Robohelp 8: MSWord 2007 rather then MSWord 2003

Hi team,
I want replace the use of my microsoft word 2003 with robohelp project I usually open by using microsoft word 2007. This operation who seems to be easy at the begining, are now a very busy task and give me a lot of problem.... and message..... who is generated by word when the time is coming to save or create new word document and topics. The problem concerning most of the time my robohelp.dot. This is normal the file I try to create/save are with the docx extension !??
The first reason why we want to use Word 2007, is the facility to open and work with big DOC files from Word..... that's what I hearing !
Some help would be nicely welcome !
Some1no
p.s. we use robohelp 8 for WORD !!

This issue may well be connected with your other post on a similar issue. See if what I have said there makes a difference.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Similar Messages

  • I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore, now my ipod is clear. I have tried disabling my antivirus, no luck.

    I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore. Now my ipod is clear, when I turn it on I get the "Connect to itunes screen", this never goes. I have tried disabling my antivirus, to allow me to restore with no luck.
    When I go into itunes I get the message - itunes has detected an ipod in recovery mode. You must restore this ipod before it can be used with itunes,
    how am I supposed to do this ?
    I would rather take the ipod to someone to do the restoration - I still have itunes with all of my downloads on my computer, I dont want to risk losing this as I can re-install onto my ipod when it is sorted.

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
    Above from:
    http://support.apple.com/kb/TS3694
    It may be more than you security software.
    Do you have access to another computer you can use to restore the iPod to factory defaults/new iPod?

  • Robohelp for Word 2007 templates

    If you have Word 2007 installed, then install Robohelp for Word v7, are the templates used to build the help system by RoboHelp dot or dotx or dotm?

    It should not be necessary.
    See www.grainge.org for RoboHelp and Authoring tips

  • Why to Use EJB rather then Direct Connection To Oracle Thru webDynpro?

    Hi
      Experts,
       I want to know that why to use EJB to connect to oracle rather then direct connection via WebDynpro.
       Please Give Me References to how to connect to oracle with EJB or WebDynpro.I want to tell you that i know JDBC,JAVA and basic web Dynpro.
      Please Reply Me Dear Friends...ASAP.

    EJB are better for a project beacuse the application is scalable, have less maintainence and have better performance.
    Have you gone throght these:
    Connect Oracle 9.2 DB to Web AS 6.40
    web dynpro - database connection
    web Dynpro application connecting to oracle
    /people/ramesh.jandhyala/blog/2007/01/02/webdynpro-and-oracle-using-dtos
    Regards,
    Ashwani Kr Sharma

  • After publishling, my baggage .xlsx file links open in Winzip rather then Excel 2010

    I'm running Robohelp 9, published on a Robohelp 8 server, after publishling, my baggage .xlsx file links open in Winzip rather then Excel 2010 (the .zip folder does not hold the appropriate file)

    Hi there
    For starters, I'd strongly suggest each of you file a Bug Report. (link to that is in my sig)
    As for the rename, I'm unsure why it would be doing that but I DO understand that the Microsoft file extensions ending in x are sort of "Zipped" versions.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32bit

    I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32 bit. Just looking for a workaround as this is not a primary device.

    You should update to the latest version of Snow Leopard, 10.6.8 - you can download it here; however it's still not compatible with iCloud and though you can connect to access your email you cannot access any other of iCloud's facilities.
    However some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. I've not tried it: use at your own discretion.
    To access the email:
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Are you sure you can't upgrade to Lion? It requires an Intel Core 2 Duo processor, which you may well have, though it also needs 2GB RAM so you might need to add additional RAM (might not be worth it for what you want). The published specs don't mention 32 or 64 bit. You can buy Lion by ringing the Apple Store at the number at bottom left of this page.

  • How to download the exe file, rather then installing

        hi, as my working pc has very low internet connectivity, how can i download and take this installable file to my pc? because when ever i click on download flash builder 4.7 trail it starts installing rather then downloading and getting saved in some location.. please help me

    How to create the exe file for java project.Have you ever heard of google? I pasted your exact "question" into a google search:
    http://www.google.com/search?q=How+to+create+the+exe+file+for+java+project.
    and got several useful links.
    Better search terms might yield even better results.
    Sheesh.

  • Unity 5 with MS Exchange 2007 and Windows Server 2003 Ent w/ SP2

    Hello,
    We have Unity 5 with Exchange 2007 SP1 on Windows 2003 SP1 Enterprise server.  We want to upgrade Exchange to SP2 or SP3 but I could not find enough information, may not have looked in right places.
    Does anyone have Unity with Exchange 2007 with SP2 or SP3?  has anyone experienced issues with such upgrade?
    Thanks,
    Paresh.

    Paresh,
    Here's what you need:
    Recommended Service Packs—Message Store
    Revised October 25, 2010
    •Exchange 2010 Service Pack 1
    •Exchange 2007 Service Pack 3
    For support information, refer to the "Support Policy for Microsoft Service Packs and Updates" section of Supported Hardware and Software, and Support Policies for Cisco Unity Release 5.x at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html.
    I pulled this straight from a Cisco document so you could be sure that you are moving to the latest recommended SP for Exchange which is SP3.  I have clients running this SP without issue.
    Hailey
    Please rate helpful posts!

  • I have an 8gb iPhone 4 and i need more space, is there a way to get more space rather then buying a whole new phone?

    I have an 8gb iPhone 4 and i need more space, is there a way to get more space rather then buying a whole new phone?

    No. Sell the 8gb and buy one with more capacity.

  • Connecting via system name rather then IP

    Currently our system connects to SAP by passing through the IP address, client number and their individual logon details.  I'm sure there was a way to connect by using the system name rather then the IP with the SAP COM objects but so far i've been unable to achieve this with the .NET connector.  When I supply a value for the SAPSystemName in my Destination object I get "Open file 'C:\WINDOWS\sapmsg.ini' failed" as an error message.  I do not have a sapmsg.ini file in C:\WINDOWS\ and this is obviously why the error is occurring.  What i would like to know is if there is anyway of doing this without having the sapmsg.ini file? 
    My fall back plan would be to interrogate the SAPLogon.ini file myself and determine the IP for the given system name however this isn't an ideal solution though so I would prefer to find a better way of retrieving this information.
    Any suggestions or comments would be greatly appreciated.
    Thanks,
    Charles

    Whooops....figured it out myself.  For those that are interested:
    SAPLogonDestination destLogon = new SAPLogonDestination();
    destLogon.DestinationName = destLogon.GetDestinationNameFromPrintName( SystemID_ );

  • How to open forms in separate Java Applet rather then Internet explorer

    Aslam o Alikum (Hi)
    I want to open my form in separate Java Applet rather then in Internet Explorer.
    Please help
    Best Regards,
    Nasir Zeeshan.

    Aslam o Alikum (Hi)
    Let me explain my question
    when i run my form from application server. it opens a web browser and display my form into it (form display in java applet embbeded in internet explorer). But what i want is that the web browser open the form in java applet as a separate window.
    Is it clear now ?
    Best Regards,
    Nasir Zeeshan.

  • When I right click on something with my mouse(not wireless)..It opens up the previous thing I had opened rather then what I am currently trying to open. It did it before the update and is still doing it

    right clicking on photos, websites etc... with my mouse which is not wireless... It reopens the previous attempts rather then the current one I am trying to see

    I found this solution on another newsgroup, so I thought that I'd share it here.
    Thanks to all who tried to help.
    "I was also experiencing these annoying sync-problems. The cause for
    this lies in nvcpl.dll - a nvidia dll, which scans for connected TVs.
    The first time the dll is loaded, is at windows-bootup
    (HKEY_LOCAL_MACHINE->SOFTWARE->Microsoft->Windows->CurrentVersion->Run).
    This causes the first flicker and unfortunately the auto-startup-entry
    can't be deleted.
    The flicker when right-clicking on video-files is caused by a shell-
    extension, which the nvidia-driver installs for all types of video-
    files. This shell-extension calls nvcpl.dll everytime you right click a
    video file to scan for connected TVs. If a TV is present, the shell
    extension shows up in the context-menu as "Play on My TV". I never
    tested this, but I suppose when you click it, the video is directly
    shown on your connected TV.
    This could have been implemented a lot better, this f...ing sync-flicker
    is driving you crazy when browsing a video archive.
    After scanning the registry, I found the key responsible for the shell
    extension. Just search for "PlayOnMyTV" in the registry and you will
    find some entries under "shellex" (shell extension). These entries
    contain an identifier, {FFB699E0-306A-11d3-8BD1-00104B6F7516} in my
    case, I'm not sure if this identifier is static or created dynamically,
    so in your registry, it might be another number. Now copy the identifier
    and search for it in the registry; delete every occurence when it's
    connected to video-file formats (.avi, .mpg, .mpeg and so on) and
    afterwards the "PlayOnMyTV"-shellextensions."
    From http://www.techimo.com/forum/t117062.html

  • .php files downloading rather then displaying

    I have an X Serve with OS x 10.5.6
    Apache is running fine, I have created a test .php file and put it in WebServer/Documents.
    When I try to view it through a browser, it DOWNLOADS the php file rather then just displaying it in Safari. It opens in TextEdit (what was used to create it).
    What is wrong?

    Hi,
    In the Client OS Apache is running all the time.
    In Server you should have options to start or stop it so you can edit files.
    10.5.x Server > Web forum
    http://discussions.apple.com/forum.jspa?forumID=1237
    You may find more specific help in this forum.
    10:01 PM Thursday; June 10, 2010

  • Can you sort photos by Title rather then by Date Taken

    I want to sort my photos by Title rather then by Date shot. Is that possible in the New Photos App?

    In the new Photos (part of OS 10.10.3) , is there a way to rearrange photos in alphabetical order, since they have arrived without the titles which were present in the iPhoto ?
    Shall we be required to re-name all the photos for this new version?

  • Interface performs insert rather then update on target table

    I'm cannot figure out how to control my Interface to update target records rather then insert new records when a source value changes.
    I have primary keys defined.

    Turns out one of my primary key columns was being set inside the interface, the value did not exist in the source, so it was marked for update.
    Thanks!

Maybe you are looking for

  • Personal domain for one site but not another

    Hope someone can help. I have my family site set up through iWeb on Mobile me. I would like to create a "new" site that would be for a group I am involved in and for which I have obtained a personal domain name. I would like to know if the personal d

  • DVDSP 2 not accepting elementary stream files

    Greetings and apologies up front for being a newby AND using old software! I've had this software forever and just never needed it, but now it seems I do, and I'm having a problem, no doubt very basic: 1. I've got an elementary stream with 2 files, a

  • In function palette-instrument I/O i have lost library:INSTR LIB

    when i clik on instrument I/O in the function palette, inside i have this library:GPIB,SERIAL,VISA,I/O COMPATIBILIY but i lost library INSTR LIB. In directory c:\programmi\national instrument\labview6\instr lib there are all my driver instrument haw

  • My Ipod touch 2nd generation won't upgrade to version 4.2.1 from 2.2.1.!!! Please help!!!

    It is definitely a 2nd generation.  I purchased it second hand and it must have been restored to factory defaults.  I plug it into Itunes and it says I have the latest version.  Where do I find 4.2.1???

  • CRVS2010 Beta - Help Wanted for VS2010 and CR!

    I have been having a hard time getting CR to appear in the VS2010 Ultimate toolbox. I have set the target to Framework 4.0 and installed the CR4VS2010 program but the CR viewer is not showing. The problem is worsened by the fact that I am new to CR a