RFC Connection GFW_ITS_RFC_DEST connection test failed
I can test my IGS connection on SM59 for GFW_ITS_RFC_DEST on the central instance and 1 of my application servers succesfully. But my other 2 applications server failed on the test. What can I check whats the issue and resolved it
Regards
Naziem Mahomed
Hi,
we should focus on Re: SM59 test GFW_ITS_RFC_DEST fails on application servers and discuss the issue only once.
Regards
Matthias
Similar Messages
-
INTEGRATION_DIRECTORY_HMI Connection test fails
Hi ,
I am trying to configure INTEGRATION_DIRECTORY_HMI but the connection test fails as user cannot be authenticated. I found out that I need to put user XIISUSER in the logon tab. Now problem for me is that I do not know the password for XIISUSER.
Then I tried to search the user XIISUSER in SU01. For my surprise it was not there.
Can anyone tell me the steps to create XIISUSER and what roles I need to assign and where I have to register this user.
Thanks.
Regards,
RahulHi,
Try to use PIISUSER instead.Its default password is the master password that you can be given from the basis.
Regards
Yu Ming -
Workflow configuration error - System Account connection test failed
Hi,
Has anybody faced a problem with Workflow configuration? The version we are using is 2.6.2 on Oracle database 9.2.0.5 on AIX5L. The workflow installation from 9.2.0.1 installation CDs goes through without any problem. But when the workflow configuration tool comes up it fails with the following error.
"SYSTEM account connection test failed".
The system and sys accounts are fine as verified by sqlplus. Any help is greatly appreciated.
The log file is shown below.
Workflow Configuration Assistant-AIX
WorkflowCA:
WorkflowCA: Workflow Configuration in progress...
WorkflowCA:
WorkflowCA: Screen width -2304-, screen height -1024-
WorkflowCA: Graphics User Interface mode
WorkflowCA:
WorkflowCA: Language - US
WorkflowCA:
WorkflowCA: Start testing connection, which takes less than 3 minutes.
WorkflowCA:
WorkflowCA: Account connection test for SYSTEM
WorkflowCA: SQL Thread: Thread[TstSQL,5,main]
WorkflowCA: chkSQL: true
WorkflowCA: cmdLine: /app/oracle/product/9.2.0/bin/sqlplus system/<Masked Password> @/app/oracle/product/9.2.0/wf/sql/wftstcon.sql
WorkflowCA: envVar[0]: -ORACLE_SID=rsdb-
WorkflowCA: envVar[1]: -ORACLE_HOME=/app/oracle/product/9.2.0-
WorkflowCA: envVar[2]: -WF_RESOURCES=/app/oracle/product/9.2.0/wf/res/wfus.res-
WorkflowCA: envVar[3]: -TZ=EST5EDT-
WorkflowCA: envVar[4]: -WF_NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1-
WorkflowCA: envVar[5]: -PATH=/app/oracle/product/9.2.0/bin:/app/oracle/product/9.2.0/lib:$PATH-
WorkflowCA: envVar[6]: -LD_LIBRARY_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: envVar[7]: -WF_TNS_ADMIN=/app/oracle/product/9.2.0/network/admin-
WorkflowCA: envVar[8]: -WF_SHLIB_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: Exit Val : 126
WorkflowCA: chkSQL is alive after 1 seconds: false
WorkflowCA: SYSTEM account connection test failed.
WorkflowCA: Terminating...
Thanks,
ChethanWe had this problem on 2 machines.
On the 1st machine, we tried the local install option after a few days (Local option with no connect string) and it worked with no problems!
On the 2nd machine, we could never get it to work even after opening a tar with Oracle. Finally we did a remote install from the 1st machine into the database on the 2nd machine. During the remote install while running wfinstall on the 1st machine, we just had to choose the remote option and the database service name for the connect string.
Thanks,
Chethan -
CPA Cache Connectivity test fails
Hi All,
We are facing the following issues that have to do with the Adapter Engine:
1) In RWB, the Adapter Engine is in error/red status with the following details: Adapter Engine, message: fatal DeleteJob (Default Delete Job) failed.
2) In RWB, the Cache Connectivity Test fails with the following error: Communication with JMS server failed.
3) The CPA Cache refresh gives erros.
Any ideas? There are no Service users locked, SLDCHECK works fine etc.Hi,
It seems to like problem with your JMS Connector.
For this, login into Visual admin -->cluster >services>JMS connector-->runtime (tab)->check the factories / destinations. Please contact with your basis team, they will might be helpful to you. After that restart your server, it will solve your issue.
Regards,
P.Rajesh
Edited by: Rajesh_1113 on Jun 5, 2011 9:01 AM -
Cache connectivity test failing
Hi XI Experts,
The cache connectivity test fails in our XI system. The error appears as:
Cache notification from Integration Repository failedError when accessing the Integration Directory.
This happens almost daily at the same hour of the day. Can you tell me what items I can check within the system?
Thanks in advance.
Regards,
ReginaHi,
did you have a look at this doc:
https://websmp204.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Regards,
michal -
Hello all,
Proxy connect test failed because proxy server answers with 403 - Forbidden for tested domain: www.internic.net.
The check itself was correct as the proxy answers with used user login crendentials but the testing routines itself does not respect that.
Regards
AlexHi vshiller,
Could you share us more detailed information about this issue? For example, which kind of test type you were running? How did you run it in your side, local or remote?
>>Failed to initialize client proxy: could not connect to test process vstest.discoveryengine.x86.exe.
If you run your VS as the admin, how about the result?
Like this connect report here:
https://connect.microsoft.com/VisualStudio/feedback/details/807771/visual-studio-2013-test-explorer-only-works-if-run-as-administrator
You'd better check that whether it is related to the third party software.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
RFC connection (SM59) fails with load balancing enabled.
Hello All,
We have an RFC connection setup between two SAP systems. The RFC connection works fine if it points to the destination system. But if we enable load balancing, the connection fails with this error:
ERROR partner not reached (host <hostname>, service sapms<SID>)
LOCATION SAP-Server <source system> on host <host name of source> (wp 1)
DETAIL NiPConnect2
CALL SO_ERROR
COMPONENT NI (network interface)
COUNTER 3027
ERROR TEXT Connection refused
ERROR NUMBER 79
MODULE niuxi.c
LINE 1069
RETURN CODE -10
SUBRC 0
RELEASE 46D
TIME Mon Aug 18 18:33:30 2008
VERSION 34
I've checked the /etc/services file, the following entries exist
sapms<SID> 3606/tcp
sapms<SID>s 3600/tcp
lstst at the source system works fine
lgtst -H <target host name> -S sapms<SID>
niping at the target system has a problem
> niping -c -S 3606
Mon Aug 18 10:23:14 2008
connect to server o.k.
ERROR => NiTClientLoop: NiTReadLoop (rc=-6) [nixxtst.cpp 2629]
ERROR connection to partner broken
TIME Mon Aug 18 10:23:14 2008
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -6
MODULE niuxi.c
LINE 905
DETAIL NiPRead (0.0.0.0/0, hdl 1)
SYSTEM CALL recv
COUNTER 1
Please help me figure out the problem.
regards,
RoshniHi,
I think you have added wrong port entry in services file.
The entry of sap servers in services file for load balancing are
sapms<SID> 36<instance number>/tcp
so please check once again and add the entry using above formula in services file.
Also add the entry of all SAP servers in your hosts file.
<IP> <HOSTNAME> -
JCO Connection test fails taking wrong IP Address
Hi All,
We are configuring JCO Destinations(MODEL & METADATA) for ECC 6.0 system. Our portal is on EP7.0 SP8. Our server i.e.ECC and Portal are in two different networks.
The problem here is, for our ECC system we have two IP Addresses.
1. Internal IP Address (130...*) -- on which our ECC system is configured
2. External IP Address (10...*) -- to access the ECC from outside network.
We are able to connect to ECC system with external IP address from Portal server using SAP GUI. We have configured hosts file entries referring ECC system for external IP.
We have configured the ECC system in SLD and configured the JCO destinations for the same. But, Connection tests to the JCO system are failing (partner not reached) as it is referring to internal IP even though we have configured ECC system for external IP address in portal server.
We are getting the follwoing error for JCO Connection test:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=sapsys GROUP=ESS R3NAME=SYS MSSERV=sapmsSYS PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '130.7.8.88:sapgw00' not reached TIME Thu Dec 21 10:25:24 2006 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2764 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
<b>Why JCO destinations are trying to connect ECC system using the internal IP address even though we didn't mention it anywhere in our portal server configurations?</b>
Please Suggest
Thanks much in advance.
Cheers...
S..SHi
Please try this:
First remove the configured ECC from SLD.
Logon the SAP R/3 (ECC).
Run rz70 (T-code).
Enter the serverIP:port of the EP server in the host.
Enter the sapgw in the service.
Check the option SLDRFC for test and activate the current configuration
Then again add the ECC in your SLD.
And please check the entry in the host file also and try to ping the ECC server from the EP server.
Hope this will help you.
Thanks & regards
Arun Singh -
System Landscape connection test fail
Dear EP expert,
I try to do a System Connection Tests for my system landscape and some part of the test failed.. Anyone have idea what is wrong with the configuration. Below are the test result and mainly are the HTTP/S connection and user mapping failed.
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (devportal01:50000)
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (absmrq01:8001)
6. User mapping is not valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Thanks,
Regards
BryanHello gurus,
I am facing the same problem, could you please help me, the problem is http error detailed below
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name
6. User mapping is valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection successful
Thanks
Edited by: Akbar Gudur on Jan 15, 2009 6:24 PM
Edited by: Akbar Gudur on Jan 15, 2009 6:24 PM -
After a successful install, I am missing files and directories per this document:
Oracle® Database JDBC Developer's Guide and Reference
10g Release 2 (10.2)
I am trying to run a JDBC connection test to the 10g Rel 2 database per these instructions, and the verification of the installed directories fails. There is no /demo directory in ORACLE_HOME/jdbc, nor are there any jar files in the /lib directory except the ojdbc14 and ojdbc_14g ones. There is no /doc directory. There is no readme.txt. There is only ORACLE_HOME/jdbc/lib containing the ojdbc14 jar files (no classes12.jar or orai18n.jar).
Basically, almost the entire verification as outlined in 2.2.1 at this page
http://download-east.oracle.com/docs/cd/B19306_01/java.102/b14355/getsta.htm#i1005373
fails.
Shouldn't all these files and directories have been installed?
Any help appreciated.As David says, the version of Oracle you have installed has a reduced feature set. The entire Java subsystem has been left out to provide a lighter footprint.
Please refer to the thread titled Strawman Feature Factoring List - Feedback requested (Strawman Feature Factoring List - Feedback requested to get a list of features currently in, and a discussion around possible changes. -
Cache Connectivity Test fails for PI on MSCA
Hi all,
I experience the following problem with newly installed PI 7.0 SP12 system on MSCA.
When I go to RWB and press "Cache Connectivity Test" I got the following error for central adapter engine:
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.74.sapxi03, string], target element type: SAP_BusinessSystem)
Tx: SLDCHECK - reports no problems.
Tx:SLDAPICUST - is set to virtual host name and port.
Appreciate your help.hi,
here u have to clear the delta cache in SXI_CACHE.
Open Tcode SXI_CACHE -
>from menu XI Runtime cache----->start Delta Cache Refresh(F6 or CNTRL + F6 )
reward points if helpful
regards
sreeni -
Hi, I recently installed Lync 2013 with Edge server in DMZ. I have rather annoying problem. I bought godaddy UCC cert. installed it on edge server (external cert).
The problem is that when I try to test connectivity (https://testconnectivity.microsoft.com/) for one user it passes and for the other 2 fails with error . So I don't change configuration at all, just user that is defined in AD (Users exist)
Testing remote connectivity to Microsoft Lync server through the Lync Access Edge server sip.domain.com on port 5061 to verify user [email protected] can connect remotely.
Specified remote connectivity test(s) to Microsoft Lync server failed. See details below for specific failure reasons.
<label for="testSelectWizard_ctl12_ctl06_ctl03_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
Couldn't sign in. Error: Error Message: The endpoint was unable to register. See the ErrorCode for specific reason..
Error Type: RegisterException.
Deregister Reason: None.
Response Code: 404.
Response Text: Not Found.
Elapsed Time: 948 ms.Just one question I saw that Lync Access Edge Port can be changed. I can access via 5061 but via 443 I have a problem. It is probably ARR I have configured, but in general what I wanted to ask is will autodiscover will use 443? So I can basically close
5061 is that right ?
Testing connectivity to the Lync Autodiscover Web Service server for a secure connection on port 443 to obtain the root token.
Connectivity to the Lync Autodiscover Web Service test failed.
Additional Details
Elapsed Time: 1314 ms.
Test Steps
Attempting to test Autodiscover Web Service URL https://lyncdiscover.domain.com/Autodiscover/AutodiscoverService.svc/root.
Autodiscover Web Service URL can't be contacted due to failure of the following tests:
Additional Details
Test Steps
Attempting to resolve the host name lyncdiscover.domain.com in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 443 on host lyncdiscover.domain.com to ensure it's listening and open.
The port was opened successfully.
Additional Details
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server lyncdiscover.domain.com on port 443.
The Microsoft Connectivity Analyzer wasn't able to obtain the remote SSL certificate.
Additional Details
The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Elapsed Time: 262 ms. -
Define R/3 system in EP: System Connection Test failes
Hi all
I want to configure a R/3 system (fixed application server) in SAP EP Netweaver 04. I am pretty sure that the connection details and the user mapping is ok. When I test the connection I get
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
I now used the tool described in OSS Note 785029:
- When I test connection for the JCO Client Service using the system alias the test is successful
- When I test connection for the Connector Gateway Service for the same system alias I get an exception:
com/sap/portal/connectivity/ConnectivityRuntimeException
Any idea? What can go wrong between the Connector Gateway Service and the JCO?
Bye
MichaelHi Jan
Thanks for your help. I could only find trace files under
/usr/sap/<SID/><instance>/j2ee/cluster/server0. They seem to contain only the successful calls from testing the JCO Client Service.
I guess the UIDPW and JCO must be working because the JCO Client Service returns success. Only the Connector Gateway Service returns an exception.
I looked at various traces and log files, also used the RFC trace on the backend instance (SAP R/3 4.7). It looks like the Connector Gateway Service returns and exception before as actual call is done. Where would I find more information about the exception thrown in the Connector Gateway Service ?
Thanks
Michael -
Lync front end connectivity test fails (SSL certificate / URL problem)
We have a weird problem in our installation where Lync keeps complaining about connectivity issues to external reach proxy on our front end server.
The event log error codes are 41024 and 41026.
Here's the error from the snooper utility:
TL_ERROR(TF_COMPONENT) [0]1A14.0EE4::12/12/2014-10:31:30.901.0000000d (DataMCURunTime,DataProxies.ProcessResponse:1197.idx(601))
(0000000001595A27)Failed poking Proxy error=[The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.], type=[ExternalReachProxy], url=[https://dunords36.du.local:4443/Reach/DataCollaborationRelayWebService.svc]
The problem is that it makes the test with the INTERNAL FQDN (dunords36.du.local) and thus the SSL trust fails as the certificate is for our EXTERNAL FQDN on the front end server! I have verified this by testing the above URL with the external address and
the internal one. With the external one the certificate is OK.
If you're wondering; we do not use a reverse proxy. Instead we just have the firewall change the port and forward the traffic to our front end server. Our lync setup is a NAT'ed setup.
I know about the security risks so this is not what the discussion is about.
I can't find anywhere where i can change the above behaviour and tell lync to make the test on the correct, external FQDN. The settings in the topology builder all seems to be OK. And as you can see it does make the test on port 4443 which in our topology
builder is configured for our external FQDN.Hi,
Would you please elaborate your Lync Server environment (Standard Edition or Enterprise Edition)?
Please double check if you enter the correct external base URL on Lync Topology.
Please also check if the SAN of FE Server certificate correctly.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Cache connectivity test failed, points guaranteed
On WBR, we get errors when doing above test:
<b>Protocol Integration Server - JAVA
Hide Detailed Error Message
Mar 12, 2007 4:14:02 PM - Cache notification from Integration Directory not yet started or being edited
Attempt to fetch cache data from Integration Directory not yet started or still in process
[Fetch Data]: Error when accessing the Integration Directory
Detailed Error Message
[Fetch Data]: Connection to system null using application null lost. Detailed information: Error accessing "http://DEV.local.com:50100/dir/cachestatus/int?" with user "PIREPUSER". Response code is 401, response message is "Unauthorized"</b>
Please help. Thanks and points.This problem disappeared.
However, my adapter engine is still red.
When I click the CCMS button, I get:
<b>Error when processing your request
What has happened?
The URL http://dev.local.com:8001/sap/bc/gui/sap/its/webgui/! was not called due to an error.
Note
The following error text was processed in the system DEV : Template interpretation cancelled, syntax error.
The error occurred on the application server DEV_PDV_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPMSSY0
Function: RS_TREE_LIST_DISPLAY of program SAPLSEUT
Function: SALM_MONITOR_LOAD of program SAPLSALM
START-OF-SELECTION of program RSXMB_RZ20_CALL
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system PID in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server DEV_PDV_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server DEV_PDV_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: CHARLESZ -l: E -s: PID -i: DEV_PDV_01 -w: 0 -d: 20070312 -t: 163119 -v: RABAX_STATE -e: ITS_CANT_LOAD_INCLUDE
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
</b>
Maybe you are looking for
-
Help my audio doesn't work on my MacBook Pro
Ok so this is whatt happend: I was just on my Mac with my headphones, than decided to stop, so I pulled my headphones out. The next day I want to watch some videos but my audio didn't work, I went system prefrence and to "sound" to "input" and my mut
-
I recently upgraded to Mavericks then installed the first series of updates ( imovie, keynote etc etc ) but all of a sudden when I attempt to open Safari, I get a message from Virus Barrier stating " Blocked access to info.plist ". The dock shows the
-
Hi.. The requirement is as follows : SAP drops a file into a folder and triggers a UNIX script using a File Port partner destination. Unix script will perform a secure copy to the Webmethods server. If a Unix script error occurs, an Rfc function wil
-
Software problems on nokia asha 305
@armagon after update of new version 7.42 the phone becomes worst any app does not open also nokia browser,ebuddy,whatsapp and downloaded apps and does not play any video tells video quality too large only sound plays does not play any type of videos
-
Warranty lookup batch query doesn't work
Hi I encounter a problem with warranty lookup batch query here : http://csp.lenovo.com/ibapp/il/WarrantyLookupBatch.jsp Every time i try to access this tool i get this error : An error occurred while processing your request. Reference #97.b1ef54b8.14