RG54GS print server problem with hp 1200se

I tried to install the print server on win 2000. I followed the instructions in the manual and the installation finished successfully, but when I was trying to print a document nothing happened.
Are there some problem with the printer hp LaserJet 1200 series.
thanks for any hints
markus

what print server are you trying to install? how is your Laserjet 1200 connected to your network? (through a JetDirect card?)

Similar Messages

RG54GS print server problem, different this time

I juts bought a new rg54gs Gateway..
It works fine, except the print server.. When i plug in the usb cable and turn the printer on, the gateway starts to reboot over and over and over until i turn the printer off.. All the lights blink on and off as well.
Is my rg54gs defective?
Has anyone had similar problems?
The printer is Canon S830D.

install the lastest driver of the printer.

Will a D-Link DP-301P+ print server work with an HPLaserJet 5MP

Setup includes the following:
HP LaserJet 5MP (90's model and this thing is a true workhorse!)
Apple Airport Extreme wireless router
Dual 2GHz PowerPC G5 (OSX.4.11)
iMac (OSX.6)
Mac Mini (OSX.6)
I purchased a D-Link DP-301P+ Fast Ethernet Print Server, with the intent to plug it into the printer's parallel port (36 pin) and then plugging an ethernet cable between the server and the wireless router. The only catch is that in order to plug the server into the printer, I will have to dremel out a small portion of the exterior casing of the printer (this is on the back side so it won't be noticeable). Thus my two questions......will this setup even work? Are there any special software settings needed? Thanks for helping out with this.

Hi gwadler,
Thank you for visiting the HP Support Forums. Since this is a duplicate post I'm going to lock this one, please check your other post here for replies:
http://h30434.www3.hp.com/t5/Mac-printing-and-scanning/Will-a-D-Link-DP-301P-print-server-work-with-...
Thanks!
Wendy M - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
Rules of Participation

MSI RG54gs print server BIG PPROBLEM!

hi,
i have faced several hours with my new MSI RG54gs router trying to put my X75 Lexmark working but with no sucess....
Also there a couple of messages here in forum that refect the same problem with others users of this product.
Question:?
- Is there any one that haved used the usb print server port of a RG54GS MSI Router?????
Or there´s any technical contact in MSI that we can get more support, because upgrades to the router and to the router driver see not to work, and,....., that´s it,....
thank´s
José

I just had to right something. Despite what ppl tell u, it is not your printer.
Ijust updated from a d-link 713P to a msi rg54gs. BIG MISTAKE!!!!!!
On the serial print server ob the dlink my printer worked fine, yet i can't get it to work on msi rg54gs. U might say it could be the USB functionality of my printer, well hell no!!!!!! I plugged it staright to my comp and it worked fine. That leaves one thing the gateway.
Now I have seen a lot of threads here for the smae problem. The usb print server is !!!!!!!!!!!!!!!! Whats the deal MSI you could at least release a firmware which rectifies the problem or tell us how to fix the problem. Or even better in future don't sell shitty Faulty products!!!!!!!!!!!!!!!!!!!!!!!!!
Please fix the problem!!!!!! Or risk loosing another customer!

Default printer and problem with printing Crystal Report

Good morning
I have SAP B1 and on the client the default printer is "AMM_4014DN_PCL6_domain-srv FRONTE-RETRO"
Then i have another printer "AMM_4014DN_PS_domain-srv".
Before the default printer were the "AMM_4014DN_PS_domain-srv".
Now the default printer is "AMM_4014DN_PCL6_domain-srv FRONTE-RETRO".
When i push the button "Print" in the menu bar to print for example an invoice, instead of printing on the default printer AMM_4014DN_PCL6_domain-srv FRONTE-RETRO is always printing on then AMM_4014DN_PS_domain-srv.
The report to print was made with Crystal Report 2008 and on the report I also set the correct default printer (AMM_4014DN_PCL6_domain-srv FRONTE-RETRO).
So what's the problem ? Why is continue to print to the older printer ?
So i also delete the older printer (AMM_4014DN_PS_domain-srv) and very strange still printing on the old printer.
I also shut down the client, but no effect.
The operating system of the client is Win Vista and SAP B1 is host on a Win2008 server.
Thanks in advance.
Regards Gabriele

hi,
Check this SAP Notes
[1030589 - Printing preference in document printing|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303130333035383926]
[1609615 - Obtain printer settings from default printing layout|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303136303936313526]
regards,
Fidel

OSX and wireless (third party) print server problems - 'host is busy' again

The setup:
MBP running OSX 10.5.2
Zyxel NSA-220 (with latest firmware) hardwired to a Lynksys wireless router (running Tomato firmware)
Canon PIXMA iP4500 with CUPS+Gutenprint v5.1.7 drivers
I'm trying to set up the NSA as a print server. I can ping the NSA, it shows up fine in finder and I can access the shares on the discs - all wirelessly.
However the Canon setup program can't locate the printer when it tries to align the print heads, so I tried using Print & Fax to set up IP printing, with LPD as protocol and the IP address of the NSA, selecting CUPS drivers rather than the Canon ones.
The issue comes when I try to print and get locked in a 'Network host x.x.x.x is busy' cycle that never ends. I switched from M$ about 12 months and think I'm reasonably computer literate but feel like a mac newbie when problems like this hit. Grateful for any advice.

I helped another postee with a SimpleShare NAS. Reading the user documentation for the device, it showed the Windows connections using smb, ie you simply browse to the device via Network Neighborhood, double-click then select the printer name.
To use smb on the Mac, you select Windows Printing when you add the printer, then browse to the workgroup, then the Zyxel computer name and then the printer share name. Note that if the printer share name has spaces and too many characters, it can cause problems so keep the name short, such as iP4500, and don't have any spaces.
With regards to the current use of LPD as the protocol, this will be the cause of the network busy error as the device probably doesn't support UNIX print services (which btw is what you need to enable on Windows Server if you were to connect the same way).
One final note. The recent Security Update 2008-002 stopped some users from connecting to their current Windows share. One workaround has been to add the user account information into the queue name. This can be done by modifying the view for the Print & Fax Add Printer dialog box, so that the Advanced Printing option appears. Control-click on the icon bar in the Add Printer dialog box and then select Customize then Advanced. Within this selection will be the option to use Windows Printing via SAMBA. This lets you add the printer with all the necessary info, such as the example following.
smb://NSAusername:password@NSA_IPAddress/iP4500
Once you have entered the queue name, you can then browse to the Canon Gutenprint v5.1.7 iP4500 driver.
HTH
PaHu

WWI server problem with report shipping order

Hi everybody,
we have a problem with the WWI server and report shipping orders for Inbound documents (PDF):
after we created an entry in CVD1 and using buttons "Accept" and "Ship immediately" we run the report RCVDEVEN. First time we did it the WWI server started working and ended with error but assigned the correct PDF. After that, the WWI server didt start anyway.
First error message:
The description for Event ID ( 91 ) in Source ( PRD ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: PRD.
Second error message after second attempt:
The description for Event ID ( 95 ) in Source ( PRD ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 09/14/09 17:59:49 Start Function 'WWI_SERVER_INFO'
Initializing parameters
Initializing Tables
Receiving data from client
Sending data to client
Elapsed time : 0.1 sec.
OSS note 1058521 has already been found - but nothing described here is relevant for us: the RFC connection is working, the WWI monitor shows the server up and running.
Any ideas?
Thank you very much in advance and best regards,
Christoph

Hi folks,
fixed the problem myself. There have been some documents with error in the printer queue of the WWI server.
Best regards,
Christoph

System.printing font problem with numbers

I hope I'm putting this question in the correct forum as the issue covers a lot of ground.
I have a C#.net 4 web service on an IIS 7.5 box (call it box 1) that creates XPS documents and stores them in an SQL database.
I have a second C# .net 4.5 (tried .net 4 too and it makes no difference)web service on a separate box (box 2) that pulls documents out the database and sends them to print server queues on separate boxes, say this is box 3, using System.Printing which
is pretty bog standard code except for the XML tray designation code.
This works and the documents are rendered correctly except...
If the font installed on box 1 (IIS 7.5 on server 2008 R2) that is used to create the documents is also installed on box 3 (Times New Roman for example on the print server which is also server 2008 R2) then the documents text comes out
in Times New Roman as you would expect, but any numbers within that text come out in some unknown bold san serif font (e.g abcde
12345). If I put a text character directly in front of a number it renders correctly.(e.g abcde x12345) If the font isn't installed on box 3 then it comes out correctly, numbers and all. If I print the documents from XPS viewer
then they print correctly. The font versions makes no difference. I've tried changing the printer settings (print directly, advanced feature off, client rendering etc) and this makes no difference. The documents are properly formatted right down to each
paragraph now (trying to get rid of this problem) and still it persists.
This issue only appears if both boxes have the same font and you are printing from code.
I've got around the problem by using an equivalent Linux TTF that'll never appear on both servers, but I'd love to know where this problem is. Any takers on answering this?

Hi Ghost...
If you're talking about the Linux TTF, it works just fine, unfortunately it's not an exact match, so in order to get Times New Roman to work as advertised I might have to put some rather "dubious" code in, i.e. hunt down any text that "starts with"
number or find space + 0-9 and then stick an "i" in front in white..that sort of "dubious" thing.
The Time New Roman problem (and other fonts that are on both the IIS 7.5 box where the documents are created and the print servers where they are spooled) is quite baffling.
These are examples of the issue.
2 people went to market...the text comes out in Times, the number comes out in some bold san serif.
I went to the market on 12/12/2012 to see some pigs...shows the same problem
I went .2 the market on .12/12/2012......shows the same problem
I went t2 the market on i12/12/2012...all renders as Times.
In a nutshell, if the char preceeding the number is a-z the numbers are rendered correctly, otherwise they come out as bold san serif.
If I use, say for example Garamond (which isn't on the print server) then the whole everything renders correctly in Garamond. Same thing with all other fonts I tried. if both are on both servers then you get the problem. We have a mix of printers from
various manufacturers hanging off the print servers and the same thing happens on all of them so it's not a printer driver problem.
Everything renders correctly from a print out from the XPS viewer.
The exact architecture is that browser Ajax requests are fired at the doc builder service on an IIS box which builds the documents, puts them in an SQL database as byte arrays and returns success. Depending on the user's location and printer
spec, a new Ajax request is then sent to another IIS box (which is either local or remote to a print server) to print out the documents on location specific printers. The reason for doing it this way was to avoid Kerberos issues that would occur in a double
hop to a remote print server. Note: this is not my domain and I have no control over maintenance, but a Kerberos failure would result in badness, so it's been avoided. Therefore jobs that don't need an exact user, use a domain app pool account and jobs that
do require a specific user go to a service on the print server. Either way the same issue arises.
I though the problem was with my code, but the MS example XPS documents show the same issue.
XPS creation is by GemBox.Document from docx templates and Gembox saw the same issue on their servers when I brought this problem up with them. They put a fix in that partially resolved the matter from their standpoint, but it didn't make any difference
in my architecture.
HTH

DNS Server problems with ASA 5505

Hi guys,
we setup a new ASA 5505 which is mainly used as our VPN gateway. The ASA is configured and controlled by our ISP (and this is where the problem starts )) and they somehow cannot manage to get the VPN settings really working.
So, here is our problem.
our machines(Windows 7) are configured to get the network settings through DHCP (Windows 2012 Server).
Before I connect with AnyConnect to our VPN gateway, the DNS Server setting in the network settings for the adapters(IPv4) are set to 'dynamic'
When I now connect, this setting is changes to a statc entry (which is our DNS server).
When disconnecting, it is not reverted back, which means I have to do this always manually.
What I do not understand is the fact, that the DNS server is set for all the adapters, shouldtn't it be only set to the anyconnect adapter?.
The interesting thing is, that when I connect to a different ASA, this does not happen. The ISP is now saying, that the machines are configured exactly the same and that they cannot reproduce, but I can't believe this.
This issue shows up at every machine which connects to our vpn, so it is not only a single machine which might be misconfigured.
Do you have any idea what might cause this issue?
btw, the second ASA (which works) is from our partner company, so we cannot simply copy the config
THanks in advance
Patrick

Nice to see someone from BT has addressed your issue
I have this exact same problem, seems completely bizarre, I'm pretty sure I had the same problem with the original home hub (i have the latest one now). Can you confirm whether the problem does affect anyone with a bt home hub and not just the one that the dyndns is pointing at? I'll try and confirm by hitting your domain from my home connection.

HP Smart Web Printing feature, problem with IE7 and FireFox3

"HP Smart Web Printing" problem with Internet Explorer 7 and FireFox 3I have a laptop that came with: Windows Vista Home Premium, Internet Explorer 7, FireFox 1.9. Everything worked fine.
Recently I bought a "HP Photosmart C4580 All-in-One" printer that came with a free software "HP Smart Web Printing".
Smart Web Printing worked fine with FireFox 1.9 browser. I liked it very much, because with it, I could print only the portions from the web page that I want, thus saving on inks. It really does more than that.
With IE 7, Smart Web Printing was a disaster. IE 7 stopped working. Every time I closed a web browser window, IE7 would stop working and start all over again. It happened all the time.
On suggestion from Microsoft Windows help desk I "Reset IE Setting". This solved the IE 7 problem , but it also removed the Smart Web Printing feature.
Next, one day I downloaded latest version of FireFox browser "FireFox 3". Once again I lost the Smart Web Printing Feature, because it was not compatible with FireFox 3.
Now here I am with no "Smart Web Printing" feature at all.
Any suggestion how can I get "Smart Web Printing" feature back. I love the feature
Thanks

March 27th 2009 I've just downloaded HP Smart Web Print onto an HP a6500f desktop system running Vista-64. I first installed it as a limited user and I get no icon in the IE7 taskbar. I examined the manage add-ons dialog and it was installed but the toolbar configuration has no control icon for SWP icon.
Then I logged off and logged on as a privileged user and downloaded again and tried to install. This 2nd installation actually REMOVED my first installation.
So I then downloaded for a third time and installed and it finished installing but there was no SWP icon in the tool bar. I examined the Manage Add-Ons dialog and saw one in there on the left side. I transfered the inactive icon to the active side of the dialog and then I immediately had TWO SWP icons in the task bar. (*mumble grumble*). So I removed one and all is OK now as long as I use the IE7 as a privileged user.
If I go back to being a limited user (not an unreasonable thing to do is it?) I don't have an SWP icon. Trying to install SWP application again only cause it to want to remove the existing installation.
I'm not very impressed with this behavior.
Is there anything that can be done to get SWP to work for limited users?

Error Message: "Printer Failure" Problem with print or ink system . . .

Greetings!
I wasn't exactly sure where to post this, but the error message refers to printer or ink system failure so I thought this was a good place. I've been troubleshooting my parents HP OfficeJet Pro 8600 AiO for the last 2 or 3 hours with little success. I've contacted HP tech support but they wanted $200 for the work to be done and neither I nor my parents, who are retired and on a fixed income, have the money to spare.
The tech support people said it was probably a problem with the drivers, so I attempted to reinstall the software, but that didn't help at all. A brief description of the problem might shed some light on this awful situation. Since this morning, my father tried to print something and the printer itself gave the following error message on the front LCD panel on the device itself (ie, not on Windows, but on the printer's display):
"Printer Failure
There is a problem with the printer or ink system. Turn it off, then on. If the problem persists, contact HP."
Obviously my first course of action was to follow the directions. I turned it off, unplugged the cord, waited approx. 30 seconds, replugged it in and turned it back on. Nothing changed. I've also tried removing and replacing the Ink cartridges, checking the tray for a paper jam or shortage and performing a rain dance in the hopes of attracting the gods' attention xP. In short, I'm at my wits end and don't know where to go from here.
I'm unable to access the device's LCD display control panel, which controls the printer, as the error message cannot be closed. I've tried restarting the PC as well, and a lot of other basic deductive troubleshooting procedures to no avail (forgive my overuse of cliches).
Any help would be appreciated. Thank you very much in advance. I wish you all a great day, and may the god of printing protect you from the same situation. I can assure you it's most unpleasant.
Regards, Sean (frosztbyte)
P.S. I'm not sure what other information might be needed in order to help me, but ask and you shall receive any I can find.

Hi frosztbyte,
I understand your parents have an OfficeJet Pro 8600 that is saying it has a printer failure, that you have thus far not been able to clear, despite your best effort and a rain dance (at least I know who to blame for the rain now ). I would be happy to help you as best I can!
The first thing I'd suggest you do is plug the printer directly to a wall outlet if it isn't already plugged to one, just to ensure the printer is getting all the power it needs to function properly. If that doesn't seem to change anything though, please have a look through this A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o... document (it was steps for the same error without an error code as well) and hopefully it can help resolve the issue.
If the issue persists after trying the wall outlet and that document I would advise you try call HP again. I believe the number you called previously may have not have been HP, but another company. If you're in North America just call 1-800-474-6836, and if you're anywhere else have a look at this Contact HP Worldwide page to see what number to call for your area.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Printing layout problem with Lightroom CC 2015 Release

Hello,
I am working with the following configuration :
MacBook Pro (15-inch, Mid 2010)
OS X Yosemite Version 10.10.3
Adobe Photoshop Lightroom CC 2015 Release
EPSON Stylus Pro 3880
I tried to print two images on a Super A3 paper sheet with an EPSON Stylus Pro 3880 directly from Lightroom and here is an example of what I expected (I resized and added a black border for better visibility on the forum):
This is the preview I have in the printing module of Lightroom and this is also what I have when I print to a JPEG file with Lightroom.
Sadly, after I launched the printing job, this is what came out of the printer:
As we can see, the layout of the two pictures has been shifted toward the top of the paper sheet (cropping the top of the first image in the process) and about 30% of the right part of the layout has not been printed.
Do you have any idea of what I am doing wrong here?
For your information, I do not print very often so I am not 100% sure that I set everything correctly. However, I have been successfully printing in the past and it was with the same MacBook Pro on the same EPSON Stylus Pro 3880 printer but it was with OS X Yosemite Version 10.10.1 and with Lightroom 5.x (I cannot remember exactly which version).
Moreover, because my print was urgent, I retried with a Windows machine running Lightroom 4.x with the same printer and it was a success. So I doubt that my initial settings on my MacBook Pro were wrong although I am not 100% sure.

I am in France and I found out that EPSON is providing at least two different files for its v9.33 driver that relate to the Stylus Pro 3880 with OSX:
epson16738.dmg: US version (https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=141552&prodoid =63085147&infoType=Downloads&d…)
epson379436eu.dmg: French version (Support et téléchargements - Epson Stylus Pro 3880 - Epson)
and I realize that I was using the US driver which.
After few minutes of refection, I realized that the 3880 driver that I installed on my MacBook pro was the only piece that was present when my prints failed and absent when my prints succeeded. So I though it had found out the cause of my problems until I tried with the french driver (epson379436eu.dmg)...
In the meantime Adobe has release of new version of lightroom so let me recap my new configuration:
MacBook Pro (15-inch, Mid 2010)
OS X Yosemite Version 10.10.3
Adobe Photoshop Lightroom CC 2015.0.1 [ 1018573 ] (info available in Help menu > System info > Lightroom version)
EPSON Stylus Pro 3880
Epson driver v9.33 epson379436eu.dmg
... and the result of my test is ... nothing at all! Lightroom sends the the print job to the printer but nothing comes out of it.
However, when I printed to a file from lightroom and then tried to print this file with OS X Preview on the Epson 3880, it worked perfectly.
It also worked when I printed from Photoshop CC (2014.2.2).
It also worked when I printed from Lightroom but with a different printed and driver (Canon MF8580Cdw).
Therefore, among the five elements of my configuration cited above, there is none for which the printing job is always failing. It is hard to find out what is the faulty piece of software!

Printing quality problem with Photosmart D110

The printing quality is very bad after we changed the catridge. The printer keeps saying that there is catridge jam. But after I followed the steps by the printer, the problem is still unsolved. What is the possible reason and how could I solve it?

Hello RussellYang.
Welcome to the HP Forums! I understand your concerns with your Photosmart D110A. Does this issue occur from multiple program(s) or just one program?
Please follow this entire HP document on Continuous Pages of Strange or Garbled Characters Print in Windows.
What is your operating system on your computer? Click here to find out: Windows.
Have you tried using a different USB cord, to verify if the issue still occurs?
Please inform me your troubleshooting steps.
I worked on behalf of HP.

Trying to print says " problem with adobe acrobat/reader exit try again help?

I keep trying to print a document, which has been working up until today, it has to be in PDF format to print, but when I push print a box comes on the screen and it says "there is a problem with adobe acrobat/reader, please exit adobe acrobat/reader and try again. What do I do? Thank you

Hi tanjam38435898,
Please refer this thread Links as it seems relevant to your query : Re: Error Code 0:104
hope that helps
Regards,
Rahul

Has anyone got a belkin f1up0002uk print server working with OS X 10.4.10

I've got an HP all-in-one printer and want to share it wirelessly with my Macs and PCs. I've got a netgear wireless router/access point. I've just bought a belkin print server (model # f1up0002uk) but this appears to be windows only compatible.
Before opening the belkin box I did a search on the internet - I couldn't find anything specific on this model of router working with a Mac.... however, from my research I get the feeling it should be possible to get it working on a Mac through IP printing.
Has anyone used this print server with a Mac and got it working? Failing that, any pointers would be greatly appreciated.
Thanks
VP

Greg,
Thanks for your response. It turns out that my original fears were unfounded.
Installing the print server was very straight foward and after getting it working on one of my XP boxes I was able to install it on my MacBook using *Print & Fax* ---> *IP Printer* ---> Protocol ---> _Line Printer Daemon - LPD_ ---> Address ---> _Belkin Print Server IP Address_.
I checked to see if OS X provided a driver for my all-in-one printer (HP PSC 2175) and the following page http://docs.info.apple.com/article.html?artnum=303057 said there was one but it wasn't available in my printer pull down list. Further research through HP revealed that other drivers could be used and fortunately there were Gimp-Print 5.0.0 beta 2's available so I used the HP 500C driver.
I also had to reserve the IP address of the print server on my wireless (Netgear) router but I left DHCP on for the rest of my devices.
The end result is that the Belkin Print Server now works across my mixed Mac and PC network. Unfortunately I'm not able to use the scanner through my Macs but this isn't an issue as my priority was to share printing. I should also mention that the Belkin manual also includes instructions for Unix/Linux and OS X, although this is not stated on the box.
VP.

RG54GS print server problem with hp 1200se

Similar Messages

Maybe you are looking for