Rotation of screen is not functioning

Rotation of my ipad air screen is not functional. I tried all possibilities at control center ,but it's displaying horizontal alignment only. Please advice.

The home button is the one on the front with the squarish circle on it, the sleep/power button is on the top/side (depending on how you're holding it....you'll have two buttons together, which is hte volume/rotation lock and then around the edge from that is the sleep button)
http://www.apple.com/ipad-air/specs/
halfway down the page it shows you what button is where

Similar Messages

  • My send button on the iMessage screen will not function. I have tried it in every screen position ie. rotated the screen 90 degrees each time. With no results.  Any suggestions?

    My send button in iMessage does not function. I have tried it in every position ie rotated the screen 90 degrees each time but still will not send the message.  Any ideas or sugestions?

    Try this:
    First you can try signing out messages and then back in.
    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • Touch screen will not function on email

    Hi, the touch screen on my Iphone 4 will not function when I open email.  It seems to work with all other apps/areas on the phone.  In addition, I cannot power off as the power off button does nothing, nor can I do a hard reset.  Has anyone else had this problem or know what I can do to fix this?  Thank you!

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iOS: Device unexpectedly restarts, displays Apple logo, or powers off
    http://support.apple.com/kb/TS5356
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
     Cheers, Tom

  • HT2292 Phone indicates connection to itunes on screen, will not function, after rebooting the itunes connection screen is still there.

    While downloading update, itune connection screen will not go away, phone will not work even after rebooting with itunes connection screen reappearing

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • Photo Screen Saver not functioning with Yosemite Upgrade

    Recently I upgraded my MacBook Pro to Yosemite. I have always used a folder in iPhoto for my screen saver via system preferences. Ever since the upgrade this folder will no longer function as the screen saver.  The screen saver option in System Preferences always defaults to Apples National Geographic photos that is installed with Yosemite. After I select the folder I want I "preview" the screen saver and my photos are there. Once the screen saver kicks itself in, the NG photos are there and the system settings are back to NG photos and not my photos. Now, I will admit the NG photos are far above my photos, but I really prefer my photos. Is Apple evaluating photo quality on the screen savers? Kidding - any ideas?
    Scott

    I have the same issue.
    Try this. I think this has worked for me. Only time will tell.
    This solved my question by dominic23 on Oct 22, 2014 4:33 PM
    Close all windows and quit all applications.
    Hold the option key down and click the "Go" menu in the Finder menubar.
    Select "Library" from the dropdown, then "Preferences" folder.
    Look for these two files.
    com.apple.desktop.plist
    com.apple.systempreferences.plist
    Right click each  one of those and select " Move To Trash" from the contextual menu.
    Restart the computer.

  • Auto rotation of Screen is not working

    Hello Sir,
    I had problem with my Lenovo IdeaPad A1_07,
    Kindly Suggest me how to rectified the same.
    Thnaks
    Naveen Kumar

    kittu,
    Welcome to the forum!  Congratulations on your new A1... nice tablet.
    Have you checked the position of the screen rotate lock swich?
    Try this article...http://forums.lenovo.com/t5/IdeaPad-Slate-Tablets-Knowledge/A1-Screen-stopped-rotating/ta-p/656545
    Hopefully, that's the problem.  Just slide the switch to the other position and try again.
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • IPad Mini Screen is not functioning correctly

    so recently i took my ipad mini into the car and its pretty hot in there, but not as hot as to make you break a sweat- just pretty clammy. my ipad was charged around 70-80% and i put the brightness all the way up so i could see the screen display. This worked for a while, until i opened an app and the ipad suddenly shut off- or at least the screen went black. I tried to restart it and held down on the power button for 10+ seconds. I couldnt see anything, so i figured i would need to charge it- but it was more than halfway charged so this really confused me.
    Then i started searching online- a couple of people on a few forums had the same problem- i tried holding both the home and power button for 10 seconds- nothing happened. I tried smacking my ipad (like what the forum said) and nothing happened. I tried connecting it to itunes and i heard the charging noise. Then finally, i went into a dark room and used a flashlight to angle at it and i could see the screen only faintly- the sounds work- i hear the keys click and My email and messages being recieved but the screen is just too dark to be even slightly noticeable in natural light. I tried working with the brightness but no matter where i slid it- it stayed the same. I can really only play music but that would still take a hassle to set up. All my other apps work but i am not able to use them because of how dim the screen is. I use my ipad for everything- school, digital art, the works... any suggestions?

    Try resetting it again. HOld down the sleep and home for 10-20 seconds or so, until you see the silver apple. See if it reboots.
    if that doesn't help, then you may want to look into restoring your device
    http://support.apple.com/kb/HT1414
    If that doesn't work then it may be time to make an appointment at your local apple store and have the techs check it out

  • My ipod spent the night in contact solution and the screen does not function anymore but my computer recognized and synced. Is there a way to have it repaired by apple?

    I need help! My ipod is expired on warranty but it has water damage to the screen-- is there a way/is it possible to have it fixed or do I need to get an entirely new ipod? It did sync to my computer when connected but I could not view anything on the screen itself.

    is there a way/is it possible to have it fixed or do I need to get an entirely new ipod?
    No one here can answer that unless they can physically examine your iPod.  Just take the iPod to an Apple store or an AASP.  Whichever is more convenient for you.  The repair techs there can answer your questions.

  • ARD 3 : Custom "Lock Screen Picture" not functional?

    It seems as though things have changed with the way that the Lock Screen Picture feature is handled from ARD 2, whereas now the only working solution I have found is to swap out the Lock.jpg file located in "/System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/S upport/LockScreen.app/Contents/Resources".
    Obviously this is not an elegant solution, but at the present it seems to be the only approach I have found that works.
    Has anyone been able to get the documented approach to work? Is there a different way that is easier to deploy?

    As per the subject of this post, that technique does not seem to work now.
    I've attempted the following:
    - a custom "Lock Screen Picture" w/ and w/o an extension in /Library/Preferences
    - w/ Quicktime & Preview as the associated applications
    - a copy of the original Lock.jpg from the package as the file
    None of these things work, whereas the approach I mention earlier does.
    I guess I should have reiterated in the body of my message that the solution you point out is not working (at least for me).
    S
    FYI - it is still page 139 in the final manual, but now part of Chapter 8.

  • Touch screen will not function on settings app

    went to settings to change something and screen is frozen.  will not move in any direction with touch of finger.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iOS: Device unexpectedly restarts, displays Apple logo, or powers off
    http://support.apple.com/kb/TS5356
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
     Cheers, Tom

  • Custom "Lock Screen Picture" not functional?

    Hi, the Remote Desktop manual method of changing the lock screen picture still doesn't work for me.
    Am I doing something wrong?
    Method from Apple Remote Desktop Manual:
    1 Create a picture using a graphics program, such as AppleWorks.
    2 Save the picture in PICT, TIFF, GIF, JPEG, or any other QuickTime-compatible static image
    format.
    QuickTime-compatible movies or QuickTime VR objects cannot be used.
    3 Name the picture “Lock Screen Picture”.
    4 Copy the “Lock Screen Picture” file to /Library/Preferences/ on the client computer.
    PowerMac G5 Dual 2.3ghz   Mac OS X (10.4.8)  

    The method listed in the manual has never worked and still doesn't, as far as know, with 3.1, though I haven't tested it with 3.1 myself yet. The only working solution I have found is to swap out the Lock.jpg file located in
    "/System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources".
    Regards.

  • TS1398 My on/off toggle in the Wi-Fi screen is not functioning.

    Anyone have a solution?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • I can not rotate the screen writing a sms to write it horizontaly.

    I have a one touch fire Alcatel and when writing an SMS can do it only verticaly, can not rotate the screen
    to write it horizontally.
    I would like to know id it may be a software problem ir just cant do it.
    Thanks.

    Hello!
    This function is currently not available in Firefox OS for the Messages Application. We are working towards to making this available. At the same time, you can file a bug for this feature to be made if somebody hasn't done so already. You can file a bug here: https://bugzilla.mozilla.org
    Please report back with the bug number or a link to the bug so we can keep track.
    Thank you!

  • My iphone 4 photo auto rotation was not functioning, might be accidentally locked as I can see a locked symbol with a circle with an arroe surrounding it at the top right angle , next to the power % indicator. Please advise how to unlock it.

    My iphone 4 photo/message auto rotation was not functioning, might be accidentally locked as I can see a locked symbol with a circle with an arroe surrounding it at the top right angle , next to the power % indicator. This function was working perfectly since day 1.
    Please advise how to unlock it.

    Swipe upwards from the bottom of the screen to open Control Center. You will then find the orientation lock in the top row, last icon on the right. White is on, black is off. Tap and turn it off. If you see the lock symbol, then orientation lock is on, and that is what is keeping it in the portrait mode.

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

Maybe you are looking for

  • ALV - Find problem

    Hello, I have problem of find value in alv table. By choosing some variant I get table with 500 lines and 70 columns. When I use FIND icon of ALV to find specific order number (after selecting the column), the FIND "works" only for first rows and doe

  • Vendor Advance

    Hi we are creating a vendor down payment using F-48. However, on the vendor line item, system is asking for tax code field as being compulsory. I have checked the field status of the Reconcilliation Account for Vendor and the Posting Key. The Tax cod

  • Using Authorization group field in Data entry profile

    Hi, I would need some help in configuring/using the authorization group field in data entry profile. After setting up the values in the drop down, how do we link to the authorization profiles or roles . basically, I would like to know the steps/activ

  • Data modeling tool: physical model migration

    Hi, I have imported my relational model with a generated physical model for oracle 9i. I'd like to migrate my DB to oracle 10g, but I don't feel like creating a new physical model for Oracle 10g from the scratch and configuring it all. Is there any w

  • LAP1231G to Autonomous mode

    I followed instruction from cisco web site to change LAP1231G to autonomous mode without controller. I get follwing error message when AP tries to connect local tftp server. image_recovery: Download default IOS tar image tftp://255.255.255.255/c1200-