterdata or document form?
Or just a form that will be used to perform actions in another objects? If this is the case, it´s simple to achieve what you want. Just remove the databinds and redo it using UserDataSources. With this the system should stop handling this kind of operations.
If the form needs to stil binded to DB, I think you´re not gonna be abble to avoid this kind of messages!
regards,
André Gustavo -
How can I return to the last selected item in a dialog box
In OS 9 using Dreamweaver (for example) when I was adding images to a document, each time I added one the dialog box would return to the last selected image and I could just arrow down to the next in the list, add it (exiting the dialog box) and then repeat the process until I had added all the images in the folder. Now, using OS 10.4, after I add an image, and return to the add image dialog box it goes to the first item in the folder list instead of the last selected item. this really slows the process down, and when I'm adding 100 items or so, it's a real drag. I figure there has to be a way to get the dialog box to return to the last selected item, but I don't know what it is. Help!
sorry, that is not what I want to do.
I want to return to the initial state before I quit the app.
Actually, I want to return to the intial state after I click a row in a table the second time.
Sorry, I didn't say clearly. -
How do I count the number of records returned in the CMIS query
How do I count the number of records returned in the query CMIS?
SELECT COUNT(*) FROM ora:t:IDC:GlobalProfile WHERE ora:p:xRegionDefinition = \'RD_PROJETOS_EXCLUSIVOS\''}
Euler HomeroHi Euler,
interestingly enough, the reference guide for CMIS ( http://wiki.alfresco.com/wiki/CMIS_Query_Language ) that I found does not mention the COUNT function at all. On the other hand it states that: "The SELECT clause identifies which virtual columns to return in the result set. It can be either a comma-separated list of one or more queryNames of properties that are defined by queryable object types or * for all virtual columns."
There are, however, some other posts like e.g. http://alfrescoshare.wordpress.com/2010/01/20/count-the-total-number-of-documents-in-alfresco-using-sql/ which state that they could make it working.
Having asked in the WebCenter Portal forum, I assume that your content repository is WebCenter Content. The CMIS doc for the Content is available here: http://docs.oracle.com/cd/E23943_01/doc.1111/e15813.pdf (no COUNT there either). It does, however, mention explicitly that "CMIS queries return a Result Set where each Entry object will contain only the properties that were specified in the query.". This means your could rather investigate the Result Set. Note that there are also other means than CMIS how to get the requested result set (e.g. calling a search service directly via so-called RIDC).
In the given context I am also interested what your use case is. OOTB CMIS in WebCenter Portal is used, for instance, in Content Presenter, where it is content rather than "parameters" what's displayed.
Maybe you are looking for
-
How can we use the same package in our report used by some other report
how can we use the same package in our report used by some other report
-
hi friends storage bin 01-01-01 stock is 1000 quantity...After PO-GRN all stock is updated in same storage bin 01-01-01... my querys is i want to fill 100 qty should be filled in 01-01-01 storage bin , if quantity excess means remaining quantity sho
-
XP SP3 system. I have Gmail set to always use a secure connection & I've cleared the cache (but not saved passwords) ''was started over here -https://support.mozilla.com/en-US/questions/791872''
-
Unable to upload photos manually to photostream
I have an Apple TV and a iPhone 4S. My goal is view pictures on Applet TV not only just from iPhone but from my SLR camer a as well. I also dont want every picture that I take on my iPhone to be uplaoded to Photostream. Reading at various answers in
-
Insert a splash Screen for a Jbuilder Application
hi all Does Anybody know how to insert a Spash screen to a Jbuilder application. I am doing my software project on Jbuilder version 8 and I have the Frame1.java as the main java file. can anybody give the code for a splash screen and tell me how to i