Roles for Testing ChaRMs for Non-Abap Systems

Hi,
Can you please suggest what all authorizations  are required for Testing the ChaRM functionality for non-abap systems
Thanks in advance
Regards,
Reddi

hi
check the link
Check the Configuration guide for the prerequisites.

Similar Messages

  • EWA report for non-abap systems

    Hi Gurus,
    Good day.
    I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
    Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
    It is both? Which one?
    It would be also great if you can provide me links/documents in relation to my queries.
    Please do note that the current version of solman system is 7.1
    Thanks in advance for the help
    Virgilio

    Hi Virgilio,
    To generate an EWA report for Java stack system,
    you need to do following:
    1. install smd agent (diagnostics agent) on Java stack system
    you can install this agent standalone, details see note 1234384.
    The installation Guide is also attached in note 1234384.
    2. finish Initial Config and Basic Configuration in solman_setup for
    solman system, the setting about Enterprise Manager is also included
    in these configurations, please ensure EM is running properly.
    3. start managed system configuration for the EP system in solman_setup
    after selecting the system type 'Java', please finish all steps as
    suggested in which step. The Step 'Wily Introscope Configuration' is to
    install Introscope Agent which is used for Java stack system. More infor
    please read the installation Guide of Enterprise Manager and note
    797147.
    4. You should be able to see data in Wily Introscope and Workload
    analysis via
    Root Cause Analysis->End-to-End Analysis->select the system->Workload
    Analysis
    5. If the EP system is added in a solution, the EWA task for this system
    should be shown up in solman's SDCCN.
    Also check note: 976054"
    Thanks
    Regards,
    Vikram

  • How to setup EWA for non-ABAP system with SM 4.0 ?

    Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
    It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
    I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
    Thanks.

    Hi Andrew,
    we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
    This is the old, available standard solution. At the moment we develop it also for java stand alone.
    I think it will be available with the new ST-SER in autumn
    Regards,
    uDo

  • EWA for non-ABAP systems

    Hi,
    We are planing to implement EWA for Java systems. Currently EWA is active for all ABAP systems. Do we need Wily Introscope in order to setup the EWA for non-ABAP systems? Or just we can use the SMD to generate EWA reports for Java systems?
    Any idea?
    Thanks,
    Kris

    Thanks Paul
    We are on SM 7.0 EhP1. But I see following info in note 976054. It says data sources for EWA are different on 7.0 EhP1, does it mean we don't need wily from 7.0 EhP1 onwards?
    Data sources in Solution Manager Diagnostics up to SP17 used for EWA for non-ABAP components analysis are:
                          - Introscope (SAP Note 797147),
                          - Garbage Collection (SAP Note 1079125) and
                          - Portal Activity Reporting (SAP Notes 936612 to know how to activate PAR and 914791, 1075276 to configure SQL           
                            Command Console).
    Starting with Solution Manager 7.0 EHP1 (SP18) the data sources are:
                          - Solution Manager BI for performance data
                          - Configuration and Change DB(CCDB) for configuration data
    Thanks,
    Kris

  • Data elements for IDoc Segments to non-SAP system

    Hi,
    I need to create IDocs for transferring data to non-SAP system. When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system? Because there are many fields where the field attributes of SAP system do not match the corresponding fields of receiving non-SAP system.
    Thanks in advance!!
    Regards,
    Sriram

    Hi Sriram,
    When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system
    Is it custom  segments .
    Regards,
    Madhu.

  • Business scenairo for transfering data from Non Sourace system.

    Hi everyone,
    i am looking for sample business scenario for transferring data from non source system.
    If the case study is for any Financial system that will be even great.
    if any one has good Document Please Fwd it to e-mail [email protected]

    hi rk,
    what you means to say something source like flat file, not from r/3 side.
    or
    what exactly you want,plz explain?
    regards,
    San!
    if helped,assign point!

  • IDOC to Non-ABAP-System

    I am trying to send an IDOC to a Non ABAP system. The receiving system consists of an "IDOC Listener" which receives and sends. The RFC Destination for the connection between the PI and that system is type T (TCP/IP). When checking it in SM59 or IDX1 on the PI, everything looks fine - connection works. Still when I try to send a message, the adapter call fails with the message "RFC Destination incorrect". Is it necessary to have a type 3 (ABAP system) connection for the IDOC adapter and if yes, is there any way to bypass this? The scenario works fine if I communicate between a standard R/3 4.7 and the 3rd party system (even with the type T destination) - nevertheless PI is intended to be used in between for monitoring etc. - therefore the direct R/3 <-> 3rd Party scenario is no option for me. Any clues highly appreciated.
    Cheers,
    Andy

    Hi,
    >>>Is it necessary to have a type 3 (ABAP system) connection for the IDOC adapter and if yes, is there any way to bypass this?
    I did a scenario like this (and the other way round) a year ago and as far as I remember I didn't use RFC dest type 3 .
    there is an easy way to find it out - just use IDOC classes from service.sap.com/connectors
    (server) in order to check what kind of RFC does it expect - I tested those libraries and they worked with PI
    without any issues (and with corresponding RFC dest)
    Regards,
    Michal Krawczyk

  • EWA on Non-ABAP System with Solution Manager EHP 1

    Hi Experts,
    We have recently updated our solution manager from SP Stack 16 to EHP1 (sp 18). we are now planning to set up EWA for non-abap components (EP 7.0). however, the only SAP note that i have been able to find is "976054 - Availability of EWA for Non ABAP components" but this is only limited up to SP 17. I have not been able to find any guides relating to EWA thru Solution Manager EHP1.
    I would greatly appreciate if anyone can refer any documents or SAP notes that would enable setting up EWA for non-abap components thru Solution Manager EHP1.
    We have also gone through the note 1332428, but we have'nt found it useful. We are still struggling to generate EWA report on Non-ABAP system.
    Looking forward to your kind help.
    Thanks and Regards,
    Sarthak Syal

    Hi Sarthak,
    Good!!
    Please do  the following:
    1) include the system in the Solution and scheduled the EWA session.Logical component should refer to the Non-ABAP System with no ABAP instance as relevant under the SID definition in SMSY-systems.
    2) Is the Non -ABAP ( assuming its java) has the Software component defined and is mentioned as relevant under the SID with the component name and type.
    3) Having said that SMD - Root cause Analysis functionality is configured-> check whether you are getting the Details for the Non-ABAP systems in the analysis Tabs of Root Cause Analysis.
    This should be good to go. Wait for the session to get completed.
    Thanks,
    Jagan

  • EWA reports for non abap systems

    Hello gurus,
    I am facing a problem with configuration of EWA reports for SAP NW Portal.
    I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
    So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
    I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
    I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
    >>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
    In the SMD i can see just the abap systems  for which the EWA are being already generated.
    (i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
    Do you have any idea, what i have done wrong?
    My solution manager is running on Sap NW 7.0, SPS16,
    Sattelite system , EP  SPS 19
    Thank you very much for your points!!

    Hello Jagan,
    I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
    And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
    Do you have any idea?
    Thanks,
    Best regards
    Slavomir

  • Invoice posting for the PO from Non-SAP system

    Dear Friends,
    I have one requirement like from Non-SAP system PO details will be accessed from SAP and after certain calculations Invoice will be posted for the same PO back to SAP.
    Everything needs to be done in Non-SAP system by accessing SAP system.
    There are some BAPI which can be used for the purpose, but I am not able to get the correct BAPIs to get the PO details and Posting the Invoice for PO.
    Please anybody can help me out with the BAPI details.
    Thanks in Advance.

    Hi,
    Use following BAPIs
    BAPI_PO_GETDETAIL - To get Purchase Order details
    BAPI_INCOMINGINVOICE_CREATE - For Incoming Invoice
    Regards
    Vinod

  • Using BAPI for calling transaction from NON-SAP system

    hi all,
    im new to BAPI , i m working in producton firm we r short of license of SAP, we have given few authourisations to our venders and  we also have implemented HR portal and we r having shortage of license in that too. so my question is that can we use BAPI to reduce the use of SAP on vendors side and also for HR portal? like by using non-sap system on vendors side and for portal we can resolve the issue of licenses..???
    if yes then i want to do it that will be good for my carrer point of view. plzz help me out and give me the simple solution on it. we can not afford to buy the licenses bcoz of financial issues..
    thanxx....

    Hi Nilesh,
    Depending on the Scenario you need to decide what BAPI you will use. what solution are you excepting?
    Regards
    Shital

  • Scenario for interface between a non sap system and a SAP erp

    Hello,
    I need some help in order to elaborate a interface between a SAP ERP and a non-sap system with the help of a XI system.
       -  At first regarding the interface from the non sap system and a SAP ERP :
           the non sap system sends a flat file to the XI system. The flat file contains a row with header data and rows with item data. We were thinking when the file arrives to the XI system, to save the data in a header database and in a items database in XI. is it possible ?
    And then to have like a job that reads the database and creates idoc and sends them to the SAP erp and updates the xi header and items database  with a flag that means that the records have been sent to the SAP erp.
       -   Regarding the interface SAP erp to non SAP system:
           the SAP erp sends idoc to XI. Then the idocs are transformed into flat file.
    Is this scenario possible ?
    Do we need any adaptator between the non sap system and the XI ?
    Thank you for your help
    Christophe

    Hi Bontron,
    Idoc doesnot support synchronous call. So you can use either proxy or function module and inturn call the idoc from them and send response back to xi. You need to have two scenarios for your design.
    Scenario1:   Source File (file adapter) -- xi -- Dump into database tables (Jdbc Adapter)
    Scenrio2:  Pickup form Database tables  (Jdbc Adapter) -- xi -- RFC Adapter  ---> This is synchronous call.
    Regarding the interface SAP erp to non SAP system
    You can send idoc to xi and from there use File adapter to send to the receiving system.
    These blogs may help you to some extent:
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    https://wiki.sdn.sap.com/wiki/display/XI/step%2bby%2bstep%2bRFC%2bto%2bJDBC%2bscenario   (your scenario will be opposite to this)
    Regards,
    ---Satish

  • Segment creation for outbound Idocs to non-SAP system

    Hi,
    I need to create a custom idoc for outbound interface to a non-SAP system. Here I need to create segments. So, should I create the fields in the segment with the attributes of fields in non-SAP system or fields attributes should be of SAP system.
    For example:
    There is a field invoice number which is of 10 Chars in SAP but in legacy it is divided into 2 fields: invoice prefix of 2 chars and invoice no. of 8 chars. Should my segment contain one invoice field of 10 chars or should it be two fields with 2 and 8 chars?
    In general, always should the segment fields contain field attributes based on receiving system?
    Thanks in advance.
    Sriram.

    Hi
    Should my segment contain one invoice field of 10 chars or should it be two fields with 2 and 8 chars?
    I think it shoild be better to have 2 fields, but probably the result will be the same if you send the idoc by a text file, because both informations should be contiguos, I mean if you have file with a record like this:
    1234567890
    This record can be obtained downloading a segment with 2 fields:
    FIELD1 = '12'
    FIELD2 = '34567890'.
    or single field:
    FIELD = '1234567890'.
    So it'll be the same for tje target system
    In general, always should the segment fields contain field attributes based on receiving system?
    It depends on who has to convert the idoc to the right format for the target system
    I mean you can create a "SAP" Idoc, so the receiving system will have to convert it to the right format
    or
    you can send the idoc in the right format, so the receiving system doesn't need to convert it
    Max

  • Is a third-party tool required for data extraction to non-SAP system?

    Hi,
    I want to extract data to non-SAP systems with the open hub service.
    If I choose Database tables as open hub destinations, I would like to know if a third-party tool is mandatory and if it's possible to send data directly from database tables in BW to non-SAP systems.
    Many thanks
    Ella

    you can choose a flat file on the application server and then transffer the file from the application server to other server where you want to use.
    in case you want to use the table in the open hub service. any other software that can connect to oracle db / the databasee you have and can access the data from the table.
    Regards,
    Bwer
    Assign points if helpful.

  • Monitoring of Non ABAP System

    Hi,
    I posted this thread at the Solution Manager forum.
    I need to confirm what i understood there.
    I want to monitor portal (Non ABAP) components in Solution Manager 3.2 .
    I was advised that it is not possible in Solman 3.2 and i have to upgrade it 4.0.
    Could anyone please confirm this.
    Juan , Awaiting your comments.
    Others are welcome too.
    Regards,
    Ashish .A. Poojary

    Hi,
    You have to install solman diagnositic tools to monitor stand alone java stack, But if you want to monitor java stack of abap+java then you have to first register the ccms agent through visual admin. Then you can add the java stack as logical component. But 4.0 has  be the better options.
    There are many posts in the forum so for adding the java stack .
    Regards,
    Vamshi.

Maybe you are looking for