Rolling Back - Need help with Install

Hiya Folks,
I have decided to roll back versions as we need to keep running our test cases with VB support. The version I have found is 8.3. I think that one is pretty good.
I am struggling to install the Eme Database... Where is the install for that? Is it seperate to the ets830.exe?
If any of you have any installation docs that explains how to install from scratch i would appreciate it.
I would like to install the E-load and Emanager on my local machine, but the eme database on one of our SQL boxes.
Thanks peeps
-Paul

The last "Full Retail" DVD contained 10.6.3.
I expect that MacBook Pro cannot run 10.6.3, but needs a later version. You cannot run an earlier version thatn the one that shipped on it when the Hardware was first introduced.
Call AppleCare with your serial number in hand. Ask for a specialist in your computer type. Ask for the 10.6 version that shipped with your Macwhen introduced. If it is available, they will send it to you for a nominal fee.
Mac OS X versions (builds) for computers
If yours is an October model, they simply will not run 10.6.anything.

Similar Messages

  • Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

    Installing Elements 11 on Mac 10.8.2. Need help with install error:  Setup wants to make changes. Type your password to allow this."  After entering Adobe password, nothing happens.  Locked from further installation.  Any ideas?  Adobe phone support could not help.

    Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

  • Need help with installing on Photosmart C7280 all-in-one

    I did have my printer installed, and was using the printer for 3 laptops wireless within my home.  Now I can not even find my Backup disk, so i need help with downloading the software to use my printer, and also get it back to being used wireless.   I do not know what happened, but the fax for this printer is listed, just not the printer itself.   please help!
    This question was solved.
    View Solution.

    Click here to download the software for your printer:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3204785&lc=en&cc=us&dlc=en&lang=en&cc=us
    chose the appropriate operating system that corresponds to your computer and download the full feature software.
    Please click on KUDOS if you find my solution helpful.

  • Need help with Installing Canon LBP 2900B on Macbook Pro OSX 10.6.8

    I know this is going to sound silly, but really need help with this, URGENTLY!!!
    Bought a Canon LBP2900B printer more than a year ago, and was using it on my MacBook Pro with OSX Snow Leopard (10.6.8) very well. My hard disk recently crashed and now I cannot reinstall the printer, nor can I find the driver for it anywhere for the Mac.
    Have searched all the forums and followed all discussion threads on the Apple Communities as well, but none of the solutions seem to work. Even went back to @Dexter's solution with trying to download the file from the link http://boolet.free.fr/CAPT.zip (this is what I had done when I bought the printer, and it worked perfectly) but the link doesn't exist anymore.
    Extremely grateful if anyone can put up a solution to this, or alternatively, IF ANYONE HAS THE OLD CAPT.ZIP FILE AND CAN UPLOAD IT.
    Thanks in advance. Look forward to your solutions.
    Cheers

    Depends on how the partitons are arranged. If they're exactly as quoted, then yes.
    Open Disk Utility and select the partition tab.
    In the diagram, the top partition needs to be the one you're booted from, and partition 2 the middle one.
    Select Partiton 2 so that it's highlighted, and click the '-' button below the diagram.
    Drag the bottom right corner of partition 1 down to meet partition 3.

  • Need help with installing Yahoo style flash menu CS5

    I downloaded the Yahoo style menu bar from the the available widgets.  I got the menu bar to show in Dreamweaver, but need help:
    I have trouble understanding how to use the f-source  flash editor to edit the links.
    I don't seem to be able to drop the  f-source.com button from the menu bar.
    The bar  shows up as a tiny bar in IE8, not as I had programmed it in the widget programmer.
    I was instructed to Insert ==> f-source menus ==> Edit menu in Dreamweaver.  Doing this leads to the following message: "Install at least one f-source menu'.  I did install the f-source-UI G file in the Adobe Extension Manager CS5.  What else needs to be installed?  
    My OS is Windows7 and I am working with Dreamweaver CS5.  Please help.
    Thanks,
    Tony Uythoven

    Flash menus (Flash navigation, period) is a terrible thing from a functional standpoint. It looks really nice, but the honeymoon ends there. As far as SEO goes, your entire site, beyond the landing page, is invisible. A search robot will only see an embeded Flash object.
    You have to ask yourself a basic question.
    1. What is the purpose of building a website and putting it online?
    If it's for your own personal enjoyment and nothing more, then a Flash menu may be for you. If it's for a business or band, or a political group or social group, and you want people to be able to find it in Google, Yahoo, Bing, etc. then you want as many indexible links as possible on your landing page so they will show up in related searches like schedules, articles, galleries, etc.

  • Need Help with Installing AP 1250

    I am installing AP 1250 with wireless client authenticating to radius server running on MS ISA server.   The users are supposed to be authenticating with AD.  So far I have been running into problems and unable to get any user connected via Wireless LAN. 
    I would like your feedback if the configuration is good on the AP. Do I need tweak it to work?   The plan is to install one and then install the rest of the 3 more APs in the infrastructure.   I would like to get the one up and running first.  
    I would like any suggestion to enhance my configuration and design guidance.   Also need help for ISA configuration.
    Config from AP
        hostname cisco1-ap
        aaa new-model
        aaa group server radius rad_eap
         server 10.1.2.25 auth-port 1812 acct-port 1813
        aaa group server radius rad_acct
         server 10.1.2.25 auth-port 1812 acct-port 1813
        aaa group server radius rad_admin
        aaa group server tacacs+ tac_admin
        aaa group server radius rad_pmip
        aaa group server radius dummy
        aaa group server radius rad_mac
        aaa authentication login default local
        aaa authentication login eap_methods group rad_eap
        aaa authentication login mac_methods local
        aaa authorization exec default local
        aaa accounting network acct_methods start-stop group rad_acct
        dot11 ssid ABCD123
         authentication open eap eap_methods
         authentication network-eap eap_methods
         authentication key-management wpa
         guest-mode
         infrastructure-ssid optional
        power inline negotiation injector installed
        bridge irb
        interface Dot11Radio0
         no ip address
         no ip route-cache
         encryption mode ciphers tkip
         ssid ABCD123
         station-role root
         rts threshold 2312
         no dot11 extension aironet
         bridge-group 1
        bridge-group 1 subscriber-loop-control
         bridge-group 1 block-unknown-source
         no bridge-group 1 source-learning
         no bridge-group 1 unicast-flooding
         bridge-group 1 spanning-disabled
        interface Dot11Radio1
        shutdown
        interface FastEthernet0
         no ip address
         no ip route-cache
         speed 100
         full-duplex
         bridge-group 1
         no bridge-group 1 source-learning
         bridge-group 1 spanning-disabled
        ip http server
        ip http authentication aaa
        no ip http secure-server
        ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
        ip radius source-interface BVI1
        radius-server attribute 32 include-in-access-req format %h
        radius-server host 10.1.2.25 auth-port 1812 acct-port 1813 key 0 XXX-XXX-XXX-X
        radius-server deadtime 5
        radius-server vsa send accounting
        radius-server vsa send authentication
        bridge 1 route ip
        line con 0
        line vty 0 4

    It is IAS and not ISA server.  I apologies for the confusion it might have caused you. 

  • Need help with Installing Flash 9

    First off, let me apologize if this is in the wrong forum, I couldn't really find a forum for my specific need.
    I was running Flash 8 just fine, but then a video requested that I update to Flash 9, because that's the only way the video would play.
    So I tried installing the PPC version, and right at the last file it needs to finish installing a window pops up saying "ERROR CREATING FILE, 1008:5,-5000 Access denied error."
    Now all flash files won't work on my browser.

    Did you enable "root user" according to "Mac Help" or did you set up a new user in the system preferences? If you did it according to Mac Help, then Flash should have been installed correctly. Did you try the other option first? That option, if it worked, would have installed Flash into the current user. How many different users do you have?
    Post back if you still need help, maybe someone else will pick up on this that is better than I am about such problems.
    Sorry that I haven't been much help.
    Larry

  • Need help with installing drivers

    I recently installed Windows 7 Professional and have been having trouble with installing the drivers necessary for sound, USB, graphics, etc. I have the Windows drivers on an external drive, but the OS won't recognize an external drive because it needs the drivers to do so. My Macbook came with OS X 10.6 installed, but I have since upgraded to 10.7 through the App Store. I believe I can use my 10.6 factory DVD to install drivers on the Windows side, but if I have 10.7 installed, will it work right? I'm confused

    IME driver is one of the very most important. TPM is only needed if you plan on using it. If you don't know what it is, then probably don't need it.
    Quote
    Please tell me in detail what drivers do what functions and which ones need to install ?
    Most of them are pretty self explanatory. Unless you set the SATA controller to AHCI mode when the OS was installed, RST isn't going to do much.
    Like Henry said. Everything is on the install disc that came with the mainboard you need, including the ones you don't need. It's even got a 'total install' selection. 

  • Need help with installing old version of firmware

    I would like to revert to an old version of firmware for my Airport Extreme base station. I have read in a number of postings that this would possibly help with the problem of my Canon Pixma ip3000 not working after the firmware was usdated. When I tried to install the old firmware, the Installer would not allow it, there was just a message that the software was up to date. Could anyone please give a step by step description of how this can be done? Is there a way around the Installer? Thanks.

    The firmware supplied with the base station was 4.1. After installing it, everything worked just fine, including wireless printing to a Canon Pixma ip3000. At one point, after being prompted by a message onscreen to upgrade to 4.2, I did the download and installation, and that is when all the problems started. No wireless printing, and I can't seem to use the Airport Admin or Assistant (not responding). Since then I have also upgraded the OS to 10.4.5.
    I am trying to downgrade to 4.1 since that is what worked initially and what was suggested in another posting I read.
    I did look at the information for the various parts of Airport and noticed that the Setup Asistant is 4.2, the Admin Utility is 4.2 and the base station is 5.5.1. Could this be affecting the problem as well?
    I will try downgrading using the link you provided. Thanks very much.

  • Need help with installing app.

    I need help installing .jar file on my Droid phone.

    Oh, man, the last time I heard of a .JAR file was on a Motorola Razr!
    That ain't goin' on a Droid....
    Unless you have some more context to share about this.....
    Geri O

  • Need Help with install of Final Cut Pro HD

    Hi
    I am tryting to install FCP Express HD on my G4 Ibook and I get a strange error message. It was able to instaLL fine but when I got to run the program I get this message
    Can't install unable to find easy setup file please reinstall and try again.
    I have uninstalled and resinstalled 2x any ideas
    Ibook g4   Mac OS X (10.4.3)  

    Make sure you uninstall all the components of Final Cut. Do a search on your Finder. Then install from the installation disc. If this doesn't work you should contact Apple for help with installation issues. The disc may be defective.

  • Need help with installing Windows XP on Satellite A60

    I have toshiba satellite A60 and I need to know steps of reformatting the hard drive and installing Winxp. what do i need and how?
    also..how can i save all the files and emails on Microsoft outlook? i'm not well experienced with this.

    Hi,
    the installation of XP is very simple. You just have to put the CD in and start the installation, the installation wizard is guiding you through the whole process. A little advice: when it comes to partition the drive, you should delete the old partition, create a new one and format it with ntfs. Dont worry the installation wizard will guide you very detailed trough that process so it will go very easily.
    Regarding your backup:
    Thats my way to backup my files:
    I have a external USB-HDD drive and I put all my files on it so I can copy them back after I install a new system. To save your outlook you can check this site:
    http://www.sitedeveloper.ws/tutorials/outlook.htm
    They describe very nice how to backup you outlook.
    Good luck
    Greets

  • Need help with installing Ubuntu on Lenovo Ideapad Z500.

    I just bought a new Lenovo Ideapad Z500 yesterday. It came with Windows 8 pre-installed. Now, I also want to install Ubuntu over it. The disk is partitioned as follows:
    Disk C: - 880 GB (approx)
    Disk D: - 30 GB (approx) (I don't remember exact partition, as my laptop is currently at my home).
    Then I thought, I would better re-partition the C drive into 1 or 2 small drives. So, I shrinked the C drive by going into "Disk Management", and then created 3 more partitions - 240 GB * 2, 300 GB * 1, and left the C drive with 100 GB space. I didn't modified the D drive.
    Till then I didn't went through any infomation over internet. But, now when I went through this forum, I found out that my OKR won't work now, that I still have to confirm when I go home. So, now I'm worried. I scanned through so many post here, and no where found a way to install Ubuntu on Ideapad Z500.
    I also read that it will be possible to run OKR, if I can re-store the partition to it's original. I think this can be done, since I just have to remove the volume I created, and allocate the memory back to C drive. And it will be back to original state, as I didn't modify D drive (correct me if am wrong, or if it can't happen).
    So, the major question that I want to ask is, is there no way to partition my disk, and install Ubuntu in one of them. 

    hi rohitjain-rj,
    Welcome to the Lenovo Forums.
    On a Z400 Touch running on Windows 8 preload, shrinking the the C-Drive under Disk Management and creating multiple partitions on the unallocated space and then reverting the partition back to original made the One Key Recovery work as normal - haven't tested this yet on the Z500 as there's no available unit but chances are, it may also work.
    In installing Ubuntu, have you tried to install Ubuntu via Wubi ?
    If Ubuntu doesn't start, boot into the BIOS (press the OKR button > select BIOS Setup Utility) and set the following:
    Boot Tab
    Boot Mode - Legacy Support
    Boot Priority - Legacy First
    Exit Tab
    OS Optimized Defaults - Other OS
    Regards.
    neokenchi
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Need HELP with installing snow leopard!!

    I am trying to install snow leopard on my one year old iMac. Install is successful. Restate works. But then I get the spinning wheel with a blank screen. No dock...no hard drive icon...nothing. I reminded from the disc twice and still the same thing. Help!!! Need suggestions.

    Before you go off and buy anything I suspect your machine came with Leopard on it (V10.5.x) and you bought your machine during the transition time where Snow Leopard (10.6.x) just came out and Apple was giving upgrades to customers buying during the transition. If that is the case your machine should work fine with the 10.6.x disc you were provided. You should have received a 10.5.x and 10.6.x disc if that is the case, you can easily tell by looking at the media.
    Click on the Apple symbol in the upper left of your screen and see what version of OS X is loaded on your system. If it's 10.5.x then you know you're on Leopard. If you want to upgrade to Snow Leopard there are some things every user should do prior to upgrading. First is BACKUP your system either using Time Machine or create a clone using SuperDuper or Carbon Copy Cloner. A backup is the #1 priority.
    Next then you can simply pop the Snow Leopard 10.6.x disc in your computer and follow the on-screen instructions. If for some reason it doesn't work then contact Apple.

  • Need help with installing Symbol so student can graduate

    After using OS X exclusively for the last 5 years, I now find that I need to use Framemaker on OS 9 in order to help a student of mine finish his thesis. I've installed Framemaker, but when I try to run it, it says it's missing the Symbol font, then quits. I have no idea why it's missing, and for the life of me, I can't remember how to install a font in OS 9.
    Can anyone tell me where I can find an OS 9 compatible version of the Symbol font, and how to install it?

    Hi, Gary, and welcome to Apple Discussions. Symbol is a standard font that's normally installed with OS 9. Many people don't use it, so it is often trashed. If you don't have access to a computer that is running OS 9 and has the font installed on it, you can extract a copy from the Installer Tome on any OS 9 installer CD using TomeViewer. Once you've done so, place it in the Fonts folder inside OS 9's System Folder, restart the Mac, and it should be available in the Fonts menu of all your OS 9 applications.

Maybe you are looking for

  • How to set up and use to Java fax machine

    How to setup and use the fax utilies on the c410a allin one smakphoto printer.

  • 802.1x Empty userId

    Hi, I´m studying the behaviour of the 802.1x protocol working in a Windows environment with IAS and AD activated. I´m using Windows 2000/XP 802.1x clients to perform the tests. As I check the option "Authenticate the user as guest when the credential

  • Add additional Interface at a ACE in HA and to an alredy active context

                       Hello, I have a question about the ACE 4710. I have running two boxes in Active / Hotstandby mode. At the boxes there is running an admin context and addtionally a Loadbalancing context. There are alredy 3 VLAN's where the boxes do

  • EBC Discussion

    In a particular configuration, there are two applets in a view. The top applet is based on Siebel BC (Acccount) and the below applet is a list applet based on EBC. The user navigates to this view as follows: 1. Search for a particular Account 2. Dril

  • Images look lousy on retinal display macbook pro brand new

    Just bought a new 15 inch MacBook Pro with retinal display. My images look awful in Photoshop CC and Bridge. Apparently there are no updates that I don't already have. Any suggestions?