Rewrite process and remove the call to f-54 and replace with bapi proces

Hi Gurus,
Please help me to find the soultion.
The root cause of this continual problem is the design and use of BDC session for F-54. Is there a redesign possible with ECC6.0?
I wanted to rewrite the process and remove the call to f-54 and replace with bapi process.
if this is now possible in ECC 6.0
The benefit would be to better control what PO was used in the DP recoupment.
Thanking you,
Raju Singhireddy.

Hi Balaji,
Check this BAPI
BAPI_QUOTATION_CREATEFROMDATA
BAPI_QUOTATION_CREATEFROMDATA2
BAPI_CUSTOMERQUOTATION_CHANGE
Regards
Arun

Similar Messages

My new iPhone 4S has hearing problem.speaker and headphone works very good.However using handset to make and receive calls I cannot hear anything?I did restore the phone and removed the plastic.Is there any solution to this problem please?

I am having heraing problem with iPhone 4S.Speaker and headphone works well.No echo.When I use handset to receive or make calls,I can't hear anything?I restore the phone and removed the plastic as well.Is there anyway to fix this problem?

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

How do I find bad music files? I have thousands of files, but some are bad. When I try to load them into iTunes, it just spins. I need a routine to identify and remove the bad files. Any ideas?

How do I find bad music files? I have thousands of files, but some are bad. When I try to load them into iTunes, it just spins. I need a routine to identify and remove the bad files. Any ideas?

Hi ajoddo20,
Welcome to the Apple Support Communities!
You can use Home Sharing to import music and other media from one computer to another. Please use the instructions and information located in the attached article for information on how to complete the process.
iTunes 11 for Mac: Use Home Sharing to import items from another iTunes library
Cheers,
Joe

I reseted my ipone and removed the number how can i get it back

i reseted my ipone and removed the number how can i get it back

Two solutions come to mind:
Use your phone to call someone, and have that person use Caller ID to tell you your phone number.
Contact your cellular carrier. Here's how: Contact a mobile carrier

Read two CSV files and remove the duplicate values within them.

Hi,
I want to read two CSV files(which contains more than 100 rows and 100 columns) and remove the duplicate values within that two files and merge all the unique values and display it as a single file.
Can anyone help me out.
Thanks in advance.

kirthi wrote:
Can you help me....Yeah, I've just finished... Here's a skeleton of my solution.
The first thing I think you should do is write a line-parser which splits your input data up into fields, and test it.
Then fill out the below parse method, and test it with that debugPrint method.
Then go to work on the print method.
I can help a bit along the way, but if you want to do this then you have to do it yourself. I'm not going to do it for you.
Cheers. Keith.
package forums.kirthi;
import java.util.*;
import java.io.PrintStream;
import java.io.BufferedReader;
import java.io.FileReader;
import java.io.IOException;
import krc.utilz.io.ParseException;
import krc.utilz.io.Filez.LineParser;
import krc.utilz.io.Filez.CsvLineParser;
public class DistinctColumnValuesFromCsvFiles
public static void main(String[] args) {
    if (args.length==0) args = new String[] {"input1.csv", "input2.csv"};
    try {
      // data is a Map of ColumnNames to Sets-Of-Values
      Map<String,Set<String>> data = new HashMap<String,Set<String>>();
      // add the contents of each file to the data
      for ( String filename : args ) {
        data.putAll(parse(filename));
      // print the data to output.csv
      print(data);
    } catch (Exception e) {
      e.printStackTrace();
private static Map<String,Set<String>> parse(String filename) throws IOException, ParseException {
    BufferedReader reader = null;
    try {
      reader = new BufferedReader(new FileReader(filename));
      CsvLineParser.squeeze = true; // field.trim().replaceAll("\\s+"," ")
      LineParser<String[]> parser = new CsvLineParser();
      int lineNumber = 1;
      // 1. read the column names (first line of file) into a List
      // 2. read the column values (subsequent lines of file) into a List of Set's of String's
      // 3. build a Map of columnName --> columnValues and return it
    } finally {
      if(reader!=null)reader.close();
private static void debugPrint(Map<String,Set<String>> data) {
    for ( Map.Entry<String,Set<String>> entry : data.entrySet() ) {
      System.out.println("DEBUG: "+entry.getKey()+" "+Arrays.toString(entry.getValue().toArray(new String[0])));
private static void print(Map<String,Set<String>> data) {
    // 1. get the column names from the table.
    // 2. create a List of List's of String's called matrix; logically [COL][ROW]
    // 3. print the column names and add the List<String> for this col to the matrix
    // 4. print the matrix by inerating columns and then rows
}

How to remove and change the color of Java cup and border

Hi to all,
How to remove and change the color of Java cup and border.
Thanks in advance
khiz_eng

This is just an Image. You would need to create your own image and call setIconImage(Image) on your JFrame.

[svn:fx-4.0.0] 13665: remove the call to clean-temp before the package staging starts.

Revision: 13665
Revision: 13665
Author:   [email protected]
Date:     2010-01-20 10:17:54 -0800 (Wed, 20 Jan 2010)
Log Message:
remove the call to clean-temp before the package staging starts. Removing the temp directory before the copy was removing the config updates that happen before this target is called.
QE notes: make sure the flex and air configs have been updated.
Doc notes:
Bugs: https://bugs.adobe.com/jira/browse/SDK-25160
Reviewer: gaurav
Tests run:
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25160
Modified Paths:
    flex/sdk/branches/4.0.0/build.xml

Before compiling the architecture must be adjusted in the FFdecsa/Makefile (defaults to athlon-xp).
The readme file in the src directory provides more details.

X120e 0596 screen wont wake up after sleep mode until unplug it and remove the battery

I recently purchased a Thinkpad X120e (0596) and am genneraly very happy with it however when it goes to sleep the screen does not wake up when the laptop does. when i wake it up i hear the fan spin up but the the screen remans powered off. ive tried waiting several minutes and it still doesnt wake up, ive also tried holding the power button for several (more than 5 ) seconds to force it to power off fully then start it again and the screen still doesnt wake up. the only way i can get it to work again is to make sure to unplug it and remove the battery for several seconds then i can get it to boot with the normaly expected complaints from windows after an abnormal shutdown.
I have the latest updates from lenovo and microsoft installed including the latest firmware. I like the laptop so i would rather report the problem and provide any information neccisary to find a resolution than have to return it. Ive seen this problem with other laptops before and know its probably a bug in the firmware thats not waking up the GPU is ther any tool i can use to provide the debuging info or any more direct way for me to report the bug I tried calling customer support and they told me they told me my only option was to return it and they could not report or record the issue.

Same issue here, confirmed many times in linux, will likely recur at some point now that I am on windows (8). The event log from the HAL says "The platform firmware has corrupted memory across the previous system power transition. Please check for updated firmware for your system" even after successful suspends, so who knows what happens when it fails. Since it's video-related, the problem could as well be in AMD's driver (also hinting at this is the fact the system periodically freezes when the screen is simply turned off from being idle).
Also worth noting is the fact suspend seemed to work just fine on my system with the factory BIOS (1.08), with the issue appearing only in newer ones (the oldest one still available for download is already affected, and I am running the latest one). There are also slight differences in the issue between the legacy and UEFI boot modes, but none of them mitigate it.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My iPad is disabled and won't connect to iTunes on any computer; I went to my iCloud and removed the iPad so it will erase all data when the iPad is connected to the internet (the original problem was a restrictions passcode we forgot)

Here is the order of what I did to my iPad:
1. A restrictions passcode was put on and we couldn't remember it. Despite numerous attempts at righting this, I couldn't. The iPad would not sync with any iTunes on any computer, Mac or PC.
2. I put a, 'use passcode after one minute' passcode on it and deliberately put in 10 wrong passcodes so it would disable the iPad. Now it still will not connect to any iTunes.
3. I connected to my iCloud account and removed the iPad from the cloud; it says it will erase all iPad data when it connects to the internet. I am fine with that, I need to know what to do now, though. iPad says, 'Connect to iTunes,' but it won't. Please help this amateur of all amateurs!!

See iPhone DFU mode explained, and how to enter DFU mode.

[svn] 3120: When you point Flex Builder at a local sandbox trunk build, it couldn' t generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build

Revision: 3120
Author: [email protected]
Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
Log Message:
When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/webapps/webtier/build.xml
Added Paths:
flex/sdk/trunk/templates/client-side-detection/
flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection/index.template.html
flex/sdk/trunk/templates/client-side-detection-with-history/
flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
flex/sdk/trunk/templates/express-installation/
flex/sdk/trunk/templates/express-installation/AC_OETags.js
flex/sdk/trunk/templates/express-installation/index.template.html
flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
flex/sdk/trunk/templates/express-installation-with-history/
flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
flex/sdk/trunk/templates/express-installation-with-history/history/
flex/sdk/trunk/templates/express-installation-with-history/history/history.css
flex/sdk/trunk/templates/express-installation-with-history/history/history.js
flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
flex/sdk/trunk/templates/express-installation-with-history/index.template.html
flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
flex/sdk/trunk/templates/metadata/
flex/sdk/trunk/templates/metadata/AC_OETags.js
flex/sdk/trunk/templates/metadata/readme.txt
flex/sdk/trunk/templates/no-player-detection/
flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection/index.template.html
flex/sdk/trunk/templates/no-player-detection-with-history/
flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
Removed Paths:
flex/sdk/trunk/templates/html-templates/

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

How can I remove the battery from my Iphone and Ipads?

How can I remove the battery from my iphone and ipad?

The iPhone and iPad do not have user serviceable batteries. Battery replacement is handled by Apple. Make an appointment at the Genius Bar if battery replacement is required.

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

My hard drive crashed on my Imac 24" 2009, I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card

Rewrite process and remove the call to f-54 and replace with bapi proces

Similar Messages

Maybe you are looking for