RFC Connection From SAP to Iseries server
Hi,
I wish you can help me wtih this issue.
We are running ECC 6.0 on iseries v5r3m0.
We are trying to connect to an other non-SAP V5r1M0 system. We are using OSS note 146624 for this purpose.
Our first problem is that we cannot copy pgm files to a V5R1 system from V5R3 system. This can be solved with manual extraction kernel.
However our problem is that we are getting an "SQL Error 0" short dump when we start abap report. What ever the entry in DBCON table is we get this short dump.
Did anyone configured RFC connection to a non-SAP Iseries system? What methos should we use?
Best Regards
Hello Volker,
it is some time ago, you posted the original message here. I have a follow on question and I hope you can help.
Apart from the redbook I can't find any documentation about rfc with iseries and that gives some examples but no real explanation about what you are supost to do
I followed the rfc example "ILE RPG evoked from ABAP" and I can get it to work, as long as I ask for only one parameter from the ABAP.
Do you know how to get multiple parameters from ABAP? Just repeating the RfcGetData with different parameters doesn't work. The ABAP will cancel with "no data to receive" on the second parameter.
Also do you know how to create a rfc-trace for these requests?
Best Regards.
Richard la Croix
Similar Messages
-
RFC connection from SAP Data services to SAP ECC
We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PMI am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time. -
RFC connection from SAP R/3 to OS400 server
Hi,
I am trying to establish an rfc connection between an R/3 system and OS400 server.
I dont have much experience on communication interfaces i have seen different options in SAPRFC.ini file but still i wanted to get some expert comments from the experts.
Please help me on this.
Thanks
Junaid.Hi,
We had the same scenario here also. You can call .NET code from ABAP program using SAP .Net connector.
The data can be downloaded to SQL server based on periodic job wise (every Half an hour or 1 Hour) .
1. Write an ABAP report to get new personnal numbers from HR master tables based on created date.
2. Create a RFC to pass employees details.
3. You can create a proxy in .NET server stub code based on the above RFC.
4. Write code to get data .NET object and establise a connection to SQL server.
5. Write code to push data into SQL server tables.
6. After you complete the .NET code, when you generate this code will create an exe file.
7. You have to execute that exe with few command line arguments.
8. The command line arguments need to setup in RFC destination (SM59).
9. In that ABAP report call this RFC with RFC destination as you defined.
.NET code can be done by .NET person.
Let me know if you have any clarifications.
Thanks & Regards,
Govind. -
RFC connection from SAP to AS400 system
Hi ,
I am working on a Interface requirement wherein I need to get connected to AS400 fetch some data and update in Shipment Document in SAP at runtime.
I am thinking about calling RFC but not sure whether it will work or not.
Has anybody worked on the requirement like this.
please help me out with this regard.
thanks in Advance,
NitinHi Nitin,
RFC works other way around. Means you can login from other system to SAP to get the data using RFC. For your requirement you can ALE.
Regards,
Atish -
Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System
Dears,
I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
==========================================================================================
**** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
Error: >Mon Jul 14 11:20:24,636< RfcException: [null]
message: Connect from SAP gateway to RFC server failed
Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
LOCATION SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
ERROR hostname 'cpe1601' unknown
TIME Mon Jul 14 16:20:25 2014
RELEASE 740
COMPONENT NI (network interface)
VERSION 40
RC -2
MODULE /bas/740_REL/src/base/ni/nixxhl.cpp
LINE 193
DETAIL NiHLGetNodeAddr: hostname cached as unknown
COUNTER 3
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
==========================================================================================
This problem happens when my app executes the line:
JCoServer myServer = JCoServerFactory.getServer(myServerName);
My system properties:
jco.client.lang=EN
jco.destination.peak_limit=10
jco.client.client=800
jco.client.passwd=********
jco.client.user=********
jco.client.sysnr=01
jco.destination.pool_capacity=3
jco.client.ashost=/H/155.56.49.28/H/cpe1601
jco.server.connection_count=3
jco.server.gwhost=/H/155.56.49.28/H/cpe1601
jco.server.progid=VSPAGUE
jco.server.gwserv=sapgw01
jco.server.repository_destination=VSPAGUE
Using SAP Logon i can connect to server cpe1601 system E16 without problems.
Please, I really need some help, because my knowledge on SAP platform is minimum.Hi Markus,
Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
As you could see, the host I'm connecting is from SAP RAC Service.
Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
System Connection Parameters
Description: SAP ECC 6.0
Application Server: cpe1601
Instance Number: 01
System ID: E16
SAProuter String: /H/155.56.49.28/H/
Below the connection information I received from SAP RAC SUPPORT for testing purposes:
E16 System:
SID: E16
Client: 800
System Number: 01
Server: cpe1601
Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
User: ********
Password: ********
SAProuter String:
If you don't plan to use SAPRouter at your end,
/H/155.56.49.28/H/ -
Crystal report- Connect from SAP gateway to RFC server failed
Hi All,
I am trying to connect to a SAP R3 system from crystal reports but it gives me below error.
Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were release along with Best practice reports v1.31
Error :
Logon failed.
Details: CMALLC : rc= 27 > Connect from SAP gateway to RFC server failed
Connect_pm GWHOST=10.10.4.63, gwserv=SAPGW30, SYSNR= 30
Location SAP-gateway on host ply.log.com/sapgw30
Error timeout during allocate
TIME ....
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1996
Detail no connect of TP sapdb30 from host 10.10.4.63 after 20 sec
Can you please help us solving this error.
Thanks
ChetanHi Stratos,
The SAP Version is ECC 6.0.
The below transports have been imported.
u2022 Open SQL Connectivity transport (K900574.r21 and R900574.r21)
u2022 Info Set Connectivity transport (K900575.r21 and R900575.r21)
u2022 Row-level Security Definition transport (K900576.r21 and R900576.r21)
u2022 Cluster Definition transport (K900585.r21 and R900585.r21)
u2022 Authentication Helpers transport (K900578.r21 and R900578.r21)
Thanks & Regards,
Chetan -
Connect from SAP gateway to RFC server failed
Good day and a happy new year to you all!
I am failing to connect to my SAP BW system from BEx. The logon fails with this message:
>>>>>Start<<<<<<<<<<
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=10.16.64.77, GWSERV=sapgw02, ASHOST=10.16.64.77, SYSNR=02
LOCATION SAP-Gateway on host bwsys / sapgw02
ERROR timeout during allocate
TIME Sat Dec 31 13:16:19 2005
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1785
DETAIL no connect of TP sapdp02 from host 10.16.64.77 after 22 sec
COUNTER 2
>>>>>>>>>END<<<<<<<<<<<<
I only experience this problem when connecting using any BEx component, but, I can successfully connect to the SAP BW system from SAP gui.
Additionally, I have the service 'sapdp02' defined in the services file, both on the workstation and the server.
What could be wrong or missing in my configuration?
Regards,
Joao.hi Joao,
check if oss note 447882 relevant
you may ask basis for help
Symptom
You want to access the customer system using the BEx Analyzer.The connenction fails:The system displays the error RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached" (host 192.168.4.2, service sapgw 00).
Other terms
SAP Gateway, RFC_ERROR_COMMUNICATION, partner not reached
Reason and Prerequisites
The SAP gateway host is deactivated or the TCP/IP port 33xx (where xx corresponds to the system number) is not open.
Solution
Issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc. -
Error: Connect from SAP gateway to RFC Server failed
Hi
I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
Please kindly help.
Erro: Connect from SAP gateway to RFC server failed.
Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
LOCATION SAP-Gateway on host hostname / sapgw03
ERROR timeout during allocate
TIME Wed Oct 31 05:31:45 2007
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1795
DETAIL no connect of TP sapdp03 from host hostname after 22 sec
COUNTER 3Hi K Patil,
Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
to make this work you have to make entry in the SLD of your server
fort that plesae acess this link.
Re: JCo connection Error
Re: wt is SLD.. how to do configure it
Please Reward Points if Helpfull.
Regards
Vinit
Edited by: Vinit Soni on Dec 19, 2007 7:20 AM -
JCO.Server Error while trying to execute a RFC program from SAP
Hi,
We are connecting to an external registered server program from SAP via Web Methods.
The external server program is registered with the SAP Gateway. We have created a TCP/IP RFC destination and are able to connect to the destination successfully via SM59.
An RFC function is created in SAP and is called using the syntax CALL FUNCTION "/NGN/BAPI_STRE_SEARCH_PROCESS" DESTINATION 'PRDB2B'. We have also handled the COMM_FALIURE and SYSTEM_FALIURE exceptions in the function call.
We are monitoring the gateway via SMGW and see a connection log to the RFC destination as below
Number - 10
LUname - dev01
TPName - sapgw00
User - KRAORANE
Status - CONNECTED
Symbolic - PRDB2B
Conversation - 86520353
Prot - REG
SAP return code - 0
CPIC rtn code - 0
The external program returns results as expected.
However sometimes the RFC fails and returns the message JCO.Server could not create server function /NGN/BAPI_STRE_SEARCH_PROCESS.
We are not able to figure what exactly is causing this error. Any help will be highly appreciated.
-KiranHi,
Please see the below links..
JCO.Server Error while trying to execute a RFC program from SAP
Re: JCO.Servcer could not find server function
Re: JCO.Server could not find server function 'SET_SLD_DATA'
/people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
Re: interfacing SAP with an existing java applications
http://help.sap.com/saphelp_nw04/helpdata/en/47/80f671ee6e4b41b63c0fe46bd6e4f8/content.htm
http://www.sapgenie.com/faq/jco.htm
Regards
Chilla.. -
Number of remote RFC connections to SAP from third party application
Hi All,
We are using an external application which is using the JCO API to make a connection to the SAP server to pass invoices. But the connections are note properly closed after invoking the RFCs and SAP seems to be not able to handle further requests once the numer of connections reach the maximum limit.
Could you tell whether there is a max limit on the number of connections opened to SAP from remote function calls from a third party product?
Is there anyway by which we can make sure that connections are properly closed in SAP after the each remote call?
Thanks in advance for your pointers.
Regards
ArunDear Arun,
Here are the parameter settings which you can do to set up RFC connections to SAP servers.
http://help.sap.com/saphelp_nw70/helpdata/en/c3/ce70a5cf0ab1499bfbf464e6e92de0/frameset.htm
This will resolve all your problems.
Thanks & Regards
Vivek -
FTP server not connected from SAP
Hi Expert,
I want to access FTP server thru SAP.But when I try to check RFC Destination SAPFTP connection test. It's gives error 'Error Details timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur'
What will be the reason.what setting I have missed to set.
Can anybody give me some tips of setting for connection of SAP to FTP server.
To complete these requirement what will be the prerequisite and what will be the steps to complete these task.
Answer should be rewarded.
Thanks in advance.Hi,
SAPFTP runs on the client (local PC), and SAPFTPA runs on the application server.
If you are connecting from your SAP application server to another remote host, then you use SAPFTPA.
If you are connecting from your PC to the remote host, use SAPFTP.
Please confirm about it.
These are standared FTP programs which allows you to FTP from within SAP.
The SAPFTP.EXE should be pre-installed in the users local harddisk before you can used this functions.
Do a check first by executing program RSFTP005. It will tell you whether it can detect the SAPFTP.EXE program.
RSFTP001 - SAPFTP version
RSFTP002 - Execute FTP Command
RSFTP003 - Test
RSFTP004 - FTP copy
RSFTP005 - SAPFTP check
RSFTP006 - FTP command list
RSFTP007 - Test FB:FTP_SERVER_TO_R3 / FTP_R3_TO_SERVER
RSFTP008 - Test FB:FTP_CLIENT_TO_R3 / FTP_R3_TO_CLIENT
Thanks
Swarup -
Remote Connection from SAP to MS-SQL server
Hello Experts,
We have been following 2 options so far and we have come across some issues
The first Option is to call a stored procedure (this is our preferred method) which does the data transfer for us
We have been able to test this scenario successfully from SQL Server side
However, while calling the stored proc via native SQL from ABAP we have come across an issue which is due to SQL 2005 changes (Schema implementation and difference in the security context)
While calling the stored procedure from the ABAP Code we have an error
The program short dumps with runtime error DBIF_DSQL2_SQL_ERROR, exception CX_SY_NATIVE_SQL_ERROR. The database error code is 15274, and the error text is
"Access to the remote server is denied because the current security context is not trusted."
This issue is new after the SQL Server 2005.
We are trying to resolve that.
Secondly we have been trying the DBCON option as well as per OSS Note 323151
We have a few things thatu2019s impacting our scenario:
The remote servers are in a different domain
The remote servers are located in DIZ
Remote server is a named instance
Remote server has been configured with a different port than standard (1565) u2013 All Connection strings will need port in there
The Database name starts with a numeric value
Due a combination of factors as mentioned above the standard approach does not work
Have any of you used this approach while connecting from SAP to MS-SQL server? Do you know of any successful methods to connect to SQL using ABAP (or not) from SAP.
Thanks in advance,Yes,
DBConnect & UDConnect.
Works like a charm.
We write data into a MS-SQL database via DBConnect & an ABAP program (using open sql). -
Connection from SAP ERP 6 to B1i2007
Hello,
the test-connection between B1i and SAP is working, but when trying to test the connection from SAP to B1i, SAP gives the error mesaage that "the program is not registered".
The B1i-System seems to be not registered in the SAP and it is only shown as "external client" (and not as registered server).
Another problem is that in B1i we have entered as programID-name "B1iRFC" but SAP shows "tomcat5" as TP-name.
I thought B1i would register automatically on the SAP with the name of the programm-id entered.
Do we have to change someting in the tomcat-server or where to find the problem?
Thank you,
PeterHello Eddy,
thank you for your answer, but in R/3 I define a RFC-connection with a registered server programm by using the programID out of the B1i-RFCP-configuration, right?
And when trying to make a test-connection, I got an error message that there is no registered program with this programID.
I thought that B1i have to be registered in SAP or in the SAP-Gateway with the name of this programID.
I think my problem is the registered server program in R/3. Where do I get this program and how to register in the R/3 gateway? Isn't the tomcat-server this program?
Best regards,
Peter -
HTTPs connection from SAP WebAS
Hello,
I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
The iSaSiLk authentication is based on client certificates.
I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated with no errors. When testing the connection we're getting the following error message:
SAP icm log:
[Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
[Thr 1087400256] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 1087400256] out: sssl_hdl = 0x1a3310c0
[Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
[Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
[Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
[Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
[Thr 1087400256] SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
[Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: hostname = "<remoteServer_to_be_accessed>"
[Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
[Thr 1087400256] SapISSLUseSessionCache(): Creating NEW session (0 cached)
[Thr 1087400256] Tue Jan 13 10:10:22 2009
*[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
[Thr 1087400256] session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
[Thr 1087400256] >> Begin of Secude-SSL Errorstack >>
[Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
[Thr 1087400256] << End of Secude-SSL Errorstack
[Thr 1087400256] SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
[Thr 1087400256] No certificate request received from Server
[Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
[Thr 1087400256] ->> SapSSLErrorName(rc=-57)
[Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
[Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
On the iSaSiLk server we're getting:
ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
ssl_debug(2): Received v3 client_hello handshake message.
ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
ssl_debug(2): CipherSuites supported by the client:
ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
ssl_debug(2): CompressionMethods supported by the client:
ssl_debug(2): NULL
ssl_debug(2): Sending server_hello handshake message.
ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): Selecting CompressionMethod: NULL
ssl_debug(2): Sending certificate handshake message with server certificate...
ssl_debug(2): Sending certificate_request handshake message...
ssl_debug(2): Sending server_hello_done handshake message...
ssl_debug(2): IOException while handshaking: Connection closed by remote host.
ssl_debug(2): Sending alert: Alert Fatal: handshake failure
ssl_debug(2): Shutting down SSL layer...
ssl_debug(2): Closing transport...
From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
Can anyone give me any suggestion?Hello Olivier,
Thanks for your answer.
I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
Filename SAPSSLSPHTID.pse
PIN <no>
Signature X
Encryption X
Profile Parameter
DIR_INSTANCE /usr/sap/XID/DVEBMGS00 /usr/sap/XID/D00
sec/dsakeylengthdefault 1024
sec/libsapsecu /usr/sap/XID/SYS/exe/run/libsapcrypto.so
sec/rsakeylengthdefault 1024
ssf/name SAPSECULIB
ssf/ssf_md_alg SHA1
ssf/ssf_symencr_alg DES-CBC
ssf/ssfapi_lib /usr/sap/XID/SYS/exe/run/libsapcrypto.so
ssf2/name
ssf2/ssf_md_alg SHA1
ssf2/ssf_symencr_alg DES-CBC
ssf2/ssfapi_lib
ssf3/name
ssf3/ssf_md_alg SHA1
ssf3/ssf_symencr_alg DES-CBC
ssf3/ssfapi_lib
Environment variables
USER xidadm
SECUDIR /usr/sap/XID/DVEBMGS00/sec
PSE
Validity 18.12.2008 19:47:04 18.12.2009 19:47:04
Algorithm RSA (OID 1.2.840.113549.1.1.1)
Test signature
Signature OK
Verification OK
Test encryption
Encryption OK
Decryption OK
As you can see, the cipher algorithm used is RSA. Any suggestion... ?
An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
Once again thanks for your answer. -
SAP DB Connection from SAP BI on HP UNIX to MS SQL External Database
Dear All,
Greetings!
I have a scenario to configure a SAP DB Connection from SAP BI System on HP UNIX 11i to the external legacy system MS SQL 2000 Enterprise for data upload. I am interested in connecting the SQL server as a Source System to the BI System.
I read through documents mentioning about installation of a Client driver in the SAP BI System, I also downloaded the JDBC client software and tried installing the same, but the steps as mentioned Setting the CLASSPATH or connecting to the server did not work.
Please help me in connecting the SQL Server as Source System, I would like to know in detail about the same - so kindly help me with the links to documents and guides about the same.
Thank you
Regards,
Vineeth DamodarShort answer: this does not work.
Long answer: To connect directly to the database you need
- a database client for the source system
- a database interface library for the source system
Both of them are not available for HP-UX if the target database is SQL server --> doesn't work.
What you can do is: add a Windows application server to your BI system (heterogeneous installations work and are supported) and add there the database client and the database interface library.
Markus
Maybe you are looking for
-
Macbook Pro 13 making soft creepy noise continously
Hi, My Macbook pro 13 is making soft (not exactly), creepy (Like something vibrating inside), continuous noise. We cound not hear it normally, but when I am sitting in office (silent area) i can hear it clearly and its really annoying. FanControl sho
-
Unable to check for purchase iTunes currently unavailable try back later
I keep trying, have for 3 days. I purchased a multi pass to a soap opera and only episode 1 downloaded. I also purchased a season pass to CSI and all have downloaded but 1. When I click on Check Purchases I get that error message. I've signed out, re
-
Debug.log in Today Records - What Does It Mean? Help Please!
Every day, my computer generates dozens of debug.log files in the today records... Some say debug.log.xxxxxxx.sent and some say debug.log.xxxxx.upload. What does it mean? How do I get rid of it? Please help! Is it (gulp) a virus? Can't find any info
-
Hi All, I want to install the application server (IAS 6.0 SP3) on a Unix (Solaris 8) server and web server (IWS 6.0) on another Windows NT server, in another words a webless installation. I have installed the IWS 6.0 on the NT machine and IAS 6.0 SP3
-
Dialog borderless and image, bug
Adobe Photoshop CC, Windows 7 x64 Code: var w = new Window ("dialog", "", undefined, {borderless: true}); w.margins = [0, 0, 0, 0]; var all = new File(File($.fileName).path + "/photo.png"); var tt = w.add("image", undefined, all); var b = w.add ("but