Revenue can be entered to Billing WBS after TECO status

Dear Friends
The scenario is like Resource related billing via SD order item account assigned to Billing WBS element.
Invoice has been created against sales order item while WBS is having status release.
If I change the status of WBS ? What would be effect of it ? I mean can open invoice can be cleared / new invoice can be created against same TECO status WBs element etc.
Please clerify.
Edited by: Nitin Patoliya on Oct 7, 2008 6:07 PM

go to transaction BS23
enter I0045 in the bottom left corner on the screen and enter
now double click on I0045
you will be able to see what you can and cannot do when TECO

Similar Messages

I can not enter my wifi info after 4.3 upgrade on iPad. It will no bring up keyboard. Proxy is off, but wifi name comes up, just ca not enter the numbers

I upgraded my first gen iPad to IOS 4.3.3. Now, it will recognize my wifi system name, but the ip address, etc info is blank. When I try to touch beside the ip address, or any other line I need to enter my wifi info on, the keyboard will not come up. I did it under "static", and finally got it to not erase all the info when I went back to "dhcp" like my iPhone-4 is set on (it works fine there, so it's not the wifi), and leave "settings, it still won't recognize the info. Then when I go back to check the settings, all the ip and other info numbers are gone again. How do I get it to just accept my regular setup process like when I first did it? I have unlimited 3G access, but need my wifi to work too, obviously.
Thanks for any help! I have set it all up and tried rebooting, and also just turning it off and on, no go!

I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

Production orders can not be processed by finance after TECO

Hi,
For past few months the production orders that are TECOu2019d but cannot be processed by Finance because they get a message that the settlement rule has not been satisfied.
When we look at the production order the settlement rules showing confirmed. To fix this issue, manually we enter settlement rule and delete the previous one.
What can be the problem? whatshould I do to fix this issue permanently.
Jayesh
SAP PP

Hi,
it is sure issue with settlement profile ,u select into order type dependent parameters,
For normal order settlemnt is done against material account, i.e.debit & credit at material consumption account,
for rework order ,settlement is against cost center,
Pl. check what u select into settlement profile.
Regards,
Devendra

Cost booking problem after TECO status was set

Dear All,
Can any one tell me reason why cost is booked to the TECO project, now what i have to do? pl help me to solve the issue.
Regards
Karunakaran

Hi,
I think system behaviour is correct. Although the project is technically complete, it should allow cost posting such as pending invoices before project closure.
If at all you want to block the cost booking then you can very well make use of user statuses and block the business transactions.
Regards

Restricting Goods Movement after TECO in PP

Hi All,
I want to restrict logistical movements after TECO status in Production Order. After searching all the threads in this forum, the best answer so far is to maintain the system status characteristics via t-code BS22.
My question is, does changing TECO behavior via BS22 impact any other modules such as CS or SD? BS22 seems to be the t-code to control all system statuses in SAP.
Please help to shine some light on this matter.
Regards,
Charles

hi
yes it will definetly impact other module, then best way is create an user status of the order as TECO which will forbid the goods movement once this status has been activated.
regards
thyagarajan

I can't enter any values in JTextField after loading the flash files.

Hi to all,
In my application I have two panels. One panel has JTextField and another panel i loaded flash files.
The flash files are build by CS4. I'm using JDIC to load the flash files. While open the application i loaded flash file and I try to enter any input in the textfiled, but I can't. After minimize and maximize the application I can enter the values. This problem happens only after I change the jre version from 1.6 to 1.7.
While loading flash files I'm getting the below exception.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNative(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unknown Source)
pls give me a solution.
Thanks in advance...:)

I can't enter any values in JTextField after loading the flash files., locking.

I can't enter any value in the Text field, after loading flash files

Hi to all,
In my Java application, I'm using a text field and a panel to load flash files. I'm using JDIC 0.9.1 to load the flash files in the panel. The flash files are created by Flash CS4.
While running the application, I can't enter any value in the Text field, after minimize and maximize the application I can enter the values.
This problem happens after change the jre version from 1.6 to 1.7.
I'm getting the following exception while running the application.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNati ve(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unkn own Source)
pls give me a solution.
Thanks in advance...:)

I can't enter any values in JTextField after loading the flash files., locking.

How can I enter actual percentage of completion in the WBS elements?

Hi all !
I Can not enter Actual percentage of completion in WBS elements...!
I have followed these steps in Progress analysis:
1.- In the progress tab of WBS elements I have entered Measurement method ESTIMATION for
progress analysis (Plan&Actual).
2.- In the WBS element I have estimated PLAN percentage of completion 100% in period 8
3.- In the progress tab of network activities, I used ESTIMATION method for Plan and WORK for actual
to calculate the percentage of completion.
4.- I have entered final network confirmations
Actual Start date: 08.11.2014
Actual Finish date: 08.15.2014
Remaining work is cero.
5.- I run Project analysis to display measurement methods with transaction CNE1
and Progress analysis with transaction CNSE5
In Progress analysis the Processing % of work in Network activities is 100% but 0% in the WBS
element
Adj.NAgg.Act. POC (Adjusted non-aggregated actual percentage of completion)is 100% in network activities
POC actual, non-agg.(Non-aggregated actual percentage of completion)is 100% in network activities.
Does SAP calculates actual POC?
Should I manually enter Actual percentage of completion in the WBS elements?
I can not enter percent of completion (actual value) for WBS elements. The field is non editable !
Please help !

Hi Rafael,
I am facing the same problem.
I am using Plan method at activity : Time Proportional
Actual method at activity : Work completion
At wbs level Plan and actual is Time proportional.
I am not identified how the "Adjusted non-aggregated actual percentage of completion" and
"Non-aggregated actual percentage of completion" is calculated.
Please help me for the same.
Regards,
Pradeep

Ipad2, I can not sign in to imessage after turning it off and doing a hard reboot. Upon entering my info it states no network connection, but I can use it o surf in Safari and iter websites. Any suggestions. Went on with Apple, they think its my network.

Ipad2, I can not sign in to imessage after turning it off and doing a hard reboot. Upon entering my info it states no network connection, but I can use it o surf in Safari and iter websites. Any suggestions. Went on with Apple, they think its my network. All other wireless equipment can ign on without problems. This happened after I turned imessage off.

Step by step, how did you arrive at seeing this agreement?

Can't enter password after 0s7 upgrade .

Before 0s7 upgrade, ipad password included Greek characters. Now start up keyboard screen has no 'world' button to access Greek characters so cannot enter password to start ipad. Any suggestions on how to restore/ find in settings? Thanks

I have the same problem, but as nobody else has replied to your post I am assuming that it is not very common. For me, it has only just started and after a bit of investigation I have found that this problem only arises when running my Powerbook G4 on mains power without the battery installed. Once the battery is fitted (still running on mains power) I can then enter the password as usual. I had been running the G4 without the battery since the latest battery recall.
When the problem arose I find that by clicking the mouse within the User Name field (at the end of my name) and then pressing the tab key, to move the cursor into the password field, allowed the password to be entered. Sometimes I had to do this several times before the key presses were accepted and the password could be entered.
Powerbook G4 Mac OS X (10.4.7)

Can't enter password after sleep

When I put my powerbook to sleep by closing the lid while playing a game (eg Civ 3) and then wake it (open the lid/ press space) I can't enter a password in the password field as it doesn't accept any key presses (even after clicking on the field). I was going to telnet in but the machine goes back to sleep too quickly. Is this a known issue with a workaround (I don't want to turn off the password as I take it on the train and I have bank details on it).
Thanks in advance for any help.
Arron

I have the same problem, but as nobody else has replied to your post I am assuming that it is not very common. For me, it has only just started and after a bit of investigation I have found that this problem only arises when running my Powerbook G4 on mains power without the battery installed. Once the battery is fitted (still running on mains power) I can then enter the password as usual. I had been running the G4 without the battery since the latest battery recall.
When the problem arose I find that by clicking the mouse within the User Name field (at the end of my name) and then pressing the tab key, to move the cursor into the password field, allowed the password to be entered. Sometimes I had to do this several times before the key presses were accepted and the password could be entered.
Powerbook G4 Mac OS X (10.4.7)

HT2534 I was previously using itune gift cards to purchase music. Now, it requering to enter billing information and i don't want to have a credit card on the sytem. How can I bypass this billing/credit card requirement?

I was previously using itune gift cards to purchase music. Now, it requering to enter billing information and i don't want to have a credit card on the sytem. How can I bypass this billing/credit card requirement?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HT201412 i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.

i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.

Okay. You are not entering the correct passcode. If you forgot or it is not taking your passcode then you will have to restore.
See http://support.apple.com/kb/HT4113

GE70 2PC - can't enter bios after EC flash

So I've flashed my GE70 2PC with 1.506 firmware provided by MSI. Everything went smooth - it flashed without any errors and the laptop still runs.
However, I can't enter bios anymore. When the laptop boots I'm pressing DEL and it stops on a black screen with an underscore ("_").
I did the EC reset, I even left my laptop without any power supply (no batter and no DC) for the whole night and nothing.
I've contacted MSI and they sent me EC flashes from 1.500 to 1.5007 (without 1.5002). I've tried them all and nothing. Still can't enter bios, however, after rest the laptop boots Win 8.1 normally.
Any ideas/clues how to fix it?

No, I didn't update BIOS prior to EC flash. I also don't remember BIOS version.
However, it seems to be a common issue and MIS has a fix as I get this message from them:
Quote
Can't enter BIOS fix
« Sent to: DawidMisiak on: 13-November-14, 06:57:35 »
Remove this messageRemove
Dear DawidMisiak,
For the can't enter BIOS problem you mentioned in the forum, please update the latest BIOS version E1759IMS.620 in Windows.
Steps:
1. Download the file.
http://ftp://ftp2.msi.com/Temp/E1759IMS.620.zip
id: *********
PW:*********
2. Extract the file.
3. Run the "FLASHWIN64" under windows.
Let us know if you have any question during the update, thank you.
MSI support
Unfortunately, the link doesn't work anymore and I can't download the file.
Does anybody have an access to this file or MSI can you send me a valid link?

IOS7 - After taking a photo the lock screen zooms in and I can not enter my password. Does anyone know why?

Everytime I take a photo on my phone either when it is locked or not, when I come back to my phone to use it next the lock screen has zoomed in and I can not enter my password. I have to either switch the phone off or keep playing with the side button. Its only happened since iOS7 has been installed. Can anyone help?

On the Home screen, double-tap with three fingers to exit zoom.
Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
http://support.apple.com/kb/ts3129

Revenue can be entered to Billing WBS after TECO status

Similar Messages

Maybe you are looking for