Reverse the sort output for autofeed copying??

is there a way to "reverse" the output for copying when using the autofeed tray? i sometimes copy 20+ page documents and every time i do this i get the first page face up and then the second page comes out face up and then the third so that i have to sort them so they are in order which is a pain. i am putting the paper in the autofeed face up since i don't think i will get any results if i put one sided paper face down in the tray (the copies will just be blank i think).
i know this sounds totally silly but i spent a lot of time resorting and for some reason it seems like it shouldn't take a NASA mission to let me get these printed out in order.
is this just a function of any bulk copying and i just can't get my brain to realize this or is there some sort of super bad autofeed order switch i can flip?
TIA

Reading your post it sounds like a limitation of the printer you are using. For a lot of printers with a document feeder, when you copy a stack of pages, the printer will print them face down so that they are in order. With your printer outputting the copies face up, you would have to load them in reverse order in the document feeder if there is no means via the printer control panel to print face-down.

Similar Messages

  • Unable to find the published output for this request - problem

    Hi ,
    In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
    The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
    Unable to find the published output for this request.
    No output file exist for the request
    and if i see the log file i get this message :
    Arguments
    P_INVOICE_ID='10243'
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    +/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
    XENVIRONMENT is set to  /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    AMERICAN_ALBANIA.UTF8
    +' '+
    REP-3000: Internal error starting Oracle Toolkit.
    Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
    +(c) Copyright 1999 Oracle Corporation. All rights reserved.+
    The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
    And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
    Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
    PS: i am using ebs 11.5 version
    Thanks in advance,
    Best regards

    Hi,
    REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
    Regards,
    Hussein

  • What is the AC output for the orgnal charger for Camelio x100?

    hi,
    I lost my ac adapter for my Camelio X100 camera. I want to know the AC output for the orignal adapter because I need to buy a new one.
    Please if you have same camera model (Camelio X100) just take a look for PC adapter and tell me how much ouptu volt and output Amp ?
    Best Regards

    You should archive the material in it's native format so that you have the possibility to revisit the project and make changes or generate master files in other formats.
    Use the Media Manager to consolidate your project into a single enclosing folder. This can be compressed into a .zip file or disk image. It will save space if you dont include render files, even more if you make the material that came from tape, offline -although you will have to recapture in that case.

  • Getting error "Unable to find the published output for this request"

    1. Created a Data Template
    2. Created a Data Definition using the above Data Template
    3. Created a RTF template and registered the same in XML Publisher Administrator
    4. Created Concurrent program for the data template using 'XDODTEXE' as executable
    5. Ran the above concurrent program and it completed successfully.
    6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
    7. I can see the XML output in the $APPLCSF/out directory.
    8. Also the short name for concurrent program and data definition code and template code are same.
    I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
    Am I missing something here. Can anyone come across this issue.
    I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
    Thanks

    I tried again after applying XDO 5.6.2. I am still not able to see the output.
    Here is the logfile info. There is no mention of OPP or PUBLISH section:
    XDO Data Engine ver 1.0
    Resp: 21540
    Org ID : 101
    Request ID: 348042
    All Parameters: p_batch_id=7169
    Data Template Code: AUDRPT
    Data Template Application Short Name: XXCUST
    Debug Flag: Y
    {p_batch_id=7169}
    Calling XDO Data Engine...
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 348042
    Number of copies : 0
    Printer : noprint
    Finished executing request completion options.

  • Where can i find the serial no for my copy of LR 5.7?

    i need to find the serial no for my copy of lr 5.7 to activate my copy of LR 6. Where should i look. The serial no in my system info has the last 4 digits x out.

    If you did register it back then, open your Adobe account with your Adobe ID and you will find it there: Find your serial number quickly
    If you still have it installed, look here:
    C:\ProgramData\Adobe\Lightroom\Lightroom xy Registration.lrreg
    If you install LR6 on the same machine it should automatically find LR5 and it's serial.

  • Reverse the scroll direction for my track pad

    i just updated to mavericks and i can't figure out how to reverse the scroll direction for my track pad

    ? Are you saying that the option isn't there? Mine is in the "Mouse" section.
    See this:

  • How to modify the sort criteria for a Metadata Search

    I am migrating from Stellent 7.1 to UCM 10gR3 and have found a difference in the sorting of the output from a search of data/metadata copied from the old version. For the search, I have selected a specific Account with Results Per Page = 2000, Sort By = Title and Ascending set on both the 7.1 and the 10gR3 instances. In the 7.1 instance, the results are sorted by number, then A-Z with no emphasis on case. For the search on the 10gR3 instance, the results are sorted by leading spaces, numbers, capital letters (case), then A-Z.
    Example:
    7.1 Search Results:
    4-up Template
    Active Directory Plan
    ASGV Document
    List of Tools (ignores the space at beginning)
    Zforms
    10gR3 Search Results:
    List of Tools (sees the space at beginning)
    4-up Template
    ASGV Document (lists this before "Active" because it is in all caps)
    Active Directory Plan
    Zforms
    Is there a setting that will allow me to change the 10gR3 instance to match the 7.1 instance?
    Thanks.

    Hi,
    Did you try with <af:resetActionListener> or refresh table in Bean using button make sure partialSubmit true for Button and use following code
    acesContext adfFacesContext = AdfFacesContext.getCurrentInstance();
    adfFacesContext.addPartialTargets(UIForTable);Check following
    http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_resetActionListener.html
    http://www.adftips.com/2010/10/adf-ui-resetting-or-clearing-form.html

  • ADF FACES: how to preserve the sort criteria for an af:table

    How can I preserve the sort criteria on an af:table across page invocations? I've searched all through the forum and I don't see anything on this topic.
    I simply want the sort criteria (from when the user clicks on a column header) to be remembered across multiple uses of the page. I know that the control handles this itself for multiple invocations of the same page (like when you page through the table). But I need to preserve the sort order so I can install it again when someone leaves the page and then returns to it.
    I've tried various attempts using a SortListener to record the sort criteria, but I can't figure out how to reinstall the criteria without generating exceptions from the table control.
    Any pointers on how to do this would be greatly appreciated.
    Thanks.
    Larry.

    Ok, I've solved the problems with the odd behavior by always creating a new model when the table data changes and copying the sort criteria into the new model, like this:
            // Construct our own CollectionModel from this result set
            if(_model == null) {
                // Construct the initial data model and set the starting sort criteria
                ListDataModel m = new ListDataModel(results);
                _model = new SortableModel(m);
                // Set the sort criteria to last name
                ArrayList criteria = new ArrayList();
                criteria.add(new SortCriterion("lastName", true));
                _model.setSortCriteria(criteria);
            } else {
                // Construct a new model so the table "sees" the change
                ListDataModel m = new ListDataModel(results);
                SortableModel sm = new SortableModel(m);
                sm.setSortCriteria(_model.getSortCriteria());
                _model = sm;
            }But, I end up with one final thing that doesn't work. In the "then" clause above, I try to set the initial sort criteria for the table - it has no effect. When the table is rendered, it is not sorted in any way.
    How can I specify an initial sort order for the table? Why is it ignoring the sort criteria on the model?
    Thanks.

  • How to reverse the posted depreciation for a particular period..?

    Hi Experts,
    Please solve my problem, that my client users are changed the depreciation key in last month as per legal requirement. While changing the depreciation key they select the wrong depreciation key and run the depreciation in AFAB. But after running the depreciation they came to know that amount is wrong because of the wrong depreciation key. So now they want reverse the entry for last month only and post the new entry with changed depreciation key.
    Please give me advise how to reverse depreciation for only Last month. That should effect the all previous posting.
    Regards
    Narendra

    Hi,
    Depreciation Posted of only of the Previous Fiscal years
    can be reversed using ABZU Write-Up.
    ABZU -->Reverse the Past
    Dep. For current depreciation reversal you have no alternative except reversing
    co code depreciation document posted using OAGL and then repost it.
    Regards

  • Customize Output of the PO Output for Communication program R12

    I have a requirement to change the output of the seeded PO Output for Communication program, so that it uses a custom RTF template to produce the documents.
    To do this, I have registered this template in XML Publisher under the Purchasing application. I then navigated to Purchasing Super User > Setup > Purchasing > Document Types, and from the window opened, selected to update the Purchase Order Standard Type. From here, I updated the document name and the document type layout as my new custom template.
    However, once I run the program, it completes with an error. The log file is pages and pages (that I won’t post here unless requested as necessary) but at the bottom is section produced that I think may be useful:
    Updated PRINT_COUNT 1
    doc Identifier: PO
    Document ID:14004
    Revision Num0
    Document SubTypeSTANDARD
    Document TypePO
    GenerateDocument::2nd Constructor()
    setFileName- m_documentType:PO, m_documentId:14004
    setFileName- m_fileName:PO_84_700000049_0_US.pdf
    GenerateDocument::Finished 3rd Constructor()
    Setting PO template Code
    Setting OKC template Code
    Before calling genDocTue Jan 22 17:02:01 GMT 2013
    Changed GenerateDocument::Inside the gendoc method
    Calling the getDocument method
    GenerateDocument::getDocument()- Set the Org Context
    GenerateDocument::getDocument()
    GenerateDocument::getDocument() - Searching in the repository
    After Calling the getDocument method
    Calling the getPOXsl method
    Before setting the bind variables for the default layout in getPOXSL()
    Document Template Code :NCC_STD_PO_RTF
    Language Code :US
    Document XSL Contents Tue Jan 22 17:02:01 GMT 2013
    Retrieved the Document XSL Tue Jan 22 17:02:01 GMT 2013
    Calling the getPOXml method
    GenerateDocument::getPOXml() : l_exists 1
    GenerateDocument::getPOXml() : m_whichTables MAIN
    GenerateDocument::getPOXml()- Calling the POXMLGEN method Tue Jan 22 17:02:01 GMT 2013
    Generated the Document XML Tue Jan 22 17:02:01 GMT 2013
    Document XML Contents Tue Jan 22 17:02:01 GMT 2013
    Calling the print util method:Tue Jan 22 17:02:01 GMT 2013
    Passing Params to getBlobPDF :Tue Jan 22 17:02:01 GMT 2013
    m_AppNames :PO
    m_TemplateCodes :NCC_STD_PO_RTF
    m_Languages :en
    m_Territories :US
    genDoc() : Exceptionjava.lang.Exception: Error while generating PDF :null
    java.lang.Exception: Error while generating PDF :null
    rolling back the complete program
    As you can see it's definitely picking up my custom template (NCC_STD_PO_RTF), and it appears to error when tryign to generate it as PDF.
    I have attempted to attach the seeded xsl template to my template definition - to test if the error is due to the program expecting a certain template format - but, as the seeded template is in that particular format, and my definition is expecting rdf, it will not let me.
    I am wondering if anyone has a solution for this requirement. We would like to keep the business process the same as it was in 11i, by using the seeded program, but with a custom template. But I understand that in R12, creating a custom program replicated from the seeded may be the only viable solution.
    This is on Oracle Applications version 12.1.3.
    Any suggestions would be much appreciated, and if you think that any more information is required, let me know.
    Thanks.

    Publisher version is 10.1.3.4.2.
    It seemed to be a data issue. When a certain test PO with a insufficient amount of data in the XML output was put through the template, and hit these clauses, it failed, and the concurrent program errored.

  • How do I change the Sort order for Music Video's on the iPad

    Hi All,
    Apologies if this has been dealt with elsewhere - I can find posts about sort order for TV Shows and Movies but not Music Video's.
    When I sync my music video's the appear in Track order in the video app and I cannot find how to change the sort order to 'by Artist' (or any other order come to that).
    Any ideas please>

    Hi!
    Im afraid I believe this cannot be done yet. Sorry!
    You can try submitting feedback to apple by clicking [here|http://www.apple.com/feedback/ipad.html] if you wish.
    Hope this helps!

  • Controlling the sort order for a column?

    I have a column which uses strings that I want to sort on. But, I don't want to do simple string sorting. Can I effect the sort order somehow? Maybe enumerate the values and assign integers to them?
    For example, I want to use Low, Medium, and High. Or maybe: L-, L, L+, M-, M, M+, H-, H, H+
    Any pointers on how to do this?

    Todd,
    Not knowing what you're trying to sort, it is difficult to make specific suggestions. Basically, two approaches come to mind. 1) start the lines of the column you want to sort with some type of sort code or 2) place that sort code in another column and sort on two columns - possible hiding the one with the codes.
    The next problem is designing a code that fits your situation. In the example you gave something like 1L-,2L,3L,...,8H,9H may work because there are only 9 categories. If more than 9, two digit numbers may work but remember to use leading zeros to pad single digit numbers.
    The code could also be alpha characters with relevance such as "Auto", "Clot", "Food", "Hous", "Misc", etc. But again, if these alphabetic categories are not in the order you like you may have to precede them with some sequence device to get what you want. Maybe something like "aFood", "bClot", "cHous", etc. would work. Designing a code applicable to a given situation that one can easily remember is not always easy.
    Hope this gives to something to think about and if you care to give more details you'll surely get some specific suggestions.
    pw

  • What is the best output for archiving in Quicktime?

    Hi,
    I'm producing webvideo. The video's are converted to quicktime and dropped on a videoserver and converted to flash.
    The most important footage is archived to tape but I'd like to archive all the output. What is in your opinions the best setting for output in quicktime with less space and enough quality to use again in webvideo. Final use will be 800kb flash video.

    You should archive the material in it's native format so that you have the possibility to revisit the project and make changes or generate master files in other formats.
    Use the Media Manager to consolidate your project into a single enclosing folder. This can be compressed into a .zip file or disk image. It will save space if you dont include render files, even more if you make the material that came from tape, offline -although you will have to recapture in that case.

  • WHere Do I view the console Output for SAPJ2EE Server

    In which file do  i see the  console logs for SAP j2EE 6.4
    for eg in my servlet i write System.out.println("ABCD");
    where do  i see this output.

    Hi Nilesh,
    have a look at this thread:
    Regards André

  • The Sort order for a playlist created on my MB Pro is wrong on my iPad. Can I fix this?

    When I create a playlist on my MB Pro I cannot guarantee that the playlist will be in the same sort order on my iPad. It is on my MB Air, but not on my iPad. Does anyone know why? How can I correct this?
    This is important with classical music where the order of the tracks may be critical.
    Thanks in advance
    ed

    Try deselecting Sync Music under the Music tab for your iPhone sync preferences with iTunes followed by a sync which should remove all music from your iPhone. Follow this by reselecting Sync Music and your selections below followed by another sync to re-transfer the music.

Maybe you are looking for

  • Running a function in a Cursor

    hi. i have an interesting question. i have a cursor that works properly. Such as : OPEN p_cursor FOR 'select name,surname,age,height,weight .... ' it works properly. My question is, i want to add a pl sql function as a column. My cursor must be : OPE

  • For query experts

    Hi All Here we have a new requirement from the customer asking us to create a new query. Now the problem is I have to include the 4 views on the application tool bar, it is similar to that we create 4 buttons on the application tool bar and manage wi

  • Autonumber for several fixed rows

    I have often used the autonumber for dynamic row instances with no problem, but now have a problem where my table starts with 3 rows with different content, and the user needs to be able to add and delete rows, at the same time maintaining the autonu

  • Auto-populate fields

    When I press the tab key on my keyboard while I am filling out fields in a Safari web page, the name, address, etc. fields automatically populate with my personal information. I have recently moved and the fields contain my old address, etc. How (Whe

  • Cascaded routers as one mega-wifi--network?

    Hi, Right now, I have 3 Cisco/linksys routers linked together in my house. 1) Master (connected to modem)WRT160Nv3 2) WRT54G2 3) WRT54G As of now, I have them cascaded properly, and they each have their own wi-fi name. You can acces the internet from