RFC destination for Sender System in R/3 4.6c
Hi All,
I am trying create a RFC destination in R/3 4.6 system which will be used as sender RFC communication channel in Xi scenario. However i dont seem to have all the options such as activation type,gateway host and service which used to be there in SAP Enterprise or mySAP ERP systems. Can some one guide me to create an RFC destination in 4.6 system that will be used as a sender RFC system?
Hi Arul,
One more important point u have missed.
Program ID,
When ur configuring sender service from RFC,The most important point is Program ID.
Use some name and create it.Use the same name in SM59.
s such its very crucial .Activate them .make sure the destination for that programID is what u expect.
Reghards
chandra shekar
Similar Messages
-
Creating RFC Destination For UNICODE system From NON-UNICODE system
hi
how can i create RFC Destination For UNICODE system( XI ) From NON-UNICODE (R/3) system.
thanks and regards
Mithlesh Kumar JhaHi,
Check these blogs , Hope u would be getting some idea
<b>/people/thomas.jung3/blog/2004/06/24/bsp-150-a-developer146s-journal-part-v-xml-for-rfcs
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices
/people/sap.user72/blog/2004/06/19/how-i-started-with-sap-web-development</b>
Regards,
Sridhar Reddy -
RFC Destination and Logical System
Hi Friends,
Can anybody tell me how the RFC Destination and Logical System are related to each other?Hi,
In any ALE scenario u need one sender and one receiver system.
Logical systems are just logical representation of these systems but in case of RFC destination u specify technical parameters for those systems like IP address and username and password to connect to that system.
Thus when u create port i.e.we21 u specify actual RFC destination for the system to which u want to connect and when u create partner profile for that logical system u specify this port so when u want to send data to this logical system i.e receiver system port will be used which in turn has RFC destination which will be used to connect to that system.
In simple terms logical systems are logical representation of any system and RFC destinations are physical/techinical systems.
Thanks. -
RFC destination for synchronous communication (message type SYNCH)
Hi experts,
I am trying to configuare ALE settings.waht i did is
My sending & receiving systems are one server with different clients.By using SALE transaction
1.crated logical systems.(LS_800 &LR_810)
2.Assigned those to clients.
3.Created RFC destination
4. Created modelview assign sending & receiving
systems and message type.saved it.
4.generated Partner profile.Here i am getting below problem
Target system LR_810
RFC destination for synchronous communication (message
type SYNCH)
Partner profile LR_810 SYNCH does not exist
Generate partner profile or
specify outbound partner profiles for message type
SYNCH
Target system LS_800
RFC destination for synchronous communication (message
type SYNCH)
Partner profile LS_810 SYNCH does not exist
Generate partner profile or
specify outbound partner profiles for message type
SYNCH
Regards;
Upender.Hi Shital;
Thanks for your replay;
Still am getting the Same Error;
Thanks;
Upender. -
RFC destination of receiver system
Hi Guys,
I am trying to do the shell creation from scracth, and now i have found on the RFC destination creation there are three RFC connection which needs to be define. But my question is in this step we dont have any receiver system becasue export files has not been generated yet that will come after this step, so how can i proceed.
Regards,
SubhashHello Subhash,
In the step 'Define RFC Destinations' you create the RFC destinations for the SAP systems that participate in your project (or subproject).
Yes, you are correct, since the target/receiver system is not yet created, you cannot establish a RFC for the same.
Please proceed by maintaining the following:
Server name, System number , Language, Client, Username and Password for the control and the sender system.
Best Regards,
Mridu. -
How to create a RFC destination for extracting data to HANA
Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube -
HOw to find out the RFC destination from BW system to ISU
Hi,
Currently my requirement is to call a function module which is written in ISU (remote enabled) from BW system.
I am unable to find out the rfc destination from BW to ISU system.
In CRM we have table like smofparsfa1. Is there any table in BW which can provide me the ISU destination?
I need to compare the records stored in isu as well as in BW system.
I need to call a function module which will provide me the data from isu.
please help me in this regard.
KrishnaHi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman. -
RFC destination for your third-party tool
Hello SAP Guru's,
I have recently established external db connect for an iseries database. Now developers wants to use the open hub destination to extract data to non-SAP systems. They are using API: RSB_API_OHS_3RDPARTY_NOTIFY to connect a third-party tool to the BI system and use this third-party tool to distribute data to other non-SAP systems. To do so they need RFC destination for the third party tool. Could you tell me which RFC connection i have to use in SM59 ? I mean is it ABAP connection or TCP/IP connection or HTTP connection to external server?
I would highly appreciate any help on this.
FYI:
I have already gone through below help link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/8de3f4743b22a8e10000000a1553f6/frameset.htmThis will be of type TCP/IP.
You will need to create an RFC server application on the thirdparty system, and implement this function there. You will need to define that server application in your RFC destination definitions (host/Program).
You may need to read up RFC server help documentation; you can also browse the SAPGUI subfolders for RFC server sample applications and C code (if you have installed GUI in full, there should be such subfolders on your PC). You can also ask for help on 'application server' or 'abap' forums for this. -
No defineded RFC destination for global trade service----urgency!!!!
how can i resolve this problem for [<b>STOP]</b> Message, just on one sever, not connect any other R/3 system, when i execute mb1c,input a material information, and try to save the input messages , the system pop up the [<b>stop</b>] error:
<b> no defineded RFC destination for global trade service</b>
my system enviroment is:
win2003 server + db2 8.2 + sap ecc5Hi,
When you post an R/3 material document, the processing terminates with a system message indicating that no RFC destination has been maintained for Global Trade Services GTS.
This system message is unjustified since SAP GTS has not actually been activated.
This is caused by a program error.
Please read the notes-825448, and do the necessary corrections.
Hope this helps you out.
Rgds,
Suman -
Creat RFC destination for portal
Hello,
when i am doing RSPOR_SETUP , i am getting java and abap support package versions are different error message for step 2, i.e creating RFC destination for portal.
Please send me suggestion regarding this issue.
regards
Sreesudhais ur BI and Portal SP versions different ?? ....if true ?? make sure they have the same SP
use this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00bed70a-7501-2a10-ec9e-9a04485ab477
for guidance...... -
Hi,
I am working on ALE for Activity allocation. I am using 3 methods in my distribution model. I need to transfer data from ECC 6.0 source system to R/3 4.7.
BUS6010 Method POST & CHECK
BUS2072 Method FINDDETAILS
I am using the Program RHINLV00_LSO to transfer data.
When i execute this report it's throwing an error
" NO RFC Destination for 2 BAPI's".
An RFC Destination is created in SM59 to link the two systems and i have distributed the distribution model to R/3 4.7.
The Function modules are marked as Remote enabled function modules.
Regards,
Ramesh K.Hello,
Did you test RFC destination whether the definition is working fine or not?
You can test the destination,if it's working fine,then Bapis' should be able to execute.
Thanks.
Mark points if helpful. -
Hi,
I am working on ALE for Activity allocation. I am using 3 methods in my distribution model. I need to transfer data from ECC 6.0 source system to R/3 4.7.
BUS6010 Method POST & CHECK
BUS2072 Method FINDDETAILS
I am using the Program RHINLV00_LSO to transfer data.
When i execute this report it's throwing an error
" NO RFC Destination for 2 BAPI's".
An RFC Destination is created in SM59 to link the two systems and i have distributed the distribution model to R/3 4.7.
The Function modules are marked as Remote enabled function modules.
Regards,
Ramesh K.Hi,
After creating the distribution model with 3 methods in ECC 6.0 (source system). Generated Partner profile automatically from BD64. Then distributed the distribution model to the other system i.e., SAP R/3 4.7 successfully. Then created partner profile from that system automatically.
Port, partner profiles,outbound parameters, inbound parameters were created successfully.
Thanks
Ramesh -
Http RFC destination for ECC to PI Connection Error
Hi,
While doing the proxy runtime configuration http RFC destination for ECC to PI .
I configure the RFC destination as below ---
Target Host -- PI Host
Service No -- 50000
Path Prefix --- /sap/XI/engine/?type=entry
Login Security Details
User Id -- PI user id
Password --- PI password
While doing the Connection Test , I got the error "ICM_HTTP_CONNECTION_FAILED"
I checked T-code in ECC system SMICM and ICM is in green status and I checked the services are activated in SICF transaction.
Please let me know how to resolve this issue.
regards,
RohitHi Rahul,
I checked all service are activated in SMICM and I configured the FQDN also.
Now I cofigured the Service No --- 8000(http port no of PI) instead of 50000(J2EEport no of )
Target Host --- hostname
and did a Connection test...then I am getting a status as "http reponse 500" and status text as "empty http request received".
pls let me know is it correct configured or not.
regards,
Rohit -
Getting problem when creating RFC Destination on XI system
hi,
I m trying to create RFC Destination on XI system using sm59 tcode. In technical setting tab at Target Host field, i gave SAP ECC server IP address. and in Logon Tab I gave Login parameters for SAP ECC server (Client 400, User : 05 & Password for user 05). Current user and Unencrypted Password fields are unchecked. also Logon Scree is also unchecked in Security Option.
Problem is, when i click on Remote logon tab, It shows me Logon screen with client 000, User : 04 (which is XI system's user name) and Password. so it doesn't take given login setting for ECC system and if i tried this thing more than 3 times, ECC server block my pwd.
Please suggest me the required solution
Thanks & Regards
RiteshHi ritesh
First check if the user exists in ths system. Check the password especially. Because the password space (Number of characters)in SM59 screen is more than password character in SU01 screen.Check the password.
Secondly, Check if you have given the proper client in the destination box of SM59.
Check for the unicode test also.
If possible change the user type as service user.
When everything is perfect am sure the rfc connection should be fine... -
RFC destination for VMC (Virtual Machine Container)
Hi ,
Just loaded the CRM 70 system (customers, materials, contacts, ... ) and the KB from the back-office (ECC 6.0).
Calling the IPC via transaction COMMPR01 for a configurable material we have the following call in error :
FUNCTION ipc_get_knowledgebase.
CALL FUNCTION 'CFG_API_GET_KNOWLEDGEBASE' DESTINATION gv_vmc_dest
The RFC destination 'gv_vmc_dest' is empty . How to setup the RFC destination for VMC and the configuration so SAP know the RFC destination is the one to use for the VMC.
Thank youKlaus ,
Thank you , yes VMC is on the same CRM7.0 server , I do get the following short-dump .
Short text
"Found no handler for remote function module CFG_API_GET_KNOWLEDGEBASE"
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLIPC_API_CFG_COMMAND" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
In the target system, a short dump has been written as well.
More detailed information on the error cause can be found there.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "RFC_EXTERNAL_ABORT"
on the called page.
Trigger Location of Runtime Error
Program SAPLIPC_API_CFG_COMMAND
Include LIPC_API_CFG_COMMANDU07
Row 19
Module type (FUNCTION)
Module Name IPC_GET_KNOWLEDGEBASE
Maybe you are looking for
-
DACF,BC4J: How can i create RowSetInfo from VO generated by createViewObjectFromQuery
How can i create and publish RowSetInfo from VO generated by applicationModule.createViewObjectFromQuery()? And how can i set named AttributeInfo for that RowSetInfo? I can't use VO w/o Entity object generated by wisard becouse in generated code my q
-
Thunderbolt connect to dvi?
Can the thunderbolt connector be used on the 17 inch dvi monitors? Using a 15 inch MacBook Pro. Thanks.
-
Bill to address details for PO form
Hi, Can u get the table name and field name (name,other name,house number,street,city,postal code,country,country,tel1_number,extension) for fetching the details of BILL TO ADDRESS for PURCHASE order form
-
Small Material for Smart forms
Hello, I am new to smart forms and upgrading myself in the same field. Can you provide some material or a link from which i can be able to learn smart forms. I did'nt have that much time to go through the material, so if possible provide with the sma
-
Error when compiling Systinet WSDL using JWSDP
We are getting the following error when using Sun JWSDP tools (wscompile) to compile a WSDL document generated by Systinet: error: in message "PatientSearch_findPatient_bar.foo.mccs.WebServiceException_Fault", part "idoox-java-mapping.bar.foo.mccs.We