Rfc To PI box

HI,
I Want post a RFC from my ECC system to PI box for testing. In general we process a IDOC through WE19. Now how to Post my RFC to PI box. Please help me Guys
Thanks
Hari

Hi Hari,
No need to do any extra configurations for sender RFC scenario. You can directly import your RFC from your R/3 to IR and proceed with the design steps if the initial configuration/connection is there from your R/3 to PI.
Please go through the blogs below:
The specified item was not found.
http://wiki.sdn.sap.com/wiki/display/XI/RFCtoFILE
Thanks and Regards,
Naveen

Similar Messages

Problem with external breakpoint in RFC in CRM box

Hi All
I have created a RFC FM to create new realtionship in CRM Box which is being called from Web portal. The issue is that when I set a external breakpoint in this RFC , two debugging sessions are getting created . In 1 session it creates the realtionship successfully and i can see the return table but then it goes to another session and finally displays msg "Relationship already exists". The relationship is getting created properly but the user will get to see wrong msg on the portal screen.
Can anybody suggest as to what could be the problem.
Regards
Babita

[enterprise portal in SAP CRM|http://sapcrmlearn.blogspot.com/2009/02/enterprise-portal.html]

Synch RFC--BPM --Sync JDBC

Hi All,
I am doing a schenario where in im using BPM.
Synch RFC from XI box will trigger the interface, then i will make a synch call to sql server & synch call(RFC) to R/3.
Can anyone please letme know the steps required in BPM.
Do i need synch-async bridge?
And also lemme know if i can map a ASyncronous Message Interface to a Syncronous Message Interface.
Can i Map source as Synch RFC & target as synch sql & synch rfc R/3.If not how do i map
Thanks
Sumit
Message was edited by: Sumit Khetawat

Sumit,
I just looked upo into one of my SYNCH AYNCH Scenarios and i have created my interfaces exactly like i mentioned in these steps,
<i>1. RECEIVE step ==> Opens SYNCH ASYNCH bridge and receives RFC request message.
( This will have a synchronous message interface associated with it. A synch abs interface and will be used for the PROPERTY ~~Synchrnous Message in the BPM) We would also need an ABS ASYNCH Message Interface created for the Request Message and this should be used in the MESSAGE ( after creating CONTAINER element) for the same. )
2. Transfrom step ==> Map RFC request message to JDBC request message. Mappinng between 2 abs Aynch Interfaces
( You will have container elements created for REq RFC as stated in the step 1 and another for JDBC request )
3. SEND synchronous ==> to send JDBC request and get the JDBC response.
( You will use a SYNCH ABS against MESSGAE INTERFACE , and also, a separate ABS ASYCNH for request and response )
4. TRANSFORM step==> Map JDBC response to RFC response . Mapping between ABS Interfaces
( same as step 2)
5. SEND ==> Closes SYNCH ASYNCH bridge and Send's response back to the RFC.</i>
Use the Container element created for the mapping in step 4.
In case of Split mapping, again you will need ABS ASYNCH Message interfaces.
Drop me a mail if you need screen shots.
Regards,
bhavesh
All you mapping in the BPM is between Asynch Abs Interfaces.

Problem in creating RFC

Hi All,
I am facing problem in creating RFC from lower to higher version of SAP, while creating RFC from ECC 5.0 to ECC 6.0 the system is not saving logon/security information, when i click on remote login it ask user n pwd again, please let me know the solution.
Thanks in advance
Shazia Khan

Hi Bala,
The exception given is only that much.
When I try to create the RFC, a Dialog box pops up and the error given is
<b>
ERROR file opened at 20070516 111750 India Standard, SAP-REL 640,0,154 RFC-VER 3 864900 MT-SL
T:5512 Error in program 'javaw': ======> You are not authorized to logon to the target system.
T:5512 Error in program 'javaw': <* RfcReceive [2] : returns 3:RFC_SYS_EXCEPTION
</b>
Please help me out.
regards
Brahmachaitanya

Problem in creating RFC modules in NetWeaver Developer Studio

Hi SDN,
Recently we have upgraded the portal server from EP6 SP9 to EP6 SP19. The applications which are getting data from the backend R/3 system are giving exception
<b> You are not authorized to logon to the target system. </b>
So we have now used the NWDS SP19. But we are not able to create the RFC modules as it is giving the same exception even in NWDS.
<b> How do I go about this???? </b>
regards
Brahmachaitanya C. Wajapey

Hi Bala,
The exception given is only that much.
When I try to create the RFC, a Dialog box pops up and the error given is
<b>
ERROR file opened at 20070516 111750 India Standard, SAP-REL 640,0,154 RFC-VER 3 864900 MT-SL
T:5512 Error in program 'javaw': ======> You are not authorized to logon to the target system.
T:5512 Error in program 'javaw': <* RfcReceive [2] : returns 3:RFC_SYS_EXCEPTION
</b>
Please help me out.
regards
Brahmachaitanya

Could not execute the RFC sender scenario

Hi,
My Scenario is RFC to File asynchoronous.
RFC is in XI box and I want the file to created on the XI box only.
I have created an RFC destination using Sm59 transaction on XI box. Following are the details
RFC Destination --> SAP_TO_XI
Connection Type --> T
Program ID --> PRG_ID
Activation Type --> Registered Server Program
Gateway Host --> SAPXIS01
Gateway Service --> sapgw00
I have created the Sender CC with the above gateway host, service and the program id.
I want to execute the scenario on SAP XI by executing the RFC on XI box through a report.
The following is the statement used in the report to execute the RFC
Data: LS_CTRY_DTLS TYPE Z_TEST_TABLE.
CALL FUNCTION 'Z_TEST'
DESTINATION 'SAP_TO_XI'
IN BACKGROUND TASK
TABLES
LT_CTRY_DLTS = LT_CTRY_DTLS
EXCEPTIONS
COMMUNICATION_FAILURE = 1
SYSTEM_FAILUE = 2.
COMMIT WORK.
The function module is not giving any error and at the same time, no messages are shown in SXMB_MONI transaction. Can you please let me know the reason for this.
Thanks
Priya

Hi Madhav,
Thanks for answering. I have done as you have said. The connection is working properly. I am getting the following message when I clicked on the Test Connection button.
Connection type:    TCP/IP connection
Logon:                      4 msec
   0 KB:                    1 msec
10 KB:                    3 msec
20 KB:                    4 msec
30 KB:                    5 msec
But, still I am not able to see the messages through SXMB_MONI

How to create a DB Source system in BW

Hi Guys,
Can anybody explain me how to create DB Connect source system in BW.
Points will be awarded.
Thanks,
Chinna

Hi Chinna,
Below are the steps to be followed for the SS creation in BW :
Prerequisites :
1.System Number
2.System IP address
3.ALEOLTP like userid and password this is the RFC user ID in the R/3 system. Usually set to communication - must be set to dialog in the R/3 Source System for the duration of the create/restore connection process. Note: the password must be in capital letters.(If all instances are in unicode system)
1.At the time of making the connection, the R/3 source system will need to be opened for client independent configuration.
2.If it is a connection create or restore, the personal userid of the person doing the work must have SM59 access.
Follow the naming convention which is being used in your system.
1.     Logon to r/3 source system using the r/3 RFC userid to check that the userid has been set to dialog user. It is mandatory that the r/3 source system userid be setup temporarily as dialog to create the connection. If not contact the requester to have this done before continuing with the next step.
Note: When re-checking to ensure that the r/3 userid is a dialog user, you may get prompted for new password. Change password, and make a note of the new password. Use this new password in the steps that follow for the r/3 RFC userid.
2.     Logon to BW system using your own userid.
3.     Enter transaction RSA1, In Source Systems, right-click on Source Systems as shown below to create new connection.
4.     In the screen select the appropriate Source System connection type. Suppose your are creating connection for r/3 instance, so in this case we pick the very first option.
5.     A popup window will get displayed asking for the necessary information. To fill in the appropriate information in the that screen you need the following information concerning the r/3 source system.
     IP address (Application Server) &
     System Number
Get this information for the r/3 source system from the SAP Logon Pad.
6.     If Parameters have been incorrectly entered then the following error message will appear : Check connection parameters for the source system.
7.     Re-check and re-enter correctly. If all is good then You will see the following prompt : Please log on as an administrator in the following screen.Click green check to continue.
8.     This will bring you to the r/3 logon screen. Logon using the r/3 RFC id. Once logged on click Check in Check RFC destination dialog box.
9. Consider the r/3 RFC destination screen.
10. Check to make sure that BW system information (Userid, IP address, System Number etc) is correctly showing in the Technical Settings and Logon/Security tabs. Next do the following,
     Step 1: Enter password for the BW RFC userid id.
     Step 2: Save Settings
     Step 3: From Test Menu , click on authorization. Ensure there are no errors
     Step 4: Back out of screen.
11.     System may ask you to logon as administrator again. Logon as in Step 10. This time click on Use in Check RFC destination dialog box.
Connection related processing will start up at this time, and continue for a little while (can be a couple minutes or more).
12.     Subsequently, a dialog box will show up on the screen.
13. Pick option, Replicate As Well.
Replication and activation of data sources & transfer structures will begin.
With the completion of this step you will have successfully established this source system connection. To confirm, right-click on the new source system entry and click on check
14. If the connection is good, the following message with the source system ID will display at bottom left corner of screen : Source system connection is Ok.
Hope this will be helpful to you.
Thanks & Regards,
suchitra.V

AAE doesn't support parameterized mapping ?

Hi,
is the AAE doesn't support parameterized mapping ? if yes any workaround for this limitation ? because i want to use JDBC lookup in my mapping ?
Currently, i am using PI 7.1 EHP1 SP3.
Thank You and Best Regards
Fernand

One thing more, as you can't use it it may bother you as you won't be able to use the new box in the graphical mapping to do look ups (JDBC, or RFC), as both boxes get the channel from a parameter.
However, you can still create your own UDF and do the lookup manually with java code, it's not a big issue. I had to do it for RFC lookups some times.

RFC -programing to send table from one SAP box to other

can some one share info on how to communicate data between two SAP boxes through RFC

Hi,
Goto SE 37. Create a RFC by selecting RFC in the Attributes. Enter the IMPORT/EXPORT/TABLES parameters.
Build the logic and activate it.
Now in the another system.
Logon to the same system/client. Call the RFC with the data. Import the return data.
If you want more details, please let us know your requirement in detail.
Best regards,
Prashant

JDBC-RFC no errors at XI BOX still records were not update at Target system

hi
am doing jdbc to rfc scenario
tested rfc at target R/3 and its working fine,but records were not being updated in jdbc-rfc scenario.
i can see the audit log as success but no record is inserted at the target system
think problem is at FM.
please look at my FM code.
FUNCTION zscp_fm_inb_task_act_eff_updat .
""Local Interface:
*" TABLES
*"      IT_TASK_DATA STRUCTURE ZSCP_S_TASK_EFFORT
DATA : v_taskguid TYPE bapi_ts_guid-task_guid,
         is_task TYPE bapi_ts_task,
         is_task_upd TYPE bapi_ts_task_upd,
         is_return TYPE TABLE OF bapiret2 WITH HEADER LINE.
*DATA : BEGIN OF it_data OCCURS 0,
        project TYPE zspr_project_id,
        task_id TYPE cgpl_entity-external_id,
        act_work TYPE dpr_tv_act_work,
        guid TYPE dpr_task-guid,
      END OF it_data.
DATA : BEGIN OF it_task_eff OCCURS 0,
           project TYPE zspr_project_id,
           guid TYPE dpr_task-guid,
           act_work TYPE dpr_tv_act_work,
         END OF it_task_eff.
DATA : BEGIN OF it_report OCCURS 0,
           msgtype(1),
           project TYPE zspr_project_id,
           task_id(24),
           msg(250),
         END OF it_report.
DATA : l_taskguid TYPE dpr_task-guid.
DATA : v_begintmstamp(20) TYPE c,
         v_endtmstamp(20) TYPE c.
*ranges : r_taskguid for l_taskguid.
DATA : v_tabix TYPE sy-tabix.
DATA : it_dpr_task TYPE STANDARD TABLE OF dpr_task,
         wa_dpr_task TYPE dpr_task.
*data : l_taskguid type BAPI_TS_GUID-TASK_GUID.
DATA : flg_no_flg TYPE c.
DATA : l_task(24),
         flg_error TYPE c.
DATA : l_taskdetail TYPE bapi_ts_task_detail,
         l_retdetail TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA : v_count TYPE i.
DATA curr_date TYPE sy-datum.
DATA curr_time TYPE sy-uzeit.
CONCATENATE sy-datum sy-uzeit INTO v_begintmstamp.
DELETE it_data WHERE act_work < 0.
DELETE it_task_data WHERE act_work_effort < 0.
IF it_task_data IS NOT INITIAL.
LOOP AT it_task_data.
   v_tabix = sy-tabix.
   CALL FUNCTION 'CONVERSION_EXIT_DPRCE_INPUT'
     EXPORTING
       input = it_task_data-task_id
     IMPORTING
       output = it_task_eff-guid.
   it_task_eff-guid = it_task_data-task_id.
   it_task_eff-project = it_task_data-project_id.
   it_task_eff-act_work = it_task_data-act_work_effort * 60 * 60.
   MODIFY it_data INDEX v_tabix.
   APPEND it_task_eff.
   CLEAR: it_task_eff, it_task_data.
ENDLOOP.
    LOOP AT it_task_data.
      it_task_data-act_work_effort = it_task_data-act_work_effort * 60 * 60.
      MODIFY it_task_data.
      CLEAR it_task_data.
    ENDLOOP.
    SELECT *
        FROM dpr_task
        INTO TABLE it_dpr_task
        FOR ALL ENTRIES IN it_task_data
        WHERE guid = it_task_data-guid.
*Begin Commented by Aparna/25/01/2007 so that all the tasks are updated irrespective the planned efforts are filled or not.
       and
            work_effort > 0.
*End
IF sy-subrc <> 0.
   MESSAGE e000 WITH 'No data selected to update'.
ENDIF.
    IF sy-subrc = 0.
      curr_date = sy-datum.
      curr_time = sy-uzeit.
      LOOP AT it_dpr_task INTO wa_dpr_task.
        CLEAR it_task_eff.
        READ TABLE it_task_data WITH KEY guid = wa_dpr_task-guid.
        IF sy-subrc = 0.
          wa_dpr_task-act_work_effort = it_task_data-act_work_effort.
          wa_dpr_task-act_work_unit = 'S'.
          wa_dpr_task-zzupdated_date = curr_date.
          wa_dpr_task-zzupdated_time = curr_time.
          CLEAR wa_dpr_task-flg_man_rem_work.
          MODIFY it_dpr_task FROM wa_dpr_task TRANSPORTING act_work_effort act_work_unit flg_man_rem_work zzupdated_date zzupdated_time.
        ENDIF.
        CLEAR wa_dpr_task.
      ENDLOOP.
      DESCRIBE TABLE it_dpr_task LINES v_count.
    ENDIF.
ENDIF.
IF it_dpr_task IS NOT INITIAL.
*{17Sep2007 Refresh all tasks before updating the efforts
    UPDATE dpr_task SET act_work_effort = 0
    WHERE version_number EQ space.
*}17Sep2007 Refresh all tasks before updating the efforts
    UPDATE dpr_task FROM TABLE it_dpr_task.
ENDIF.
ENDFUNCTION.

Not exactly an ABAPer but I dont see a commit work in the FM. Maybe this is an issue
Regards
Bhavesh

Populating a dropdown list box from from a RFC/web service call

Hello All,
So far all the samples that I have on dropdown listboxes pulls their values from the Simple Type Enumeration table. Howvever, If i will like to populate the dropdown listbox with returned values from an imported model, does anyone have any documentation on how this may be achieved ? Thank you.
from
Kwok Wei

Hi
If u want to populate the Values in DropDown from RFC call u can use the following code
IWDAttributeInfo ainfo = wdContext.node<<NodeName>>().getNodeInfo().getAttribute("<<Value Attrib that is bounfd to the Drop Down>>");
     ISimpleTypeModifiable st = aiinfo.getModifiableSimpleType();
     IModifiableSimpleValueSet vs = st.getSVServices().getModifiableSimpleValueSet();
     for(int i=0;i<wdContext.node<<Ur Table Parameter Name>>().size();i++)
          vs.put(Key,Value}
The Above code is for Drop Down by Key
For Drop Down By Index
for(int i=0;i<wdContext.node<<Table Paramter>>().size();i++)
          IPrivateFinancingPlanView.I<<NodeElement>> prodElement = wdContext.create<<Node Element>>();
          prodElement.set<<Value Attribute Bound to drop Down>>(wdContext.node<<Table Paramter>>().get<<Table Paramter>>(i).getDescription());
          <<Parent Node Element>>.node<<Child Node>>().addElement(<<Child Node Element>>);
Wishes
Krishna kanth
Message was edited by: krishna kanth

Box in bpm

hi,
wht is box in bpm .. and how it is used.
thanks in advance,
jp.

Hi Jp,
still not sure which box u r refering to..but plz go thru this docs. Hope this will clearify ur doubts..
Walkthrough with BPM:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
If you are refering to the steps that we drag n drop in BPM:
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
Can chk out these too:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
If ur query is resolved, kindly close the thread n giv points to the relevant ans..
kanan

RFC connection error between Netweaver 7 EHP1 and Ides ECC6

Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. Jimbob

Hi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh

Rfc connection error to saposs

Hi
while testing the rfc connection to saposs msg comes timeout occured
Error: timeout occured
Location : Saprouter 37.11 on SAPDEV
Componenet: NI
Counter : 1460
Return code: -93
Subrc: 0
Release : 640
Version : 37
Plz suggest me.

> Location : Saprouter 37.11 on SAPDEV
is the saprouter running on that box and is that box able to connect/ping sapserv?
Markus

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon              Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program sapfallback not registered
Error Details     LOCATION: SAP-Gateway on host filip / sapgw00
Error Details     DETAIL: TP sapfallback not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 1483
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1694
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Mar 31 02:44:35 2009
Error Details     VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

Rfc To PI box

Similar Messages

Maybe you are looking for