RFC: Meaning of program-ID ?

Hello everybody,
what is the program-id?
Does the name of the program-id has to meet special requirements?
Background: I have to maintain a RFC destination (tcp/ip) for rfc-sender to XI.
Regards Mario

Hi,
Because in the Sender RFC Channel you have to set the connection data of the R/3 System.
When you activate the communication Channel it will register on the rfc-destination of the R/3. From than on the R/3 know which system is connected to this rfc destination.
Regards,
Robin

Similar Messages

Multipe Sender RFC using same Program ID

Hi all,
I have RFC>XI>HTTP scenario. All confiruation has been done in R/3 and XI has ben done correctly.
Is it possible to use the same TCP/IP port Program ID created in SM59 (in R/3) for sending different RFC messages to XI. Meaning, in different XI RFC sender adapter communication channels, can I use the same Program ID.
When I tried, it work for one RFC, but when multiple RFC sender adapter uses same program ID..RFC program errors out in R/3 itself with error message - Commit fault: com.sap.aii.af.rfc.afcommunication.RfcChannelMismatchExcept.
Please help.
Thanks
Karthik

Karthik,
It is possible to send different messages from R3 to XI that use the one RFC destination and Program ID (in R/3) and the one Communication channel (in XI)
Assume that interfaces AAA and BBB have different structures
SAP R/3
For interface AAA
(1) Execute ABAP Z_AAA which
(2) Populates the internal table ITAB_AAA with structure ZST_AAA
(3) Calls the remote enabled function ZFN_AAA
(4) Passes the interface data in the tables statement
CALL FUNCTION 'ZFN_AAA' DESTINATION RFCCOMMON
 EXPORTING
 =
 IMPORTING
 =
 TABLES
 AAA = ITAB_AAA.
For interface BBB
(1) Eexecute ABAP Z_BBB which
(2) Populates the internal table ITAB_BBB with structure ZST_BBB
(3) Calls the remote enabled function ZFN_BBB
(4) Passes the interface data in the tables statement
CALL FUNCTION 'ZFN_BBB' DESTINATION RFCCOMMON
 EXPORTING
 =
 IMPORTING
 =
 TABLES
 BBB = ITAB_BBB.
Each function is called with the same destination RFCCOMMON
In SM59 point the RFC destination RFCCOMMON to your XI environment and provide a program id, for example ID_COMMON
XI
(1) Configure the sender RFC Communication Channel for example CC_COMMON and enter your SAP R/3 server parameters to include the program id ID_COMMON
(2) Configure the Receiver Determinations as follows
For interface AAA
Sender Service Enter your SAP R3 Business System for example R3PROD Interface ZFN_AAA (this is the SAP R/3 remote function)
Namespace urn:sap-com:document:sap:rfc:functions
Configured Receivers
Service Integration Process AAA
For interface BBB
Sender Service Enter your SAP R3 Business System for example R3PROD
Interface ZFN_BBB (this is the SAP R/3 remote function)
Namespace urn:sap-com:document:sap:rfc:functions
Configured Receivers
Service Integration Process BBB
(3) Configure the Sender Agreement as follows
For interface AAA
Sender Service R3PROD
Interface ZFN_AAA
Namespace urn:sap-com:document:sap:rfc:functions
Sender CC CC_COMMON
For interface BBB
Sender Service R3PROD
Interface ZFN_BBB
Namespace urn:sap-com:document:sap:rfc:functions
Sender CC CC_COMMON
Regards,
Mike

What does this mean: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem"? I tried reinstalling, but I get an error message saying something about permission to launch services.

What does this mean: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem"? I tried reinstalling, but I get an error message saying something about permission to launch services.

Solving MSVCR80 issue and Windows iTunes install issues.

Question: Can Jco RFC Provider registers Program Id for BW7.3

Hello, Friends
I encounter the following issue and I wonder whether it is supported by Netweaver product. Please help answer.
My scenario is to create RFC (TCP/IP Connection) in ABAP server with program id registered by Jco RFC Provider (Visual Admin of NW7.02 Java)
If my ABAP BW NW server is 7.02 version, RFC can be tested successfully. However, for this time, I worked on another ABAP BW NW 7.3 Server and I create the RFC(TCP/IP Connection) with program id registered by Jco RFC Provider. As a
result, the RFC cannot find the program id registered by Jco NW 7.02 Java. Does Netweaver support ABAP 7.3 RFC with Program id registered by Nw 7.02 java Jco RFC provider?
Thanks a lot!
Welkin

Hi, Ejersbo
If you are using 7.3 portal, you can refer to the following on how to register Jco RFC provider on 7.3 Java:
(1) Open http://<server>:<port>/nwa
(2) Search for "Jco RFC destinations", open "Jco RFC destinations"
(3) Create a Jco RFC destination, with program id in the same name as the one which is used in your ABAP RFC in SM59
Welkin

RFC error: transaction program not registered

Hi gurus,
I am facing one issue with RFC connection.
I am creating one TCP/IP connection from ECC 6.0 (windows 2003) to EHS/WWI application. i am getting following error when i am doing connection test.
error: Program <PROGRAM ID> not registered.
Then i tried to register the program by running the following command at OS level.
rfcexec u2013a program_ID u2013g ######id u2013x sapgw00
But still the error persists.
Please guide me. also does this command creates entry in saprfc.ini file? i have tried adding it manually in that file also.

I think you need change Activation Type Radiobutton.
I believe that you have checked "Registered Server Program", and with this flag you have to identify a registered RFC program. With an SAP gateway, an RFC server program can be registered under this ID and then wait for RFC calls from different SAP Systems.
Type T destinations are connections to external programs that use the RFC API to receive RFCs.
If it is Start, you must specify the host name and the pathname of the program to be started.

Problem with RFC connection - tp program not registered

Hello everyone
recently there has appeared a problem with the RFC connection on our system - we received the following set of messages:
Trace file opened at 20101221 130738 Central European Standard Time, SAP-RE
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Tp program is not registered.
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: xxx(Client: 100)
Destination: SIDRFC_IFSAPHRCZPKCP (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Program transakcji nie jest zarejestrowany
DEST =SIDRFC_IFSAPHRCZPKCP
HOST =%%RFCSERVER%%
PROG =IFCZPKCP
GWHOST =ssapprod
GWSERV =sapgw21
I tried to register program with a command:
rfcexec -aIFCZPKCP -gssapprod -xsapgw21
but with no success - the program didn't appear on the list of logged clients on the system in gateway monitor. Frankly speaking we do not know now what else we can do - please help!
We have ECC 6.0 (SAP_BASIS 700 SP18) on Windows Server 2003 R2 x64.
Thanks in advance for any help.
Regards
Peter

Hi Salim
thanks for your reply.
./rfcexec -a(PROG_ID) -gssapprod -xsapgw21 &
The syntax you're providing refers to UNIX systems, but I did similar thing on our Windows system - I tried all of the following methods (unfortunatelly without success):
rfcexec -a(PROG_ID) -gssapprod -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod -xsapgw21
rfcexec -a(PROG_ID) -gssapprod.domain -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod.domain -xsapgw21
Can you advise me what to do now?
Thanks
Piotr

RFC error: SLD_UC program not registered

Hello,
I am having a problem connecting my Abap system to SLD.
When I test the SLD_UC RFC connection, I get the error that the program is not registered.
I did see other postings on this, but no real answers that I can tell.
How can I troubleshoot the problem to get this program registered?
Thanks
Doug

Hi Doug,
Can you confirm the parameters specified under tab Technical setting --> Gateway Options(This should be your ABAP system gateway and host)
Also check whether server name and gateway host you can see using tcode smgw.
Hope this will help.
-Pinkle

Sender RFC comm channel - program ID

Hi all,
Short question:
I have RFC to FTP scenario.
Sender RFC channel needs a program ID.
I created a TCP/IP RFC Destination in source SAP system and specified in there the program ID i will use. However, when i try to test this connection, it throws folllowing error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program SAD_TO_DXI not registered
Error Details LOCATION: SAP-Gateway on host xxxxxx / sapgw05
Error Details DETAIL: TP SAD_TO_DXI not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 6852
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Wed Sep 26 17:21:55 2007
Error Details VERSION: 2
Could you please tell me how can i solve this?? and confirm this is the parameter i have to specify in the Sender CC??
Thanks in advance and kind regards,
David

hi David,
I guess the connection between R/3 and XI is not proper......
Connection between XI and R/3
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Also check the program ID
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
Also check discussion
Re: Why Program ID
regards
biplab
Use a Good Subject Line, One Question Per Posting - Award Points

Creating RFCs which emulate program activity - best practice.

Hi, First post on the forum so please be kind I'm hoping I've posted in the correct place.
I'm looking at creating a few RFCs to enable a bit of automation. Theory is that details are passed into the RFC and the function does some magic to update the system, hitting all the BRFs etc. The transaction I'm looking at is ICLCDC02, we're quite a few patches behind so there is a lot of good RFC stuff I just don't have access to.
My first attempt simply calls the relevant functions detailed in the program and ticks all the boxes but I have concerns. Then I had a look at BDC and found that SHDB couldn't replay some fo the screen selections - just errored out (and that was with a straight record and playback - no modification) so BDC is out for that reason and also some logic would be required so BDC is not really a good candidate IMO. My plan is to stick to calling the relevant functions which I feel may introduce some maintenance overhead.
Is there any pest practice for situations like this? Is there a way to run the transaction without dialog, call the relevant functions to add records etc accessing the global memory of the transaction then close/save ensuring that all future BRF changes etc get hit? If this is possible then it would greatly reduce/eliminate the maintenance overhead and get rid of my nagging doubt.
Or is my current approach the correct one?
Many thanks.

Hello,
"This will send work item to user (pr creator) sap inbox which when they double click it will complete the workflow."
It sounds liek they are sending a workitem where an email would be enough. By completing the workitem they are simply acknowledging that they have received notification of the completion of the PR.
"Our PR creator will receive notification of the PR approval to theirs outlook mail handled by a program that is scheduled every 5 minutes."
I hope (and assume) that they only receive the email once.
I would change the workflow to send an email (SendMail step) to the initiator instead of the workitem. That is normally what happens. Either that or there is no email at all - some businesses only send an email if something goes wrong. Of course, the business has to agree to this change.
Having that final workitem adds nothing to the process. Replace it with an email.
regards
Rick Bakker
hanabi technology

Any RFC calls from program RPCIPE00

Hi,
I want to check if there are any calls to the third party system are made form the program RPCIPE00. Can anyone please help me on how to find it?
Thanks in advance.

Hi,
Search your program name in database table TFDIR with mode 'R'. It will return all the RFC used in the given program.
Thank,
Alok

What is mean inclde programs

hai
guys
what is mean mean by inclding programs tell me detail level of programs any one send me answer plz
your regards
p.suresh

Hi,
Do you want to know what an include program is? or what is the meaning of the statement INCLUDE <Program> in an ABAP report?.
An Include program/report is a non-executable ABAP program which will usually have all the data declarations(variables, constants), sub routines, function modules which can be globally used in other executable reports. To use any of the variables or sub routines defined in an include program you should write the statement 'INCLUDE <programname> at the begining of the executable ABAP program/function module.
An include program can not be executed.
Hope this helps.
Regards,
Shilpa

How to use RFC in OO programming?

experts,
    As far as i know, we can call a function using RFC, such as:
     CALL FUNCTION 'HRRCF_MDL_CAND_OVIEW_RETRIEVE'
   DESTINATION lv_dest
   EXPORTING
     cand_hrobject         = stru_hrobject
     https                 = lv_https
   IMPORTING
     cand_overview         = ls_dataoverview
     messages              = lt_messages
   EXCEPTIONS
     system_failure        = 1 "MESSAGE lv_message
     communication_failure = 2. "MESSAGE lv_message.
Is there any way to call a OO（Object Oriented） method using RFC? I have studied the grammar of CALL METHOD, but i can't find some parameters to assign the destination.
Pls guide me. Thanks.
qiuguo

No, you have to use a function module as RFC. But you can create a custom RFC in the target system with the same input parameters as your method and call the method inside the RFC.
That should do it.
Regards,
Michael

Error 'Program not registered' while testing RFC connection PI_RFC

Hi Basis Experts
I am having problems while testing an RFC connection PI_RFC in one of our PI quality system.
Here is the Error log
Logon Connection Error
Error when opening an RFC connection
ERROR: program PI_RFC not registered
LOCATION: SAP-Gateway on host bp1xeuaa202 / sapgw01
DETAIL: TP PI_RFC not registered
Details COMPONENT: SAP-Gateway
COUNTER: 15866
MODULE: gwr3cpic.c
Details RETURN CODE: 679
We tried restarting the JCO-RFC provider service in VA,also tried restarting the Gateway service, tried registering the RFC using below command
rfcexec u2013g PI_RFC -a bp1xeuaa202 -x sapgw01
rfcexec u2013D PI_RFC
the command didnt gave any output also in SMGW tcode we didnt get the entry(PI_RFC) under system type as registered server.
Also we tried changing the Gateway hostname and service name in SM59.
Still we are facing the same issue, can anyone please help us in resolving this issue.
Regards
Syed

Hi,
It seems to like problem with your program is not registered. As suggested by spantaleoni, you can go through.
Here Program Id must be case sensitive. Once again check with your program Id.
And, you have to register your program id in Visual Administrator.
Goto Visual Administrator:
In that Select Cluster>Server>Services-->JCo RFC Provider
Then enter the Program Id and gw host & service.
Hope this helps to you.
Regards,
P.Rajesh

Program ID in RFC destination of type T

can one please explain what exactly is program id in rfc destination of type T

Hi,
from
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/042652488911d189490000e829fbbd/content.htm
"Type T destinations are connections to external programs that use the RFC library to receive RFCs."
so program id is the name of such a program
Regards,
michal

ABAP Certification - What exactly means the "dynamic programming" topic?

Hi all,
Actually i´m studying for my ABAP exam and i´d like to know what exactly means dynamic programming(of ABAP Advanced topic, take a look at http://www50.sap.com/useducation/certification/curriculum.asp?rid=493&vid=5).
Is it only about creating a new program dynamically? or anything else? I just want to know where will be my focus on it.
thank you!
André

Dynamic programming could refer to a number of things, but here I assume that it refers to such things like, creating a dynamic internal table at runtime, and/or using RTTS, or it could mean, simply using fields symbols.
Regards,
RIch Heilman

RFC: Meaning of program-ID ?

Similar Messages

Maybe you are looking for