RMAN error when backing up in another server

I have 2 server prod and backprod. I don't have a sufficient space to run rman backup on the production server and I try to run rman in the backprod server and I receive the following error message.
$rman target sys/sys@prod nocatalog;
RMAN> run {
allocate channel d1 type disk;
BACKUP format '/data2/backup/bk_%s_%p_%t' TABLESPACE test_rman;
release channel d1;
allocated channel: d1
channel d1: sid=73 devtype=DISK
Starting backup at 02-MAY-07
channel d1: starting full datafile backupset
channel d1: specifying datafile(s) in backupset
input datafile fno=00101 name=/data5/abillity/telma/test_rman_01.dbf
channel d1: starting piece 1 at 02-MAY-07
released channel: d1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on d1 channel at 05/02/2007 09:54:58
ORA-19504: failed to create file "/data2/backup/bk_288_1_621510902"
ORA-27040: skgfrcre: create error, unable to create file
IBM AIX RISC System/6000 Error: 2: No such file or directory
The directory /data2/backup exist in backprod and I have a right on this backprod.
Any helps?

I can create a file in this directory.
This directory doesn't exist on the prod server but I want that the file backup reside in backprod.
When I try to run the backup on windows server, there was no error message but the file backup is create on the prod server in a default directory $ORACLE_HOME/dbs.
What should I to create this backup file on a remote machine?
Regards

Similar Messages

  • Rman error when i am doing backup archivelog delete input

    archive log filename=+FRA01/osondemand/archivelog/2012_02_27/thread_2_seq_15028.7182.776323223 recid=122876 stamp=77
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on ORA_DISK_2 channel at 02/27/2012 05:23:14
    RMAN-10015: error compiling PL/SQL program
    RMAN-10033: error during compilation of job step 3: ORA-00603: ORACLE server session terminated by fatal error
    ORA-04030: out of process memory when trying to allocate 272 bytes (PL/SQL DIANA,PTG: No
    10.2.04
    windows
    two node rac
    please help me with above error
    thanks for help

    Hi;
    Duplicate post:
    rman error when taking backup archivelog all delete input
    Please close your othere thread as answered and keep updating your other thread here
    Regard
    Helios

  • Rman error when taking backup archivelog all delete input

    archive log filename=+FRA01/osondemand/archivelog/2012_02_27/thread_2_seq_15028.7182.776323223 recid=122876 stamp=77
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on ORA_DISK_2 channel at 02/27/2012 05:23:14
    RMAN-10015: error compiling PL/SQL program
    RMAN-10033: error during compilation of job step 3: ORA-00603: ORACLE server session terminated by fatal error
    ORA-04030: out of process memory when trying to allocate 272 bytes (PL/SQL DIANA,PTG: No
    10.2.04
    windows
    two node rac
    please help me with above error
    thanks for help

    Hi;
    Duplicate post
    Re: rman error when i am doing backup archivelog delete input
    Regard
    Helios

  • JVM Initialization Error when Starting the Second Managed Server

    Hi,
    I am getting the below error when starting the 2nd Managed server on Solaris X86 machine.
    starting weblogic with Java version:
    java version "1.5.0_17"
    Java(TM) Platform, Standard Edition for Business (build 1.5.0_17-b04)
    Java HotSpot(TM) Client VM (build 1.5.0_17-b04, mixed mode, sharing)
    Starting WLS with line:
    /usr/jdk/instances/jdk1.5.0/bin/java -client -Xms256m -Xmx512m -XX:CompileThre shold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -da -Dplatform .home=/beafiler/weblogic10g/bea/wlserver_10.0 -Dwls.home=/beafiler/weblogic10g/b ea/wlserver_10.0/server -Dweblogic.home=/beafiler/weblogic10g/bea/wlserver_10.0/ server -Dwli.home= -Dweblogic.management.discover=false -Dweblogic.management.s erver=http://test_admin:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false - Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/beafiler/weblogic10g/bea/patch_wss 110/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patch_w lw1021/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patc h_wls1002/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/p atch_cie640/profiles/default/sysext_manifest_classpath -Dweblogic.security.provi ders.authentication.LDAPDelegatePoolSize=50 -Dweblogic.Name=wls_test2 -Djava.sec urity.policy=/beafiler/weblogic10g/bea/wlserver_10.0/server/lib/weblogic.policy weblogic.Server
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Can any one please help me troubleshoot this?
    Edited by: user4877326 on Jul 13, 2010 1:33 PM

    Hi P.k,
    The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
    What is GTC resource?
    OIM version - 11.1.1.5.0.
    -Deena.

  • Error when sending message: 500 Internal Server Error

    Hi
    IE is not accepting any messages,
    when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
    following things what i have noticed.
    1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the  IE admin) URL is  "http://<host>:8000/sap/xi/engine?type=entry"
    2. SICF all the XI serivess are up and running, i am able to test these service.
    3. The http port is active ( SMICM )
    Pls note the error is  500 Internal Server Error  
    regards
    Nisar

    I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
    This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
    1 Check Table Space is enough. ---i had installed server recently & very few interface running.
    2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
    3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
    Try restart the java stack(XI Server) and follwing services.
    com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
    com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
    basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
    regards
    Nisar

  • 261 error when backing up just purchases

    261 error when backing up just purchases I should not be getting this error if the problem is with playlist with the wrong characters in them, I am backing up just purchases.
    Thanks In advance Krisal
    Gateway Pentium 4   Windows XP   Using DVD and CD

    Help! I received the same error.
    Acer laptop   Windows Vista   1 GB RAM

  • Fatal error when trying to backup SharePoint server (Failed to set request to pause search application)

    I have powershell script that is used to backup SharePoint server. It was working correctly until last week. I found this error message indicate that search application cannot be paused. I don't know what happen and what should I do to solve this issue.
    Please help me find solution for this.
    [20/1/2557 18:53:53] FatalError: Object Search Service Application failed in event OnBackup. For more information, see the spbackup.log or sprestore.log file located in the backup directory.
    InvalidOperationException: Failed to set request to pause search application

    Hi,
    According to your post, my understanding is that you got an error when you backup your SharePoint Server.
    You can do the steps below, then check whether it works.
    Look for any One-time timer job  for Backup/Restore and delete it (From Central Administration > Monitoring > Review Job Definitions)
    Clear the timer cache following the below link:
    http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
    Run the below command from the SharePoint Management Shell:
    $ssa = Get-SPEnterpriseSearchServiceApplication –Identity <SearchServiceApplicationName>
    Suspend-SPEnterpriseSearchServiceApplication -Identity $ssa
    Once the above steps are completed successfully start the full farm backup from the Central Administration > Backup and Restore > Farm Backup
    Once backup is completed run the below command to resume the SSA
    $ssa = Get-SPEnterpriseSearchServiceApplication –Identity <SearchServiceApplicationName>
    Resume-SPEnterpriseSearchServiceApplication -Identity $ssa
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Errors when backing to tape ORA-19624 ORA-19511

    Hi,
    We got an error yesteday when backing u to tape, this happens very rarely but following is the message
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-10035: exception raised in RPC: O
    RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
    RMAN-10035: exception raised in RPC: O
    RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
    RMAN-10035: exception raised in RPC: O
    RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
    RMAN-03015: error occurred in stored script BGT2_BSBGPRD1_HOTBCK_DY
    RMAN-03007: retryable error occurred during execution of command: backup
    RMAN-07004: unhandled exception during command execution on channel ch1
    RMAN-10035: exception raised in RPC: ORA-19502: write error on file "db_BSBGPRD1_98108_1_667503967", blockno 4323713 (blocksize=512)
    ORA-27030: skgfwrt: sbtwrite2 returned error
    ORA-19511: VxBSASendData: Failed with error:
    Server Status: Communication with the server has not been iniatated or the server status has not been retrieved from the server.
    RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
    any suggestions
    Kedar

    Hi,
    If I check in TOAD, then I see that the max size of the tablespace is unlimited. Btw, Tablespace XYZ is actually an index tablespace - dont know if this makes a difference. The max size of the data tablespace is also unlimited.
    Using the query select * from user_ts_quotas or dba_ts_quotas, I dont see tablespace XYZ or its data tablespace in this result set. I'm not sure why.
    Maybe giving the user unlimited quota on the tablespace might solve the problem - i dont know, but if it does, then I have to ask why has it worked all the time without this and only now it's giving an error??
    The user has been doing the same thing everyday for the past couple of years and only now getting this error.

  • Error when running "J2ee SDK" -  j2ee server

    Hi,
    When running: C:\j2sdkee1.3.1\bin>j2eeadmin I get the follwoing error:
    Binding: < JMS Cnx Factory : TopicConnectionFactory ,
    Binding: < JMS Cnx Factory : QueueConnectionFactory ,
    Starting web service at port: 8000
    Starting secure web service at port: 7000
    J2EE SDK/1.3.1
    LifecycleException: null.open: java.net.BindExcepti
    JVM_Bind
    at org.apache.catalina.connector.http.HttpCon
    ctor.java:1116)
    at org.apache.catalina.startup.Embedded.start
    at com.sun.web.server.WebService.start(WebSer
    at com.sun.web.server.WebServer.start(WebServ
    at com.sun.enterprise.server.J2EEServer.start
    796)
    at com.sun.enterprise.server.J2EEServer.run(J
    at com.sun.enterprise.server.J2EEServer.main(
    java.lang.RuntimeException: null.open
    at com.sun.enterprise.server.J2EEServer.run(J
    at com.sun.enterprise.server.J2EEServer.main(
    J2EE server reported the following error: null.open
    Error executing J2EE server ...
    Please advise.
    Thanks,
    Gabi

    405 errors in the HTTP cycle
    Any client goes through the following cycle:
    * Obtain an IP address from the IP name of your site (your site URL without the leading 'http://'). This lookup (conversion of IP name to IP address) is provided by domain name servers (DNSs).
    * Open an IP socket connection to that IP address.
    * Write an HTTP data stream through that socket.
    * Receive an HTTP data stream back from your Web server in response. This data stream contains status codes whose values are determined by the HTTP protocol. Parse this data stream for status codes and other useful information.
    This error occurs in the final step above when the client receives an HTTP status code that it recognises as '405'.
    Resolving 405 errors - general
    405 errors often arise with the POST method. You may be trying to introduce some kind of input form on your Web site, but not all ISPs allow the POST method necessary to process the form.
    All 405 errors can be traced to configuration of the Web server and security governing access to the content of the Web site.

  • Error when installing to a new server

    I get the following error when attempting to install SunOne 6.1 SP2:
    ERROR: The directory /drivelocation/SunWebSrv already exists and might contain pre-4.0 Sun ONE servers. Installing into an existing pre-4.0 server root is not supported. Choose another server root.
    The server is a new server without any existing versions of iPlanet or SunOne installed on the server. The location we are attempting to install to is its own drive mount on the Solaris system with only the directory "lost+found" located in the folder. Does anyone have an idea as to why this is happening or know of a possible workaround for this?
    Thanks!

    The problem is that you're trying to install to a non-empty directory. Web Server requires its own directory all to itself. Either remove the lost+found directory before starting the installer or tell the installer to install to a subdirectory.

  • Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1

    Hi
    I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
    Admins" and "Schema Admins"
    in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
    I have to install exchange 2013 in windows Server 2008 r2 sp1
    the functional level  2008 R2 I getting these errors please help.
    Errors:
    This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
    Error:
    A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
    Error:
    There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
    Error:
    You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
    Error:
    Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.  See the Exchange setup log for more
    information on this error.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
    Error:
    Either Active Directory doesn't exist, or it can't be contacted.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx

    I think it's from subnet in site and services
    have 3 site A,B,C and new site is  "D"I have problem in "D" site
    A subnet is 10.33.50.0/24  AD 2012 ,exchange 2013
    B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
    C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
    D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
    find event error
    The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
    the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    test-SetupPrerequisites
    {Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
    Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
    or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
    Cafe}}

  • Error when starting Sun ONE Web Server 6.1SP4 after successful installation

    I have installed Sun ONE Web Server 6.1SP4 on my Solaris computer and I receive the following error when I try to start the Admin server:
    Sun ONE Web Server 6.1SP4 B01/20/2005 17:43
    failure: CORE3170: Configuration initialization failed: Error running init funct
    ion load-modules: dlopen of /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so failed
    (ld.so.1: webservd: fatal: relocation error: file /opt/SUNWwbsvr/bin/https/lib/
    libares3.so: symbol __res_state: referenced symbol not found)
    I am running Solaris 8 and I have installed Patch 108993-22 as stated in chapter 2 of the installation and migration guide. I have also installed patches 116602-01, 115827-01, 113648-03, 112396-02, 111317-05, 111310-01, 111111-04, 111023-03, 110386-03, 108987-15, and 108528-24 since they are necessary for patch 108993-22.
    I have been stumped by this error. I have tried several different ways to install this software but I always get the same error. I believe that I have the latest version of the Sun One Web Server and I received no error notifications when I installed it! Any help would be apeciated!
    Thanks!!!!!

    I think this might occur if you don't have the patch for SunAlert 46042 installed. There's more information on this critical Solaris security vulnerability, which was reported back in 2002, at http://sunsolve.central.sun.com/search/document.do?assetkey=1-26-46042-1
    Can you run the following command to check if you have patch 109326-09 installed and let us know the result?showrev -p | grep 109326If you don't have 109326-09 or higher installed, you should install it as soon as possible. You can follow the link from the SunAlert. Better yet, install the latest Solaris 8 recommended patch cluster from http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access to make sure your system is fully patched and up to date.

  • Error when viewing documents from content server

    hi all,
    I have a question.
    we have installed an SAP Content Server on Windows 2003 server, and have connected it to our SAP ECC 5.00 ERP.  The purpose is so that documents that are attached to a transaction (through Generic Objects Services - Create Attachment), get stored onto the content server rather than the SAP database.  We have done all the necessary configuration in oac0, oact, and SKPR08.  We are able to attach a document to the transaction, and it gets stored onto the content server.  Our issue is when viewing the attachment. 
    This is the error we are getting as soon as we try to view the attachment:
    "Windows cannot find c:\documents and settings\<username>\SAPWorkDir\<filename>.  Make sure you typed the name correctly, and then try again.  To search for a file, click the Start button, and then click Search."
    After pressing OK to the message, the system then gives this error:
    "File could not be exported
    Message no. SO315
    Diagnosis
    You have selected either the Export function or a PC document to be exported from the system. The file could not be exported to the
    PC. Possible reasons:
    1. The file is already open and is being used by an application.
    2. The directory to which the file is to be exported is write-protected.
    Procedure
    In the first case, close the application.
    In the second case, remove the write-protection attribute from the directory or enter another directory."
    Why is the system trying to open the file from the user's C:\ drive?
    Does anyone have a solution to this error?
    Cheers,

    Hi Aleem,
    Refer to below KB & note, this should help you.
    1849203 - Error message Database error for <GET DATA FROM KPRO> (SO013) and/or File could not be exported (SO315) when opening a document in Attachment list
    764972 - Errors when creating workflow attachment
    Regards,
    Ravi

  • Eclipse oepe error when creating weblogic 10.3 server

    Hi. (Hopefully this is the correct forum for Eclipse/oepe issues.)
    When defining a new Weblogic server, I get the following error from the wizard upon entering the domain.
    The server is invalid. Error occurred reading server credential. If the domain was recreated, the server instance in Workshop must also be recreated. Required classpath for credential detection is missing. Detection is disabled.
    This happens regardless if I setup a new domain, or point it to the sample *...10.3/samples/domains/wl_server*.
    Please advise.
    Thanks
    nat

    Got it!
    On my system I have several partitions with /tmp on one, and /opt which holds all my developer stuff on another.
    Several Java programs have a problem (bug) attempting to move a file from /tmp to target, when target happens to be on another partition. (Depending on how the move is done.)
    Several Eclipse modules also have this problem. https://bugs.eclipse.org/bugs/show_bug.cgi?id=239396
    Also explained here. http://forums.java.net/jive/thread.jspa?threadID=45011&tstart=0
    (The OC4J team is well aware of this, since upon deploying an ejb project OC4J console displays something like "Can't move file from tmp, will COPY it instead.")
    Today I tried a fresh install of WLS 10.3 and of OEPE to a new directory on the same partition as /tmp.
    Voila! Everything works. It seems like the WLS installer and/or new domain wizard are bitten by this.
    nat

  • "View failed to load" error when I open Resources - Project Server 2013

    Hello,
    I get the following error when I open the Resources Page (I am using Project Server 2013):
    "The view failed to load. Press OK to reload this view with the default settings. Press Cancel to select another view"
    Help please.

    Hi,
    Is your environment up to date with the latest SP/CU?
    HAve you tried selecting another view?
    See those hotfix : 
    http://support.microsoft.com/kb/2760261/en-us
    http://support.microsoft.com/kb/2863881/en-us
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

Maybe you are looking for

  • Problems Installing Acrobat Pro 9.0 after Hard Drive Crashed

    I am having to reinstall my Creative Suite CS 5.0 on my MacBook Pro after the replacement SSD crached and I had to reinstall the suite back onto my orginal hard drive. Everything in the Creative Suite installs with no problem except Acrobat Pro 9.0 a

  • Streaming games from imac osx10.4 to tv

    Bought new imac, love it (09/07). Bought my daughter a couple of imac games for Christmas, any way to stream them to a tv, even by cables? (Games were Diner Dash and Guitar Hero III). Hope you all have a great Holiday Season. Dan

  • Location of MobileSync folder

    i had to run whatsize again to figure out what my 250 GB hard drive is being spent on and i see once again that i have 25 GB in my MobileSync folder. i would like to put an alias of this folder on my desktop so i can empty it periodically but i can't

  • Grey Screen Crashes/In 4 different languages

    I've been experiencing frequent grey screen crashes and I have to re-install the system software to restart my machine. What are the reasons for this crash? I need direction to solve this problem. Machine does this while using Adobe CS, InDesign most

  • Acrobat X Text Editing

    Hi, We upgraded from Acrobat 7 to X.  Now documents that we used to be able to use text editing on we no longer can.  We get an error message about embedded fonts.  Not certain how the old version could perform text editing but the new version can't.