Roaming profile not working anymore

hi
im definitely shure, in a earlier version of ZCM 10.0, the Roaming Profile to the Home directory did work and so, i never checked this since then.
now i updated to 10.3.1 and roaming profile does not work anymore. the local profile gets not copied to the Home-Directory on the server, it doesnt depends, if i have the "Edir Home" set or the real path to the directory.....
where can i start to search for this problem ? i was so shortly to go "productiv".......but no, there is again a delay after 6 Months waiting and testing....:-(
it's so sad ! Zenworks is not that quality product it was.....
Sascha

hi craig
sorry, about not enough informations.....
- no, all clients are only in the E-Dir
- Clients are Windows XP SP2 with Novell Client 4.9 SP2, but tested also higher ones...
- Home-directory is on a Netware 6.5 SP8
- ZCM Server is SLES 10 SP3 without OES
thanks
Sascha
>>> craig wilson<[email protected]> 27.08.2010 17:36 >>>
Are your devices a member of a Windows Domain?
What Client OS?
What type of Server do the Home Directories reside?
On 8/27/2010 11:17 AM, Sascha Oetiker wrote:
> hi
> im definitely shure, in a earlier version of ZCM 10.0, the Roaming
> Profile to the Home directory did work and so, i never checked this
> since then.
> now i updated to 10.3.1 and roaming profile does not work anymore. the
> local profile gets not copied to the Home-Directory on the server, it
> doesnt depends, if i have the "Edir Home" set or the real path to the
> directory.....
> where can i start to search for this problem ? i was so shortly to go
> "productiv".......but no, there is again a delay after 6 Months waiting
> and testing....:-(
> it's so sad ! Zenworks is not that quality product it was.....
> Sascha
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

Roaming profiles not working from time to time

We have 6 Terminal servers and at random on the servers and at random with the users, the roaming profile will not be delete after the users log off.
The folder that remains in the user folder, this folder however is empty, not even hidden folders or files are present: C:\Users\"username"\AppData\LocalLow\Microsoft\CryptnetUrlCache
What we have tried is to run a log off script that has following in it "net stop CryptSvc" but this also does not work. We have had 6 users again today that had the problem. All on different servers.
We can manually delete the users folders without any problems when the problem occurs but this is not something that we would like to do every day.
I see a lot of similar problems but nowhere a real solution for this.
Ah the event viewer:
Windows cannot delete the profile directory C:\Users\"username". This error may be caused by files in this directory being used by another program.
DETAIL - The directory is not empty.
- System
- Provider
[ Name] Microsoft-Windows-User Profiles Service
[ Guid] {89B1E9F0-5AFF-44A6-9B44-0A07A7CE5845}
   EventID 1533
   Version 0
   Level 2
   Task 0
   Opcode 0
   Keywords 0x8000000000000000
   - TimeCreated
[ SystemTime] 2014-06-06T07:27:05.906799700Z
   EventRecordID 777512
   Correlation
   - Execution
[ ProcessID] 900
[ ThreadID] 6092
   Channel Application
   Computer TS05."domain".be
   - Security
[ UserID] S-1-5-18
- EventData
Folder C:\Users\"username"
Error The directory is not empty.
Services installed:
- File Services
° File Server
° Services for Network File System
- Remote Desktop Services
° Remote Desktop Session Host
All the latest updates have been installed on all the terminal servers. The users are on different servers who have the problems and they aren't always the same users who have the problems so
don't start by asking if everything is configured correctly cause that is the case!

Thank you for your answer.
The entry in that registry key remains indeed there. Is it safe to just remove that registry key when the user is no longer logged into that specific server?
The KB that you have send me is with the following explanation:
Notes
This issue occurs when the Windows Search service is enabled.
When this issue occurs, the registry subkey that represents the stale user profile is deleted. This subkey appears in the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
But we do not have the Windows Search service installed nor is it enabled in the services list? But the subkey does remain in the registry.
With kind regards,
Thijs

Roaming Profiles Not Working

Hello, we recent migrated our file server to Server 2012 R2. Everything went smooth until I noticed users' account we're getting their Roaming Profiles when launching a Citrix application/session. They're being logged into the Citrix servers with the
'TEMP' profile. Upong logon, I'm seeing the error below thrown in the App logs of the Citrix server:
Windows cannot locate the server copy of your roaming profile and is attempting to log you on with your local profile. Changes to the profile will not be copied to the server when you log off. This error may be caused by network problems or insufficient
security rights.
DETAIL - Access is denied.
Each user account's 'Profile' and 'Remote Desktop Services Profile' tab are using the same UNC path to their profile folder. I've checked the share permissions of the parent folder which I gave 'Everyone' 'Full Control' and I've checked the security permissions
of the users' folders. Each user has 'Full Control' of their folder. What's a bit stranger is that I also have their account configured to map a drive to the same profile folder which works when they launch an application in Citrix. They can browse the folder,
create sub-folders and files, etc.. So while the error suggests that it could be a permissions issue, the fact they can do all this within the mapped drive contradicts that idea. Also, my Domain Admin account is able to access my roaming profile which would
also suggest a permissions issue, but like I said, I think all the share and security permissions are fine.
Is there anything else that may be affecting why the profiles aren't being copied to the Citrix servers and causing this error? Is there a Local Security Policy setting that would weigh in on this? We do harden these servers so I was wondering if it's something
of that nature?

Hi,
Please refer to the article below to check if you the permissons on the profile folder is configured correctly.
Security Considerations when Configuring Roaming User Profiles
http://technet.microsoft.com/en-us/library/cc737633(WS.10).aspx
There is a similar thread, please go through it to help troubleshoot this issue:
Roaming Profiles RDS 2008R2 permissions issue
https://social.technet.microsoft.com/Forums/windowsserver/en-US/6e3c589a-bfa0-492b-86bc-507891fdbee2/roaming-profiles-rds-2008r2-permissions-issue
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Roaming Profiles not working when Lenovo Hotkey Client Loader is running on Win 8.1 laptops

This issue seems to be Windows 8.1 related. Specifically it is affecting all our X1 Carbon, and T440S laptops running Windows 8.1, but NOT 430S running Windows 7. Basically roaming profiles were creating the proper folder on the file server but the folders were empty. Through trial and error, I narrowed it down to the "Lenovo Hotkey Client Loader" as listed in msconfig or Program Files\Lenovo\HotKey\TPHKLoad.exe. Once that service was disabled, the roaming profiles would copy over properly. I am running the latest and greatest version of "Hotkey Features Integration for Windows 8.1" Ver 5.25.0000. Wondering if anyone else is seeing this? Wondering how significant TPHKLoad.exe is? And wondering if we'll see an update to the Features pack to correct this? Hopefully this post can help some others who are looking at empty roaming profile folders.

Hi all,
A
After few months, problem occurred again and i could not install the windows from the scratch over and over again.
I started searching problem online and eventually i found the FIX.
Looks like Registry Entries are getting screwed up somehow.
My "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProvider" was looking exactly as below:
", schannel.dll"
And i made it as below:
"msapsspc.dll,
schannel.dll, digest.dll, msnsspc.dll, credssp.dll"
The solution for the other person in the link ( cannot share link since site does not allow me to ) as a source was only missing "credssp.dll" whereas i was missing everything except "schannel.dll". Strange...
============================
Adding credssp.dll to the list of SecurityProviders in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders
fixed it for me.
My full registry entry now reads "msapsspc.dll,
schannel.dll, digest.dll, msnsspc.dll, credssp.dll"
============================

HCP debugging and profiling does not work anymore

Hi,
starting HCP in debug or profile mode does not work anymore.
Last week I developed a small java app and could debug it on HCP. Today I updated the HCP Tools eclipse plugins and now I can't change the state of the server to debug or profile. Of course the debugger does then not stop at my breakpoints.
Any hints?
Regards Helmut

Hi Alex,
as you can see on the screenshots the option is available. When I start in Debug Mode the state changes to started instead of debugging. Setting breakpoints then has no effect.
1. Start in Debug Mode
2. Server not started in Debug Mode
Regards Helmut

Audio Jack of my HP Envy 4 is not working anymore

Hi all,
I have purchased HP Envy 4 just a 4 months ago and now something worong with its audio jack for headphone and its not working anymore. The hardware profile for this audio jack shows no error but its still not working. Is there anyone who can help me out this issue???
Regards,
This question was solved.
View Solution.

Lets start with you helping us by identifying your notebook completely.
HP has produced and brought to market more than a thousand different models of notebooks and desktop PCs over the years. It is difficult to help you if we don't know which specific model you own..
Method #1: If the notebook will boot into Windows, you can retrieve your Product Number by pressing Fn + Esc key.
Method #2:
Remove the battery and look in the compartment where the battery was installed. You should see a Service tag with printed part number and a product name. Please post the p/n (with all alphanumeric characters) here. If you live outside of North America, it helps us if you post the country of purchase. Also post the installed CPU type. (AMD or Intel)
Don't forget to post the name of the installed operating system if you haven't already done that.
If Windows 8 is installed, you can invoke the search charm and type in the word audio and then on the right hand side of the screen click on Settings. On the left hand side of the screen, you should see an option to select Find and fix audio playback problems. Try it to see if it resolves the issue for you.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Isight camera is not working anymore

Hi chaps, unfortunately my isight camera is not working anymore. It has worked fine so far, but now the camera is not even listed anymore in profiler hardware list. Hence, no clue what to do.

marcoalioli wrote: ... What can I do more?...
Some other ideas in iSight camera failure after OS X 10.9 Mavericks update

After ram upgrade automatic sleep is not working anymore

Some days ago I installed a second 1GB ram module in my 20" Intel iMac. After this I noticed that the automatic sleep do not work anymore. The display turns off but the iMac not. The iMac makes sounds like he wants to do to sleep but could not.
I tried everything I could find... delete OS X powermanagement prefs, run Onyx, reset the SMC.
Do anyone have an solution for this?
Thanks

Does your iMac recognize the new memory module?
Yes.
You might try reseating the module in its slot, and it
would not be a bad idea to run Hardware Test from
your install/restore DVD, just to be sure there is
not an underlying hardware problem.
Already done - no problems reported
Is your new memory module of the same specifications as the
stock module?
Yes it is the same, I had a look on this before I bought it because I wanted to use the dual-channel mode.
Also, what are your settings for sleeping your iMac?
5 min to sleep display, 10 min to sleep the mac
One other thing you may wish to
try is updating your system of OS X 10.4.6 (your
profile indicates that your a running 10.4.5).
Was updated to 10.4.6. I just forget to change the forums pref
I more thing to mention when I start the sleep mode manually everything is fine. I also tried to disconnect all external USB/Firewire hardware and tried it with a fresh mac os install on my USB HDD.
Nothing helped.
Thanks

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

Muse not working anymore

Hello, Alex here
since the last update Adobe Muse is not working anymore for me. The sites open normally but then the Master Pages don't load properly and it freezes all the time.
Does it ring a bell for someone?
Thanks a lot in advance.
Alex

Hi Alex,
Could you please let me know,
1. What is the size of your .muse file?
2 Try to duplicate the .muse file, open it, and try to reduce child pages, and see if you get some improvement.
3. Do you have asset on Network drive, if yes, add these asset to local drive and then use them, see if that helps.
4. Are you using Mac/Windows?
Please let me know these details, and I will try to investigate.

Satellite U400 - the webcam does not work anymore

Hello guys here is my sudden probloema!
About a year ago I purchased a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
Gan you help me?
Graziee

Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

TouchPad lock key does not work anymore on Dell XPS L401X

Hi everyone,
On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
Any hint to fix this problem?
Many thanks!
Tinh

Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
I'm sorry i can't help more.

TV does not work anymore on Qosmio G10

Good morning,
TV does not work anymore, may be due to an update. It has been working OK before.
When selecting TV option 'TV direct ' with MCE menu, I get the following error message: "necessary files for video display are not installed or do not work properly, restart MCE or the computer". Restarting MCE and / or G10 does not solve the problem.
-Intervideo WinDVD creator is installed.
-TV PCI tuner seems to work properly (as per hardware status)
Which files can be missing? What needs to be done?
Any help, suggestions, well appreciated.
Thank you to anyone answering this message.

Hello Luciano
Like you know on this way it is not easy to give you precise answer because we dont know what did you done exactly with your Qosmio.
Please try to use System restore tool at first and roll back the operating system to earlier time. Maybe this will help you and the MCE configuration will be as before.
Try it at first.

My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

DVI port not working anymore after latest BIOS update on T410s

Hi all,
after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
Thanks and cheers!

Do you mean the DVI port on the docking station?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Roaming profile not working anymore

Similar Messages

Maybe you are looking for