RG 23 C Register Number Range
Dear all,
Can anyone say were RG 23C Register Serial number ranges will be assinged.
Thanks and Regards
Hi
You can use the following objects for Register-A. From there you can view the number ranges maintained so far and the current status.
J_1IRG23A1
J_1IRG23A2
Regards,
Similar Messages
-
CRM ISA R/3 Edition on AP 7.0 Pricing Routine Number range error
Hi Experts,
For our R/3 ISA Secenerio I have developed a Pricing Prepare Routine (PRP). I have uploaded this routine into AP 7.0 ( which runs my IPC 5.0). Now when I try to register my PRP routine I'm not able to do so because of Number range not defined for Application V Scenerio A and Routine Type PRP.
My question are:
<b>1)</b> For a PRP type Routine( Multiple Implementation) is it important to assign a
routine number? ***( according to pricinguserexit manual dummy routine no
has to be assigned)******
<b>2)</b> If yes then how can i assign Number range for this combination.
NOTE: AP 7.0 has SP 7 ( So it fullfills requirment for Special scenerio)
I have never recieved a reply for my query from this forum... hope someone helps this time. <b>:)</b>
Regards,
Dipender Singhgo to http://www.configuration-workgroup.com/ and find technical doc about IPC 5.0 that i presented at Marco Island in 2006.
-
Number ranges for Business Partner
Hello experts,
Can you please guide how to define different number ranges for differenet different parner functions such Bidder and Employee.
Presently when I create a new employee for a Business partner who has newly registered with SRM, they both are getting same range of BP number, which makes the user list very long to manage/search while creating BID/Auction invitation.
Please guide me. Thanks in advance
VijayHello,
find below the settings of table T77S0 in our system. We use grouping Z4 for org units. Be aware of the fact that number range and grouping have to have the same ID in this case.
Regards
Wolfgang
GRPID SEMID GSVAL ETEXT
HRALX HRAC X Activate HR Integration
HRALX MERID X Enter Integration Error in IDOC
HRALX MSGRE 0 Recipient of Error Message When Creating BP
HRALX OADBP Business Partner of Standard Address
HRALX OADRE Address Necessary for Business Partner?
HRALX OBPON ON Integration O-BP Activated
HRALX OBWIG X Ignore Business Partner Warnings
HRALX ONUMB 2 Business Partner Number Assignment (Org. Unit)
HRALX OPROL BUP004
HRALX OSUBG Z4 Business Partner Subgroup (Organizational Unit)
HRALX PALEO Log: Organizational Units in ALE
HRALX PALEP Log: Employees in ALE
HRALX PBPHR OFF Employees Are Replicated from HR System
HRALX PBPON ON
HRALX PCATS Integration P-BP for CATS Activated
HRALX PINAC Activate ALE Distribution of Inactive Employees
HRALX PLEVE 3 Log: Detail Level of Error Messages (1 - 5)
HRALX PNUMB 3 Business Partner Number Assignment (Employee)
HRALX PPROL BUP003
HRALX PQUAL Import Qualifications
HRALX PRTON Log Active
HRALX PSUBG Business Partner Subgroup (Employees)
HRALX PSYNO Log: Organizational Units in Dialog
HRALX PSYNP Log: Employees in Dialog
HRALX USRAC X Create Relationship to User -
Hi,
Our company needs to register our PO number range for revenue regulations. However, our current PO document types refer to our purchasing organizations. Thus, our series is per purchasing organization and not per company. We now want to change our PO number range by creating a new PO document type and assigning the new number range series accordingly. Once this is implemented, will we be able to process our open POs with the old number range series?
Thank you.let me clarify:
you wanted to create a new document type to address your needs, that is okay and is usual a maintenance activity in a running system, even it may cause a lot activities, but you are actually starting from zero and this will not at all have any impact to the existing setup and their number ranges. you can still use the old PO document types with their number ranges. Hence no negative impact to the old documents.
If you want to continue with your old document types but using a new number range, then this has as well no impact to your old documents, because the number is only assigned and checked when you create new documents, it is not checked when you change old documents. -
Number Range scenario...best way of handling?
I was looking at a possible scenario:
There is one university with 100 colleges under it which is implementing HE-R.These colleges offer 500 programs of study in all.( 100 colleges * 5 programs each).Each register around 400 students to a program around the same time( Total students=500*400=20000).
In this scenario,how will the university administrator register students in a way that using the number range,he can differentiate a student on the basis of his college and program?
Some options which came to my mind was that he would create 500 number ranges and assign the same whenever a student is to be booked to the respective programs.The other option probably is that the administrator would change the 'current number'in the number range interval node. Do send your thoughts on the same.Yes, that is true for externally assigned ranges. However, if you use an internally managed number range, then the only thing you can change the number to is an externally managed number range. You could not change it to a number that is in any the INTERNAL number range.
The intelligent numbering is possible of course, but still introduces more problems than it addresses, and also much complexity, as you can see. Whenever an administrator pulls up a student record, all of the relevant organization and program data are displayed prominently in the student header. It is much easier to see that information directly than it is to remember the several dozen or hundreds of coded ranges.
Consider the analogy to general ledger accounts. Almost every legacy financial system uses intelligent G/L account numbering. Almost every customer that migrates to SAP starts off believing that those intelligent numbers are needed in SAP. In the end, though, it almost always becomes clear to all users (except for the most stubborn ones who will never be happy with any change whatsoever) that the SAP G/L structure is far more flexible and easier to report off of than any intelligent numbering scheme could be.
Perhaps in the legacy student system, the intelligent numbering is NECESSARY, because it is otherwise cumbersome and difficult to see the organization and program context of the student. This just isn't the case with SAP Student Lifecycle Management. We cannot take all the 'requirements' at face value. I would suspect that the real requirement is not 'We need intelligent numbering', but that 'We need to be able to easily and quickly ascertain the student's school and program'. -
Hi,
I have to maintain multiple number ranges (per location). How is it possible to assign a specific number range based on the user who creates a BP. Scenario is to create a BP with grouping selected based on the user sales org.
Thanks.
Jacob.Hi Jacob,
You need to write some Z code to achieve this functionality.
Go to transaction BUPA_EVENTS, and register your module under event BPNUM. In your module, you need to wirte the code to generate the number / choose the number range.
E.g :
You can use some 'memory get' module such as BUP_BUPA_BUT100_GET to get the info about which role is being created. Now,depending on the role, your code has to fetch a number. Or : use the relevant GET module to get user's sales area. Now, depending on the sales area, your Z module will choose a BP number range.
Your Z module will get called from within the standard FM BUP_NUMBER_GET, which assigns a number to a BP.THe Z module will override any default number the system chooses.
This will solve your problem.
Regards,
Rishu. -
Exhausted Number Range Invertvals
Hello,
I created number range using FBN1 but exhausted all of them till 99999999999 in one go. I want to delete this. Please guide me how to do this.
Thanks
RAYou two options:
Option#1. Create new company code and register new intervals
Option#2. Archive the existing documents start new intervals.
Thanks, J -
Excise invoice and domestic invoice sharing same number range
Hi,gurus,my question is addresed to the sap cin gurus
Scenario:-- Normally sap has provided provisions that the domestic invoice and the excise for the export will have different number range object
Transaction-snum or snro(As per the rule the no range has to be approved by excise authorities)
Requirement:--The present requirement of the client is that as per their requirement they will be using the same excise number range both for domestic and the export(They have got the approval from the excise department as per the amendment,that specifies the same)
so i request you to pls guide me as how can it be done in sap that two different business process will share the same number range.
as per my knowledge local excise number range is-J_1IEXCLOC
and for exports is-J_1IEXCEXPand the both will use the same number range and,suppose 1 local invoice is created and say if the no is 1,then if the export excise invoice is created the number will be 2,pls guide me how is it possible that the same number range should be used.
Thanks in advance---Anshuman chakrabortyDear sir,Thanks for attention towards the issue,but still i need to clarify some details-
the number range forJ_1IEXCLOC are already configured .It is not the case like i have to configure it for the first time however ,so the issue remains how shall i proceed in this case
Sir,i have already checked the transaction j1iin,it does not give any such box to check the-use local no range
infact the error message which the system was throwing to the user that-number range object not assigned for Object: J_1IEXCEXP.
The question remains from my side is what are the complete configuration steps I need to do ,to make the check box appear so as to select-use local number range,and is there any thing to be conveyed to my developer,so that the same appears,
or is it the case like the anything should earlier have been done before the number range for J_1IEXCLOC was created.i would request u to pls guide me giving the complete details of the step to be followed.
Thanks in advance
Anshuman chakraborty -
Urgent : Unable to maintain the Number ranges for Excise Groups
Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga RamHello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet -
How to find next number range for project definition in tcode CJ20N
Hai Experts,
Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
Note: I searched in forum before posting, but couldn't find the solution.
Thanks
Regards,
Prabu S.Hi,
For project defination internal number is assigned by system.
When you saves's project then system allocate one number to project defination, you can view it,
SE11 >>> table PROJ >> Click on contents >>> execute,
here you will get your project defination & number is assigned to project defination.
kapil -
How to assign numbers in external number range?
Dear experts,
Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
Thanks in advance.
Regards,
Haris
Edited by: harissahlan on Oct 19, 2011 5:44 AMWith external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.
-
Number ranges for material document (migo) and inventory documents
Hi Gurus,
We need a different number ranges for goods receipt documents and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it is the single transaction code used by different companies and how to give different number ranges.
Regards,
Sri........Hi,
I think number ranges of inventory documents are on client level not on company code wise . because even though your creating new document and assigned different number ranges for the documents but these while assigning ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level not at company code level. -
Number range purchase requisitions at storage location level
How can I define a number range for purchase requisitions at storage location level? I have one plant with several storage locations and I want a number range for purchase requisitions per storage location.
what is the background to this request?
I guess that the requestor can easily identify their own requisitions among many.
I dont think that this is necessary with SAP, do not put to much importance in numbers, there are many other options to meet the users requirements. -
Billing doc external number range
Hi Guys,
As per my knowledge billing doc uses only Internal number range but when i check table: TVFK i can see No. range external maintained (XX) same maintained my company where shall i config this please give me idea and steps.
Regards
JACKHi Jack
In VN01, number ranges for all will be maintained wherein you can see on the right side a tab "Ext". If you tick in this box, assign to your billing types in VOFA, then whenever you do billing, external numbers will be generated.
Reward if this helps you.
Thanks
G. Lakshmipathi -
Accounting Document No Number Ranges
I have got a requirement wherein the client has asked for the Accounting Document Numbers has to be at Plant Level, & not the Company code level...
Kindly inform me is it possible to allocate the different Number Ranges for Plant Levelhi ASHWIN,
how many plants are there? If not too much, say less than ten, you can create separate document types for the plants. To the different document types you can assign different number ranges. On the other hand you have to write exits, that the proper document type is used in case of MIRO posting for example. You need to create validations as well, that a specific document can only be used for a specific plant (in case of manual posting).
hope this helps
ec
Maybe you are looking for
-
Will I lose files when I perform Lion Recovery?
Will I lose any files when I perform Lion Recovery? I have been having some problems with my 2011 MacBook Pro 13-inch lately and am considering using Lion Recovery to solve them.. Will I lose any of my files when installing a fresh copy of Lion with
-
WLS not able to login with OID user
Hi I have installed WLS 10.3.3 and had configured a new security realm which had OID as the authenticator . Set the details for the provider (OID) and updated , restarted the server . It was working fine till yesterday and I verified this by logging
-
Sync Pay Scale Group/Pay Scale from Job link to the Position
Hi , We need an automatic way to sync the Pay Scale Group and Pay Scale Level in Infotype 0008 when we do a Job change to the position in transaction PO13 . What is the best way to do that ? As SAP a standard sync. routine ?
-
Access Java app message loop from ActiveX control running in JNI
Anyone know how to access a Java application's message loop from inside JNI code? Through the (JNIEnv *env) or (jobject obj) parameters maybe? I've got an ActiveX dll that I'm running via JNI. The ActiveX dll creates an IP server on a separate thread
-
Hi all, I want to design a step-by-step interactive process where the user will enter input at each step of the process. For example, when the user sees a work item in his list, he will acquire this item and perform some action on the item. When the