Revaluation of Activity type is not getting updated in Production Order

Hi,
I have run KSII , for actual activity price calculation. After this , the revalution of production orders was done.
But I am not finding any entry in Production order with a value of variance between Actual Price and Plan Price of the Activity type.
It sould come in the production order.
What can be the reason?
In OKEQ, for the Version '0' and the fiscal year, Revaluation has the entry ' 1.Own Business Transaction'. I hope this is correct.
But still the revalaution line item is not showing in Production Order.
Please help.
regards
Kamlesh

Hi Paolo,
Yes, MFN1 ran perfectly and I am also able to see the details in the screen.
My concern is, this revaluation should also have affect on Production order, thats what not happening.
Or let me know where can I see the affect of revaluation on Production orders.
regards
Kami

Similar Messages

Activity price not getting updated at Production order

Hi All,
I have made activity dependent planning at cost centre and calculated the activity rate. The activity rate is showing correctly for the cost centre in KP26, but while confirming the production order (CO11N) the the activity price is not getting updated in production order. But material price is getting properly updated at production order.
Plz help me in identifying the possible areas of mistakes.
Regards,
BKD

Hi,
Please check the Period for which you have created the ht activity price is same as the period in the conformation. In the workcenter in which you are confirming please check whether the activities are assigned to the work center.
Bye,
Ramesh

Tax is not getting updated in Sales Order Pricing Conditions

Hi ,
Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
Following are the changes for in the standard Pricing:
1) Created ZPSC condition type to calculate the sur-charge from Z-table
2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
We implemented the logic for updating values of Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
Please suggest how to update the Tax values correctly without manual update.
Thanks ,
Rajesh Sanapala.

Hi Lakshmi,
I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
Thanks
Ivy

Portal Activity Report is not getting updated properly

Hi,
I have created a test portal activity report with the Reporting type set as Page/iView activity. I have added five iViews in this including a yahoo search URL iView. The reporting period interval is set to Fixed Period with the date range that spans for around 10 days.
The issue is, even after hitting these iViews several times, I don't see the portal activity report getting updated. Only for the yahoo search, I can see no. of Users as 1 and no. of Hits as 4 as a previous day report (today being friday, I could see thursday's yahoo iView report).
Here are the pre-liminary settings that I've done:
1. All the iViews have the 'Monitor Hits' as 'true'.
2. The Activate Data Collection is set to 'true' in the 'DataCollectionHook' that is available under com.sap.portal.activitydatacollector Service
3. The properties viz., Activate Portal Activity Report, Gather iView statistics, Page statistics..etc are all set to 'true' in the ActivityReport Service
4. I could see that the last aggregation time (in GMT) keeps changing every one hour without any problem.
Any help would be appreciated.
Thanks in advance!
Regards,
Yuvaraj SG

Hi Raghu,
I tried as per your suggestion. At first, I thought that it's working. But, the report came out only for one day (thursday's report) and there weren't any more reports after that. So, I don't think this approach is working in my case! Moreover, for me the requirement is that the iViews have to be in some other portal roles and the Activity Report iView will be in a different portal role.
So, I am currently checking the SAP Note 1084379 as Sandeep has quoted.
Thanks for your help!
Regards,
Yuvaraj SG
Edited by: yuvaraj s g on Jul 13, 2009 8:09 PM

Sales Order Not Getting Converted to Production order

Hi gurus,
I have a sales order and when on MTO process i try using CO08 to create a production order using with order type ZP02 , sales order no , item no , production plant the production order doesnt gets created . could anyone help me

Hi,
What is the error message you are getting?
Are you using strategy group 20 in material master?
Did you try using other order types?
Regards,
Senthilkumar

Overhead is not getting updated in the production order

Hi all,
I am running actual overhead calculation with KGI2.
But the overheads are not getting updated in the order.
Order contains relevant overhead key also.
What could be the possible causes?
SmanS

Arun/ Suleman,
Thank you for your reply.
I have maintained the % in the costing sheet against the 'Overhead rate' but I didn't get the secondary cost element.
Request you to elaborate it further & explain me how to maintain the same.
Also I will be thankful to you, if you could explain me the exact process of loading the overhead on the order i.e. how it loads the overhead form the cost center to order? What happens to the total cost which was lying on the cost center etc, in details.
Mean while I had maintained the required values in costing sheet in KZS2.
Maintained the % against material overhead rate as well as manufacturing overhead rate.
Maintained the credit values for the overhead rate.
Maintained the calculation base values also.
Now while overhead calculation with KGI2, I am getting two errors as follows,
1. S:K5:162 E02 20090831
2. Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND for object
I can not figure out the reason.
SmanS
Edited by: SAP PP Consultant on Aug 10, 2009 6:47 AM

Stationglobals in a Labview custom step type inside a new thread do not get updated

Hi,
I have a Custom Step type which I use to pass parameters to TestStand from a VI and vice-versa through some step fields. I run the VI inside a sequence in a new thread and expect the VI to update the parameters when I change them through the TestStand StationGlobals.
For example, I have a waveform injection custom step. I want to continuously inject a signal while I do some measurements on it. So, I put this step type in a sequence and ran it in a new thread.
I pass the VI parameter 'Stop_Injection' through a step field as shown in image 1. And I expect the step field to get updated when the new thread is run continuously by passing the corresponding stationglobal in the Pre-expression of the custom step (image 2). But this fails to happen. The VI does not get updated.
On the other hand, if I do not bother with the step field and directly pass the stationglobal (figure 3), it works perfectly.
Any idea why this is happening?
I hope I was clear in my question.
LabVIEW 8.6.1
TestStand 4.1.1
Message Edited by Changi on 08-06-2009 12:50 AM
Attachments:
1.JPG ‏92 KB
2.JPG ‏42 KB
3.JPG ‏91 KB

Hi,
In image 3 you are linked directly to the StationGlobal of which you are continually updating therefore seeing the changes.
In the other you are only linked to the Step.Stop_Injection and are only updating this valve from the stationglobals once in the pre-expression. You are not changing the reference.
Regards
Ray Farmer
Regards
Ray Farmer

Batches not getting updated by incoming idoc DELVRY03 (message type SHPCON)

Hi
    I am using incoming idoc DELVRY03 (message type SHPCON) to update delivery document.I am using field E1EDL24-CHARG to pass batch data.
      However batch number is not getting updated in delivery document. I have verified aspects like batch number is valid etc.
     While updating batch number thru incoming idoc, do I need to supply some other data?
Please help.
TIA
Koustav

Hi Biswas,
I think batches are determined automatically in the deliveries while creation and thats the reason it is not getting the batch number in the delivery, if there is no automatic batch dertermination then it will update the valid batch number
also please check the batch determination procedure and the batch master in MSC2N and availability of materials for that particular batch
regards,
Santsoh

ORDERS Inbound EDI1 Condition type not getting updated

Hi Experts,
As per the client requirement, during ORDERS Inbound process we need to capture the "Customer expected Price" in EDI1 Condition type in the sales order. So we maintained the details in the E1EDP01 in field VPREI.
But during ORDERS Inbound process this EDI1 field is not getting updated. Can anyone please help us on this.
Warm Regards,
VEL

Problem of our ABAP coding distrubed the std functionality. In std SAP, this functionality will work without any issue.

KONV not getting updated with new condition type value

Hi,
I have created a new condition type for a pricing procedure. But table KONV-KAWRT is not getting updated with any value. Can anyone help me this.
Thanks
Shweta

Hi Vasu,
It was created in the same way then I have assigned calculation formula . For invoice it is comming fine but for the intercompany billing it is not showing any value in Contition tab for this particular condition type. For this when I checked in KNOV table it is showing condition type but the value (KONV_KAWART) is comming out zero and due to this reason it is not showing value in intercompany billing ->condition. Do I need to write code for this?
Thanks,
Shweta

Quantity field not getting update in PCA document for Goods Receipt

We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.Mohanty

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

FD33 - Receivable Field in Customer master is not getting updated

FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
In SD, we are having the item category but i am not getting how to control for FI documents? How can i make them credit relevant item. Also for special item, we are controlling the same through Transaction code : OBXY - by special GL indicators but what about the normal/general item?
How can I control the general FI documents having various FI documents type as relevant to credit check?

Apart from the above,please also check the below:
FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
As per me there is no specific control to active the credit active field in FI values unlike for updating the sales values in FD32 we activate credit active for the item cat(VOV7) which will ensure the sales values to update (open order, open delivery and open invoices) in to credit management.
For FI values to update i think this is inbuilt in the program only.( example update group 000012,15,18 etc).
Any way coming into query not updating the receivables, please check the below points once again.
1. Check the whether invoice has accounting document generated or not, make sure that it is generated then only system update the receivables.
2. Even if the above all points are checked including above all posts,then also still the same issue repeating then try to run the program RVKRED77, before this first run RVKRED88 and compare this values with FD32.
thanks,
Srinu.

Moving Average Price does not get updated for Project Stock

Hello Experts
We have an Engineer-to-Order implementation for our client. Accordingly procurement is done per project. Each Project issues its PRs which are then converted to POs and recieved into Project Stock.
While assigning the material to the Network activity in Project (using material component) the system uses the price found in the material master (MAP or STD) as a planned cost appended to the project.
Problem:
while procuring the material, when we receive it into Project Stock (Mvt 101 Q + ) the Moving Average Price in the material master does not get updated. this way all newly created material master will never have a moving average price, thus whenever we try to assign them to the project we receive an error message (Cost for Material Component ###Mat.Num### cannot be determined.
Question:
How can I get the system to update moving average price (for all types of stock) based on procurement for project stock.???
Your help is kindly appreciated.

I'm sorry for the confusion
Case:
The T-code is CJ20N Project Builder in PS module
we are assigning material components to network activities under a certain WBS element in the project.
there is a function in the Project Builder to calculate the cost of a network. it uses the costing variant assigned to the network which is PS02 (We get the error here)
The costing variant has a valuation variant which lists a series of strategies to get the material price. Planned 1 if not then STD if not then MAP. (you can choose between many options via a drop down menu) you can choose 5 consequent options.
The MAP that the valuation variant is coded to get is the Plant Stock MAP -- Or the Project Stock MAP but only Per WBS element.
The MAP that the Actual postings update is the Project Stock MAP only Per WBS element.
This means that if you use a material component to purchase material 123 Acc.As. Q for WBS X for 10 $ then you try to assign a new material component with the same material 123 to WBS Y, the system will not get a MAP. because it's stored in QBEW per WBS element.
This way the system will never get the MAP right.
However, we don't always use project stock to procure for projects, for some requirements we can assign and use plant stock as well for Projects. that way we need the MAP from plant stock.
In the Valuation Variant you can use a User Exit Strategy. The user exit's name is COPCP005
My Suggestion is:
Use the User Exit COPCP005 to calculate the { Total value / the total quantity (MAP) from QBEW + Total value / total quantity (MAP) from MBEW } / 2
which is the MAP for both plant and project stock together, since that we are going to use both.
Q: Is this correct !?

VTP (revision numbers) and one client not getting updates

Hello.
Somewhere along the line one of our switches (3750x) got messed up. Once they were finally configured about 6 months ago we never touched them again.
I noticed yesterday when I created a new vlan it was not getting populated to one of our switches. For some reason I did not notice that the domain name on the switch not receiving updates was not our domain.
So I switched the domain on this switch to the correct domain and it still does not show any updates and also has a revision # of 7.
So on this switch I then unplugged all trunk ports and did "vtp mode transparent". I then switched it back to "vtp mode client vlan".
It still showed revision 7.
So I tried "vtp domain bogus" and "vtp mode transparent" and then did "vtp domain mydomain" and "vtp mode client vlan".
It still showed revision 7.
So I tried "vtp domain bogus" and "vtp mode transparent vlan" and then did "vtp domain mydomain" and "vtp mode client vlan".
It still showed revision 7.
I am at a loss as to how to fix this problem other than rebuilding the switch. I have a vtp server at revision 10 and two other switches also at revision 10 that are getting updates from the vtp server. Only one switch is not. Please note that this one switch that is not working at some point did since it has all the vlans we created on our initial installation.
-- Thanks
// GOOD switch
GOODSWITCH#show vtp status
VTP Version capable             : 1 to 3
VTP version running             : 3
VTP Domain Name                 : mydomain
VTP Pruning Mode                : Disabled
VTP Traps Generation            : Disabled
Device ID                       : 7426.acad.de00
Feature VLAN:
VTP Operating Mode                : Client
Number of existing VLANs          : 15
Number of existing extended VLANs : 6
Maximum VLANs supported locally   : 1005
Configuration Revision            : 10
Primary ID                        : b838.61aa.5880
Primary Description               : lab-desk
MD5 digest                        : 0xB8 0x3E 0x2C 0xB7 0x85 0xB5 0x5D 0xA6
                                    0x4A 0x4E 0xFC 0x5E 0x5A 0xA1 0xAF 0xCC
Feature MST:
VTP Operating Mode                : Transparent
Feature UNKNOWN:
VTP Operating Mode                : Transparent
// BAD switch
BADSWITCH#show vtp status
VTP Version capable             : 1 to 3
VTP version running             : 3
VTP Domain Name                 : mydomain
VTP Pruning Mode                : Disabled
VTP Traps Generation            : Disabled
Device ID                       : 7426.acad.ee80
Feature VLAN:
VTP Operating Mode                : Client
Number of existing VLANs          : 12
Number of existing extended VLANs : 6
Maximum VLANs supported locally   : 1005
Configuration Revision            : 7
Primary ID                        : b000.b4b0.f200
Primary Description               : lab-desk
MD5 digest                        : 0x7A 0x5C 0x2E 0x05 0xF2 0x80 0x6F 0x2F
                                    0x4E 0xE1 0x34 0x07 0x01 0x7F 0xB9 0x2B
Feature MST:
VTP Operating Mode                : Transparent
Feature UNKNOWN:
VTP Operating Mode                : Transparent

Output from the switch NOT getting updates.
// we have three trunk lines
TenGigabitEthernet1/1/1
TenGigabitEthernet1/1/2
TenGigabitEthernet2/1/1
// #show interfaces trunk
Port        Mode             Encapsulation Status        Native vlan
Te1/1/1     on               802.1q         trunking      1
Te1/1/2     on               802.1q         trunking      1
Gi2/0/31    auto             n-802.1q       trunking      1
Gi2/0/46    auto             n-802.1q       trunking      1
Te2/1/1     on               802.1q         trunking      1
Port        Vlans allowed on trunk
Te1/1/1     1-4094
Te1/1/2     1-4094
Gi2/0/31    1-4094
Gi2/0/46    1-4094
Te2/1/1     1-4094
Port        Vlans allowed and active in management domain
Te1/1/1     1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te1/1/2     1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Gi2/0/31    1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Gi2/0/46    1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te2/1/1     1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Port        Vlans in spanning tree forwarding state and not pruned
Te1/1/1     1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te1/1/2     1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Gi2/0/31    6,12,100,125-126,129,1032,1096,1128,1160,1192,1224
Gi2/0/46    1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te2/1/1     none
show spanning-tree interface TenGigabitEthernet1/1/1
Vlan                Role Sts Cost      Prio.Nbr Type
VLAN0001            Root FWD 2         128.53   P2p
VLAN0006            Root FWD 2         128.53   P2p
VLAN0012            Root FWD 2         128.53   P2p
VLAN0100            Root FWD 2         128.53   P2p
VLAN0125            Root FWD 2         128.53   P2p
VLAN0126            Root FWD 2         128.53   P2p
VLAN0127            Root FWD 2         128.53   P2p
VLAN0129            Root FWD 2         128.53   P2p
VLAN1032            Root FWD 2         128.53   P2p
VLAN1096            Root FWD 2         128.53   P2p
VLAN1128            Root FWD 2         128.53   P2p
VLAN1160            Root FWD 2         128.53   P2p
VLAN1192            Root FWD 2         128.53   P2p
VLAN1224            Root FWD 2         128.53   P2p
show spanning-tree interface TenGigabitEthernet1/1/2
Vlan                Role Sts Cost      Prio.Nbr Type
VLAN0001            Desg FWD 2         128.54   P2p
VLAN0006            Desg FWD 2         128.54   P2p
VLAN0012            Desg FWD 2         128.54   P2p
VLAN0100            Desg FWD 2         128.54   P2p
VLAN0125            Desg FWD 2         128.54   P2p
VLAN0126            Desg FWD 2         128.54   P2p
VLAN0127            Desg FWD 2         128.54   P2p
VLAN0129            Desg FWD 2         128.54   P2p
VLAN1032            Desg FWD 2         128.54   P2p
VLAN1096            Desg FWD 2         128.54   P2p
VLAN1128            Desg FWD 2         128.54   P2p
VLAN1160            Desg FWD 2         128.54   P2p
VLAN1192            Desg FWD 2         128.54   P2p
VLAN1224            Desg FWD 2         128.54   P2p
show spanning-tree interface TenGigabitEthernet2/1/1
Vlan                Role Sts Cost      Prio.Nbr Type
VLAN0001            Altn BLK 2         128.109 P2p
VLAN0006            Altn BLK 2         128.109 P2p
VLAN0012            Altn BLK 2         128.109 P2p
VLAN0100            Altn BLK 2         128.109 P2p
VLAN0125            Altn BLK 2         128.109 P2p
VLAN0126            Altn BLK 2         128.109 P2p
VLAN0127            Altn BLK 2         128.109 P2p
VLAN0129            Altn BLK 2         128.109 P2p
VLAN1032            Altn BLK 2         128.109 P2p
VLAN1096            Altn BLK 2         128.109 P2p
VLAN1128            Altn BLK 2         128.109 P2p
VLAN1160            Altn BLK 2         128.109 P2p
VLAN1192            Altn BLK 2         128.109 P2p
VLAN1224            Altn BLK 2         128.109 P2p

544 Movement ,Qty & value is not getting updated in MC.9

Dear friends,
MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting G in OMJJ.
I require the info about MC.9 configuration or any info related to this.

Hi,
Please refer SAP note 581240 for this.
For these stocks you have three valuation types for selection:
' ' = no inventory valuation
'A' valuation = without reference to sales document ('make-to-stock
inventory')
'M' = separate valuation with reference to the sales and distribution
document/project
ONLY stock/stock movements with special stock valuation 'A'
(make-to-stock inventory) are updated in Inventory Controlling.
Thus, if you find a document which is not updated in the info structures
of Inventory Controlling (S031-S039) and you require this, check the
corresponding documents in the materials management tables. You can find
the special stock indicator and indicator of the valuation of the
special stock, for example, in document segment table MSEG in the
following fields:
MSEG-SOBKZ = Special Stock Indicator
MSEG-KZBWS = Indicator: Special Stock Valuation
Only A type (make to stock ) are updated in the info structures.
Hoping this helps.
Regards,
Rajesh.

Revaluation of Activity type is not getting updated in Production Order

Similar Messages

Maybe you are looking for