Rotate square and bring it to the front

Hi,
i would like to draw a square which is displayed angular before and will be then brought to the front so you see it frontal. (for example by using a JSlider).
i have here a little drawing where i tried do draw what i want to do
bringingToFront
does anybody know how i can realize this in a convenient way?
pat

Well that depends upon your picking strategy, if you have one. Basically you perform operations on the Transform3D co-ords of the TransformGroup your object belongs to.
See SwingInteraction.java in the examples package for a neat thread safe design pattern at
http://download.java.net/media/java3d/examples/1.4.0/j3d-examples-1_4_0-src.zip
from the downloads page at
https://java3d.dev.java.net/binary-builds.html
regards

Similar Messages

  • Overdrive Media Console/iPhone Problem Resolved-"iTunes is not responding, bring iTunes to the front and check status.

    I could not download books from Overdrive Media Console from my iMac desktop. I realized if I turned off iTunes Match in my iphone, it fixed the problem. On your iphone...Go to "Setting", scroll down to "Music" and turn off iTunes Match. i Tunes match is a music subscription service that I had purchased a few weeks ago. I could not figure out when I tried to download audiobooks from Overdrive I got the following message "iTunes is not responding, bring iTunes to the front and check status". Problem solved. I hope this helps others who are experiencing the same problem!

    I'm assuming you are talking about audiobooks and if so, just download all the parts in overdrive media console then locate them in your finder. Go into Itunes and go File > Add new files to Library. Go select all the mp3s and upload them onto your library. Sync your iPhone with it and that is what has worked for me Hope this helps!

  • Bringing JPanel to the front!!

    hi,
    I am using an JInternalFrame with some components like JTextField, JComboBox etc. Also, I am having a JPanel with some components which is to be displayed within the bounds of the JInternalFrame. If the JPanel is displayed, its components are mingled with the JInternalFrame components. I dont need that. Is there any way to display only the JPanel components as bringing it to the front. Please do reply. Thanks in advance.
    bhuvana

    hi,
    U are right. It is related to the Layout. Actually, I have set the Layout as null and specifically given the bounds for the components. What I need is that, I am having some components in a JFrame, with the same bounds I am displaying a JPanel with some components. But components of JFrame and JPanel are mingled with each other. But, I want to show only JPanel components on a button click by hiding JFrame's components and make JPanel components invisible on other button's click by hiding the JPanel's components. The point is that, I cannot make the JFrame's components invisible while showing JPanel's components. Is there any property to bring the JPanel front by hiding the others. Please do reply. thanks.
    bhuvana.

  • Why doesn't clicking on a Finder window always bring it to the front

    Right now on my screen I have two Finder windows. One is partially covered by the other.
    Clicking on the rear window does not bring it to the front. I've seen this happen many times already.
    Why wouldn't it come to the front and cover the current front window?
    Thanks,
    doug

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How to place an image in database and how to retrieve and display it in the front end

    how to place an image in database and how to retrieve and display it in the front end
    and to place an image in database and retrieve the image from database using xml
    please,help me out.

    Create a table with a Long RAW Datatype column for storing the Image Column Data.
    Create the form based on the table , which by defaults the column with LONG RAW atatype to a Image Item.
    You can use Forms Built in function READ_IMAGE_FILE to read a Image file stored on the file system in to the image item.
    A save on the form saves the image in the Image item in the long raw column.

  • I recently spilled liquid on my computer, but it is up and running, it loads and brings me to the safe boot screen where I need to type my password, but It is not recognizing it, help! How do I get passed it or fix it!

    I recently spilled liquid on my computer, but it is up and running, it loads and brings me to the safe boot screen where I need to type my password, but It is not recognizing it, help! How do I get passed it or fix it! I have tried holding the apple key and "s" and then type in the code to reset the password, but my keyboard is not letting me use the numbers or any keys that are accessed by holding shift! Please help me get passed this screen

    Fluids and electronics do not mix.
    You have caused some serious damage to parts of your computer, and likely voided the warranty until Apple completes a repair and re-certifies it.
    Step one is to turn it off and do NOT (did I say do NOT yet?) turn it on again yourself.
    Take it to an Apple store and be prepared for a large repair bill.
    Sorry, but that is the truth.

  • How can you pull in pdf's from iBooks and bring them into the Box app?

    How can you pull in pdf's from iBooks and bring them into the Box app?

    That sounds great, but I'm lost.
    I followed these steps:
    1) Open your PDF (in Adobe Acrobat Pro)
    2) Chose print
    The print/printer options pop-up will show.
    3) In the printer section, do not use your normal printer, a printer named Adobe PDF should be an option. Chose it.
    4) Under the "Page handling" section, change the Page Scaling drop-down menu to "Multiple pages per sheet".
    It works fine, but it looses all of the font information and the search no longer works. How can you do it and save the font info, so the search tool continues to operate.
    Am I missing anything?

  • Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

    Hi i am new to labview
    I want to extract data from a text file and display it on the front panel.
    How do i proceed??
    I have attached a file for your brief idea...
    Attachments:
    extract.jpg ‏3797 KB

    RoopeshV wrote:
    Hi,
    The below code shows how to read from txt file and display in the perticular fields.
    Why have you used waveform?
    Regards,
    Roopesh
    There are so many things wrong with this VI, I'm not even sure where to start.
    Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
    Not using Read From Spreadsheet File.
    Use of local variables to populate an array.
    Cannot insert values into an empty array.
    What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
    Also, how does this answer the poster's question?

  • How can I make a global change so all controls and indicators labels on the front panel change to another colour?

    How can I make a global change so all controls and indicators labels on the front panel change to another colour?
    I need to change the front panel so that it can be used in a dark environment.

    Hi
    The only way I see, is to use the "Controls[]" property and iterate through all of them. But don't forget about nested elements (i.e. clusters, tab-controls, ...).
    Thomas
    Using LV8.0
    Don't be afraid to rate a good answer...

  • I want to ask about iphone that the facetime is not working in UAE is that a problem ? and this problem affect the front camera "hardware"?

    i want to ask about iphone that the facetime is not working in UAE is that a problem ? and this problem affect the front camera "hardware"?

    minaaemile wrote:
    there somting is like not clear so  i think that the blocking of factime is affect the front camera so i want be sure if the front camera of iphone from UAE is like any iphone from another country and have the same quality ??
    The front-facing camera is available for use even without FaceTime.  If you are having issues with your front-facing camera, I suggest troubleshooting the issue:
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Bringing SubVI to the Front

    I'm developing an interface for monitoring experiments but require a separate VI to control pump hardware. The problem is I implemented the pump VI as a subVi is called from the monitoring interface with a button press. After calling it, I want upon another button press to bring the pump VI to the front if opened, if not I'd like to reopen it.
    Thanks  
    Solved!
    Go to Solution.

    here is a way. Make sure you have your subVI properties set to "open front panel when called" by pressing cntl+I -> window appearance. You only need one button with this. If the front panel is already open, it moves the fp to the front. If it's closed, it calls the VI.
    Note that if you have error wires going into your subVI, it wont react to any front panel activity from your main front panel while it is open if you open it via this method because of data flow. It will wait for the error cluster to return from the subVI before anything else happens. If this is the case, you will need to dynamically call the VI using an invoke node and the Run VI method. You would then put that in the false case instead. Should be straight forward though. This should give you an idea at least.
    Message Edited by for(imstuck) on 06-01-2010 07:57 AM
    CLA, LabVIEW Versions 2010-2013
    Attachments:
    openFP.PNG ‏18 KB

  • Captivate 7 - HTML5 Output and Interactions - coming to the front

    Hi all,
    Don't know if anyone else has had this issue.  I have found that when using inetractions with HTML5 output they automatically come to the front of the slide regardless of where you placed them in the story file. 
    I had used white rectangles to hide the interaction border but this now doesn't work in HTML5 (does the trick in SWF format).
    Any ideas?
    Cheers.

    Hi again Mayank,
    Little way down the road and it's not working .  I have been testing away and discovered several things.
    I started a new project and copy and pasted my slide from the main project with the accordian widget over to it.  This was initially not working when tested in HTML5 so i proceded to chop away stuff untill it worked.
    I discovered that if you have any objects with a shadow on the slide in any place (including not overlapping the widget) the whole widget breaks.  I also found that if you had a 'line' smart object anywhere that the whole widget breaks.
    Once i made sure i had no lines and shadows on the slide the widget then worked as expected with it staying at the back.
    However i have found that no matter what i do in my main project the widget never works, even when it is the only thing on a new slide?  This suggests a project wide issue and i have no idea what that could be.
    Is there a chance that the actual save of my project is the issue as it was created before i changed the code?  If so is there somthing i could change in the code of my save file to make it work?
    I thought maybe i could copy and paste the entire project into a new project but of course all the click boxes change back to continue which is a nightmare.
    EDIT: I just tried copying the entire project over to a new project and although all click boxes were on continue the slide with the widget worked fine (with the above amends).
    EDIT EDIT: Hah, okay i have now discovered that deleteing the images of my master slide allowed the original project to work with the above amends (lines and shadows removed) too?  So its the master slide thats the problem!

  • Bringing items to the front.

    I have 4 rotating pictures and each time they rotate I want one of them to be on top of the rest but yet the corners of the others to be visible underneath. Is there a way I can do this as it seems only the first one will be on top obviously because it's top in the layers

    In PPro, you will need to stack sections of your clips on different layers to get them into the order you want. Use the razor tool as necessary to cut clips into sections so you can manipulate the order.
    Alternatively, if you have After Effects, assign them to 3D layers and do the job properly.

  • I have used lightroom trial before, and i found it good. So i joined the lightroom and photoshop program yesterday. And I have downloaded the photoshop.  On the page of apps, I found out I have photoshop and lightroom, but on the front page, I have only d

    I have used lightroom trial before, and I found it good.  So i joined the lightroom and photoshop yesterday.  I have download the photoshop in the adobe creative cloud, but at the front page of adobe creative cloud, it shows that I have not download the lightroom.  I saw the lightroom is already downloaded in the apps of adobe creative cloud.  However, when I key in the icon of lightroom, I found out I have only 0 day and i need to buy.  So what can I do to get the lightroom?

    Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    OR
    http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

  • Why can i rotate screen and have sound at the same time.   Why is only option one or the other

    why cant i rotate and have sound at the sametime?  why does it have to be one or the other.   

    Do you really think it's not possible to do both and set them up the way that you want them to be set up? You just don't understand how the process works.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

Maybe you are looking for