RG registers and PLA registers - Extraction Problem

Hi,
We have updated balances in table J_2IACCBAL for initial entries for RG registers and PLA registers but the same is not available for extraction in J2I5.
Could you please advise what the problem is?
Regards
Santosh Hegde

Hi Prasanna,
We have updated the balance as on 31.03.2007 as per SAP Help. We tried extracting as on 31.03.2007 as well as 01.04.2007.
Cut over data is as on 31.03.2007 and golive date is 01.04.07.
Pls help
Regards
Santosh Hegde

Similar Messages

Dump when run J2I5 - Excise Registers Extraction

Hi,
When we run the J2I5 - Excise Registers Extraction (with Register RG23D), it is giving the run time error The ABAP/4 Open SQL array insert results in duplicate database records.
This error is showing after 04.08.2009 to till date..But before till 03.08.2009, it is working file...
What should be the problem????

Hi,
Check notes:
965938 J2I5 extraction gives a dump for RG23D
957105 Short Dump while extracting RG23D register in J2I5
842079 Additional changes to NCCD,ECS - J2I5
1087108 RG23D:Short dump and timeout error in j2i6.
1094202 DUMP while cancelling the download of register RG23D in 46C
Regards,
Eli

Data mismatch between TABLE and Std. Extract str. (AFPO & 2LIS_04_P_MATNR)

Hi,
I am getting data mismatch in ECC standard table and ECC standard extract structure. Please help me.
I am using 2LIS_04_P_P_MATNR data source (standard extract structure).
I have following data in ECC Table (AFPO - Order Item).
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 0
PSMNG (ORDER QTY) --> 2000
Extract Structure is showing following data.
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 2000 (It should be zero)
PSMNG (ORDER QTY) --> 2000
I have checked with many other order numbers. The extract structure in RSA3 is showing correct values only if PGMNG is non-zero values. If PGMNG is zero, then it is automatically assigning PSMNG value.
Is this common? I want to display correct values for PGMNG from AFPO Table. Why this mismatch between table data and extract data. I have done all required steps refreshing data (deleting setup tables, filling set up tables etc.).
pls suggest. Poinsts will be assigned to every useful answer.
Thanks in advance.

Hi Avneet,
I have a similar problem where in AFPO shows value 1000 in PSMNG field and 1200 in RSA3 for extractor 2LIS_04_P_MATNR.
I have found that the standard feature of the extractor extracts the data at the time of release of process order. If the process order is changed after the release then the extractor will not picup the chagne.
Ex: AFPO value 1000 ---BI Value 1000
Now released in ECC
AFPO value 1000 ---BI Value 1000
In ECC value changed to 1500 after the release. BI will not pickup the change.
Extractor is pulling the data from MCAFPOV table. You can check the values, there it matches with RSA3 values.
I was just going thru forums for the solution. After i found the solution. I am just updating it.
Hope it helps you.
Thaks
Srikanth

2LIS_02_SCL : Extracting problem

Hi,
I tried to load 0PUR_C01 with 2LIS_02_SCL ( FULL method ),
but in the monitoring I've got 0 record and an Extraction error which deals with data selection.
Note : I do no selection in my infopackage.
In R/3 my setup tables are filled :
MC02M_0ITMSETUP
MC02M_0SCLSETUP
When I check with RSA3 I've got a lot of records.
For information, I had the same problem with 2LIS_02_ITM
when I used INIT or DELTA infopackage.
But it's work with a FULL infopackage.
Nevertheless, nothing work with 2LIS_02_SCL.
What can i do ?
Thanks
ps : I'm working on SAP 3.5

1. Replicate the data sources and activate the info source.
2. Check the update rules and activate them.
3. Double click on the step -by step in load monitor, what does the error say?
4. Can you copy and paste the error message here we can look at .
Ravi Thothadri

Uploading of RG 23 A RG23C and PLA balance

Dear SAP Guru's
Could anyone provide any documents with regard to how to update RG23 A, RG23C and PLA Excise balance.
Regards
Karthikeyan G
Edited by: ganesaka on Jun 30, 2011 12:27 PM

Dear All,
I am not getting any response from anyone.
If there is any solution to the problem, please advice.
Regards
BIJUDAS

Any progress on the ACR 7.3+ Bridge repeat thumbnail extraction problem?

Any progress on the ACR 7.3+ Bridge repeat thumbnail extraction problem?
It was very good news that the cropped lens-correction repeat extraction bug was fixed in 8.2, but this newer problem, surfacing in the ACR 7.3 update (and still present in 8.2), is causing a bigger headache than the older bug for some users of Bridge.
Unfortunately, I have been unable to identify a trigger for the condition, which is proving very difficult to recreate reliably, other than it very definitely being introduced with ACR 7.3. Adobe's Steve G told the Bridge forum that the 7.3+ problem had been recreated by Adobe, and was being investigated along with the other (now solved) problem. Has any progress been made? Or is it still a mystery?

Been there, done that:
http://feedback.photoshop.com/photoshop_family/topics/unneccesary_bridge_thumbnail_and_pre view_extraction
They know about it, they just don't know how to recreate it.
Best thing we can do is reliably recreate the fault. My workaround is to only enable Lens Profile Corrections when necessary, as it is a combination of that and some other factor(s) which seems to trigger it.
If you read all the discussions, you'll see that there are two bugs which produce the same symptoms. One introduced in probably ACR 6.1, whichg was fixed in 8.2; and the other was introduced in 7.3 and is ongoing.

DV6-3122us/ after and during Factory restore problems

This is a DV6-3122us 64 bit notebook, 500GB hard drive, 4 GB ram, Windows 7 Home Premium OS. I restored it from the Factory purchased recovery discs, and I had a problem with that, had to do it 3 times kept locking up at 9% on the restore part. It finally went through then said couldn't install, turned it off, and it was installed. This is Windows 7 Home Premium. Now I have lock ups when updating. The HP assistant loads but says it has errors at the very top, and doesn't show the system information at the bottom. The hard drive only shows 80 GB allocated, and 397 unallocated. This is all the original hardware, which has been tested and has passed, memory has passed. Any Help would be greatly appreciated.

1. Right click on the partition ( C:\ ) you want to Extend into the now unallocated partition and click on Extend Volume.
2. Click on Next for the Welcome to the Extend Volume Wizard window
3. Select the amount of space in MB you want to use from the unallocated partition to use to Extend this partition
4. Select all of the available space .
5. Click on Next.
6. Click on Finish in the Completing Extend window
You will now see the Disk Management console with the new extended partition volume ready to be used.
7. Close Computer Management.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud. I get a message on my phone that says " the URL you are requesting is not found on this server". Pics and videos have been deleted too.

I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud. When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play. I get a message on my phone that says " the URL you are requesting is not found on this server". I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted. I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either. Is there someway to get the videos to play on my phone again? Make the photos not as blurry as they are now and to restore the pics and videos that have been lost? I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be. Please help if you can.

I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
Need help too!!

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing.

HT201304 Hi! My My mom bought me an iPhone 5 and I have a problem with my facetime I cant find it! Cant find it in settings and restrictions. She bought this in Bahrain both my iPhone and she ipad mini and she has facetime on her. What should I do?

Hi! My My mom bought me an iPhone 5 and I have a problem with my facetime. I cant find it! Cant find it in settings and restrictions. I remember when she gave me this I see facetime in settings and after a couple of days its gone! She bought this in Bahrain both my iPhone and her iPad Mini. And I'm just wondering why she has facetime and why mine is missing? Please help! My iMessage is perfectly working. I lived in the Philippines

Are you trying to use the phone in Bahrain with a supported carrier there? I suspect not. If you try to use this phone outside of Bahrain, you won't have FaceTime. This is done to prevent folks from simply crossing the border to purchase iPhones in Bahrain...FaceTime is banned in Saudi Arabia & the UAE. Sorry, but you'll only have FaceTime on that phone while using it in Bahrain on a supported carrier's network there.

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make

I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee

try general>settings>reset>reset all settings and start up as an new phone.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Office Report Generation Toolkit 1.0.1 and MS Office 2000 problem

Hello.
I'm tring to make a repot in word using a template..everything works just fine when in development..but when i make the executable the problem arises.
I get error code 7 (Cannot open vi reference) in NewReport.vi.. FYI i'm running the aplication in the same machine i'm developing.
I'm sure everything else is ok..- changed paths to work in executable, template in correct folder...i'm adding the necesary support llb to the executable(Win200), etc - ..i tried reinstaling office and the report generation toolkit but i still have the same problem...
How can i solve this?....
Thanks in advance for all yur help.

Well..that was a very good answer to my question...and it solved my problem. Thank you.
I thought that by adding just the llb as support files would be enogh..but now i see this is not correct..thanks again.

RG registers and PLA registers - Extraction Problem

Similar Messages

Maybe you are looking for