Rich text default values not appearing in content entry template

Hello all,
Sorry for the repost, but no one seems to have an answer for me in the other forum and I thought I might be able to reach more people here.
I have created a base text item and would like to include default values in some of the attributes. The problem is the default value I set in the rich text field is not appearing when I try to create an instance of my item type.
Is this a bug, or am I not doing something right? All of my other attributes show their default values.
Thanks in advance,
Jim

bug 3221058
Patch 4021971 for 9.0.4.1
(only available on http://metalink.oracle.com site)
Patrick.

Similar Messages

Default values not appearing

I've been trying to create default values for a column during and Insert.
I've tried both setting the Default value in the Attribute tab of the entity and doing it within the create method, but neither of them populates my textfield.
Any ideas on what would keep it from taking on the default value?
thanks

Hi Harrison
You add a default value to the attribute in the Attribute Settings tab of the Entity. When you use the tester to run the application module and bring up a blank record using the Insert a New Record icon, you shoud see the default value in the item field.
Is this happening in your case?
Regards
Susan

The text highlight icon in hotmail rich text toolbar does not display in firefox but does in IE

if I open hotmail using firefox then I start composing an email message in hotmail the icon to highlight text does not appear in the rich text toolbar. it does appear when hotmail opened in internet explorer. it was working fine the other day

Java is listed as enabled under Firefox Tools/Add-ons/PlugIns and the Java Test confirms the latest version is installed and working.
Additional information. When I click on Grid it displays the solution but still with the lines of the grid missing.

Text from text module is not appearing in smartform output

Hi Experts,
We are using text modules in one of our smartform to print the sender text . The name of this text module is being dynamically determined during the execution and is coming correctly but still the the text inside the text module is not appearing in the output. We checked one more similar form which is working on the similar logic but calling a different text module , there it is working perfectly. I have tried all the possibilties like changing the window size, changing the fonts and other parameters of the text module but still its not appearing . This seems to be something unusual as in both the smartforms(one with text appearing from module and one without the text) the logic is exactly similar for getting the text module name. The name is getting determined in both the cases correctly and the text modules are also maintained in same manner for both these forms but text is appearing on one and not on other.
Kindly help if any one of you have also faced similar issue.
Regards

Hi Priyank,
There could be various reasons....
Wrong language for example
An easy way to prove this is, put the text direct into the smartforms and see, if it pops up immediately.
If so, you have to really debug this spot and see if the pased name is correct. (Copy paste it in the debugger, to be really sure, there could be a space in fornt or in the end...)
If that doesn't help, you have to share more details. Your question is not that very specific. You know
~Florian

The text "Remove" is not appearing in the remove button of Bookmarks.

Hi,
The text "Remove" is not appearing in the remove button of Bookmarks. My problem is the same as mentioned in this question.
https://support.mozilla.org/en-US/questions/1017302
The solutions suggested on the link don't seem to work. How do I resolve this? For me this problem is persisting everyday.
Thanks

You already tested in Firefox's Safe Mode and that did not make any difference?
Can you associate this problem with any software changes, such as upgrading from Firefox 31 to Firefox 32, or updating an add-on, or Windows, etc.?
Have you noticed problems with any other dialogs or menus?
Occasionally a corrupted settings file may cause issues with dialogs. This file also stores toolbar customizations. You can rename the file and customize from scratch.
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button
Leaving that window open, switch back to Firefox and Exit, either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
Pause while Firefox finishes its cleanup, then rename '''localstore.rdf''' to something like localstore.old
Start Firefox back up again. Any improvement in the Edit Bookmarks dialog?

Timing of text box will not appear. My text boxes stop working on slide 5 and they will not work for the remainder of the slide show.

Timing of text box not working. I get the first few slides to work and then on slide 5 my text boxes will not appear. And they do not appear for the rest of the slide show. Help anyone.

Text caption is timed to appear at 2 seconds, but you have a click box at 0sec. Its duration is very short, which means that I cannot see if there is a pause. I suspect this click box is pausing at the end of its timeline, which is at 0.3secs and the Text caption at 2 seconds will not appear before the user has clicked on that click box. The timeline is the core of Captivate, learn at least how to read it.
Tiny Timeline Tidbits - Captivate blog
If you want the green text caption 'Click on...' to appear right at the beginning of the slide, you have to check its Timing accordion: set it to start at 0 secs instead of 2 secs and extend its duration to the 'rest of the slide'.
I don't know what is in the Group. That group and the HIghlight box will disappear at 3 seconds. Or maybe the action that is triggered by the Clickbox is different from 'Continue'?
Lilybiri

Go - Connect to Server does NOT work - The text entered does not appear to

Two Macs with Mac OS X 10.5.2. Both migrated from Mac OS X 10.4.11. One Mactel and one PowerPC. I can see the former from the latter, but not the latter from the former:
Go/Connect to Server
gives this error all the time for all listed servers:
The text entered does not appear to be a recognized URL format
This does not help:
Mac OS X 10.5: "The text entered does not appear to be a recognized URL format" alert when connecting to server
http://docs.info.apple.com/article.html?artnum=307256
Any idea how to fix it? Thanks.

At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
I'd do it on all of them.
Then we can go on from there if you still have a problem, but with several queastions eliminated!

SCCM 2012 R2 - Software metering Reports Parameters Value not appear to choice

Hello Every Body
I hope to get answer as soon as possible
I have SCCM 2012 R2 & SQL Server 2012 SP1, my problem is ( all software metering Reports Parameters Values Not appear so I cannot select
Note:-
( All parameters Available Value set to Get Values From a Query)

Has it been over 45 days since you created the active SWM rules? Do all (most) other SWM reports
work?
all other reporting in SWM which doesn't ask for month and year working
only the problem in year & Month Parameters Values
note:-
these reports doesn't need a 45 days to work, alwasy when i install SCCM reports working only from the second day of installation

L.C value not appearing in MB51 report

Dear gurus,
The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

Dear Jay,
It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated in the below path
SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
Goods receipt made after this change will be triggered the finance document.
R,
amala

Field functional area does not appear as an entry field into the document..

Hi,
We are using the functional area field in our system. In order to access this field, we proceeded
to customize the system as follows:
- We already activate Cost of Sales Accounting for our Company Code.
- The field functional area was set optional through transaction OB41, for the posting keys required.
- The field functional area was set optional using transaction OB14, for the field status group assigned to the GL accounts.
However, we cannot enter the area functional when we are posting documents related to customers and vendors.
Although the field functional area was set optional, it does not appear as an entry field into the document screen for the
different transactions: fb70, fb60, f-02,fb01. It is only happening when we areentering the document position for the vendor/customer.
Regards,
Efrain

Hi,
In FB70 or FB60 change the layout ........ select the line item layout configuration, you get a separate Table Settings screen pop up where in you need to select "Administrator" button the system displays another pop up window where in you can check whether the Functional Area field is checked as invisible if so remove the check mark and active the settings.
Kind Regards

Saved default Parameter values not appearing in Run Time version of report

I've created a report in Crystal 2008 and set up a number of parameters. I supplied each of them with a default value. I check it out in Crystal Reports and a nice looking window opens up that shows all my parameters with the default values. I save the report and open it within our application and upon pressing print, a plain looking box appears that lists my parameters but none of the saved values are included. Is this a problem with my version of Crystal Reports (ver. 12.2.0.290) that I can get an update for to fix; Or, is this a problem with the crviewer.dll that we are running in our application (ver 11.0.0.1282, dated March 8, 2005)?
I'm worried about updating to the latest Crystal 2008 crviewer.dll because I've read where it is only for reports with Saved Data and that won't work for us. We need the ability to refresh the data on the reports.

Hi Mike,
It likely is the viewer causing the problem. 2008 now has cascading parameters and the activex viewer does not support them.
All I can suggest is you try CR XI R2 which you can upgrade for free, you have to contact CIC to get a keycode to deploy your app, and test again.
R2 is out of support now so no fixes available...
http://downloads.businessobjects.com/akdlm/crystalreports/crxir2_sp4_full_bld_0-20008684.exe
http://downloads.businessobjects.com/akdlm/crystalreports/CRYSTALREPORTS06_0-20008684.EXE
Thanks
Don

Rich text field will not show proper font attributes! (Bug? - RTF OTF font handling)

I created two text form fields (rich text)...
In Windows 7, Write program (using it to format the rich text content)... I edited my two lines.
Line one: mix of two font sizes and a few attribute changes... pasted into the first text field perfectly.
Line two: similar to the above... pasted into the second text field but the font is appearing in bold! It is not bold in the source, nor is it preset in the text field properties! I even pasted it back into Write AND Word and it pastes as I intended it.
Why is Adobe doing this? I even tried to toggle >Text Style > bold on/off, clear formatting... these functions do not work!
If I bring up the properties toolbar (Ctrl-E), bold is toggled on but I cannot toggle it off, I can add underline, I can change the font size.
UPDATE: It seems that Adobe Acrobat is NOT reading the OTF font correctly! If I change to a different font, in the same family, the problem changes from set on bold to set on italics!
It is specifically related to the font I am using but is ONLY a problem when using Rich Text fields. In other words, the entire font family works perfectly if I inserted a text box or use the font family in any other Adobe product.
I have submitted a bug report: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en

Another possibly revealing clue is that when I go to Text Field Properties > Appearance tab > Text / Font, I see the entire family of this particular font. However, when editing the text in the properties toolbar (Ctrl-E), only a small sub-set of this font family appears and the attributes behave in an odd manner. Example: normal font appears as italics but if I switch on BOLD, the italic attribute is gone... and other strange attribute problems.

Container values not appearing in alerts - SAP CRM 7.0

Hi Experts,
I have 2 issues:
1. I am calling an alert on lead creation by calling an action with processing type as TRIGGER ALERT.
The alert appears on the home page but the container values defined in the long text are not appearing. The containers defined are as follows:
OBJECT_ID - Object type - BUS2000108 - business transacton number
Call later date - Z field in CRMD_ORDERADM_H - structure - CRMD_ORDERADM_H - Field Zabcd
Please let me know if there is something i'm missing or if i need to define these values in the Method TRIGGER ALERT???
2. If i want to call this action on a particular date (call later date as above), is it possible to take the reference of this date in the start condition?
Regards
Nitin Sehgal

Dear Nitin,
The first I am not sure, so hopefully someone else can help you with that.
For the second, If you want a Z-field to be used in the action conditions, you should add an attribute to your BOR-object in SWO1.
How to do this can be found here.
[http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html|http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html]
Hope it helps...
Regards,
Pieter Rijlaarsdam

BED value not appearing in J1IIN

Hi Experts,
Currently I am into an implementation project and I am configuring CIN.My tax procedure is TAXINN. But after doing all the configuration, while doing J1IIN, BED value in invoice is not appearing in BED field (J1IIN Screen). However Edu Cess and Hr Edu Cess value is flowing properly in their respective field. I am using std condition for BED (JEXP) and I have already maintained this condition in Logistic General-Tax on Goods mov-IndiaBasic settingdetermination of excise duty--- maintain excise default.
configuration are given below
excise registration--- copy from std (1)
company code -- copy from std (IN01)
plant setting -- (single goods receipt)
maintain series grp
maintain excise grp
Tax calculation procedure -- TAXINN (country IN)
Maintain excise default ---
Tax Proc CVD            Tax Jurid                                             A/R BEDCond                              BED Perc
TAXINN     JCV1            9900     JMO1     JSO1   JAO1         JEXP                       JCES        JEXP     JAED     JSED
                                            ECS A/R    ECS perc   ECS Cond               A/R AT1 Cond      AT1 Perc
JCED                                         JECT     JECT     JECT                       JA1X                     JA1X
Classify Cond Type----
Procedure                  Condition Type                    Condition Name
TAXINN                       JEXP                                A/R BED Percentage
TAXINN                       JECT                                A/R ECS Percentage
TAXINN                       JA1X                               A/R AT1 Total
Please tell me if I am missing anything.
Thanks & Regards,
BKR

Hi,
In this case if your BED condition type is in 'Percentage' then please check your settings for 'Maintain Excise Defaults'.
Here maintain your percentage BED condition type 'JEXP' in 'BED Per' column and maintain ' JEXT' which is a condition type for 'BED total' in the 'A/R BED cond' column.
If you maintain these settings your values for BED will flow in J1IIN, But provided you have mainatined 'JEXT' condition type in your pricing procedure.
Thanks & Regards,
Rahul H.Dhole
SAP SD Consultant

Moved recording does not appear as content

I recently encountered an issue where, when I attempt to move a recording from under a meeting to a Shared Content folder, either the list of Shared Content folders does not appear or, when the move is "successful", the recording is bot listed in the new content location. Interestingly, if I change the URL of the destination location from "content" to "meeting" (http://server/admin/content/sco/... to http://server/admin/meeting/sco/...), the recordng will appear in the list. Unfortunately, under this "meeting view", there is not any editing or offline functionality. The link for the recording continues to be functional and playback works normally, but the recording is otherwise treated as a "meeting" rather than content.
Using the API, I used the sco-by-url XML action to compare the values of an affected recording to an unaffected one, but could not find anything that appeared unusual. Both recordings were identified as the "content" type.
Atempting to edit the video, or make an offline copy, by modifying the usual link produced by clicking those button with the appropriate url-path generates a "Not Found - The selected resource does not exist" error. The editing and offline copy processes worked normally prior to the move.
We are currently running Adobe Connect version 8.2.0.0:
package=8.2.0.1.156.20110921.963902
installer=8.2.0.0.11.20110728.938680
fmg=8.2.0.0.4.20110906.879854
fms=8.1.1.0.2.20110427.772086
presenter=8.2.0.0.6.20110824.924658
cps=8.2.0.1.3.20110920.973276
mssql=8.1.0.0.10.20110311.8644363
teleintercall=8.1.0.0.2.20110207.776631
telepremierena=8.1.0.0.21.20110412.882778
telepremiereemea=8.1.0.0.21.20110412.882778
cpshelp=8.2.0.0.4.20110908.964981
addins=8.2.0.0.3.20110831.929039
dbscripts=8.2.0.0.23.20110818.956139
teleavaya=8.1.0.0.4.20110412.882778
telecisco=8.1.0.0.17.20110412.882778
telemeetingone=8.1.0.0.2.20110207.776631
telephonyservice=8.1.0.0.8.20110228.847019
tomcat=6.0.29
stunnel=4.28
Is there another mechanism Adobe Connect discerns between the content and meetings so far as under with view/interface it will be displayed? Is there a way to correct this behavior for existing files? Thanks for any insight.
Eric

Having support look at this may be the best option. Since you are using your own server, you should call 866-335-2256, wait for the second round of prompts and then option 1. Have your support contract number ready when you call.

Rich text default values not appearing in content entry template

Similar Messages

Maybe you are looking for