RH Linux VIP configuration not working for Oracle 10g RAC installation

Hi all,
I am trying to setup my test cluster on Oracle 10gR2 and Red Hat Linux 4. I have the public and private networks working fine and setup. However, after I setup the two VIP addresses, I cannot even ping these two virtual IPs from Linux. CRS install fails during initial run because it cannot communicate with the two VIP IP addresses. Can anyone help me out as to how to go about fixing the two VIPs so that Linux can ping them and CRS will install?
Thanks

It sounds like you configured your VIP on Linux in advance, before installing Oracle.
You are not supposed to do that.
Decide on an IP that the VIP will use with your network manager, but don't configure it in Linux. So before you start the clusterware install, ifconfig should not show your VIP.
CRS does not need VIP when you install the clusterware, only the interconnect address.
VIP is configured using a utility called VIPCA. If Clusterware installation fails and you think it was caused by VIP issues, try running VIPCA manually and let us know what were the results.

Similar Messages

  • Declarative transaction not working  for oracle 10g as.

    Hi Friends,
    While migrating from sun app server to oracle 10g as, i have problem in declarative transactions.
    I created stateless and stateful beans with declarative transactions. Transactions were working fine till they were in sun app server environment, but they fail in oracle 10g as environment.
    I build the ear through sun IDE and deployed the ear on oracle 10g as. Things worked fine till transactions come onto picture.Declarative transaction get failed in case of oracle 10g as.
    Please if you have faced such problem or have any way to solve this problem, Pls revert back.
    rgds,
    m_khanduri

    sb92075 thank you for reply. Please see the command outputs.
    $ hostname
    LONDAN
    $ id
    uid=503(oaprod) gid=5002(dba) groups=5002(dba)
    $ uname -a
    Linux LONDAN 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
    $ ps -ef | grep -i pmon | grep -v grep
    oaprod    3810     1  0 May11 ?        00:02:24 ora_pmon_OID
    jgarry thank u also. please see the response.
    $ ls -rl $ORACLE_HOME/dbs
    total 2848
    -rw-rw---- 1 oaprod dba    3584 May  8 14:33 spfileOID.ora
    -rw-r----- 1 oaprod dba 2867200 Sep 10 10:17 snapcf_OID.f
    -rwSr----- 1 oaprod dba    1536 May  5 06:17 orapwOID
    -rw-rw---- 1 oaprod dba      24 May 11 17:24 lkOID
    -rw------- 1 oaprod dba    8385 May  5 05:18 init.ora
    -rw------- 1 oaprod dba   12920 May  5 05:18 initdw.ora
    -rw-rw---- 1 oaprod dba    1544 May 11 17:24 hc_OID.dat
    ok. previously I set TNS_ADMIN. Now I set TWO_TASK, while connecting now am getting different error "insufficient privilege". Please check following.
    $ export TWO_TASK=OID
    $sqlplus / as sysdba
    SQL*Plus: Release 10.1.0.5.0 - Production on Wed Sep 11 05:22:28 2013
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    ERROR:
    ORA-01031: insufficient privileges
    But, now while connecting with "sys", I don't need to supply "@OID" it's connecting directly with "sqlplus sys as sysdba" command.

  • What will you do if any SQL is not working.in oracle 10g...apps 11.5.10.2

    What will you do if any SQL is not working. in oracle 10g....apps 11.5.10.2

    928714 wrote:
    yes sir.If you help me in answering my questions i wll be very thankful to you sir.
    tnx,I haven't a clue.
    As you have been advised in many of your posts, go study the documentation for whichever specific topic you are interested in.
    For me to answer your questions, I would need to go get that documentation.
    Then I would need to read that documentation.
    Then I would need to write a forum post that interprets what I think I learned from that documentation.
    It is so very much faster if YOU go do that instead of posting to a forum and expecting others to do it. You will remember what you study for a lot longer time if you teach yourself.

  • Table_From_Block Build-in Package is not working in Oracle 10G

    Hi
    Table_From_Block Build-in Package is not working in Oracle 10G
    Kindly advice..

    user648759 wrote:
    Hi
    Table_From_Block Build-in Package is not working in Oracle 10G
    Kindly advice..Provide a little more information. Forms version OS version, more information about your problem and question.
    --and explain what on earth Table_From_Block* mean's--
    Tony
    PS: TABLE_FORM_BLOCK is a built-in for internal use, usually auto generated by forms. For a moment I didn't get what that meant, need more coffee.
    Edited by: Tony Garabedian on Aug 29, 2008 12:39 PM

  • Select * from tab is not working in oracle 10g

    select * from tab is not working in oracle 10g. But at the same time,
    select * from <<table>> is working.
    Please advise me.

    This works for me in 10.2.0.2
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL> select * from tab;
    TNAME                          TABTYPE            CLUSTERID
    LOAN_DETAIL                    TABLE
    PLAN_TABLE                     TABLE
    ...

  • DO I need SFRAC for Oracle 10g RAC  on Sun Solaris

    My platform is SUN Solaris 10 64 bit on v490 server. On the backend side, we are using EMC CX500 storage. We will use Veritas File system and Veritas CFS.
    I would like to ask, Do I must need SFRAC to configure Oracle 10g RAC or Can I just use only Oracle CRS. I do not want to use ASM.
    Please advise
    Thanks,
    Sam..

    The VCFS usually requires a Veritas Cluster, thus you would have to use the product combination that is bundled as SFRAC as mentioned before. Metalink in addition says:
    10      10gR2 64-bit      Veritas Storage Foundation for Oracle RAC      5.0      Certified
    There is one exception to this rule: Linux.
    Veritas and Oracle support a standalone version of the Veritas Cluster Files System (and only this component) on Linux. This does not hold true for Solaris.
    Concluding, if you want to use the VCFS you would need to get a VCS, which then basically means using SFRAC.
    However, in this case, as mentioned before, you would not need ASM.

  • Oracle 10g RAC installation on HP-UX 11.31 for SAP ERP 6.04

    Dear experts,
    We are trying to install SAP ERP 6.0 EHP4 with Oracle 10g RAC on HP-UX 11.31. Please note that, We are using VERITAS cluster filesystem (CFS) for this purpose and not HP-UX ServiceGuard ClusterFileSystem.
    *As per SAP procedure, we have installaed plain plain SAP system with single instance Oracle (ref: Configuration of SAP NetWeaver for Oracle Database 10gRAC guide). Now we are first trying to install Oracle Clusterware (CRS) and then we will install Oracle RAC software. Is this procedure right?*
    Which file (and its path) we have to use for CRS installation and its patch? Is it runInstaller under /oracle/stage/102_64/clusterware? With this file we can install CRS 10.2.0.1. Similarly for Oracle RAC, which files we are supposed to use, i.e for installation and patch upgrade?
    Also can we use clusterware package available from Oracle directly in the SAP environment?
    We tried to install CRS with runInstaller while running Configuration Assistant after root.sh script.
    The following commands are failing in Configuration Assistant:
    /oracle/CRS/102_64/bin/racgons add_config erpprdd1:4948 erpprdd2:4948
    /oracle/CRS/102_64/bin/oifcfg setif -global  lan1/20.20.20.0:cluster_interconnect lan0/192.168.3.0:public
    /oracle/CRS/102_64/bin/cluvfy stage -post crsinst -n erpprdd1,erpprdd2
    1st command does not give any output if run manually.
    2nd commands o/p: PRIF-12: failed to initialize cluster support services
    3rd commands fails in every check
    Please suggest the solution and expecting answers to the above mentioned questions.
    Thanks & Regards,
    Tejas

    >
    Charles Yu wrote:
    > Q1:  Oracle RAC with 9.2.x on HP-UX?
    > A:   For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are  optional components of MC/SG  for supporting Oracle RAC and SAP application.  I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
    > Charles
    Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
    >
    Charles Yu wrote:
    > Q2: Any reason why you don't use a supported database version?
    > A:   Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk,  top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
    > Charles
    You can go for combined os migration and db release upgrade also at a stretch with the same downtime.

  • Shared Storage allocation for Oracle 10g RAC

    Hi,
    I am about to implement a Two Node Oracle 10g RAC on Windows 2008 (32-Bit) servers. We are going to use EVA4400 storeage and we have 600 GB for Oracle RAC and database.
    I intend to follow the steps given in RACGuides_Rac10gR2OnWindows.pdf mentioned in Note 811271.1 (RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows)).
    I would like to know how should I allocated the storage for OCR,Vote, Database and Flash Recovery Area. Meaning how many LUNs and of what size to be created and presented to both the servers. To start with I need to create a 25 GB database. We will be using Raw Device for OCR and Vote and ASM for Database and Flash Recovery Area.
    Please advice.
    Thanks,
    Thiru

    I am about to implement a Two Node Oracle 10g RAC on Windows 2008 (32-Bit) servers. Oracle 10g on Windows 2008 is not supported. Anyway installing a cluster as of today i would use a 64-bit operating system together with a 64-bit database. Everything else is not state-of-the-art anymore.
    As of today i would go with 11g Release 1 (11.1.0.7.0) plus latest patches for Clusterware and ASM. Because you are using Windows 2008 you must use 11g Release 1 for the database as well. Bear in mind that Windows 2008 R2 is at this point in time not supported for 11g R1 or 11g R2 either.
    I would like to know how should I allocated the storage for OCR,Vote, Database and Flash Recovery Area. Meaning how many LUNs and of what size to be created and presented to both the servers. This is said in the installation documents. Rule of thumb: At least three LUNs of 2 GB for OCR and three LUNs of 2 GB for Voting disk.
    To start with I need to create a 25 GB database. We will be using Raw Device for OCR and Vote and ASM for Database and Flash Recovery Area.According to Oracles recommendations: Two disk groups: one for database files, the other for the flashback area.
    But your setup may be different (more disk groups,....)
    Ronny Egner
    My blog: http://ronnyegner.wordpress.com

  • Shared Disk Subsystem for Oracle 10g RAC

    I am investigating the feasibility of clustering two 220Rs together in an Oracle 10g RAC configuration. Can I use a D1000 disk array for the shared storage between the two nodes? Can you briefly describe how to do it or point me to documentation on how to do it?

    hi dstmark,
    can you kindly share some information with me? i am thinking of building up a small lab at home using A1000 to build up an Oracle RAC, as a1000 have 2 scsi port and have a build in controller.
    but i am unsure about the detail software requirement, as google return some conflict information.
    is SUN cluster would be enough? do i need to get something like Veritas Cluster? which may require a license key....
    thanks for sharing information.

  • Oracle 10g RAC installation on linux server.

    HI,
    Can anybody help me that to give some answers of my question's ?
    can i install oracle 10g RAC on a single hdd linux server which is installed on an ordinary intel processor based machine.
    if i can then plz tell me this how can i do this.
    i am new in linux server just wanted to learn that how to install oracle 10g RAC.
    thanks & Regards to all of my seniors..

    The only option you have to install RAC on 1 machine is to use Oracle VM, VMWare or Linux Virtualization feature (Linux Xen).

  • Enable autoarchiving for Oracle 10g RAC db

    Hello
    What are the steps to enable autoarchiving for Oracle 10g cluster database?
    It is currentrly in noarchivelog mode.
    Thank you,
    Yelena

    Hi.
    I think that this has been improved in 10g, so that we can do an exclusive mount on any database in a RAC without setting cluster_database to false. Also the parameter log_archive_start has been depreciated so the steps is simply (assuming that you by default wants to use db_recovery_file_dest to store archived redo logs)
    1) Shutdown immediate (instance 1)
    2) Startup mount
    3) Alter database archivelog
    4) Alter database open
    Repeat this sequence for all nodes in the RAC.
    And the best is to leave the log_archive_format by it's default value, to ensure that the incarnation of the database is represented in the archive log name.
    (On 10g, backupsets and archivelogs are usable beyond different reincarnation of a database, so there is a good change that S% or s% will repeat itself after an open resetlogs).
    Hopes this might help you.
    Good Luck
    Rgds
    Kjell Ove

  • Support for Oracle 10g RAC?

    Will Oracle 10g RAC be supported in 8.1SP4? If so, when is it scheduled for release?
    In the mean time, has anyone used 10g RAC and can share their experience?
    Thanks,
    Guy

    First, tell us your current skill set - especially as it relates to Oracle database. Then we can give you the right advice.

  • Oracle 10g rac installation on IBM power server

    Dear Gurus,
    I am installing Oracle 10g RAC on IBM power server but while running CRS getting the following errors. Please help to resolve this issue.
    OUTPUT from Installation log:
    INFO: Start output from spawned process:
    INFO: INFO:
    INFO: /oracle/app/oracle/product/crs/bin/genclntsh
    INFO: /usr/bin/ld: cannot find -lxl
    INFO: collect2: ld returned 1 exit status
    INFO: genclntsh: Failed to link libclntsh.so.10.1
    INFO: make:
    INFO: *** [client_sharedlib] Error 1
    INFO: End output from spawned process.
    INFO: INFO: Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/app/oracle/product/crs/network/lib/ins_net_client.mk'. See '/oracle/app/oracle/oraInventory/logs/installActions2011-12-26_04-40-48PM.log' for details.
    Exception Severity: 1
    INFO: Exception handling set to prompt user with options to Retry Ignore
    SYSTEM:
    IBM power server
    Linux 5.3
    I have already tried changing ORACLE_HOME,CRS_HOME,LD_LIBRARY_PATH but nothing worked.
    Regards,
    Prajash

    Those errors remind me on errors I encountered when I was trying to do installation that was not certified,
    so try to check if installation you are doing is actually supported.
    In the meantime , visit metalink and read document [ID 460969.1] , */usr/bin/ld: Cannot Find -lxml10, Genclntsh: Failed To Link Libclntsh.so.10.1*

  • Sqlplus is not working after oracle 10g client installatio on linux server

    Him
    jsut now i installed oracle 10.2.0.1 client version in one my linux server. after successfully installation sqlplus is not working . could you please chekc and let me know what is the problem? below are my .profile details.
    # Set up the shell variables:
    EDITOR=vi
    export EDITOR
    ### Set the umask
    umask 022
    ### Set ulimit
    #ulimit -u 16384
    #ulimit -n 65536
    ### Set Oracle Environment
    export ORACLE_BASE=/u01/app/oracle
    export ORACLE_HOME=/u01/app/oracle/product/10.2.0/client_1
    export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$PATH
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/ctx/lib
    export LIB_PATH=$ORACLE_HOME/lib
    export ORATAB=/etc/oratab
    export NLS_LANG=american_america.we8iso8859p1
    export THREADS_FLAG=native
    echo ' '
    echo 'Oracle 10G environment has been setup'
    echo 'Export the ORACLE_SID to target database before connecting'
    echo ' '

    841731 wrote:
    Him
    jsut now i installed oracle 10.2.0.1 client version in one my linux server. after successfully installation sqlplus is not working . could you please chekc and let me know what is the problem? below are my .profile details.
    # Set up the shell variables:
    EDITOR=vi
    export EDITOR
    ### Set the umask
    umask 022
    ### Set ulimit
    #ulimit -u 16384
    #ulimit -n 65536
    ### Set Oracle Environment
    export ORACLE_BASE=/u01/app/oracle
    export ORACLE_HOME=/u01/app/oracle/product/10.2.0/client_1
    export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$PATH
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/ctx/lib
    export LIB_PATH=$ORACLE_HOME/lib
    export ORATAB=/etc/oratab
    export NLS_LANG=american_america.we8iso8859p1
    export THREADS_FLAG=native
    echo ' '
    echo 'Oracle 10G environment has been setup'
    echo 'Export the ORACLE_SID to target database before connecting'
    echo ' '" sqlplus is not working" is not an actionable error message. Unfortunately, you didn't show us what happens when you try to execute sqlplus.
    Essentially, what you've done is the equivalent of 'here's a picture of my garage. Why won't my car start?'

  • Configuring udev rules for Oracle 10g R2 Rac on OEL 5.5 U4 with Qnap

    I'm trying to setup a 10g RAC Cluster following the guide by Jeff Hunter on http://www.idevelopment.info/
    I have to admit, im no Linux admin, and have searched round the net for help with the following Issue.
    I'm trying to set my iSCSI targets to have persistent mappings using udev rules
    This is what I have done so far
    [root@racnode1 Server]# iscsiadm -m discovery -t sendtargets -p nas-priv | grep 192.168.2.196
    192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d
    192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d
    192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d
    192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d
    192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d
    192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d
    192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d
    192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d
    192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d
    -- Manually Log into iSCSI Targets
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d -p 192.168.2.196 -l
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d -p 192.168.2.196 -l
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d -p 192.168.2.196 -l
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d -p 192.168.2.196 -l
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d -p 192.168.2.196 -l
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d -p 192.168.2.196 -l
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d -p 192.168.2.196 -l
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d -p 192.168.2.196 -l
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d -p 192.168.2.196 -l
    -- Make iSCSI Targets Automatically Login
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
    iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
    -- Create Persistent Local SCSI Device Names
    - Identify Mappings
    [root@racnode1 ~]# (cd /dev/disk/by-path; ls -l qnap | awk '{FS=" "; print $9 " " $10 " " $11}')
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdg
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdf
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdi
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sdd
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sdj
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdc
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdb
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sde
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdh
    - Create Rules File
    cat >> /etc/udev/rules.d/55-openiscsi.rules <<EOF
    # /etc/udev/rules.d/55-openiscsi.rules
    KERNEL=="sd*", BUS=="scsi", PROGRAM="/etc/udev/scripts/iscsidev.sh %b",SYMLINK+="iscsi/%c/part%n"
    EOF
    - Create Shell Script
    mkdir -p /etc/udev/scripts
    vi /etc/udev/scripts/iscsidev.sh
    #!/bin/sh
    # FILE: /etc/udev/scripts/iscsidev.sh
    BUS=${1}
    HOST=${BUS%%:*}
    [ -e /sys/class/iscsi_host ] || exit 1
    file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
    target_name=$(cat ${file})
    # This is not an open-scsi drive
    if [ -z "${target_name}" ]; then
    exit 1
    fi
    # Check if QNAP drive
    check_qnap_target_name=${target_name%%:*}
    if [ $check_qnap_target_name = "iqn.2004-04.com.qnap" ]; then
    target_name=`echo "${target_name%.*}"`
    fi
    echo "${target_name##*.}"
    chmod 755 /etc/udev/scripts/iscsidev.sh
    service iscsi stop
    service iscsi start
    [root@racnode1 ~]# ls /dev/iscsi/*
    ls: /dev/iscsi/*: No such file or directory
    1.) For some reason I cannot get the mappings to work correctly, I have rebooted the server and tried a number of different changes in the rules script. But for the life of me I cannot get it work.
    I noticed when I rebooted the server that it failed to execute the iscsidev. When I manually run the shell script with a parameter it produces output
    Can anyone help me to get this up and running?
    2.) My QNAP Nas doesnt seem to publish iSCSI targets to only one NIC. I think this is down to the firmware/feature not being available. When I discover targets I get the following
    [root@racnode1 ~]# (cd /dev/disk/by-path; ls -l *qnap* | awk '{FS=" "; print $9 " " $10 " " $11}')
    ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdh
    ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdm
    ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdn
    ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sde
    ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sdr
    ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdd
    ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdb
    ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sdk
    ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdp
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdi
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdg
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdo
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sdj
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sds
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdf
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdc
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sdl
    ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdq
    It shows the same targets on both NIC's, I only need them on the private ip 192.168.2.196
    Edited by: user1728822 on 07-May-2011 15:53
    Edited by: user1728822 on 07-May-2011 16:08

    Hi,
    I'm facing the same issue.. If your issue is fixed..could you please let me know?
    I'm trying to configure 11g RAC with OPenfiler and got stuck here.
    Regards,
    Kumar

Maybe you are looking for

  • HT1459 ipod touch 2nd generation not connecting with itunes when plugged in

    ipod touch 2nd generation is not recognized when plugged into computer, by itunes or computer thank you

  • Sending Logs to Multiple Syslog Servers

    Hi Team , is it doable to send log messages recorded on various cisco devices to multiple syslog servers by discriminating the severity level ?, for example I want to send all the critical and alerts logs to x.x.x.x server, but for other severities, 

  • J2ee startup (errors) after SAP kernel upgrade

    Guys, Not sure if anyone has seen this before, I have read the forums, and seen simular, but not exactly the same.... When trying to start the j2ee engine (add-in installation) the dev_jcontrol file contains the following error; [Thr 01] JStartupIChe

  • Display selected items in dynamic list box

    I need to display the selected items in a dynamic list box - this worked great - but now client wants multiple selected. I do have the items comma delimited in single field (but I can change that if I need to) - so how do I make those items display a

  • Set cursor as clock in Xorg

    I'm using openbox as my wm without a panel, only conky on the desktop so when I want to check my battery usage or the time I have to either move all my windows or change to another desktop to look at conky. Is there any way for me to have my cursor c