RH11 gives a duplicate file error message converting from RH9

My project has an empty file which cannot be deleted but was ignored by RH9.  In converting to RH11 I get the following message: "Error - node */Views/<folder name>/<folder name>/SBLCRVAL.htm already exists."  However, there is no other file by that name in the project.  There is a similar one which I renamed and everything works fine in RH9, but I cannot convert to RH11.

Hi there
I think I'd save a copy of the offending file in a safe place, then delete it from the project. After the upgrade completes, then import it back into the project.
Cheers... Rick

Similar Messages

  • I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.

    I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.

    Hi la recruiter,
    There are a few types of files that Acrobat can't convert--and PDF files with security applied is one on them. I'm happy to cancel your subscription, if you decide that it's not going to work out for you. Please confirm that you'd like me to proceed with the cancelation, and I'll take care of it right away.
    Best,
    Sara

  • I do not have Microsoft office and to know if I can still open docx files - error message reads corrupt files.  Is there a reliable converter out there?

    I do not have Microsoft office and want to know if I can still open docx files - error message reads corrupt files.  Is there a reliable converter out there?  I am a new mac user.

    Install the free LibreOffice and save a bundle not having to pay MS. http://www.libreoffice.org/

  • I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import

    I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import menu and nothing has changed.  I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card.  Any thoughts?

    The error message probably said "unsupported or damaged"
    The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

  • Couldn't Save File - Error Message

    Recently after adding a few more pages and updating some existing pages on my site, I have been met with an error saying I cannot save my website using the save function of iWeb, I receive the "Couldn't Save File" error message, however it doesn't tell me what file can't be saved or what file might be missing. I am running verision 1.1.2. Thanks for any help anyone can provide.

    Dear DOHCVTEC187:
    I had that same error. iWeb would open with a "can't open file :unamed" error, and also would give me a "can't save" error. I searched on the discussions, and found a few things that might help.
    First, save/backup your Domain. That is where iWeb saves all that cool web info. It should be located in:
    <user>/Library/Application Support/iWeb.
    I try to make a back up this when ever I make big changes anyways. Alway a good idea. Burn it to Disk, put it on another HD. Etc. Then delete the original, leaving the folder empty.
    Second:
    Trash iWeb preferences, located:
    <user>/Library/Preferences/com.apple.iWeb.plist
    Now, use Disk utility to repair permissions. I do this as a helpful step.
    Then restart.
    After restarting, open up iWeb. Hopefully it opens with out the error, since we are starting from "scratch". It should ask for you to create a new page/ new site. ie, remaking a "domain". Make a singe page. Save and then quit iWeb. It should run smoothly.
    Now, go find that "new" domain you just made, and replace it with your old one.
    That should help.
    Also, one thing that I found when this error happened to me was that I had built links to documents , such as PDF for people to download. Thus the error "couldn't open, unnamed" etc. It was because those links were "broken", so I had to find each link that I pointed to a PDF, and double check that it was still working and pointed to the correct file. Could be a pain in the but if you have alot of PDF's, etc, but it was worth it.
    Hope this helps!
    15" PB g5   Mac OS X (10.4.9)  

  • Unrecognised File error message

    I have a clip shot on a sony AVHCD camcorder. It was shot using a h.264 codec and I want to edit in FCE.
    I've converted the clip using quicktime pro 7 to DV-PAL.
    The clip plays fine on my imac but when i attempt to import to final cut i get an "unrecognised file" error message and the clip isnt imported.
    Any ideas whats causing this?

    OK thats making sense.
    So the clip was imported from the camera to iMovie where it was initially edited into a final file. That file was then shared to AppleTV.
    Some years later I decided to make changes to that clip and it was the finished iMovie project in .m4v that was being converted in QT7 for use in FCE.
    When I now look at the interface in QT7, my audio options are listed as:
    Linear PCM
    AAC
    Apple Lossless
    MPEG-4 AAC Enhanced
    MPEG-4 AAC Low Delay
    MPEG-4 HE AAC
    MPEG-4 HE AAC V2
    So I assume either Linear PCM or Apple Lossless comply to your suggestion?

  • My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

    My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

    DonM. wrote:
    Hi
    Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
    Cheers. Don
    No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac  or an Apple refurbished iMac to save money.

  • "Unable to Check Out File Error" Message

    I'm new to using Adobe products, so forgive me if this is a dumb question! My graphic designer sent me a INDD file to edit the text in and when I try to open it in both InDesign and InCopy, I receive an "Unable to Check Out this File" error message. I just downloaded InDesign CC and InCopy CC (the free trial versions). She said that all settings on her end should allow me to view it. Any help is much appreciated!
    Thank you!

    I've just experienced the same error message in CS4. I got rid of it by going to the Links panel, selecting all the links to Incopy, and Unlinking.

  • Cannot locate original music file error message???

    cannot locate original music file error message ??? i transferred to a new laptop then some of my music collection seems to get this message .

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    This is a user to user forum.  Apple isn't here and won't answer you.  You need to contact Apple directly.  You can use the Contact button at the bottom of the screen.

  • I have connected my time capsule to motorola SG6580 modem via ethernet.  I have a wireless network on the motorola and a wireless network from the time capsule.  I get duplicate IPs error messages sometimes. How do I fix?

    I have connected my time capsule to motorola SG6580 modem via ethernet.  I have a wireless network on the motorola and a wireless network from the time capsule.  I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs.  I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device.  I have been writing down all the devices and the IPs they have been using.  It happens more with PCs than Macs, ipads or iPhones.

    If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
    Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
    On your Mac, open AirPort Utility
    Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click the Network tab at the top of the next window
    Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
    Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
    If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

  • What can I do to fix an old Power Mac G4 that gives an I/O error message when trying to access Entourage?

    What can I do to fix an ld Power Mac G4 that gives an I/O error message when trying to access Entourage?

    You mean when you try to just start it?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Can't open file , error message 1310 & 2203

    can't open file , error message 1310 & 2203

    reproduce is easy. anytime i click to open an attachment or a pdf file.
    it won't open.  comes up with notice that adobe acrobat has stopped
    working and the program will close.  I can go to READER AND OPEN THE
    FILE BUT NOT FROM ACROBAT X PRO.   RATHER SILLY.
    ERROR MESSAGES ATTACHED
    THANKS FOR THE ASSIST
    Dan Valentine, GRI, e-PRO, MA min
    Broker-Owner
    Valentine Sales & Management
    "Building & Maintaining Rental Portfolios"
    "One-Stop-Shop: AcquireRehabLeaseManagementStrategic Disposition"
    www.ValentineTeam.com
    www.ValentinePropertyManagement.com
    www.InvestAZRentals.com
    12031 N. Cave Creek Rd.
    Phoenix, AZ 85020
    Cell-Text 602-377-0621
    Office- 602-866-0150
    Fax-602-926-8260
    [email protected]

  • I can't sync my iPad to the iTunes it's give me an unknown error  message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

    I can't sync my iPad to the iTunes it's give me an unknown error  message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

    Unknown Error containing "0xE" when restoring
    To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
    From Here  >  http://support.apple.com/kb/TS3694

  • HT2589 ibooks still gives me the following error message "This Apple ID cannot be used for the iTunes Store."

    I've done all of the above suggested sign in methods, and yet ibooks gives me the following error message "This Apple ID cannot be used for the iTunes Store."

    Found this in the forums here, it works.
    "OK...I think I have found a solution.  In settings, select tunes &amp; app store.  click on Apple ID> View Apple ID>Payment Information. It appears it is not saving or requiring payment information to be updated. This worked for me."
    Thanks

Maybe you are looking for