Roll out for new plants

Dear All,
I would like to know what are the steps taken to roll out a running SAP project for new plant ?
Regards
Mohan

Check this:
http://www.open.hr/hiz/hrusko/RolloutPresCASE3.pdf
http://software.silicon.com/applications/0,39024653,39167631,00.htm
http://help.sap.com/saphelp_sm40/helpdata/en/45/5af1f3e5f81dece10000000a155369/content.htm
Thanks..
Shambhu

Similar Messages

  • Roll out for new plant need some informations

    Hi,
    We are going to roll out for our 2nd plant. So I need your help.
    I am explaining the scenario,
    Current scenario is: we have two manufacturing plants (ex:-one in noida and another in gurgaon) and in both plants we have six product line (in A plant=3, in B plant=3).
    For both plants we are using one Company code (1000). and we are not using the business area.
    But now the problem is this, that management wants separate reporting (P&l statement and Balance sheet) Plant wise and Product wise.
    We decide to create a separate co- code for 2nd plant and six business area for product lines.
    (In this regards I need your suggestions that how can we define the enterprise structure)
    Please tell me
    1. what new configurations we need to be done for new co-code?
    2. In which areas business area will be affected and how and where we will assign the business area?
    3. As we are doing transaction in sap since last year and we are doing this roll out in mid of 2008 so what will be the impact on the business.
    4. How we will transfer the transactional data from one co-code to another, because data of both plants lies in previous co-code(1000).
    Data like:- A. Transfer of General ledger balances
              B. Transfer of open line items of General ledgers
              C. Transfer of asset and accumulated depreciation from one co code to another.
              D. Controlling transfer postings.
              E.  Customer / Vendor open items and balances transfer posting. Etc
    If someone knew about something more to be taken care of, please guide so that we can successfully complete the roll out.
    Please advice me, its urgent. if any one can give me his mobile to make me understood i can call to him .
    Thanks and regards
    Kuldeep singh

    if they want to a seperate P&L and B/S the why dont you make them as profit centers where you can take a P&L n B/S. at this level

  • KitKat roll-out for Yoga Tablets starting June

    Well, first of all I think, that this news deserve a separate topic, so please don't merge it with another one. Finally a Lenovo employee from Poland provided information about the KitKat roll-out for Yoga Tablets. For Wi-Fi version starting 9th of June and for the 3G version starting 23rd of June. Check out this link: LINK and here in German: LINK 
    Solved!
    Go to Solution.

    I rang Lenovo Support to see if I could get any further clarification on this and the person I spoke to cast doubt on whether KitKat would be coming to anything other than the soon to be released Yoga 10 HD+.  It was suggested that model would be released in May and receive the KitKat upgrade in June. 
    I mentioned media articles claiming that KitKat would be coming to all Yoga tablet models, and he gave the impression that support and updates for the original Yoga 8 and 10 models could end on release of the new model and that they may not even be capable of handling KitKat in any case. 
    I don't know whether that information is any more reliable or accurate than what has previously been posted, or is perhaps just more confusion and contradiction to add to the mix.

  • Error when I create the New material Master (MM01) for New Plant.

    Dear experts,
    I got the error when I create the New material Master (MM01) for New Plant.
    Error:  Valuation Area 2800 Not yet productive with Material Ledger.
    So Pl send me the solution asap.
    Venkata Raju Khottari

    Hi,
    Have u assinged Plant to Company code?
    If u say no, use T.code OX18.
    Regards,
    Murali
    Assign points if it is useful.

  • CO12- Yield quantity gets zeroed out for some plants.

    Hi Experts,
    While confirmation using CO12- collective confirmation, i get a message "Total confirmed quantity does not equal planned quantity"( ECC6.0 system). Moreover for  few plants, the yield is zeroed out, eventhough i enter the planned qty and after confirmation is executed, the yield shown is zero for those confirmed operations.
    1. Why does the message "Total confirmed quantity does not equal planned quantity" appear eventhough i enter the planned operation quantity for confirmation?
    2. Why does the yield quantity zeroed out for some plant? (maybe for some material also)?
    Any pointers would be of great help.
    Thanks,
    SudhaharN

    In OPk4, Confirmation parameters,  for ur plant and order type combinaation, check the tab "operation indiv.entry initial screen. "
    In that tick the Quantities PROPOSED..
    u ll get away from the issue...
    hope this helps..
    karthick

  • CO Activities for New Plant

    Dear Experts,
    I am an FI consultant and involving CO module also working for a Roll out Project.
    We already created a Co. Code, one Plant for New production (EOU) unit.    Now we are planning one more plant with Direct Sales activity.
    I want to prepare a Project Plan for CO.
    Can anybody give me gudelines, if a new plant created what is required for both FI & CO activities.
    Thanks in advance for your help.
    Regards,
    SS

    Hi,
    The main important things you need to configure regarding new plants are mentioned below:
    1. Standard Hierarchy - Profit center & Cost Center accounting
    2. The Automatic account assignments for Manual Posting ( this is a bit time consuming)
    Hope it helps.

  • For new Plant should we have to create a new sales organization?

    Hi Experts,
    I am going for one roll out project. In that we have to create new plant, so should i have to create new sales organization or else we can use the same. And also tell me what are the benefits & disadvantages of that.
    Thanks & Regards
    Chavi Patle
    Edited by: chavipatlesd on Jan 30, 2011 8:33 AM

    hi
    i will say only one logic here.
    if you define the plant or new plant you need to extend all the other organisational units for it right.
    then i there is no need for creation of new SALES ORGANISATION on the same.
    please take the advice of your PM in this regard he might be having different views from reporting perspective and might be your roll out project needs a new sales orgn or not.
    if you ask us thre is no need for creating a new sales organisation on the same.
    advantages:
    if there is a really need for creating a new sales orgn as wellas plant this mihgt be for reporting perspective only & analysis will be very clear.
    disadvantages:
    this is not a disadvantage but from Enterprise Structure point of view master data will increase ofcourse this master data is needed for smooth processing of SYSTEM
    hope this clears your issue.
    balajia

  • Release Strategy for New Plant

    Dear All,
    I have a Release strategy in my 3 Plants  and it is working fine.
    Now I want to add one more plant under the same release strategy.
    I tried to add the new Plant in CL24N. System allows me to add the same in this but the RS is not working in this new Plant.
    waiting for reply

    hi,
    you follow the following steps to insert new characteristics value in your release procedure.
    1. define the new characteristics value plant4 in your characteristics.
    2. assign the same characteristics value plant4 in classification of release strategy.
    3. run the release simulation and comes out.
    4. now create PO for your requirment and save it.
    5. u can use me22n/23n to view your release status of po.
    hope it helps....
    manoj singh

  • Roll out of New BB 10 OS 10.2.1

    We  are still not having this new OS available in India......
    Any idea regarding the timeframe of this roll out in India?????
    Thanks..

    Quite an interesting response from them! Not accurate either...whoever you spoke to was somewhat poorly trained (or, perhaps excellently trained at fobbing their customers off!!). The carriers control completely the normal distribution of OS updates to their end users. This is how it is, and has always been, with BBs.
    Further, by posting here on this site, you are not achieving a "check with BlackBerry", for this site is a user-to-user community, not a user-to/from-BB conduit of communication.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IOS is Rolling out a New update:  8.2

    Just seen this from this source: Phone Dog  that iOS 8.2 is rolling out to ipad,  iphone and ipod to see this latest update jump over too phone dog at the Link below
    iOS 8.2 now rolling out to iPhone, iPad, and iPod touch devices | PhoneDog

    The best advice I can offer for your iTunes problems is to try creating a new test user on your computer. Check to see if iTunes behaves the same way in the new user.
    As for your iPod issues, you should try restoring your iPod via iTunes, erasing all software and content components on the device. Once the device is restored, do not restore from backup and do not sync any of your content.
    You mentioned that you use Notes and Contacts. You want to make sure that you email yourself your notes from the application and assure that you've got all your contacts synced with your computer.
    Use the iPod in its restored state for a few hours. If you notice a favorable difference, begin to start syncing your content back over.
    Good luck!

  • BlackBerry 10.2 OS Begins Roll Out for the Z10

    Read more here:
    BlackBerry 10.2 OS Begins Roll Out
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

    The unlocked part really doesn't come into play.
    It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
    How to Reload your Blackberry10 OS
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • BlackBerry 10.2 OS Begins Roll Out for the Q5

    Read more here:
    BlackBerry 10.2 OS Begins Roll Out
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

    The unlocked part really doesn't come into play.
    It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
    How to Reload your Blackberry10 OS
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • BlackBerry 10.2 OS Begins Roll Out, for the Q10

    Read more here:
    BlackBerry 10.2 OS Begins Roll Out
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

    The unlocked part really doesn't come into play.
    It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
    How to Reload your Blackberry10 OS
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Create/extend materials for new plant with new profit centers

    Hi.
    We have created a new plant and want to create/extend the materials from an existing plant to the new plant (with new profit center). Can this be done via MM17?
    Regards,
    Kjettern

    Hi Kjettern,
    To extend the existing material to a new Plant/Profit centre, pls follow the following steps: -
    1. Copy down the material number (i.e XYZ) you want to extend.
    2. Go to t-code MM01.
    3. Enter the material number (i.e. XYZ) you copied from (1) into the Material field and hit ENTER.
    4. You will get an information on the bottom that "the material type XXX and the industry sector YYY has been copied from master record".
    5. Pls note that Basic Data 1 & 2 is not changeable as the same set of material data will be used when a material is extended.
    6. Hit ENTER again. To change other details other than Basic Data 1 & 2, select the views that you want.
    7. You will be prompted to enter a Plant. Here you must enter the new Plant that you want to extend the material to and hit ENTER.
    8. You will get a confirmation stating that the material already existed and will be extended (to the desired Plant u entered in (7)).
    9. Ensure that all the data in all the important tabs are maintained, for the right Storage Location, Warehouse Num, Moving Average Price, Standard Price etc. before proceed further.
    10. Hit Save. You will get a msg that "Material XYZ created".
    Now you are able to use this material number in the new Plant you created.
    Hope this helps.
    Rgds.

  • Reoprt execution time out for particular Plant

    Hi GURUS,
    I am having ECC6.0 with MSSQL2005 combination here. One of my Sales register report executes fine with local plants but for plant which is about 2000 Km from here it gets timed out when executed. So i ran that report in background. It successfully got executed but when i click on spool button to get the report then it shows me only first 10 Pages and when i try to change it say 30 Pages then popup appears as "Displaying 30 pages may cause memory Overflow". Now what is the solution on this issue as there are 548 Pages in this report. Please help. Kindly suggest if any particular Printing format is needed for the same. End users use to download this data in excel sheet just to view the details. It is working fine for local plants. Is there any network or Database issue??
    Regards,
    Vaibhav gore

    Vaibhav,
    The report of which you speak exceeds this time limit when running for this particular plant .  This is common.  Assuming that your company does not wish to increase the interactive time limit, the normal solution is to run the report in background, as you have done.
    The spoolfile warning message that you got was valid, but it is unlikely that the memory problem will actually occur in a normal business environment.  If it does, then it means that the memory (hardware) for your system is grossly undersized for the normal business load.  I suggest you proceed with reading the spoolfile in spite of the warning.  You can make the warning stop occurring by setting your user parameters once.  SP01>display your file.  When the file is displayed, clik on the settings button, make the settings large enough to accommodate the largest report.  Now check the 'Save settings section' to
    'Permanently even betw logons'.  You will always then default to the larger page settings, thus preventing the annoying warning message.
    Getting a spoolfile into Excel can be tricky, but it is not rocket science.  You may have to experiment a bit.
    One way:
    1.  With the report displayed in it's entirety in SP01, clik Spool Request>Forward>Save to Local File
    2.  Select 'unconverted' or 'spreadsheet'.  'Unconverted' saves as a straight text file, 'spreadsheet' saves as a tab delimited file.  Here is the tricky part.  Depending on the type of data in your report, you may be able to save a step by saving as 'spreadsheet' and giving the filename as 'blahblahreport.XLS', using the standard excel suffix.  Depending on the contents of the report, you may get Excel to properly interpret all the cells to your satisfaction.  Sometimes, though, this will not work.  Dates may become numbers, text fields may appear as numbers, etc etc.
    3.  Assuming that you downloaded the report without the filename suffix,   now open Excel, and select File>Open.  select 'All files' for filetype.  Open your file in excel.
    4.  You will usually be presented with a single column of data, with each cell in the column representing a row in the report.  Select the Column and then select Data>Text to columns.  Parse the data to your specifications.  Once completed, save the file as an XLS spreadsheet.
    There are a number of variations on this theme.  Your local Excel spreadsheet expert should be able to assist you.
    Rgds,
    DB49

Maybe you are looking for

  • MacBook Pro Retina (Mid-2014) Cannot Boot Camp

    Hi all, I'm running OS X Yosemite (10.10.2) on my MacBook Pro Retina 13" (Mid 2014). I have tried to boot camp the machine but it's not working. After boot camp assistant has created the Windows 8.1 installation disk and saved all the drivers and sof

  • Zen Vision M 30gB: How Do You Add DVD Movi

    Just received this player as a gift from a friend. I think he got it at DELL. It was easy adding Music and it sounds great. I have to figure out how to use the Equilizer, Smart Sound (keeps sound levels constant) and Bass Boost...to arri've at the be

  • Looping in XI

    Hi All, is there is any other way to perform loop other than BPM in XI.Can you please help me in this doubt? Regards, Rama

  • Can create 52 publication, but creating 53rd leads to problems

    Hello, My apologies in advance for a long post, but I was really trying to make sure I do my due diligence before turning to the community for help, so here it goes. I am working on a proof of concept with the purpose of using transactional replicati

  • Caching images in runtime for textflow or text area

    Hi, I am building a chat app, each user has a picture.  So each time a user talks, I display their picture along side with what they typed.  I only know the URL of the picture at run time.  Here's what I'm trying to do: var p:ParagraphElement = new P