RMAN/Dataguard 32bit RAC on OCFS2 primary to 64bit standby on ASM

Hi,
I would like to know if RMAN backup and dataguard standby can be created/configured for primary RAC db on OCFS2 32bit to standby RAC db on ASM 64bit?
This is for migration purposes as opposed on ongoing to minimize downtime.
Thanks,
Gareth

You have neither an OS nor database version? This is answer for 10g:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/standby.htm#i72053
Werner

Similar Messages

  • 32bit Primary to 64bit Standby-"ORA-00704: bootstrap process failure"

    Hello All,
    As per the Doc ID 414043.1 it is possible to use mixed word size primary-standby configurations since 10g and better in 11g.
    So i created my test env:-
    OS: Linux 5.5 64bit
    DB Name: TEST
    Primary  - TEST32 on 32bit Oracle Home
    Standby-  TEST64 on 64bit Oracle Home
    I could apply TEST32's archive logs(manually) on TEST64 without any problem, but when i tried to migrate to 64bit it kept failed with "ORA-00704: bootstrap process failure ORA-39700: database must be opened with UPGRADE option"
    What i did on TEST64 is:
    1) Activate physical standby
    2) Startup Upgrade
    3)@?/rdbms/admin/utlirp.sql
    4)@?/rdbms/admin/utlrp.sql
    5)Shutdown
    6)Startup
    When i issue startup(step 6); it fails with
    <pre>
    SQL> startup;
    ORACLE instance started.
    Total System Global Area 1670221824 bytes
    Fixed Size 2227072 bytes
    Variable Size 419431552 bytes
    Database Buffers 1241513984 bytes
    Redo Buffers 7049216 bytes
    Database mounted.
    ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-00704: bootstrap process failure
    ORA-39700: database must be opened with UPGRADE option
    Process ID: 22712
    Session ID: 126 Serial number: 5
    SQL> exit
    ＜/pre＞
    Did i go wrong somewhere ?
    TIA,
    JJ

    What i did on TEST64 is:
    1) Activate physical standby
    2) Startup Upgrade
    3)@?/rdbms/admin/utlirp.sql
    4)@?/rdbms/admin/utlrp.sql
    5)Shutdown
    6)Startup
    SQL> startup;
    ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-00704: bootstrap process failure
    ORA-39700: database must be opened with UPGRADE option
    Process ID: 22712
    Session ID: 126 Serial number: 5SQL> Startup upgrade.

  • Starup of active dataguard in RAC

    Hi,
    i have a setup of active dataguard in RAC. This is my first time implementing dataguard in RAC.
    Primary - RAC
    Standby - RAC with active dataguard
    when ever standby server(anyone of the RAC instance) reboots it is getting till mount state. And after that how can i get the database be opened and put in recovery mode to do redo apply.
    I tried to push manual script as a startup script . Intially i kept sleep command for 15-20min and then connect to db instance and try to recovery from mounted database. But my mounted database is taking 15-30min to comeup once the server is rebooted.
    please help me how we configure startup statements once the RAC is in mount state(cluster is getting till this point) after server reboot.

    Hello;
    If you are not using Data Guard Broker you need to open the standby database and set it in read only mode and then start the managed recovery as shown below.
    SQL> shutdown immediate;
    SQL> startup
    SQL> recover managed standby database using current logfile disconnect;
    With broker its like this :
    Stop redo apply with the following command from Data Guard Broker
    DGMGRL> EDIT DATABASE '?' SET STATE='APPLY-OFF';
    Open standby read-only via SQL*Plus
    SQL> alter database open read only;
    Restart redo apply via broker
    DGMGRL> EDIT DATABASE '?' SET STATE='APPLY-ON';
    Best Regards
    mseberg

  • Primary in standalone , Standby in RAC

    What a preposterous Idea. I know.... This is not for production .
    I have created standalone Primary to standalone Standby succesfully in the past.
    At work I've been asked to create a 2-node standby DB for our 2-node RAC DB using RMAN Duplicate. I am planning to test this on my Laptop first. But my Laptop has only 8gb RAM. Using VM Ware workstation 8, I am planning to create
    Primary : A standalone DB
    Using RMAN Duplicate, I'll be creating
    Standby : A 2-node RACSince Primary is standalone and has only 1 thread and standby DB in RAC having 2 threads, I am not sure if this will work. Ever heard of anyone creating a setup like this.
    DB version :11.2.0.2
    Guest OS : Solaris 10 (August 2011 Release )
    Host OS : Windows 7
    Using VM Ware workstation 8

    Earlier ihad the same doubt.
    Larry carpenter & me had a discussion on this, I can remember that. Read below post.
    primary stand alone - standby 2 node physical rac?
    Close the thread if answered and keep the forum clean.

  • Please help with RMAN dup for RAC db

    Happy Holidays!! All,
    I need help with the following issue:
    Both target and auxiliary databases are:
    Database version is 10.2.0.3 with 2-node RAC db
    Servers are MS 2003
    Oracle Clusterware 10.2.0.3
    Oracle ASM for storage
    I have run the rman dup from RAC to a single instance db for a while. This is the first time I ran from RAC to RAC. This auxiliary db was refreshed before and was up for a while and was managed by server control tool. Now I am trying to refresh it with new backup files from production. I did the following as people suggested:
    1)     shutdown instance in the second node.
    2)     Startup nomount mode in the first node
    3)     Run RMAN dup
    It failed in the same place with slightly different errors. I pasted error messages at the bottom. I already created a TAR with Oracle but would like to know if anybody has any info related to this. Also I have several questions to ask:
    1)     Should I stop all services related to Oracle in node-2
    2)     Should I stop all clustware related services in node-1 except oracleCSServie since ASM uses it?
    3)     Is there any way I can finish the dup manually from the place I failed? What going to happen if I don’t finish the rest of the dup and go ahead with “alter database open resetlogs”?
    4)     How do I remove the database from under Server control – I already run “srvctl remove database -d atlrac” successfully. Is this all?
    Thanks a lot for your help and have a great holiday season!!!
    First time run:
    contents of Memory Script:
    shutdown clone;
    startup clone nomount ;
    executing Memory Script
    database dismounted
    Oracle instance shut down
    connected to auxiliary database (not started)
    RMAN-00571: ====================================================
    RMAN-00569: ======= ERROR MESSAGE STACK FOLLOWS ==============
    RMAN-00571: =============================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2009 20:24:47
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04014: startup failed: ORA-00610: Internal error code
    Second time run:
    contents of Memory Script:
    shutdown clone;
    startup clone nomount ;
    executing Memory Script
    database dismounted
    Oracle instance shut down
    connected to auxiliary database (not started)
    RMAN-00571: ===================================================
    RMAN-00569: ========== ERROR MESSAGE STACK FOLLOWS ==========
    RMAN-00571: ===================================================
    RMAN-03002: failure of Duplicate Db command at 12/22/2009 15:53:27
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04014: startup failed: ORA-03113: end-of-file on communication channel
    Shirley

    1) Should I stop all services related to Oracle in node-2
    No, you just need to stop the second instance.
    2) Should I stop all clustware related services in node-1 except oracleCSServie since ASM uses it?
    No, you don't need to stop anything. Just have the instance startup nomount.
    3) Is there any way I can finish the dup manually from the place I failed? What going to happen if I don’t finish the rest of the dup and go ahead with “alter database open resetlogs”?
    You have not shown enough information. Did the restore succeed ? Did the recover succeed ? What was it doing when it failed ?
    4) How do I remove the database from under Server control – I already run “srvctl remove database -d atlrac” successfully. Is this all?
    Yes, srvctl remove database is all you need. (unless you also want to remove from listener.ora, tnsnames.ora, oratab etc)

  • RMAN backup on RAC

    Hi,
    DB=10.2.0.4 OS=RHL (RAC with 2 nodes db01,db02). Following are the types of automated RMAN backups taken on db01.
    - OCR
    - Voting Disk
    - Talespaces Snapshot
    - Archivelog (every hour)
    - Backup Incremental level 0 (SUNDAY)
    -- backup incrementa level 1 (Mon-SAT)
    - Autobackup of Control file and SPFILE (CONTROLFILE AUTOBACKUP ON)
    Two main questions please. First, are these backups/backup types are enough FOR FULL RESTORE when talking about RMAN backup on RAC environment with 2 nodes? If not please suggest what else I need to backup?
    Secondly, backup home location is /rman which I can see on db01 ONLY. This /rman directory I cannot see on db02. My question is that In case of db02 failure can I restore from this /rman directory? or do I need to automate backup schedules also on db02 separately?
    [root@db01~]# df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/mapper/VolGroup00-LogVol00
                          3.9G  2.9G  814M  79% /
    /dev/sda3             190M   34M  147M  19% /boot
    tmpfs                  16G     0   16G   0% /dev/shm
    /dev/mapper/VolGroup00-LogVol05
                          3.9G  137M  3.6G   4% /home
    /dev/mapper/VolGroup00-LogVol03
                          3.9G  225M  3.5G   6% /tmp
    /dev/mapper/VolGroup00-LogVol02
                          7.8G  3.7G  3.8G  50% /usr
    /dev/mapper/VolGroup00-LogVol04
                          3.9G  379M  3.4G  11% /var
    /dev/mapper/VolGroup00-ORACLE_BASE
                           12G  8.7G  2.6G  78% /oracle
    10.10.28.140:/vol/px4cinconso
                           40G  1.4G   39G   4% /inconso_px
    /dev/mapper/36001ec9000d5ea810000061349015d98
                          1.3T  551G  665G  46% /rman
    [root@db02~]# df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/mapper/VolGroup00-LogVol00
                          3.9G  887M  2.9G  24% /
    /dev/sda3             190M   34M  147M  19% /boot
    tmpfs                  16G     0   16G   0% /dev/shm
    /dev/mapper/VolGroup00-LogVol05
                          3.9G  137M  3.6G   4% /home
    /dev/mapper/VolGroup00-LogVol03
                          3.9G  261M  3.5G   7% /tmp
    /dev/mapper/VolGroup00-LogVol02
                          7.8G  3.7G  3.8G  50% /usr
    /dev/mapper/VolGroup00-LogVol04
                          3.9G  355M  3.4G  10% /var
    /dev/mapper/VolGroup00-ORACLE_BASE
                           12G  6.5G  4.8G  58% /oracle
    10.10.28.140:/vol/px4cinconso
                           40G  1.4G   39G   4% /inconso_px
    [oracle@db01~]$ rman target /
    Recovery Manager: Release 10.2.0.5.0 - Production on Fri Feb 24 11:49:59 2012
    Copyright (c) 1982, 2007, Oracle.  All rights reserved.
    connected to target database: F1 (DBID=1245145263)
    RMAN> show all;
    using target database control file instead of recovery catalog
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 28 DAYS;
    CONFIGURE BACKUP OPTIMIZATION ON;
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rman/f1/fullbackup/%F';
    CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/product/10.2.0/db/dbs/snapcf_f11.f'; # default
    # Script for backup
    level0 ()
    run {
      allocate channel c1 type disk  maxpiecesize 2000M format '/rman/$ORACLE_SID/fullbackup/$ORACLE_SID-data-%U-%t';
      allocate channel c2 type disk  maxpiecesize 2000M format '/rman/$ORACLE_SID/archive/$ORACLE_SID-arch-%U-%t';
      backup incremental level 0 tag = weeklyfull database channel c1
      plus archivelog tag = ARCH_$TODAY delete all input channel c2;
      release channel c1;
      release channel c2;
    run {
      allocate channel c1 type disk;
      delete noprompt obsolete;
      release channel c1;
    }Bundle of thanks.
    Regards,
    Edited by: 910385 on Feb 24, 2012 3:00 AM

    Hi,
    THanks alot for your feedback. Makes my life easier :) . But actually I started studying this all subject because of the following error message in the log file. I found out about this error that doesn't seem to harm. Just wait for the job to finish or it will sort out automatically. Here are the lines from the log file.
    Fehler in Backuplogs gefunden:/oracle/log/fcp11-backup-2300.log: RMAN-00571:
    ===========================================================brRMAN-00569: ===============
    ERROR MESSAGE STACK FOLLOWS ===============brRMAN-00571:
    ===========================================================brRMAN-03009: failure of
    Control File and SPFILE Autobackup command on c1 channel at 02/08/2012
    06:10:41brORA-00230: operation disallowed: snapshot control file enqueue unavailableI studied few important lines from one of my book, Oracle 11g RMAN backup and recovery (Roberg G Freeman) that I am going to write after the following MAIN ISSUE:
    Node 1
    RMAN> show all;
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/product/10.2.0/db/dbs/snapcf_fp11.f'; # default
    Node 2
    RMAN> show all;
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/product/10.2.0/db/dbs/snapcf_fp12.f'; # default
    Thing which I just noticed regarding the above RMAN error is that snapcf_fp11.f can be seen on the Node 1 on todays date but snapcf_fp12.f was only on 10th jan.
    [oracle@db01dbs]$ ls -lrth
    -rw-r----- 1 oracle oinstall  20M Feb 27 15:10 snapcf_fcp11.f
    [oracle@db02dbs]$ ls -lrth
    -rw-r----- 1 oracle oinstall  20M Jan 10 13:28 snapcf_fcp12.fTHe few lines from the book which I mentioned above are: (Though you might not need to read those lines):
    "You need to move the snapshot control file to a shared location if you plan to run backups from more than one node. If you do not move the snapshot control file to a shared file system such as OCFS or an ASM disk group, then you must make sure that the local destination is identical on all nodes."
    My question is of course, how to sort out the above log file error. Becuse in our case, backups are run only from one node, and snaphost control file is not being moved to ASM disk groups. Local destination is also same on both the Nodes, isn't it (with different names). Why on Node 2 last snapshot was taken on 10th jan while on Node 1 it is todays date which seems fine.
    Control file and SPFILE which I noticed are stored on ASM disk groups also, so being shared between the two Nodes.
    (Sanme names/same location for control file and SPFILE on Node 1 and Node 2)
    Control file:
    +REDO1/fp1/controlfile/current.256.652803827
    +DATA1/fp1/controlfile/current.441.652869697
    SPFILE:
    +DATA1/fp1/spfilefcp1.oraPlease suggest.
    Thank you.
    Regards,
    Edited by: 910385 on Feb 27, 2012 7:43 AM

  • RMAN for 10g RAC in windows2003

    Hello experts,
    could any one help to configure RMAN for 10g RAC in windows2003?
    thanks,

    Hi;
    Please check:
    RMAN: RAC Backup and Recovery using RMAN [ID 243760.1]
    RMAN configuration in ORACLE RAC database
    RMAN configuration in ORACLE RAC database
    RMAN and RAC
    RMAN and RAC
    Also check this search:
    http://forums.oracle.com/forums/search.jspa?threadID=&q=RMAN+RAC&objID=f384&dateRange=all&userID=&numResults=15
    I belive those are will answer your question
    Regard
    Helios

  • How to RMAN backup in RAC with OCFS

    hi,
    Iam using RAC 10.2.0 in windows 2003 server with OCFS .. i want to take backup using RMAN utility. can any sugest me how take RMAN backup..
    Thanks
    harish

    The only real consideration in RMAN on RAC is a one-off configuration issue as to whether the snapshot controlfile is written to the shared disk or not (it needs to be on the shared disk, or on a location that is common to all nodes, otherwise a backup that includes the control file will fail at the point a node tries to write it to a destination directory that only made sense to another node).
    Otherwise, there's not a lot that's different about an RMAN backup in RAC versus non-RAC.
    Simple answer, as a result: open a DOS window, type rman target /, then type backup database;

  • Primary and Physical Standby databases hanging on sqlplus shell command...

    I am primarily a java developer that has had the task of oracle dba thrust upon me due to circumstances that are beyond my control. In the QA lab we have two oracle 10 g release 1 instances running. They set up in a dataguard configuration: one is the primary and the other is in a physical standby.
    Last week I noticed that the disk space on the primary database was at 100%. After some investigation I discovered that a good deal of the files taking up space on the box were log files and the best solution that I could think of would be to delete all old archive files. So I deleted the old archive files that were at least two weeks old using RMAN.
    During this week the database started to shutdown automatically. The QA associate restarted the database twice using the ‘STARTUP’ command from sqlplus. Additionally, the standby database began to have issues: when login in to sqlplus the application would just hang: no ‘SQL” prompt or anything. Finally today the primary database has also begun to hang in a similar manner.
    I have looked at many of the trace files and alert logs but haven’t been able to really discern what the real problem is with the database and the proper rectification for the database. Does anyone have a clue into what is going on? If someone could even point me in the right direction it would be greatly appreciated.

    Guessing that your flash recovery area is full, archiving is stopped so the instance appears to hang.
    Do you see messages like so in the alert log:
    You have following choices to free up space from flash recovery area:
    1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
       then consider changing RMAN ARCHIVELOG DELETION POLICY.
    2. Back up files to tertiary device such as tape using RMAN
       BACKUP RECOVERY AREA command.
    3. Add disk space and increase db_recovery_file_dest_size parameter to
       reflect the new space.
    4. Delete unnecessary files using RMAN DELETE command. If an operating
       system command was used to delete files, then use RMAN CROSSCHECK and
       DELETE EXPIRED commands.
    ************************************************************************

  • How do the application servers connect the new database after failing over from primary DB to standby DB

    How do the application servers connect the new database after failing over from primary DB to standby DB?
    We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
    When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround. 
    Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
    Oracle support provides us the answer as following:
    ==================================================================
    Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
    After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
    Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
    JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
    FAN server-side callouts can be configured on the database tier.
    FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
    =======================================================================================
    Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
    Thank very much in advance.

    Hi mesbeg,
    Thanks alot.
    For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
            <subsystem xmlns="urn:jboss:domain:datasources:1.0">
            <datasources>
                    <datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
                        <connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
                        <connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
                        <driver>oracle</driver>
                        <pool>
                            <min-pool-size>2</min-pool-size>
                            <max-pool-size>10</max-pool-size>
                            <prefill>true</prefill>
                        </pool>
                        <security>
                            <user-name>TEST_USER</user-name>
                            <password>Password1</password>
                        </security>
                        <validation>
                            <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
                            <validate-on-match>false</validate-on-match>
                            <background-validation>false</background-validation>
                            <use-fast-fail>false</use-fast-fail>
                            <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
                            <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
                        </validation>
                    </datasource>
                    <drivers>
                        <driver name="oracle" module="com.oracle.jdbc">
                            <xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
                        </driver>
                    </drivers>
                </datasources>
            </subsystem>
    If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed.

  • Backing up primary and physical standby

    We have a DG setup with a single instance primary node and a physical standby db. They both use their own FRA's and their own disks. Nothing is shared. Also the datafiles use OMF on both the db's. My questions are
    1. Can i register the primary with the rman catalog and still backup the standby?
    2. Should i backup the archive logs on primary? If so what rman settings should i use on both for the archive logs?
    3. We wanted to back up both the dbs as it will be faster to restore since we wont have to convert filenames (cause of OMF) when we have to resotore backup taken on primary to standby or vice versa.
    Any advise related to this scenario is highly appreciated.
    Thanks.

    Hi All,
    you should have same rman format setting and log_archive_format on primary and standby database >to avoide any confusion at the time of restore. if you have different log_archive_format on standby then >primary, you might have to rename your archivelogs from standby to log_archive_format on primary.It is not required to have same log_archive_format for primary and standby database.
    The database can be restored and recovered successfully even if the format is different.
    Primary database
    ============
    SYS @ oraprim> show parameter log_archive_format
    NAME TYPE VALUE
    log_archive_format string ARC%S_%R.%T
    Standby database
    =============
    SYS @ orastdby> show parameter log_archive_format
    NAME TYPE VALUE
    log_archive_format string ARC_STDBY%S_%R.%T
    Standby database
    =============
    C:\> set ORACLE_SID=orastdby
    C:\>rman target / catalog recat/recat@recat
    RMAN> backup archivelog all delete input;
    channel ORA_DISK_1: starting archive log backupset
    channel ORA_DISK_1: specifying archive log(s) in backup set
    input archive log thread=1 sequence=98 recid=15 stamp=631239054
    input archive log thread=1 sequence=99 recid=16 stamp=631239055
    input archive log thread=1 sequence=100 recid=17 stamp=631239055
    input archive log thread=1 sequence=101 recid=19 stamp=631239111
    input archive log thread=1 sequence=102 recid=18 stamp=631239110
    channel ORA_DISK_1: starting piece 1 at 22-AUG-07
    channel ORA_DISK_1: finished piece 1 at 22-AUG-07
    piece handle=C:\FLASH_RECOVERY_AREA\ORASTDBY\BACKUPSET\2007_08_22\O1_MF_ANNNN_TAG20070822T001717_3DQG6HGS_.BKP
    tag=TAG20070822T001717 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
    channel ORA_DISK_1: deleting archive log(s)
    archive log filename=C:\ORADATA\ORASTDBY\ARCH2\ARC_STDBY00098_0630878042.001 recid=15 stamp=631239054
    archive log filename=C:\ORADATA\ORASTDBY\ARCH2\ARC_STDBY00099_0630878042.001 recid=16 stamp=631239055
    archive log filename=C:\ORADATA\ORASTDBY\ARCH2\ARC_STDBY00100_0630878042.001 recid=17 stamp=631239055
    archive log filename=C:\ORADATA\ORASTDBY\ARCH2\ARC_STDBY00101_0630878042.001 recid=19 stamp=631239111
    archive log filename=C:\ORADATA\ORASTDBY\ARCH2\ARC_STDBY00102_0630878042.001 recid=18 stamp=631239110
    Finished backup at 22-AUG-07
    RMAN>
    Primary Database
    =============
    -- deleted users datafile and did complete recovery
    C:\>set ORACLE_SID=oraprim
    C:\>rman target / catalog recat/recat@recat
    RMAN> run{
    2> startup mount;
    3> restore database;
    4> recover database;
    5> }
    Oracle instance started
    database mounted
    channel ORA_DISK_1: starting archive log restore to default destination
    channel ORA_DISK_1: restoring archive log
    archive log thread=1 sequence=98
    channel ORA_DISK_1: restoring archive log
    archive log thread=1 sequence=99
    channel ORA_DISK_1: restoring archive log
    archive log thread=1 sequence=100
    channel ORA_DISK_1: restoring archive log
    archive log thread=1 sequence=101
    channel ORA_DISK_1: restoring archive log
    archive log thread=1 sequence=102
    channel ORA_DISK_1: reading from backup piece C:\FLASH_RECOVERY_AREA\ORASTDBY\BACKUPSET\2007_08_22\O1_MF_ANNNN_TAG20070822T001717_3DQG6HGS_.BKP
    channel ORA_DISK_1: restored backup piece 1
    piece handle=C:\FLASH_RECOVERY_AREA\ORASTDBY\BACKUPSET\2007_08_22\O1_MF_ANNNN_TAG20070822T001717_3DQG6HGS_.BKP tag=TAG20070822T001717
    channel ORA_DISK_1: restore complete, elapsed time: 00:00:04
    archive log filename=C:\ORADATA\ORA10GR2DB1\ARCH2\ARC00098_0630878042.001 thread=1 sequence=98
    archive log filename=C:\ORADATA\ORA10GR2DB1\ARCH2\ARC00099_0630878042.001 thread=1 sequence=99
    archive log filename=C:\ORADATA\ORA10GR2DB1\ARCH2\ARC00100_0630878042.001 thread=1 sequence=100
    media recovery complete, elapsed time: 00:00:07
    Finished recover at 22-AUG-07
    RMAN>
    Regards,
    Vaibhav

  • Data guard synchronization after link down b/w primary and physical standby

    Hi All,
    I have configured data guard on oracle 11gr2 db. Normally switchover between my primary and physical standby happens smoothly and the Apply lag would be zero. Recently We had to test a scenario when the network link between Primary and Physical standby is completely down and Physical standby is isolated completely for more than half an hour.
    When we brought up the link every thing worked smoothly but apply lag started increasing from 0 to around 3 hrs. And then it started reducing to 0. Currently Apply lag and transport lag shows 0.
    But is this normal behaviour of oracle data guard that when the link between primary and physical standby is completely down, It requires 3-4 hrs for resynchronization ??? Even when during isolation, there were very few transactions happend on primary database ??
    Are there any documents available for this scenario??
    Thanks

    Hi, after the link is up, if there were some transactions and produced archive logs it's normal to take some time for resync. To check if 3-4 hours is normal or not, you can repeat the scenario and this time check
    - how many archivelogs does primary produce in this period.
    - after the link is up, does archivelog transfer immediately starts from primary to standby? Is primary able to send these archivelogs parallel?
    - Is there anything wrong with the apply process?
    check primary & standby alert log files, and run this query on standby to check the transport and apply processes:
    SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
    regards

  • Cssd does not start in non-RAC environment Thus we can not bring up ASM

    Non-RAC environment
    ASM version = 11.1.0.7
    HP-UX Itanium 11.23
    After power outage, CSSD does not start on non-RAC environment
    Running as root "/sbin/init.d/init.cssd start" does not start cssd
    Oracle support tried "$ASM_HOME/bin/localconfig delete" and "$ASM_HOME/bin/localconfig add"
    but it did not start CSS
    Oracle support tried "$ASM_HOME/bin/localconfig reset $ASM_HOME"
    It started the CSSD and the "crsctl check css" came back with CSS is healthy
    But around 1 minute later it rebooted the server and when it came up again CSS does not start.
    They checked /etc/inittab and it looked fine.
    Before the reboot we saw this message in the /var/adm/syslog/OLDsyslog.log:
    Cluster Ready Services completed waiting on dependencies
    Again it is a NON-RAC environment. We only need CSSD for ASM. We do not have CRS installed on this server.
    Our test system has been down for a week and we did not get the resolution from Oracle support yet !
    Any pointers are greately appriciated.
    Thanks,
    Dzung

    Here is the message in $ASM_HOME/log/<hostname>/alert<hostname>.log :
    2010-07-16 09:42:02.956
    [client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
    ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
    2010-07-16 09:42:02.971
    [client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
    ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
    2010-07-16 09:42:03.054
    [client(11930)]CRS-1013:The OCR at /db/app/oracle/product/11.1/cdata/localhost/local.ocr was successfull
    y formatted using version 2. Ignore earlier CRS-1006 messages if any.
    2010-07-16 09:42:46.379
    [cssd(12297)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rmodbd01 .
    Here is the message in $ASM_HOME/log/<hostname>/cssd/cssdOUT.log:
    setsid: failed with -1/1
    s0clssscGetEnvOracleUser: calling getpwnam_r for user oracle
    s0clssscGetEnvOracleUser: info for user oracle complete
    07/16/10 09:42:36: CSSD starting
    Here is the message in $ASM_HOME/log/<hostname>/cssd/ocssd.log:
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 7, from 6, changes 6
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmSetVersions: properties common to all peers: 1,2,3,4,5,6,7
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmEstablishMasterNode: MASTER for 174732166 is node(0) birth(174732166)
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 8, from 7, changes 7
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 9, from 8, changes 8
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 10, from 9, changes 9
    [    CSSD]CLSS-3000: reconfiguration successful, incarnation 174732166 with 1 nodes
    [    CSSD]CLSS-3001: local node number 0, master node number 0
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssscSAGEInitFenceCompl: Completing kgzf fence initialization
    [    CSSD]2010-07-16 09:42:46.394 [12] >TRACE: clssgmUpdateEventValue: Client listener incarn val 174732166, changes 1
    [    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c7120) allocated
    [    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c73a0) allocated
    [    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user oracle
    [    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user root
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7120 - 1,2,3
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2810) proc(60000000003c7120) pid(12350) version 11:1:1:4
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c73a0 - 1,2,3
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c73a0) pid(12131) version 11:1:1:4
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(1/600000000096e7c0)
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e7c0)
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmJoinGrock: local grock CSS_INTERNAL_NODE_GROUP new client 600000000096e7c0 with con 60000000003b2b10, requested num 0
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmAddNodeGrpMember: member (60000000009e0030) added
    [    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
    [    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
    [    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDeadProc: proc 60000000003c73a0
    [    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c73a0) con(60000000003b2990) skgpid ospid 12131 with 0 clients, refcount 0
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of unknown group MASTER#DISKMON#GROUP
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of group MASTER#DISKMON#GROUP, member count 0
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: KGZF: context successfully initialized, API version 1.4, using pipe default
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssscSAGEInitFenceCompl: kgzf fence initialization successfully completed
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: CSS/GM open for global group registrations
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: completed for reconfig(174732166), with status(1)
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmUpdateEventValue: Reconfig Event val 2, changes 2
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmWaitOnEventValue: after Reconfig Event val 2, eval 2 waited 47
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(2/600000000096e870)
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmUpdateEventValue: Reconfig Event val 0, changes 3
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmStartNMMon: previous reconfig complete, incarnation(174732166)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP#MX new client 600000000096e870 with con 60000000003b2990, requested num -1
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP#MX
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/MASTER#DISKMON#GROUP#MX)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmQueueGrockEvent: lockName(MASTER#DISKMON#GROUP#MX) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmCommonAddMember: global lock grock MASTER#DISKMON#GROUP#MX member(0/Local) node(0) flags 0x2 0x2
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(3/600000000096e920)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 3 (600000000096e920)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP new client 600000000096e920 with con 60000000003b2bd0, requested num 0
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: new master 0 for group(MASTER#DISKMON#GROUP)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group MASTER#DISKMON#GROUP, death 1, SAGE 0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: member (0/60000000009e0230) added. pbsz(72) prsz(0) flags 0x0 to grock (600000000098a170/MASTER#DISKMON#GROUP)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmQueueGrockEvent: groupName(MASTER#DISKMON#GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x78, state 0x0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmCommonAddMember: global group grock MASTER#DISKMON#GROUP member(0/Local) node(0) flags 0x0 0x1e00
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock MASTER#DISKMON#GROUP#MX, member 0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock MASTER#DISKMON#GROUP#MX
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmRemoveMember: grock MASTER#DISKMON#GROUP#MX, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
    [    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:58.354 [12] >TRACE: clssgmAllocProc: (60000000003c7ee0) allocated
    [    CSSD]2010-07-16 09:43:58.355 [14] >TRACE: Connect request from user oracle
    [    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7ee0 - 1,2,3
    [    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c7ee0) pid(13157) version 11:1:1:4
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(1/600000000096e870)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_GROUP new client 600000000096e870 with con 60000000003b2c90, requested num -1
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_GROUP
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: new master 0 for group(CLSSSCHECK_GROUP)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group CLSSSCHECK_GROUP, death 1, SAGE 0
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: member (0/60000000009e0130) added. pbsz(8) prsz(8) flags 0x0 to grock (6000000000989e50/CLSSSCHECK_GROUP)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmQueueGrockEvent: groupName(CLSSSCHECK_GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x0, state 0x0
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmCommonAddMember: global group grock CLSSSCHECK_GROUP member(0/Local) node(0) flags 0x0 0x0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 1 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 1 (600000000096e870), grock CLSSSCHECK_GROUP, member 0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_GROUP
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_GROUP, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 2
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(2/600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_LOCK new client 600000000096e870 with con 60000000003b2c90, requested num -1
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_LOCK
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/CLSSSCHECK_LOCK)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmQueueGrockEvent: lockName(CLSSSCHECK_LOCK) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmCommonAddMember: global lock grock CLSSSCHECK_LOCK member(0/Local) node(0) flags 0x2 0x2
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock CLSSSCHECK_LOCK, member 0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_LOCK
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_LOCK, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
    [    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDeadProc: proc 60000000003c7ee0
    [    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c7ee0) con(60000000003b2990) skgpid ospid 13157 with 0 clients, refcount 0
    [    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/client.log:
    [ DISKMON] 07/16/2010 18:33:32.050 dskm_send_command: process 23246 sending command 8 to master diskmon listening on default pipe
    [ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: skgznp_connect failed with error 56815
    [ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: error 56815 at location skgznpcon6 - connect() - Connection refused
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmonOUT.log:
    setsid: failed with -1/1
    dskm_getenv_oracle_user: calling getpwnam_r for user oracle
    dskm_getenv_oracle_user: info for user oracle complete
    07/16/10 18:33:31: Master Diskmon starting
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmon.log:
    [ DISKMON] 07/16/2010 09:42:35.573 dskm main: starting up
    [ DISKMON] 07/16/2010 09:42:35.588 [12350:3] dskm_rac_thrd_main: running
    [ DISKMON] 07/16/2010 09:42:35.588 [12350:1] dskm_rac_thrd_creat2: got the post from the css event handling thread
    [ DISKMON] 07/16/2010 09:42:35.589 [12350:1] dskm main: startup complete
    [ DISKMON] 07/16/2010 09:42:35.589 [12350:1] listening on -> default pipe
    [ DISKMON] 07/16/2010 09:42:35.792 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:36.385 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:36.906 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:37.426 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:37.945 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:38.465 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:1] dskm_slave_thrd_creat: thread created
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_slave_thrd_main1: slave 0 running
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_process_msg5: received msg type KGZM_IDENTIFY (0x0001)
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_identify8: client kgzf/12297, version 0x01020000, slave 0, reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=0,gin=0,gmn=0,umemid=0,opid=0,opsn=0,lvl=node
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version1:
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version4: done
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_IDENTIFY (0x0001), retcode 0
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg5: received msg type KGZM_KGZF_HANDSHAKE (0x0010)
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_kgzf_handshake3: client kgzf/12297, kgzf version 0x00010004, slave 0
    [ DISKMON] 07/16/2010 09:42:46.401 [12350:3] dskm_clss_ini2: successful clsssinit(), clssvers 2.1
    [ DISKMON] 07/16/2010 09:42:46.402 [12350:3] dskm_clss_ini12: node rmodbd01 (0) registered in cluster
    [ DISKMON] 07/16/2010 09:42:46.403 [12350:3] dskm_reid_ini12: diskmon reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=-1,gin=-1,gmn=-1,umemid=-1,opid=12350,opsn=1279291355,lvl=process
    [ DISKMON] 07/16/2010 09:42:46.424 [12350:3] dskm_sage_config: CELL storage configuration file cellinit.ora not found
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:3] dskm_nfy_kgzf1: notified thread kgzf enabled
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake5: got the post from the hb thread
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake9: done, kgzf enabled
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_KGZF_HANDSHAKE (0x0010), retcode 0
    [ DISKMON] 07/16/2010 09:42:46.426 [12350:3] dskm_rac_ini22: CELL storage not configured in the cluster; registered in group MASTER#DISKMON#GROUP as memno 0 (GSDGRPSZ 512)

  • Upgrade from 10.2.0.1 32bit to 10.2.0.4 64bit windows

    This scenario i have planned to make an attempt of my own..
    1) Plan to Migrate existing database from ( 10.2.0.1 ) 32bit to (10.2.0.4) 64bit database
    2)Existing DB is No archive mode,
    3)OS windows server 2003 Enterprise sp 2(32 bit)
    Migrate DB config
    1)Os windows server 2008 Enterprise 64 bit
    I need help from oracle gurus!!! how to migrate existing DB Upgrade from 10.2.0.1 32bit to 10.2.0.4 64bit windows
    1)how to take backup?
    2)how to upgrade oracle version?
    3)proper step to follow completed this task successful
    For database migration and upgrade activity...
    share your suggestions please
    Regards,
    Venk@t

    How big is the database ? How much downtime can you afford ? One option is to install 10.2.0.1 on the target, apply the 10.2.0.4 patch, create an empty instance on target, then export the database from the source and import into target.
    Pl be aware that 10.2.0.1 thru 10.2.0.4 are on sustaining support and 10.2.0.5 is on extended support (if you have paid the extended support fees). Why not upgrade to 11gR2 ?
    HTH
    Srini

  • Replicate from primary to logical standby

    We are considering a logical standby, but have three tables with an XMLTYPE datatype. We have successfully set up a bi directional streams environment, with advanced replication also handling those tables that streams cannot (such as those already noted).
    However, when we try to setup advanced replication on the primary and logical standby, adding a master database at the logical standby hangs with AWAIT_CALLBACK from the standby. We turned off the guard, SKIPPED apply on the replication schema, but it still hangs.
    Is this by design (it does seem odd to replicate to a standby database, I know :)), or is this completely impossible, or are we missing something? Will we have to use Streams to accomplish this, rather than a logical standby (built on top of streams?)
    Thanks!
    Steve

    sequences are stored and administrated in a datadictionary table.
    The dictionary is 'replicated'.
    What is your exact problem?
    Sybrand Bakker
    Senior Oracle DBA

Maybe you are looking for

  • Problems after amber update in my lumia 520

    I have updated my lumia 520. After it there is regular fluctuation in my internet connection even my data setting is on and battery is also discharging quickly after update.

  • Move plotting to inside a while-loop

    Hi I have a plot that occurs outside a whileloop, and another that is constructed inside the whileloop. How do I get the plots to run synchronously in the same waveform chart? I've tried looptunnels, I've tried shiftregisters but neither solves it. B

  • When I bookmark a page, the wonderfully imported folders and bookmarks I see when I clik bookmarks do not appear in any of the 3 optional dropdowns?

    I really want to help you make Mozilla the best of them all, so here goes: When I want to bookmark a page, those wonderfully imported IE favorites I see in the dropdown when I clik Bookmarks...do no appear? Now...at the bottom of the bookmarks dropdo

  • Second License installation issue

    I am trying to install my second license for CS5 and it is telling me that I am already booked up on two computers. This is impossible as I only had one computer until yesterday. Adobe, how does this get fixed? I don't want to deactivate the account

  • Won't reinstall OS. Ejecting Disks.

    Hey everyone! I've been stumped on this question for a few months now and am dying to get my computer up and running again! My 4 year old Powerbook wasn't booting and disk utility kept finding problems. Luckily I backed up my hard drive a few weeks e