Reversing back from Maps 3.0 to 2.0 make you loose...

As in subject I reverted back from Maps 3.0 to Maps 2.0 as the last version didn't satisfied me.
Previously I activated 90 days' trial license with Nokia Maps 2.0 on my N97... And checking licenses would pop out an "xx days Walk & Drive Europe" license counting back from 89 to 0 days passing by....
When I upgraded to Maps 3.0 everything worked fine and the license was "adapted" automatically at first refresh...
After some days of use I decided to revert back to Map 2.0; so I *#7370#ed the phone... but...
When I started up againg Maps 2.0 (that seemed to work correctly) when I updated license associated to my phone the pop up was different: no more "walk" but only "83 days DRIVE EUROPE"
I think that upgrading to 3.0 then reversing back to 2.0 had messed up my 90 days walk and drive trial license...
Anybody knows how restore my license as to use it as "walk and drive europe" for those remaining days???
Thanks
Ambrogio Calcaterra
Milano - Italy
Message Edited by sexinxs on 17-Jul-2009 10:20 PM

Anybody who can provide feedback or a solution??
Thanks
Ambrogio

Similar Messages

  • Hi, I would like to synchronize the calendar's items of my iPad Mini with my MacBook Pro. At today I can only do the reverse operation (from MacBook Pro to iPad Mini). Can you help me maybe with a little tutorial or something? Many Thanks.

    Hi, I would like to synchronize the calendar's items of my iPad Mini with my MacBook Pro. At today I can only do the reverse operation (from MacBook Pro to iPad Mini). Can you help me maybe with a little tutorial or something? Many Thanks.

    Hello there Tonynos.
    The following Knowledge Base article should help with guiding you on how to synchronize information from your iOS device to your computer:
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Thanks for reaching Apple Support Communities.
    Cheers,
    Pedro D.

  • I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) and now my microphone is not working

    I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) 3 days ago, I had a terrible experience as the genious who gave me my solid state disk for safekeeping lost my disk's brackets thus I had to wait 2 more hours until they find one after 10 days of waiting for the repair. I noticed some weird sounds, like somehting is moving with the mac 1-2 times, even if I have no mechanical parts other than the fans, but my real issue at the moment is that my microphone is not working. I can see the mic in the System Info however and in Audio Midi Setup. In the Audio Midi Setup I see that the master chanel is turned off and I can't turn in on. Ch 1 and 2 are on full. I also noticed the first seconds after the comp. boots the blue bar goes to the middle in the System Preferences -> Sound -> Input. Any ideas what to do or try? I do not want to go back to the apple store as it is 50 minutes away from here and I need my laptop as a computer science student. Everything else is working perfectly.

    You need to call both the store that did the repair and Apple directly, warranty service or Apple care, and report this problem with both of them and get a ticket number of some kind (some kind of verification number) that the unit just came back from major service with this problem and that you want it fixed when you can lose the use of it, which is not right now.
    Without doing something like that they could easily say it is damage not covered under the normal warranty.
    God knows what the repair center did and did not do to it while it was there.
    And depending on when you actually bought it the warranty could run out in the mean time.

  • I am missing the foward and back up arrow bottom a top left corner can you please help me to retreve it thanks

    i was trying to download some toolbar option and when i came back to my home page the 2 arrows on the top left side of the page were missing and i tryed to replace them but i am not able to fine the to replace them One more question how do i remove the BEAR SEARCH it has some kine of site and the posted me as 27 im 47 the also posted some of my information and men ask to be my friend and i need to remove it. It makes me very nervis i am not sure what this is i ask them to remove it but they wont PLEASE HELP

    See:
    * http://www.ehow.com/how_6609141_remove-bearshare-spyware.html
    * http://www.fanhow.com/answers/question-77222-how-to-delete-bearshare-search-from-firefox
    You can look for a "Mediabar" program under "Control Panel > Programs and features"
    See also this forum thread about BearShare:
    *[[/questions/792580]]
    If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    *Open the Customize window via "View > Toolbars > Customize"
    *Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    *If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
    *http://kb.mozillazine.org/Toolbar_customization
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • HT201269 I have had my laptop stolen with my itunes account on it with all my music/ films/ apps etc. Can I reverse back up my new laptop with itunes installed from my multiple apple devces?

    I have had my laptop stolen with my itunes account on it with all of my music/ films/ apps etc. Can I reverse back up my new laptop loaded with itunes installed from my ipad and iphone apple devices?

    Follow the directions here:
    https://discussions.apple.com/docs/DOC-3141

  • HT4623 my phone was updated and  a google street view map was lost. How can i restore back from ios 6 to ios 5?

    my phone was updated and  a google street view map was lost. How can i restore back from ios 6 to ios 5?

    You cannot downgrade the iOS, there is no supported method.
    Google streetview was not lost, Google Maps were removed from iOS6 and replaced with Apple Maps.

  • Defining  a 1:1 mapping back from the target to source

    Is it always required to define a 1:1 mapping back from the target to source
    object in a 1:M mapping?
    Can I not just define one to may mapping in source mapping?
    Thanks.

    You can map a 1:M without the returning 1:1. The issue is that you now have made it your application model's responsibility to manage the FK relationship instead of leveraging TopLink.
    The FAQ addresses this here.
    Doug

  • Is there a way to move mp3s back from the iPod?

    I can transfer to my ipod fine, however I had removed a good deal of my music from my PC hard drive as I had it on my ipod. Is there an easy way to move select music back from my ipod to my PC hard drive?

    I made a noob mistake and created at topic for something there was already a topic for. However I wanted to clarify what I am trying to do. I realize that my ipod is mapped to a drive with windows, however the ipod changes the names and seemingly randomly places the songs within its directory structure. I would like a way to move mp3s back without the hassle of manipulating this system.

  • Reverse Proxy from Apache to portal to 2 different ITS Systems

    We're using Apache 2 webserver and we've enabled reverse proxy from our proxy server to our Enterprise Portal 7.0.  We have transaction iviews for different systems, an ECC 6.0 and CRM 5.0.  We are using the integrated ITS for these systems provided with basis version 7.0.  We have all the necessary ports open in the firewall.  I know how to configure the proxy when there's only one ITS server, but how would I do it for two (the ECC and CRM system)?

    We have integrated ITS.  I am not sure I understand where you are going with globalr.srvc file.  We have two systems that we want to hit from the portal via reverse proxy.  One is the ECC system and the other CRM 5.0.  In our portal we use the integrated ITS for each system:
    ECC sytem:
    http://ecc.system.com:8001/sap/bc/gui/its/sap/webgui
    CRM sytem:
    http://crm.system.com:8001/sap/bc/gui/its/sap/webgui
    The issue is how would I map to both ITS from the Apache reverse proxy

  • ReadAllQuery using named EJBQL from Mapping Workbench

    Hi,
    how to use named EJBQL queries defined in Mapping Workbench in code.
    ReadObject queries can be done using:
    MyObject o = (MyObject)getUnitOfWork().executeQuery("findById", MyObject.class, id);
    But I need to a Collection back. So how do I have to do this???
    Andy

    If you want a collection back you must define the query as a ReadAllQuery in the Mapping Workbench.
    then your code will be,
    List objects = (List)getUnitOfWork().executeQuery("findById", MyObject.class, id);
    However you will probably use something other than id for the query, as the id will normally only return a single object.
    If you just want a colleciton back from the ReadObject then just create and add the object to the collection.

  • BE (Bill of Exchange) purchased back from bank before due date

    I have posted BE through either FBW1+ FBW2 or through F-36. Due date is 1 mth in the future. Then i have discounted it through F-33 using bank clearing liab account (credited here and Post automatically only) Settings in OBYK have also been done for Collection, discounting and forfeiture.
    If the BE is purchased back from the bank before the due date, I am not permitted to reverse the BE liab in F-20 as it says that due date is not reached. This is a common scenario with our client and I need to be able to make this work in SAP.
    Please offer me any solution
    thanks

    Never mind, I just had to update the Paying company code, fields Bill of exchange due date... > Earliest-lates due date in...days.
    Regards.

  • In AE CS6 I have 2 3D text layers swapping poition as the camera pulls back from them.

    In AE CS6 I have 2 3D text layers swapping poition as the camera pulls back from them. One layer has a blur added and if I switch off the fx then they stay in the correct order.
    The whole comp consists of 25 tiles (2500x2500px) laid out in 3D as a surface, it is a large map, and the text, which are place names, are at 90 degrees to it. I have placed nulls on the surface to to anchor lights and text to the correct points on the map.
    I wanted a drop shadow behind the text to aid legibility against the background but since using a layer style breaks the render order in 3D space I have duplicated the text, made the front layer white and the back layer black and added a fast blur to the back layer.
    There are expresions to fix the position of the text layers to a null, another expression that rotates both layers linked to rotation of the null that the camera orbits around and also a scale expression that links the scale of the text to the distance from the camera, so the text stays the same size in the frame no matter how far or close the camera moves. In the comp the text layers are next to each other, the white is the index number above the black.
    This has all worked fine. The camera, pulls back, rotates around and the text faces the camera and stays a constant size in the frame. Then I was asked to tweak the move. Suddenly the two text layers swapped round, the black shadow layer obscuring the white text when the camera is in close. As the camera pulls back they go back to their proper positions. However if I turn off the fast blur then they both do what they ought too, white renders ontop of the black no matter what the distance.
    Does anyone have a clue as to why?

    It's not just a preview issue though, as it also renders out. So there's something going on.
    My fall back was going to be to switch to 2D text and use an expression to link it's 2D comp position to the null in 3D world space.
    Totally forgot about the Drop Shadow effect, I've been using layer styles for so long now, as there's more control control over the look, but Drop Shadow appears to be working.
    Many thanks for that. A big help!

  • How do I remove locations and/or pins from maps on iphone 5

    How can I remove locations and/or pins from MAPS?

    A purple pin is a dropped pin. You access that from the "back" of the map, but touching the lower right corner of the map. It is a pin that is dropped in the center of the map you happen to be looking at at the time. If there is no description of the pin, touch the pin and it should show a label, and on the right side of the label there is a blue arrowhead. Touch that and it will provide an address/description of the pin's location and there should be other options, such as directions to here, from here, etc., and then one to remove the pin. Touch that and it should disappear.

  • Trying to remove red pin from Maps, there is no button to remove it, folks . . .

    Have had my iphone 4 for eight months. Updated to iOS 5 recently. Didn't have this problem before but I am UNABLE to remove the red pin from Maps.
    Turned my phone off completely, and it seemed to remove the red pin on turning it back on. But this is not a convenient maneuver.  I was able to drop a purple pin and remove it. But once a red pin is down, THERE IS NOTHING THERE TO REMOVE IT. I'm certain that there is a bug here that needs to be fixed.
    Option 1 under  "Directions", tap on the red pin, tap on the blue arrowhead, tap "remove pin" - - - but there is no such button to "remove pin".
    Option 2, under "Directions", tap on "edit", I thought there used to be a blue "clear" button to remove everything, but there is none.
    Instead under "Directions", tap "edit", tap the grey circle with a "x" inside to remove the address, but it does not make it go away, and the red pin always comes back. The blue cancel button on upper left hand corner also does not remove the red pin.
    Please help. I already read multiple postings on this. I have not found the correct answer for my question. Thx.

    There's no way to remove it.  Either ignore it or update. 

  • Not getting a reply back from a BAPI call

    Hi all;
    I am trying to call a BAPI from xMII which has its input parameter as  from and to dates.I passed in the dates in format DDMMYYYY but am unable to get a reply back from BAPI.
    Same thing is working when i execute the BAPI with the same parameter in R/3 system.
    Please help.
    Mudit

    Mudit
    Did u hv defined Transaction Input parameter with Data Type DateTime which is used to be passed to BAPI request item.
    Pls do check the LastErrorMessage using Tracer (see the tracer logs after hitting F5/F6)
    IlluminatorDocument(With one string param defined)
    SAPJCOInterface(With BAPI call and input param passed in date format)
    <b>Tracer (LastErrorMessage mapped to the mesage) </b>
    IlluminatorRow(Reply from bapi mapped to output param)
    Assignment
    One thing more, y r u not using Repeater action which is used to loop the response from BAPI call and within the loop, use Row action to append the response item the XML Document defined in the first sequence. (Hope, u remember my that guided doc in some prvious thread posted to u where full guide with steps are provided)
    Regards
    Som

Maybe you are looking for