Ridiculous problem with Flex!!!

Actually, just kidding :) I've had a few, the ridiculous part
being my lack of understanding :). I just want to say I'm really
enjoying working with Flex, I love the Apps I've created, and I
couldn't have done any of it without all of the excellent help I've
recieved on this forum. I'm getting to the point now where I can
figure things out just using all of the (very many) online
examples. I hope in the future I'll be able to help others as much
as I've been helped.
Thanks folks!
M.

Hi again,
after research I found out that apparantly it's not easy to make the preloader appear instantly (maybe impossible actually) although the DownloadProgressBar has a method that checks the ratiobetween timing and bytes downloaded (showDisplayForDownloading).
I assume that you can change this ratio or logically make the return value always true by extending the class. But this didn't work for me.
I did found another solution (actually kind of a hack but it works) where you set a timer.
This did make the preloader load instantly and smoothly.
G

Similar Messages

Hey Guys, problem with Flex Time.

Hey Guys,
i have a problem with Flex Time. I was searching for a way to copy my 1-Tackt Timplin Beat to make 12 out of it, but there were always "wholes" between the new inserted regions. So i found Flex Time, but then when i choosed a Region, pressed the Flex Time button, nothing happend, except that the Header became a little bit bigger, as if there would been added a few more options, but there came only more free space .
Would be great if somebody could help me!:)

I would suggest Option dragging the bottom right edge of the Region so it fits precicely to the grid, then copy. This is a quick way to time stretch...

Swc problem with flex from my custom fla

I have an fla which has several library items with a class linkage to a GenericButton.as file. I am exporting this fla as an swc file, and linking that swc into flex.
My problem is that when flex builds the code for GenericButton it gets undefined property for anything it tries to reference that is part of the library item.
Example:
GenericButton.as does libLabel.text = "something"; where libLabel is a textfield, instantiated in the library clip which is bound to GenericButton in it's class linkage.
The field exists in the clip, but when I compile in Flex with the swc in there, it cant find it. It says libLabel doesnt exist, undefined property.
What am I missing here? I want to allow the fla author to bind some of his items to low-level component classes like that, and it's his job to ensure that all the necessary items are part of it. So if he makes a new button, he must just ensure he has a libLabel textfield somewhere in the clip.
Why cant flex see that the items it's trying to compile have a libLabel in there? Is there a work around?

Thx for the reply Greg, but no, that's not the problem. If you re-read my post you'll probably see my problem is a little more involved than that.
I have symbols exported for actionscript and I can instantiate them in Flex, that's not a problem. The problem is symbols that are exported for actionscript and bound to a base class that contains custom code. That custom code, when it uses it to type-check in flex builder (during the swc link stage), causes undefined properties.
For some reason Flex is not seeing that the exported library item has the things the .as file is looking for.
Does that make sense?
I could probalby put together a simple example project but I'd have to find somewhere to upload it so that others could see.
This problem is hard to describe, you have to read what I'm saying very carefully.

Video Display Problems with Flex Builder 2

I am currently trying out the Flex Builder 30-day trial and
have been having problems running the software.
System info:
FB 2.0.1
Dell Latittude D820 running WinXP
NVIDIA Quadro NVS 120M Video Card
When I first installed it, my display turned to garbage and I
had to reboot my machine to get it to a usable state. Someone
suggested changing my display properties and see if it helped. When
I tried 768X1024 with 8-bit color it worked. Once I installed it, I
changed them back to 1920X1200 32-bit. Everything seemed to work
fine until I started getting into some more complicated tutorials.
My display crashed and looked similar to what I saw before. I
updated to the latest NVIDIA driver from Dell. No help. I then
tried the Windows Troubleshooting. When I turned my hardware
acceleration to None, it started working again. There are some
weird display issues with menu buttons and I can't launch my Nvdia
software.
Is there a better solution to this? Has anyone had this
problem? I'm not so sure I'll purchase the software with this many
problems.
Thanks,
Wendi

Boys n Girls
I am Currently restoring my Power Book after a significant meltdown.
Thanks for posting I too saw the shearing effect but shrugged it off thinking oh well I'll just reboot!
If you are seeing this Buy a fire wire drive NOW and Back-up.
I suspect the Video update changed a low level feature in the power management routines and this resulted in my Power book cooking itself.
I've got a 12mth old Hitachi 7200 PATA drive in my Power Book after the Apple Drive cooked itself soem tim back and I have now got to back-up and restore my whole system. Luckiliy I have plenty of Big fast firewire drives around so I'm imaging the corrupt drive and going to run the Hitachi tool on it via a WINDOZE Thinkpad. Then a combination of clean install of 10.5.x and a migration assisted restore should do it.
I'm really not very happy though! My Time machine image did not restore and the disk repair did not work. I have a corrupted asl.DB ( the log file for Apple System Logs) and the mac won't boot from its internal drive.
I'll post the resolution here as it happens I'm at hour Disaster + 24 so I'm really cranky!
I suggest If you have a G4 Power Book you resist the temptation to install the video update.
Regards

Problems with flex and php.

Hello, my name is Gamaliel Arredondo, i have to develope a project in flash builder 4 using the data service to connect with php, the application has installed the zend framework automatically just like the tutorials said, I use xampp and i have the files in the htdoc location, all the path are correct but when i want to connect to my php classes i receive this message:
Make sure that Zend Framework is installed correctly and the parameter "amf.production" is not set to true in the amf_config.ini file located in the project output folder. /0/onResultÿÿÿÿ � Uflex.messaging.messages.AcknowledgeMessage correlationId clientId destination messageId timestamp timeToLive headers body I797BFBCC-250A-A100-9954-68CD2AC82DF5 I2570DA6E-2F76-55E9-2249-000075B2C293 I590AA123-C3CE-5F48-6A94-00002F9B370A 126571301000 ‡G
I have searched on internet in order to find a solution but i haven't found anything that can help me, so i would like to receive some of help, my email is [email protected], if you can help me i will thank you so much, have a nice day.

Hello, I am Gamaliel Arredondo, i have solved this problem, the error is in the code, you have a mistake in your code, check it out.
The way to run the flex applications, in my case, i installed xampp, in the htdoc directory i put the folder with the files of the application and all is working very well, only when the apache is running because if it is stoped the application show error, please review your code and if you have problems you can contact me by e-mail ([email protected]) i also fought with that problem but i could find the solution, i hope to help you.

Problem with Flex Builder 4 Plugin and SpringSource 2.3.2.RELEASE

I am getting following error while opening up a Flex project. The file icons are showing up correctly but then it is creating a stream of following errors.Any help is appreciated.
Session Data
eclipse.buildId=2.3.2.201003230009-RELEASE
java.version=1.6.0_18
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=en_US
Framework arguments: -product com.springsource.sts.ide
Command-line arguments: -os win32 -ws win32 -arch x86_64 -product com.springsource.sts.ide
Exception Track Trace:
java.lang.NoClassDefFoundError: com/adobe/flexide/editorcore/EditorUtility
at com.adobe.flexbuilder.editorcore.editor.ToggleModeAction.selectionChanged(ToggleModeActio n.java:64)
at org.eclipse.ui.internal.PluginAction.refreshEnablement(PluginAction.java:206)
at org.eclipse.ui.internal.PluginAction.selectionChanged(PluginAction.java:277)
at org.eclipse.ui.internal.PluginAction.selectionChanged(PluginAction.java:299)
at org.eclipse.ui.internal.AbstractSelectionService.fireSelection(AbstractSelectionService.j ava:156)
at org.eclipse.ui.internal.AbstractSelectionService$1.selectionChanged(AbstractSelectionServ ice.java:62)
at org.eclipse.jface.viewers.Viewer$2.run(Viewer.java:162)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.core.runtime.Platform.run(Platform.java:888)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.viewers.Viewer.fireSelectionChanged(Viewer.java:160)
at org.eclipse.jface.viewers.StructuredViewer.updateSelection(StructuredViewer.java:2132)
at org.eclipse.jface.viewers.StructuredViewer.handleSelect(StructuredViewer.java:1160)
at org.eclipse.jface.viewers.StructuredViewer$4.widgetSelected(StructuredViewer.java:1190)
at org.eclipse.jface.util.OpenStrategy.fireSelectionEvent(OpenStrategy.java:228)
at org.eclipse.jface.util.OpenStrategy.access$4(OpenStrategy.java:222)
at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:389)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
at org.eclipse.equinox.launcher.Main.main(Main.java:1287)

I can reproduce the problem but for me it does not seem that it is caused by the SSL handshake because that one is already successfully finished at the moment of the ClassNotFoundException. Did you try the phenomenon with different browsers and/or the appletviewer too ? Maybe it is only a problem of the plugin class loader. How did you convert to Java 1.4 ? I always use a HTML template with an <applet> tag and then use htmlconverter from the JDK to convert it to the needed JRE.
good luck - mad

Problem with Flex Builder 3

Hey Experts,
I tried creating Flex Library Project in Flex Builder 3. No issues so far. Everything works fine. When the day ends, I close Flex Builder (without closing the project as it restores them during next launch). I had to close it...I can't keep the system running. Global warming you know...Next day when I launched Flex Builder, I could see my project there. However, when I open Project Properties dialog box, I get some errors while trying to open Flex Library Build Path or Flex Library Compiler pages. The error says "The currently displayed page contains invalid values."
C'mon man you gotta be kidding me. Yesterday you didn't say anything. What's the matter with you today. By the way, I didn't change anything in properties. How could I? I am unable to open it...
Does anyone understands Flex Builder's logic here?

Mate the first thing I tried was this...
If you want to see the problem, try crating a Flex Library Project in Flex Builder 3. Create couple of classes and close Flex Builder without closing the project. Re-launch Flex Builder and try to open Project -> Properties -> Flex Build Path or Project -> Properties -> Flex Compiler. You should be able to see the problem.

Problems with Flex builder upgrade

Hi, I'm trying to upgrade my copy of Flex Builder to
2.0.1 so that I can install the Apollo plugin, but when I run the
upgrade the wizard says it cannot find the correct folder
apparently it does not contain the plugin and features folders, but
I know it does I can see them. I have installed Flex builder on the
D drive of my PC, I'm not sure if that is the cause of the problem.
I also have a copy of Eclipse 3.2 with the Flex Builder plugin
installed, which does have the Apollo plugin working, but I'd like
to have the full Flex builder working so I can use the RDS plugins
to view my databases, which doesn't work in Eclipse 3.2.
So what is the best place to have Flex Builder installed so I
can get Cfeclipse, RDS and Apollo plugins to work?
Thanks
Stephen

Is Flex Builder running? In Beta 3 we have a problem in that
we were opening the Help in an external browser, which stays open
when you stop Flex Builder (which, in turn, stops the Tomcat
instance that runs the Help).
For final, we'll rever to using the internal browser window
by default, which closes when you close Flex Builder.
HTH

Problems with Flex 2 beta 3 tutorials

In the tutorial:
Build a distributed application with the ActionScript object
adapter
the following mxml file is written:
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
height="100%" width="100%"
creationComplete="initApp();">
<mx:Script>
<![CDATA[
import mx.data.DataService;
import mx.data.events.*;
import mx.rpc.AsyncToken;
import mx.rpc.events.*;
import mx.messaging.events.*;
import mx.utils.ObjectProxy;
public var noteObj:Object = new Object();
public var getToken:AsyncToken;
private var ds:DataService;
[Bindable]
public var noteProxy:ObjectProxy;
private function initApp():void
ds = new DataService("notes");
ds.addEventListener(ResultEvent.RESULT, resultHandler);
ds.autoCommit = false;
noteObj.noteId = 1;
noteObj.noteText = "Type your notes here and share them with
other clients!";
getToken = ds.getItem(noteObj, noteObj);
public function resultHandler(event:ResultEvent):void
if (event.token == getToken)
noteProxy = ObjectProxy(event.result);
]]>
</mx:Script>
<mx:Binding source="log.text"
destination="noteProxy.noteText"/>
<mx:TextArea id="log" width="100%" height="100%"
text="{noteProxy.noteText}"/>
<mx:Button label="Send" click="ds.commit();"/>
</mx:Application>
When I run it, I get the error:
MessagingError message=Unknown destination 'notes'.
This destination is correctly specified in the
flex-data-service.xml
file (I did not have to change it) which is located at
C:\fds2\jrun4\servers\default\samples\WEB-INF\flex, which I
think is the
correct place for it, but how does flex know which directory
to use?
In the default server there is another directory called
flex\WEB-INF\flex which also contains a (different)
flex-data-service.xml file.
I tried the file with the 'notes' destination in it in this
directory,
but that didn't work either.
The complete error message is:
MessagingError message=Unknown destination 'notes'.]
at mx.messaging.config::ServerConfig$/getChannelSet()
at
mx.messaging::MessageAgent/mx.messaging:MessageAgent::initChannelSet()
at mx.data::DataConsumer/initConsumer()
at
mx.data::ConcreteDataService/
http://www.adobe.com/2006/flex/mx/internal::reconnect()
at mx.data::ConcreteDataService/getItem()
at mx.data::DataService/getItem()
at tutorials1/initApp()
at tutorials1/___Application1_creationComplete()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/set initialized()
Can anyone offer any clues about how the messaging service in
Flex2
works and where I might look to try to solve the problem?
Doug

Sorry to waste everyone's time. I realized as soon as I'd
written the
post that flex knows where to find the file because it has to
be in the
same directory.
Once I moved the files into a tutorials directory in
C:\fds2\jrun4\servers\default\samples\WEB-INF\flex
it all worked.
Pity MM didn't just write that in the tutorial instead of
talking about
a 'samples web application' which for newcomers surely is
meaningless.
Doug

Having a ridiculous problem with swiping (4S)

Bought a 4S yesterday, first thing I noticed was that the notifications "swipe down" did nothing; okay, I can live with that. Today, after restarting, my screen is dividing into different sections with outlines, around apps and such. I can't swipe up down left or right. I have to double press everything and even then there are problems. Did I turn on some weird setting or do I have a real problem? I restored the software as well...I don't know what to do

Could you describe the problem in more detail? What gesture are you using and what used to happen that isn't happening now, or the other way around?

Problem with Flex Beta3 and Design mode

Hi
I’ve installed de Flex beta 3 version and Flex exit the
programm with an error feed back :
VM terminated. Exit code=1 and many others parameters when I
click on the Design button mode.
System Vista Pro, 32 bits, french version, 4Go of RAM, video
: NVIDIA GeForce 8600M GT
Thanks

Hi,
I've been having this same issue: Open Flex 3 milestone 4
--> Create New Project --> Click Finish --> Click on the
Design Mode Tab --> Crash!
I've checked the error log and my name only has the
characters: (1, a, e, n, p, y). None of these, from what I can
find, are
high ASCII or 2-byte characters.
Here
is a screenshot of the error message/window that comes up.
Here is the
error log that is generated. (I'm not sure if there is more
info in this than I should be posting, please let me know if i
should remove this).
Anyway, this error is pretty frustrating and is causing me
some substantial grief at work. Any help and/or tips would be
appreciated.
Thanks,
-Tom

Problem with Flex Plugin for eclipse

Hi there
I have downloaded the latest Europa Eclipse and also the the
Flex builder plugin. The Flex wizard for installing the plugin
tells me to select the folder where my eclipse is installed. When I
do this, I get an error message saying that I must choose a valid
3.* Eclipse directory.
I have no idea what the problem is?????

Hi
I am having same issue, I don't know how to procced. My
installation has eclise Version: 3.3.1.1
Build id: M20071023-1652 and configuration directory.
Any help on this is highly appreciated
thanks
Jay

Problems With Flex Time

I just updated to Logic 9 on my late model Mac Book pro, and I was all excited to do some beat detective type drum editing. I am attempting to create transient markers and separate the audio files, based on kick and snare hits, and then align to the grid, and manually tweak crossfades, to avoid unwanted audio artifacts. However, when I control click on a file and attempt to 'slice at transient markers,' I get an error message that says Logic can only cut transients 32 bars at a time. Really? That seems wimpy. Second, when I go ahead and shorten the song to 32 bar chunks and try again, logic does not cut the markers based on the Q-reference tracks, but instead cuts every marker on every track. My drums are grouped as a phase aligned editing group, but obviously, there is no possibility of aligning to grid when single transient is cut. Help!!! What am I missing?

The title says 'flex' but your description doesn't sound like your using flex time here, so I'll point you to this video that may help with the way you are trying to do it:
2 parts (yeah, they're the same as that other thread)
http://www.youtube.com/watch?v=KyhERxK-YD8&feature=channel
http://www.youtube.com/watch?v=WHUuWZ4xE7w&feature=channel

Problems with Flex

Please could someone   tell me what is it I am doing wrong.   have been trying to display jsp data in a Flex datagrid. I have not been successful. My code is submitted below:
Thank You
Jonas
My Flex   Code
============================================================
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
    applicationComplete="employeeService.send()" viewSourceURL="srcview/index.html">
<mx:HTTPService id="employeeService" useProxy="false" resultFormat="e4x" method="POST"
url="http://10.60.7.49:8084/myTest/workers.jsp" />
             <mx:DataGrid width="657" height="345" dataProvider="{employeeService.lastResult.people.person}" x="64" y="96">
                         <mx:columns>
                <mx:DataGridColumn dataField="name"   headerText="Name"/>
                <mx:DataGridColumn dataField="age"    headerText="Age"/>
                <mx:DataGridColumn dataField="skills" headerText="Skills"/>
              </mx:columns>
            </mx:DataGrid>
</mx:Application>
my Jsp Code:
=========================
<%
out.println("<?xml version=\"1.0\" encoding=\"UTF-8\"?><people><person><name>jonas okwara</name><age>43</age><skills>Java, C++ </skills></person<person><name>chioma okwara</name><age>35</age><skills>bible, linux</skills></person></people>");
%>

Try the following:
dataProvider="{employeeService.lastResult..person}"
The '..' operator returns a list of all 'person' elements in the XML.

Problem with Flex print- characters are being chopped off

help please

Bottom of the page characters are being chopped off I am
using
private function doPrint():void {
var myPrintJob:FlexPrintJob = new FlexPrintJob();
myPrintJob.start();
myPrintJob.addObject(printArea1);
myPrintJob.send();
Code is:
<mx:Canvas backgroundColor="white" height="70%"
width="100%" visible="true">

<mx:VBox width="90%" height="100%" visible="true"
id='printArea1' includeInLayout="true">
<mx:VBox paddingLeft="0" paddingRight="0"
horizontalGap="0" >
<mx:HBox>
<mx:VBox width="20%">
<mx:HBox>
<mx:Label styleName="printFont" text="Role:"
width="50"/>
<mx:Label styleName="printFont"
text="{role.selectedItem.DAFYROLE}"/>
</mx:HBox>
</mx:VBox>
<mx:VBox width="40%">
<mx:HBox id='idPrintFacility'>
<mx:Label styleName="printFont" text="Facility:"/>
<mx:Label styleName="printFont"
text="{facs.selectedItem.LABEL}"/>
</mx:HBox>
</mx:VBox>
<mx:VBox width="30%">
<mx:HBox>
<mx:Label styleName="printFont" text="Patient:"/>
<mx:Label styleName="printFont"
text="{patient.selectedItem.LABEL}"/>
</mx:HBox>
</mx:VBox>
</mx:HBox>
<mx:HBox>
<mx:VBox width="20%">
<mx:HBox>
<mx:Label styleName="printFont" text="Filter By:"/>
<mx:Label styleName="printFont" text="{filter.text}"/>
</mx:HBox>
</mx:VBox>
<mx:VBox width="40%">
<mx:HBox>
<mx:Label styleName="printFont" text="From"/>
<mx:Label styleName="printFont"
text="{fromDate.text}"/>
<mx:Label styleName="printFont" text="To"/>
<mx:Label styleName="printFont" text="{toDate.text}"/>
</mx:HBox>
</mx:VBox>
</mx:HBox>
</mx:VBox>
<mx:Repeater id="idCatsx" dataProvider="{myNotes}"
width="100%" >
<mx:HBox id="idCatLabel">
<mx:HBox>
<mx:Label styleName="printFontBold"
text="{idCatsx.currentItem.LABEL}" fontWeight="bold" />
</mx:HBox>
<mx:HBox>
<mx:Spacer width="10"/>
</mx:HBox>
</mx:HBox>
<mx:HBox width="100%">
<mx:VBox width="10%">
<mx:Spacer width="10"/>
</mx:VBox>
<mx:VBox width="90%" height="100%">
<mx:Repeater id="idTipsx"
dataProvider="{idCatsx.currentItem.NOTES}" >
<mx:HBox width="100%" verticalGap="0" >
<mx:VBox>
<mx:Label styleName="printFont"
text="{idTipsx.currentItem.NOTES_DATE}" />
</mx:VBox>
<mx:VBox height="100%">
<mx:HBox height="100%">
<mx:Text width="500" styleName="printFont"
text="{idTipsx.currentItem.NOTE_TEXT}" />
</mx:HBox>
<mx:HBox height="100%">
<mx:Text styleName="bold" width="600"
text="{idTipsx.currentItem.ADDMODIFYTEXT} on
{idTipsx.currentItem.TIME_STAMP} for Assessment
Date:{idTipsx.currentItem.ENCDATE_DATE}" />
</mx:HBox>
</mx:VBox>
</mx:HBox>
<mx:HBox verticalGap="0">
<mx:VBox width="100%" verticalAlign="top" verticalGap="0"
height="100%">
<mx:VBox >
<mx:Repeater id="idHistx"
dataProvider="{idTipsx.currentItem.HIST}">
<mx:HBox width="100%" >
<mx:VBox>
<mx:Spacer width="115"/>
</mx:VBox>
<mx:Canvas height="100%">
<comp:StrikeThroughText width="500" height="100%"
styleName="printFont"
text="{unescape(idHistx.currentItem.NOTE_TEXT)}"/>
</mx:Canvas>
</mx:HBox>
<mx:HBox>
<mx:VBox>
<mx:Spacer width="115"/>
</mx:VBox>
<mx:VBox height="100%" width="100%">
<mx:Text width="600" styleName="bold" text="Notes
{idHistx.currentItem.ADDMODIFYTEXT} on
{idHistx.currentItem.TIME_STAMP} for Assessment
Date:{idTipsx.currentItem.ENCDATE_DATE}" />
</mx:VBox>
</mx:HBox>
</mx:Repeater>
</mx:VBox>
</mx:VBox>
</mx:HBox>
</mx:Repeater>
</mx:VBox>
</mx:HBox>
</mx:Repeater>
</mx:VBox>
</mx:Canvas>

Ridiculous problem with Flex!!!

Similar Messages

Maybe you are looking for