RF Monitor - add screen field
Hi.
Is it possible to add a field in the report and how? or is there any user-exit?
Thx.
If your client/employer allows CORE-MODS then go ahead and make the changes just as you'd change any screen field. If not, I suggest you look at GUIXT. This comes standard as part of 4.6 and up ...
I suggest that you add this field (and necessary PBO/PAI logic) in custom tab and use GUIXT to display this field in whichever tab/screen you choose to.
You can go to GUIXT.com and check out sample code on how to do this. Its very simple, you should be able to go through the tutorial and do it yourself.
Raj
Similar Messages
-
Procedure to add screen fields
hai
i have to add two screen fields to the standard
sap program SAPMF02D for the screen no : 7310
how i can i do this is there any
1) user exit
2) badi's
for this
i think badi's r the only alternative
can u help me in this
and what is the badi and what is the procedure
to add screen fieldhi Kira,
Check
BADI Link
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
REgards,
santosh -
I need to add a filed in selection screen for requirement category in collective access tab how could i do that. I need thre report based on requirement category also. Kindly help me
Senthil,
Would you mind sharing how you ended up accomplishing your change? I have a very similar request and am curious if there are any good alternatives to copying the entire program to a Z program. Your input would be very appreciated.
Regards,
Dustin -
Add custom field in the selection screen for shopping cart monitor report
Hello,
refering to the notes 458591 an 672960, in order to add custom field at item level, we get the structure INCL_EEW_PD_ITEM_CSF.
But this doesnt make it appear on the "Shopping Cart Monitor Report" selection screen.
So should I try adding it in the existing interface of the badi bbp_sc_mon ?hello Yann,
ok I will implement that. Is it possible to change the interface of the badi method to include more data if we want to check the role of the user who is executing the shopping cart monitor report and accordingly do the settings of field display ? Or calling a function module inside the method to get the attributes of sy-uname would be easier?
rita -
PLz Help me its urgent, how to add new field in mm01 basic data screen
Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee. -
Is it possible to add PERNR field to MIGO or MB1A transaction screens?
Hi,
Ours is a service industry with @ 10000 employees and we have implemented SAP with MM & HR module. We issue uniforms to all the employees when they join (new Joinee) and again once in January every year as reissuance. We intend to keep size information in employee masters in HR along with station code, designation, department and cost centers.
At present we are using two fields goods recipient and unloading point to mention employee code and type of issue (new joinee or reissuance). This is because employee code (PERNR) field is not there in MIGO_GI screen or MB1A screen.
Is it possible to add PERNR field to any of these transaction screens?
If added then we can fetch the relevant information about issuance of information along with station code, designation, department in Z report.
If possible, then how it can be done?
Thanks in advance,
SatishHi ,
as i understand we can add new fields in a transaction through user exit /field exit. so please discuss with your ABAP consultant & try to find out all the exit available for MIGO/ MB1A. then you have to decide which one will suit you. here you have to consider some factors like whether you need to enter values in the field or the field needs to fatch any value from any other table & should populate here.
the ABAPer can then write the code & add your required logic here.
i am not very good in this subject. just tried to share what ever i knew.
regards,
anubhab -
Is it possible to add a field to OKEK in configuration SCREEN?
Hello SAPPERS,
I would appreciate if someone could provide some input on the following issue.
Is it possible to add a field to Define Account Determination for Internal Goods Movements (OKEK)?
This table determines the GL accounts assigned when inventory is moved between plants. Is it possible to add another column to the left hand side? I would add the receiving plantu2019s VGCd, if possible. Even better would be a profit center group (1100 for all 11xx profit centers for example).
I know there are two ways to add field to the DB Table. They are INCLUDE and APPEND structure.
Is it possible to append a field to table V_T8A00, and display it in config screen OKEK?
Thanks for any adviceHello,
On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division.
When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100. When plant 1101 ships to plant 1301, we do want to post to 360100. Having the receiving profit center group in the mix will enable this distinction.
Thanks in advance -
Process to add new field to Account screen and update value from R/3...
We have CRM 7 and just wanted to ask what the process would be to add a new field to the Accounts screen. This field will be a read-only field and we'll source its value from R/3, based on some of the other data entered into the Accounts screen.
What exactly is involved in this process?.
I think I can use the new Application Enhancement Tool instead of EEWB to create the new field, but how does one identify which structure/table to change for say the 'Accounts' data, and, where does one place the code which populates this field, and, once the structure has been changed how do I physically add the field to the screen. I should be okay with reaching out to R/3 and populating the data, code-wise, but again wondered if there was anything inbuilt to do this, bearing in mind the closeness and constant access to R/3 from CRM.
Any help would be much appreciated.
Jason
Edited by: Jason Stratham on Apr 14, 2010 1:11 PMJason,
If you use EEWB or AET,, there is nothing manual you have to do, the fields will be added to all related tables and structures plus UI too.
May be sometimes you have to run the UI configration tool to add the field to the UI, again this is just a tool, there is not manual coding required.
you can enter the value for the fields direclty via UI, BUT if it is a display only field, at the time of save, you have to write couple of line to populate this field ( see set_property( ) method in the context node ).
Thats it...
Regards, Sudeep.. -
Is it possible to add a field in Attachment screen?
Hello Exports,
I wan to know is it possible to add a customer field in Attachment screen (Project, RFx,MA, A) . As there are a lots of attachments added in normal working in various documents like project,MA,RFX etc, so whether can add a field to categorize the attachment like it is project added attachments or RFx add attachment?
Would appreciate your comments.
Thanks & Regards,
DavidHello,
On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division.
When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100. When plant 1101 ships to plant 1301, we do want to post to 360100. Having the receiving profit center group in the mix will enable this distinction.
Thanks in advance -
Add Custom fields in Report Incident Screen in EHSM
Hello experts,
I want to add custom fields like Notification No. and division in Report Incident screen in EHSM.
I have added two fields.
Business Object: EHHSS_INCIDENT
Node: BASIC_INFO_ALL
Structure: INCL_EEW_EHHSS_INC_BINFA_D (added two fields using append structure)
Now how can i link with my screen and how to fetch notification data (standard F4 help)?
and when i save data, where it will save?
Can you guide me with proper steps for it as i am new in it.
Thanks in advance.Hi Jayvin,
To add the above fields on the screen, open the component configuration of the required screen.
Enhance the same and add the fields from the respective Node.
You did not worry about saving the data, once the fields are placed on the screen it will get save on click of save/ on event of save.
Regards,
Sanket. -
How to add new fields to Profit center screen (KE51)
Dear All,
I have a requirement that to add new fields to the Create Profit center screen KE51.
I couldn't find the user exits for the same.
Please help me in this.
Thanks.
RaviHello Ravi,
I must respcetfully disagree(with other posts) that it is not possible to extend CEPC. In our system we have added an append with two new fields to CEPC. Now, that was the easy part. You must also find a way to maintain those fields when creating and changing profit centres. To do this it was necessary for us to add a button to the create/modify screens. It was also necessary to find a few enhancement spots in order to make this work(and it still is not perfect). I am being very vague here because even though it is posible I would not recommend implementing this solution. It was very time consuming and could be risky if you miss something. There is a reason why you can find so little information in SDN and other places about how to do this. Other, including myself have tried but it was painful.
I know that this does not help very much.
Regards
Greg Kern -
How to add new fields in message creation screen
Hi All,
My requirement is to add another 2 fields in the message creation screen.
Also I found this link is bit useful.
Add custom fields to Support Message
Can anyone share the detailed procedure to add a field in the message screen.
Thanks in Advance.
Regards
Narasingam. BHello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S. -
Add new field infotype "z" in logical database selection screen pnp
Can add new field infotype "z" in logical database selection screen pnp
I could explain how to realize
ThanksIn case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
"Allocation operative area to optional delimiter
IF NOT p_aroper IS INITIAL.
DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
wa_texpr TYPE rsds_expr,
lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
wa_rsds_expr_tab LIKE rsdsexpr.
REFRESH lt_rsds_expr_tab.
wa_rsds_expr_tab-arity = '0'.
wa_rsds_expr_tab-fieldname = 'OBJID'.
wa_rsds_expr_tab-option = 'EQ'.
wa_rsds_expr_tab-low = p_aroper.
wa_rsds_expr_tab-high = '00000000'.
MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
APPEND lt_rsds_expr_tab.
REFRESH lt_texpr.
wa_texpr-tablename = 'PA9004'.
wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
MOVE-CORRESPONDING wa_texpr TO lt_texpr.
APPEND lt_texpr.
pnpdynse[] = lt_texpr[].
ENDIF.
English is the forum language.
Edited by: Rob Burbank on May 18, 2011 11:41 AM -
Add New Screen Fields in Delievery Line Item
Hello All,
We have a requiremnet where we should add 3 custom fields to delivery line item tabs,
please let me know how I can add a new tab for delievry line item tabs and how to add new custom screen fields in that tab,.
Thanks
Add New Screen Fields in Delievery Line Item
Edited by: kishore_99 on Dec 8, 2009 5:31 PMNo, I won't explain it in detail - you need to read the documentation and at least make an attempt at the process on your own first. The documentation is right there in the IMG where I said it was but here's the path since you can't find it:
Logistics Execution -> Shipping -> System Modifications -> Business Add-Ins in Shipping -> BADI for Additional Item Detail Screen... -
Hi,
I am trying to add a new check box to a custom screen. This check box must be connected to a new custom field of KNA1 table.
I have created a new z data element (CHAR) and a new z field on KNA1.
I have created the check box on the custom screen using screen painter.
When I change the value directly to the table I can see the change to the check box.
The problem is that I can't make changes through the check box (I change the value from the checkbox but after saving, the value doesn't cange to the table).
Is something more that I have to do?
Thanks in advanced.In our custom screen there are other check boxes that are not defined on FIELD statement and they functioning (when I change them, the contents of the table field changes). One of these checkboxes
is called ZZDATA_PUBLIC.
I have noticed that there is a subroutine called batch_input_0200 that has among other the following statements:
DATA: my_bdc LIKE bdcdata OCCURS 10 WITH HEADER LINE.
PERFORM bdc_field TABLES my_bdc USING 'KNA1-ZZDATA_PUBLIC'
kna1-zzdata_public.
there are PERFOM statements for every field on the screen.
The problem is that when I add a new PERFORM statement for my check box the program does not save the changes (When I change the value of the screen fields and save the values does not pass to the table)
the code of the form bdc_field is the following:
form bdc_field tables pt_bdcdata structure bdcdata using pw_fnam pw_fval.
clear pt_bdcdata.
pt_bdcdata-fnam = pw_fnam.
pt_bdcdata-fval = pw_fval.
append pt_bdcdata.
endform.
can anyone help me?
Thanks
Edited by: Odysseas Spyroglou on Jun 10, 2009 8:08 AM
Maybe you are looking for
-
Exported audio is same size of original video, after video'ss been cut
I have a 1.2GB video file, and its audio file is about 500MB. If I cut the video into pieces in iMovie, they get smaller, but the extracted audio piece is always 500MB. Is there any way around this ? Is it possible to split a video in QuickTime ? I w
-
When I try to send an email I get the message rejected by the server because it does not allow relaying. I have sent mails for months with no problems but has started to be recoccuring. Can anyone help please as its pointless having email on my phon
-
MTS-M2TS Converter for Mac or HD Converter for Mac or Click Wrap?
I am purchasing a Pansonic LUMIX DMC-ZS19K and it's HD format is 1080/60p. Which of the following softeares would be the most simple and effective to play/edit in iMovie: MTS-M@TS Converter for Mac HD Converfter for Mac Click Wrap It is quite irritat
-
Storage for Foreign Keys and Function based indexes
This may well be the silliest question of the day, but is it possible to specify the storage for a Foreign key or a function based index? I'm not even sure that it would make sense.
-
Interactions, triggers and events that can work in PDS
I have been trying to make interactions, triggers and events in Edge animate and then use them in Indesign - publish to DPS. I don't think I really managed to make any of them work. Is there anyone who knows what kind of interactions, triggers or eve