RFC Adapters for EBP and SUS systems

Hi!
We have Extended Classic Scenario up and running and now configuring SUS integration. We have done SLD configuration already and via TR SLDCHECK (has been executed on SRM server) has seen that XI connection is fine.
Now we have a question whether we need to configure RFC adapters for SUS and EBP systems? If yes, how can we do this?
Best Regards,
Siarhei

you need to define RFC connections between SUS and EBP  , only if you want user synchronization between the systems....
connection should be of type --> ABAP CONNECTIONS --> type 3
and this is only optional and not mandatory .
you can find more details at the following customizing entry..
TRANSACTION SPRO
--> Supplier Relationship Management --> Supplier Self-Services --> Master Data --->
Maintain Systems for Synchronization of User Data

Similar Messages

  • XI onfiguration in EBP and SUS systems

    Hi!
    I am configuring XI in EBP and SUS systems to be able to send POs from EBP to SUS and to get PO responses from SUS to EBP. Also we would like to have ASN creation in SUS funtionality to create inbound deliveries in ERP system, because we are running ECS.
    I have created HTTP (type H) RFC to XI system (XI_INTEGRATIONSERVER) and also configure integration engine via transaction sxmb_adm. But when I try to test RFC connection to XI system I always get the following error message:
    ICM_HTTP_CONNECTION_FAILED
    Could you please help me to fix this issue?
    Thanks and Regards,
    Siarhei

    do you also see any other message along with this?
    like HTTP 401? or something like that?
    and also make sure that the user --> you sepcify on the logon&security tab is correct.
    and this user should be available on the XI system -->and should have role ---> SAP_XI_APPL_SERV_USER
    Edited by: khan voyalpad usman on Apr 9, 2008 9:59 PM

  • Archiving SRM EBP and SUS Data at End of Contract Period

    Hi Team,
    We are implementation SRM EBP and SUS solution to one of our Customer.
    Below is our Landscape Details
    SRM 7.01 SP09
    Portal 7.3
    SP08
    MDM 7.1 SP07
    We have deployed all the application in our Data Center and customer have signed a 5 contract to use the solution. At the end
    of the 5 years, if the customer wants to move to other solution, they the want the master and all SRM related datas to be archived and copied in
    a media, where they can retain for 7 years.
    Please confirm how this can be achived the SRM solution
    Regards
    Ponnusamy

    Hi Experts,
    Can you please help.
    At the end of contract, period, if customer wants to migrate data from SAP SRM to some other SRM system, how it can be achieved.
    Regards
    Ponnusamy

  • EBP and SUS in same client

    Hi,
    If we habve EBP and SUS in same client do we need XI for connecting the two systems.
    Thanks,
    Manu

    sap OPTIONS TO OUR CUSTOMERS
    1. EBP and SUS on the same server but different clients
    2.EBP and SUS on different server
    3 EBP and SUS in one client: not recommended, only for test systems
    THANKS
    MUTHU

  • No system found for component and Evaluation system in the Project

    Hi Folks ,
    Im facing this problem when im trying to Execute the T-codes from Solar01 of the Transactins Tab by Selecting the Line item and clicking on Execute button. Following is the Error and there no logs for it.
    No system found for component and Evaluation system in the Project
    Even i have checked with the RFC settings and Logical components are right
    Please do suggest me - This is PRD issue . Try to do the needful .
    Thanks in Advance
    Amrita
    Edited by: Amrita Amrita on Dec 3, 2009 12:53 AM

    Hi all,
    I've had the same issue with regards to getting the error below when assigning transactions to a Blueprint business process.
    "No system found for component and Evaluation system in the Project"
    But I think I have solved it and seems pretty simple to change the system role from Evaluation System to any other that is relevant in your landscape.
    Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
    Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in my case Development)
    Click Copy
    This should replicate to all nodes and then you should be able to assign transaction to the business processes.
    Quite strange and seems simple, I checked the Solution Directory, Solar Project Admin etc etc but couldn't find the solution until this which should work.
    If not, there is a similar work around which also works.
    Go to transaction SOLAR_PROJECT_ADMIN
    System Landsacpe Tab
    Systems subtab
    Click System Role Assignment
    Remove the Evaluation System (or all those not relevant to your Project and Logical Components)
    Save Project
    Go to SOLAR01 and it should reflect it in the Blueprint.
    You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
    Hope this helps everyone,
    -Rohan

  • RFC adapters for BusinessService??

    Hi XI Friends..
    In my FILE to BAPI scenario..i am using Receiver as BusinessService and adapter as RFC adapter.
    can I use RFC adapters for  BusinessService ??
    please guide me..
    regards
    Ram

    Hi,
    Take a look at this link,
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
    <b>section Advanced Mode.</b>
    <i>If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
    If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
    The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values “”, “S”, “I”, and “W” are displayed. All other values are regarded as errors.
    To change this setting, set the indicator BAPI Advanced Mode.
    <b>In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution.</b></i>
    Regards,
    Bhavesh

  • Different SAPlogon screen for prd and dev systems

    Hi!
    I would like to distinguish the SAPlogon screen for production and development systems.
    For example:i logged into to the SAP system by SAPlogon and i want to see in the right top corner of the screen the letter P or D, etc.
    Could you advise me how to do it?
    Thank you!
    Dan

    I think this can be done but little difficult.
    After installing your sapgui, you have to change the picture in the right corner which you can find inside the folder programfiles-sap-sapgui and can search in the picture. If you replace the picture with your picture, you can find it there. But i dont think it can be done seperately for dev, qual and prod systems.
    With Regards,

  • Availability of Win 10 Drivers for *Current* and *New* Systems

    I was wondering if there is any timeframe for posting Windows 10 drives for *Current* and *New* Systems. I notice that there are only like 3 drivers posted so far for the X360 laptops. Even the brand new models which come with Windows 10 preinstalled still have only a smattering of drivers posted. Obviously the drivers exist since the system ships with them installed, why can't they be posted for download? I can understand driver availability taking some time for systems that didn't ship with Win 10, but for those systems that ship with Win 10 already loaded shouldn't those drivers be available to your customers on the the very first day of product shipment? In case you are wondering why it matters if it comes preinstalled already, it's because I plan on doing new, clean install of Win 10 Professional. Your systems are shipping with the Home edition. I have an X360 that is still being sold and shipping with 8.1. I would walk into Best Buy today and buy another one that comes with Windows 10, but won't do that until drivers are available so I can do a clean install. Thanks.

    digitaldocent wrote:
    After replacing a failed internal hard drive on my HP Pavillion dv2500 laptop, I installed a new Win 7 operating system rather than the Vista software that came on the computer.  After installing Windows 7 using a CD/DVD and a few other CD/DVD-based programs, my CD/DVD is no longer working.   It's now missing the device driver.  Searching HP Laptop  Drivers, I find a replacement driver for all operating systems except for Win7! 
    ??? >Where can I find updated/compatible Win7 drivers for my notebook to restore all of it's original features? 
    ??? >Can I install the Vista64 drivers for the original device drivers that came with the Vista operating system if Win 7 drivers are not available? 
    NVidia provided updated drivers for the graphics chip that installed fine. 
    Model: HP Multimedia Pavillion dv2500
    Running 4 Gb of ram, new 500GB internal HD (500GB external), Win 7 32 bit operating system
    Thanks,
    John

  • How do I setup RFC if Solution Manager and Target system are in same server

    Dear Experts,
    How do I setup RFC if the Solution Manager and the Target System (SAP ERP 6.0) are sitting in the same server?
    Do I really need to setup RFC?
    regards,
    Abraham

    Hello,
    An RFC is a Remote Function Call and is used to communicate between computer systems.
    A system can be on a server. Multiple systems can be on a single server, a single system can exist on multiple servers.
    When you setup the RFC Target it is the Host and not the system that is specified.
    You can get the host information when logged into the ERP system by running transaction SM59.
    This would then be the target Host in the RFC from Solman to the ERP system.
    As Miguel suggested this is rather simple. So I hope this has shone a light for you so you may proceed.
    But if you continue to have problems please advise.
    Regards,
    Paul

  • EBP and SUS in Classic Scanerio !!!

    Hello SRM Experts,
    Is it possible to implement supplier enablement (SUS) with EBP in classic scenario.  As far as I know there are two scenario in which SUS can be implemented.
    1. EBP-SUS Scenario :-Used for Procurement of Services and Indirect Materials.
    2. SUS-MM Scenario :-  Used for Procurement of Direct Materials.
    Currently we are in classic scenario SRM3.0 and want to upgrade to SRM 5.0 with SUS/LAC etc.. so we if we implement EBP-SUS scenario how the vendor will send purchase order/Response to EBP as in classic the PO is in R/3 not in EBP. Also in this case what all functionalty will the vendor (supplier) or  buyer (Purchaser) will have than the normal EBP-SUS scanerio.
    Thanks for your help.
    Prashant

    Hi Prashant,
    I had the same situation - based on testing and discussion during my running project OSS Note "543544 SUS ECS for EBP not supported" has been issued.
    Scenario SRM-SUS is NOT running in extended classic scenario.
    You can give it a try in classic.
    We are using SRM-MM scenario and have a working solution for indirect as well direct materials up and running.
    Kind regards,
    Claudia
    Please reward point when answer was helpful - thanks!

  • License for testing and production systems

    Hi Experts
    Can any one help me out on implementing license in my B1 System.
    According to our contract we have licensed following user types:
    User Type
    Licensed
    AddOn Access License    25
    Professional User                5
    Software Development Kit - Development Version 20
    We have Test/development system in one hardware and Production system on different hardware. Please advice me how to request/allocate license for my test/development system and production system.
    We tried creating a Test System in SAP Market place and requested license for test system. While requesting license for production system, it is found that the license is exceeded. In other words, developent system license also counted.
    Please advice me on the best practices of B1 license implementation.
    Thanks and regards
    Ajith G

    Hi,
    Our customer wants to Keep the production data secure. Developers and consultants should not have the access to it.
    Then you have only two options:
    1.Either you should maintain a standalone b1 server for the developers and consultants to test their solutions and scenarios.
    2.Otherwise you can create users in sql studio for accessing only the test database.
    So that as per your requirement
    All configurations and sample data will be kept in a test environment where developers and consultants can do their work.Once everything is correct Admin will do the transfer to production.
    Note:New users can be created in the sql studio under Databases-><Company Db>->Security->Users, Rt.click new user

  • User exit for Previous and current system status  for  5 transactions

    Hi Experts
    My Objective to capture the Previous and current status  of system status  for  5 transactions  in their  user exits .
    Description                                         Business Object               Transaction
    Production Order operations              BUS2005                            CO02 to edit Production Order
    Maintenance Orders                           BUS2007A                         IW32 to edit Plant Maintenance Order
    INTernal   ORDER                                 BUS2075                          KO02 to edit Internal Order
    WorkBreakdownStruct                       BUS2054                          CJ02 To edit the WBS element
    Project System Network                      BUS2002                           CN22 to edit Network
    Activities Network
    For Both Production order  and   Project System Network Activities Network    ,
    i got  User exit  "  EXIT_SAPLCOBT_001  " 
    But i am not sure whether we can use this or  not for our purpose . When i am changing status and  then saving ,  my  break point comes  to  EXIT_SAPLCOBT_001  .
    But  can we capture   JEST   or   JCDS  related  data   in that  user  exit  or  How can we capture both Previous status  and Current ( Means New changed status ) . For eg  From Released   to   Technically complete   etc.
    I want Status changed and its immedtiate previous status. 
    Do i need to check Exit  or BADI  before  and after Saving .
    Thanks
    Regards
    Gaurav
    Edited by: TheGaurav on Sep 8, 2011 10:28 AM

    Hi Himanshu
    Many Thanks for the reply . 
    I also had some other processing needs to be done on the basis of those status. .
    So do you have any idea or  how to find what all exits or BADIs  i can use for all of these 5 transactions , where
    i can get data for JCDS ( or JEST ) .
    CO02 to edit Production Order                 
    IW32 to edit Plant Maintenance Order
    KO02 to edit Internal Order
    CJ02 To edit the WBS element
    CN22 to edit Network        
    can we use   EXIT_SAPLCOBT_001  for    CO02  and  CN22   .
    Edited by: TheGaurav on Sep 8, 2011 1:21 PM

  • LabVIEW possibilities for Android and embedded systems

    Dear Sir or Madam,
    We are building some test environments based on your software and now we have came into discussions about future possibilities with LabVIEW. As there is a lot of information available we are getting a little bit confused about what we can do and what not with our current software. Now we own the "LabVIEW full development System for Windows" and we are interested in analysing the possibility of buying your application builder. The problem is that we would like to address, at least, two different issues with LabVIEW:
    1st: we want to build controllers and self executable applications that work in Windows, Linux, MAC and Android. I've read many possibilities on the internet about LabVIEW but I'm not sure about what systems are officially supported, so: Is it possible to build Apps for these three systems from the Windows App Builder? Is there support for Android? Do Linux Apps run with Android?
    2nd: The second issue is to embed LabVIEW into small microcontrollers to deploy our custom System managers and controllers. Is this possible? I've seen the ARM toolkit but I am not sure about what functionality of LabVIEW is available there. Can all the functions be used? Can it be customized to any device that is ARM? Is it possible to port to non-ARM devices or DSPs???
    Thanks in advance.

    You would probably be better off talking to your local NI rep.  Clicking the contact NI tab at the top of your browser would be a good place to start if you do not know your local rep.

  • Configuration steps for EBP to SUS

    Hi All,
       Can anybody please give EBP to  SUS configuration steps which is very urgently required .
    Thanks in Advance,
    Byomo

    Hi,
    Please find the Business Scenario Configuration Guide for Service Procurement.
    [http://service.sap.com/ibc-srm|http://service.sap.com/ibc-srm]
    Regards,
    Masa

  • Service product replication for test and developement system

    Hi Experts,
    In our scanario service product is created in production system and later manually created in test and developement system.
    Is there is any standard function module avilable to replicate the product master data into test and developement system
    Or Is it possible to use the middleware functionallity to replicate the service product details.
    Please advice on this issue.
    Thanks,
    Senthil .R
    Edited by: Senthil Vadivelan R on Dec 17, 2007 3:46 PM

    You can use the FindFile method in the TS API:
    FindFile Method
    Syntax
    Engine.FindFile ( fileToFind, absolutePath, userCancelled, promptOption = FindFile_PromptHonorUserPreference, srchListOption = FindFile_AddDirToSrchList_Ask, isCommand = False, [currentSequenceFile])
    The function itself returns a boolean which indicates if the file exists or not. 
    Then just use a Call Executable step to run command line string to delete the file.
    Hope this helps!
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

Maybe you are looking for