RoboHelp X5 and Windows 2003 server

Does enyone know if I have to change some robohelp settings
when robohelp is installed on a windows 2003 server?
I'm working on merged htm help files and since we moved all
files to a windows 2003 server, I noticed that the index and the
search function of the newly compliled files don't work anymore.
The search displays the message 'No topics found' when I perform a
search action in a newly compiled project
The index only displays the index keywords of the main
project and not the index keywords of the linked projects.
I'm looking forward for any suggestion to fix this
problem.

Welcome to the forum.
I hope you mean when robohelp output is published to a
server, rather than robohelp itself being installed on a server.
If that is what you meant, look at Snippet 57 on my
site.

Similar Messages

  • Calendar Connector and Windows 2003 Server

    I'm trying to get the connector setup and functioning on a windows 2003 server box with outlook 2003, however the install process generates several failures, and never is able to completely finish. Everything goes fine, until it gets to the point of copying files, at which point I recieve a warning about the uninstaller not functioning properly, so I will be unable to uninstall the application, then the installer generates an application error as soon as it finishes copying files. Below is included the OCSETUP.LOG file, should it provide any more information. Thanks for any help.
    Start setup
    Install time: 1-18-2004 01:43:01
    Searching for MS Outlook installation : OK
    Check install package :
    Version :
    Install date : 200312121427
    Enter CheckRequirements.
    Running : Win 2000
    Exit CheckRequirements
    Check admin rights : OK
    Start FillLangIDList
    LCID: 1033
    LCID: 2052
    LCID: 4100
    LCID: 3076
    LCID: 5124
    LCID: 1028
    LCID: 1030
    LCID: 1043
    LCID: 1035
    LCID: 1036
    LCID: 1031
    LCID: 1032
    LCID: 1038
    LCID: 1040
    LCID: 1041
    LCID: 1042
    LCID: 1044
    LCID: 1046
    LCID: 2070
    LCID: 1034
    LCID: 1053
    LCID: 1055
    End FillLangIDList
    Enter GetInstallMode
    Silent install : FALSE
    Exit GetInstallMode
    Loading install dll : OK
    Check if OL is running
    Check OL running exit
    Enter CheckOutlookVersion
    Outlook version : 11.5510
    Get Outlook service option :
    Exit CheckOutlookVersion
    Enter CheckPreviousVersion
    First time install or the uninstall was here before or old version.
    We're installing over another version
    Try to find an old version
    Old version =
    Result check version : 0
    Exit CheckPreviousVersion
    Enter SetupInstall
    Exit SetupInstall
    Enter SetupScreen
    Exit SetupScreen
    Setup screen
    Enter ShowDlgs
    Check the disk space
    Target dir C:\Program Files\Oracle\Outlook Connector
    Select lang
    Select lang: Chinese (Simplified)
    Copy comp: Lang Chinese Si No
    Select lang: Chinese (Traditional)
    Copy comp: Lang Chinese Tr No
    Select lang: Danish
    Copy comp: Lang Danish No
    Select lang: Dutch
    Copy comp: Lang Dutch-Nl No
    Select lang: Finnish
    Copy comp: Lang Finnish No
    Select lang: French
    Copy comp: Lang French No
    Select lang: German
    Copy comp: Lang German No
    Select lang: Greek
    Copy comp: Lang Greek No
    Select lang: Hungarian
    Copy comp: Lang Hungarian No
    Select lang: Italian
    Copy comp: Lang Italian No
    Select lang: Japanese
    Copy comp: Lang Japanese No
    Select lang: Korean
    Copy comp: Lang Korean No
    Select lang: Norwegian
    Copy comp: Lang Norwegian-Bk No
    Select lang: Portuguese (Brazil)
    Copy comp: Lang Portuguese-Br No
    Select lang: Portuguese (Portugal)
    Copy comp: Lang Portuguese No
    Select lang: Spanish
    Copy comp: Lang Spanish No
    Select lang: Swedish
    Copy comp: Lang Swedish No
    Select lang: Turkish
    Copy comp: Lang Turkish No
    Select lang end
    Exit ShowDlgs
    Enter ProcessBefore...
    Exit ProcessBefore...
    Enter MoveFileData
    Enter HandleMove...
    Exit MoveFileData
    Enter ProcessAfter...
    App path : C:\Program Files\Oracle\Outlook Connector
    Exit ProcessAfter...
    Enter SetupRegistry
    Exit SetupRegistry

    Welcome to the forum.
    I hope you mean when robohelp output is published to a
    server, rather than robohelp itself being installed on a server.
    If that is what you meant, look at Snippet 57 on my
    site.

  • SCEP on ISE 1.2 and Windows 2003 Server

    Hi there
    has anyone ever be able to get SCEP on ISE 1.2 working with Windows 2003 Server? I know Cisco recommends Windows 2008 Server onwards, but sometimes the server infrastructure is not yet there.
    Thanks in advance and best regards
    Dominic

    Hmm, good question that I would also like to know the answer to. All of my deployments have been either 2008 or 2012. I believe long time ago I got it working in my lab with 2003 but then my 2003 server blew up so when I re-created it I did it with 2008. However, I cannot confirm 100% and even if it was true it was not in a full production environment. So it would be nice if someone else can chime in here. 
    I did come across this though that would suggest that it is supported with some tweaks:
    http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_ISE.html
    Windows Server 2003, Microsoft SCEP (MSCEP) required a Resource Kit add-on to be installed on the same computer as the CA. In Windows Server 2008, MSCEP support has been renamed NDES and is part of the operating system. NDES may be installed on a different computer than the CA (http://technet.microsoft.com/en-us/library/cc753784%28WS.10%29.aspx).
    Thank you for rating helpful posts!

  • OS 10.3.9 and Windows 2003 Server - Can't get to the network

    My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
    The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
    Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
    Thanks.
    Power Mac G5   Mac OS X (10.3.9)  
    Power Mac G5   Mac OS X (10.3.9)  

    My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
    The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
    Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
    Thanks.
    Power Mac G5   Mac OS X (10.3.9)  
    Power Mac G5   Mac OS X (10.3.9)  

  • WRV54G and VPN and Windows 2003 Server

    Hello. I use Windows 2003 Server on my laptop and trying to establish VPN into my WRV54G. QuickVPN is not compatible with the OS, so that's not an option. I tried the manual setup and I got to a point where I had to enter the destination IP address. I use a DynDNS address and so I won't have a static IP.
    I'm using firmware version 2.39.2.
    Thoughts?
    Thanks!

    First thing i would like you to check is if you are able to "ping" the WAN ip address for the WRV54G.
    Also what are the settings that you have on the WRV ??? typically the remote secure group and remote security gateway should be set at "any".
    In the WRV...under the VPn go to advanced VPN and sset the mode to "agressive" , enable keep-alive and netbios broadcast....
    let me know if this work or let me know a few more details.

  • DLU - Zen3.2sp3 and Windows 2003 Server TS

    Hey guys,
    Im using Windows 2003 Server with TS installed for Citrix 4.0 running
    Netware 5.1 Sp7 with Zen3.2 sp3. Are there any issues with DLU working on
    this setup. At this stage its not working. Using the Novell Client 4.90 Sp2.
    Policy works fine on XP Pro, Windows 2000 server and Pro.
    Any help would be appreciated.
    Thanks
    Rami

    rami,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Software Packager and Windows 2003 Server

    I want to make an installation cd ( with Oracle Software Package 2.2.0.16.0) having my software bundled with Oracle Database 9.2.
    I'm getting the following error log generated each time I try to install my components in windows 2003 Server (OSP action = CopyDllGroup):
    java.io.IOException: The system cannot find the file specified
         at oracle.sysman.oii.oiix.OiixJarClassLoader.updateEntriesList(OiixJarClassLoader.java:263)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.<init>(OiixJarClassLoader.java:209)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:412)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:431)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:444)
         at oracle.sysman.oii.oiis.OiisLibraryLoader.loadLibrary(OiisLibraryLoader.java:161)
         at oracle.sysman.oii.oiis.OiisLibraryLoader.<init>(OiisLibraryLoader.java:103)
         at oracle.sysman.oii.oiis.OiisActionLibLoader.<init>(OiisActionLibLoader.java:40)
         at oracle.sysman.oii.oiic.OiicInstallSession.getLibLoader(OiicInstallSession.java:4633)
         at oracle.sysman.oii.oiic.OiicInstallSession.getActionLibLoader(OiicInstallSession.java:4399)
         at oracle.sysman.oii.oiis.OiisCompActions.doActionImpl(OiisCompActions.java:1046)
         at oracle.sysman.oii.oiis.OiisCompActions.copyGroupActionInner(OiisCompActions.java:885)
         at oracle.sysman.oii.oiis.OiisCompActions.copyGroupAction(OiisCompActions.java:748)
         at oracle.sysman.oii.oiis.OiisCompActions.doAction(OiisCompActions.java:546)
         at Components.PBDK.v10_2_0_75_16.CompActions.doAction(Unknown Source)
         at Components.PBDK.v10_2_0_75_16.CompInstallPhase1.doActionP1copyDllGroup2(Unknown Source)
         at Components.PBDK.v10_2_0_75_16.CompInstallPhase1.stateChangeActions(Unknown Source)
         at Components.PBDK.v10_2_0_75_16.CompActions.stateChangeActions(Unknown Source)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiilActionThr.run(OiicInstallActionsPhase.java:604)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase.executeProductPhases(OiicInstallActionsPhase.java:2199)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase.doInstalls(OiicInstallActionsPhase.java:2052)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiInstRun.run(OiicInstallActionsPhase.java:2945)
         at java.lang.Thread.run(Unknown Source)
    In Windows 2000 Server this installation finished successefully.

    Welcome to the forum.
    I hope you mean when robohelp output is published to a
    server, rather than robohelp itself being installed on a server.
    If that is what you meant, look at Snippet 57 on my
    site.

  • Clean Access and Windows 2003 Server

    I am trying to install the Clean Access Client on a VM running Windows 2003 Server. When I connect to our customer's network the VPN client appears to connect properly and I see the Clean Access window. Then it all seems to fall over. My customer tells me I should see a blue window with a red OK button on it but I never see it. As a result I never get completely into the network. Is this because I am running this on Windows 2003 Server or should I be looking at something else? Can this run in a Virtual Environment and on 2003 Server?

    I work it out partially by myself:
    1)
    (excuse me, I meant "kinit and Krb5LoginModule" not "kinit and kinit.exe").
    Krb5LoginModule seems to work now (with TCP). The output is:
    KRBError:sTime is Tue Jun 01 17:13:51 CEST 2004 1086102831000
    suSec is 945761
    error code is 52
    error Message is Response too big for UDP, retry with TCP
    realm is SSOTEST.RTC.CH
    sname is krbtgt/SSOTEST.RTC.CH
    KrbKdcReq send: kdc=rtcnt978.ssotest.rtc.ch TCP:88, timeout=30000, number of retries =3, #bytes=232
    DEBUG: TCPClient reading 1496 bytes
    KrbKdcReq send: #bytes read=1496
    KrbKdcReq send: #bytes read=1496
    EType: sun.security.krb5.internal.crypto.DesCbcMd5EType
    KrbAsRep cons in KrbAsReq.getReply sso_testuserCommit Succeeded
    Which is what I want (it tries first with UDP, then the KDC says the TGT is too big for UDP and the client tries again with TCP)
    2)
    I still have the error :-(

  • Oracle Discoverer and Windows 2003 Server

    Did anyone know if Discoverer 4.1 is compatible on windows 2003 server?
    Also if Discoverer 10g is also compatible on windows 2003 server?
    Thanks.

    Hi,
    No, Discoverer 4i is not supported with Windows 2003, see Note 332433.1. 10g is compatible with Windows 2003.
    Rod West

  • Cannot establish a link between MacPro and Windows 2003 Server

    I just had an issue where we had a server crash. This server supports several PCs, as well as two Macs. The server has been brought back online and can communicate with all of the PCs. However, neither one of the Macs can now communicate with the server.
    When I try to connect through the sidebar in the finder window, it will bring up the authentication window. But after I type in my password and hit enter, it gives me the message, "The alias "" could not be opened because the original item could not be found."
    When I try to connect through Go>Connect to Server, it gives me the message, "The Finder cannot complete the operation because some data in "" could not be read or written (Error code -36).
    My IT guy says that everything is alright with the server and that the problem has to be in the Mac settings. He does not know anything about Macs, however.
    Can somebody help me out with this issue?

    The only thing that comes to mind is a few settings in the Security Options of the Local Policy. Here's a link:
    http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x
    Not sure if that's it, but I hope it helps.

  • Oracle and Windows 2003 server

    I installed 10gR1 on a 2003 server. When I restarted the server, Oracle would not start (all services set to start automatically). If I stop and restart it through Windows nothing happens. If I login through SQLPlus as sysdba and use the startup command, everything works fine. Any ideas?

    Check,
    Auto-starting Oracle Services
    http://download-west.oracle.com/docs/cd/B10501_01/win.920/a95491/admin.htm#1005941
    And check if there's any error in your alert.log file

  • 802.1x and windows 2003 server

    we have a ACS 4.1 install with 5 acs servers, 25 remote switches and over 800 xp users all doing certificate based machine authentication that work perfectly fine. We are also using a guest vlan in our sites to auth fail a guest user onto the guest vlan so they can get internet access. We had to reduce the dot1x timers so dot1x would fail(45 sec) before windows DHCP fails(approx 55 sec) This has worked fine for the last year with all of our xp machines. We put in a new 4510 into our main building last week for user access and we are running into a issue with developer boxes that are running 2003 server or 2003 x64. What happens is that the when they reboot, the authentication process takes too long and they auth fail and get put into the auth fail vlan. They then get authenticated 20 sec later and they are authenticated in the guest vlan and remain stuck there until I bounce the port. I have a TAC case opened just wanted to see if anyone else has seen this or could duplicate. Very weird and specific to 2003 server 2003 server x64 with Broadcom drivers. Thanks in advance.

    This is actually only on the reboot. One interesting thing is that some people have dynamic vlans, and they auth-fail, get put into the guest vlan, then authenticate, get put into the correct vlan and are fine. Even unplugging/replugging doesn't seem to do it which it really should as the authentication proccess should start over. Also in their infinite wisdom, security has disabled windows profile caching so a user cannot log onto the box without domain connectivity so they can't disable/re-enable. By reducing the dot1x timeout from 90 seconds to 45 to fix the windows DHCP issue we probably caused this one. Again it seems specific to the newer Dell workstations with newer broadcom drivers.

  • DataGuard setup between Windows XP Pro and Windows 2003 Server - possible?

    Oracle 9.2. The documentation says "The hardware and operating system architecture on the primary and standby locations must be the same". I understand that this is recommended setup and it will be much better if it will be setup on EXACTLY same hardware and OS. My questions is - Is it possible to set it up between XP Pro and 2003 Server? Had anyone done it successfully the past?
    Thank you

    Hi,
    between XP Pro and 2003 ServerBoth are Win* releases, both are 32bit. So I can't see why it would not work. But I think that certified combination requies that both computers use same O.S. release (XP pro xor 2k3 server).
    Regards,
    Yoann.

  • CE 7.1 on Oracle and Windows 2003 Server

    Hello,
    We have the need to install SAP Strategy Management which runs on NW CE 7.1 on a Oracle and Windows environment.  Acorring to the PAM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0471c41-da0e-2b10-ceb4-a31636f9c83d it looks like CE on Oracle and Windows is supported could someone please verify this?
    Many thanks,
    Mike

    Hi,
    Yes, CE is supported on Oracle since SR5.
    Best regards, dido

  • ColdFusion 4.0 and Windows 2003 server

    Greetings,
    I'm a newbie to coldfusion so please excuse the ignorance. I
    have a ColdFusion 4.0 applications sitting on a win2k that need
    move to a win2003 servers. Does 4.0 run on win 2003 and can be
    installed on it? The application is going to be retired (famous
    last words) and no new develpment is planned for it so an upgrade
    doesn't make sense ($$) at this time.
    thanks for your help in advance!
    Mike W.

    Specifically how did you upgarde?
    1.) Windows OS on the same box?
    2.) HW, Re-installed, OS, LAYER PRODUCTS, and some how reload
    you coldfusion configuration?
    3.) Something other? (if so could you explain)
    Thanks again for all the input...

Maybe you are looking for

  • Solution Manager 4.0 client copy

    Hi all, We have installed solution manager 4.0 SP 12. We have also done a client copy from 001 to 100 in order to work exclusively in the client 100. I have also changed the client reference in RSADMINA table and the UME from 001 to 100. Finally, whe

  • Bridge (cs6) on mac computer

    Im running Bridge (cs6) on my mac computer and have been doing this for long time. Since last week Bridge is coming up with a message: "Bridge encountered a problem. Try to empty cache." After doing the application crashes. If I dont try to empty cac

  • IPod won't correctly sync.

    I've been trying to sync my iPod 5G 80 gb for the past couple days, and have been having some serious problems. First, it was just syncing slow, so i attempted to sync only 1 playlist, and it deleted all of my music. With this, i knew i had a problem

  • ABAP WD: get link's value in a table

    Hello, I have a table with links. I need to get value of a link that user clicks on. How can I get it? Thank you.

  • Dual sc/pc connector MMF for X2-10G-SR and XENPAK-10G-SR

    the data sheet for both xenpak and x2 10G-SR specifies dual sc/pc connector MMF we want to know if this is the same SC connector we use for GBIC converters.