Rounding up the billing amount
Dear SAP Gurus and Experts,
Would like to seek for your assistant to kindly provide guide to configure the rounding up and down value in the billing amount where by
if the amount is $8.02, it will be shown as $8.00 and
if the amount is $8.06, it will be shown as $8.05, and
if it is $8.04, it will be shown as $8.05, and
if it is $8.08, it will be shown as $8.10
Thank you
Regards
Leonard Tan
Hello,
DIFF Condition is to be inserted in the Pricing Procedure.
Search the forum with "DIFF Condition" & date range as All & you will get details steps to do the needful.
http://forums.sdn.sap.com/search.jspa?threadID=&q=Diff+COndition&objID=f246&dateRange=all&numResults=15&rankBy=10001
Hope this helps.
Thanks,
Jignesh Mehta
Edited by: Jignesh Mehta on Jan 17, 2012 3:50 PM
Similar Messages
-
Blocking the orderdepending on the Bill amount
Hi All,
I need to block the order if the billing amount is greater than 100000.
in which user exit i should write the code and in which i can find the amount of the bill at header level.
Please help me out.
Regards
KumarHi Kumar,
Quick solution..try this by putting a soft beakpoint:
A) For influencing billing document you could use RV60AFZC and subroutine USEREXIT_FILL_VBRK_VBRP. This will give you VBRK/VBRP header/item values
B) For setting a header block on sales order you could use in program MV45AFZZ your own custom code within form mentioned below:
FORM userexit_save_document_prepare.
vbak-lifsk = 'ZS'. " Set your block at header here
ENDFORM.
Let me know if this is what you were looking for..
Thanks,
Anand -
FM for giving the total bill amount for a specific billing month in IS-U
Can anybody help me with a function module which will give sum for all the bill amounts shown in transaction code EA22 in IS-U.
I just want to know the total bill amount for given billing period but through a FM.
Thanx in advance.Hi Vinay, check out this as it may be of some help 4 u.
In the fM "BAPI_BILLINGDOC_CREATEMULTIPLE",
In the tables Parametr , u need to pass BILLINGDATAIN which contains the SD docu No (REF_DOC).
The following are the Required entries :
BILLING_DATA_IN-SALESORG
BILLING_DATA_IN-DISTR_CHAN
BILLING_DATA_IN-DIVISION
BILLING_DATA_IN-DOC_TYPE
BILLING_DATA_IN-ORDBILLTYP
BILLING_DATA_IN-SOLD_TO
BILLING_DATA_IN-ITEM_CATEG
BILLING_DATA_IN-REQ_QTY
BILLING_DATA_IN-SALES_UNIT
BILLING_DATA_IN-CURRENCY
If a material is billed for which a material master needs to be
determined (BILLING_DATA_IN-NO_MATMAST = ' '), you must make the
following entries :
BILLING_DATA_IN-PLANT
BILLING_DATA_IN-MATERIAL
If, on the other hand, a material is billed for which no material
master is to be determined (BILLING_DATA_IN_NO_MATMAST = 'X'), you
must make the following entries :
BILLING_DATA_IN-COUNTRY
BILLING_DATA_IN-MATERIAL
BILLING_DATA_IN-TAXCL_1MAT
pls reward if helpful.
cheers,
Hema. -
Tracking of Bill amount passed by MIGO and MIRO
How to get the batch details of the bill amount passed through MIGO with its corresponding bill amount passed through MIRO in case there is difference in the two.
Hi Hugo,
Perhaps you might consider creating a display variant in miro through transaction SHD0. This
way you can have the Column of interet displayed right beside the amount
field so the user will not get confused.
Check out the following note in relation to this:
315586 MIRO: Create/change display variant
Hope this helps,
Adam. -
Last month I was 1 day late paying my bill, so I tried to pay the full amount. But the website would only allow me to pay the current bill amount. Now, I show a past due amount. If I tried paying it and Verizon didn't allow me, how is it past due?
I'm confused - If I go online to pay my bill, and it's one day after the due date, the current bill and full amount due would be the same? If the current bill is not the "full amount due", then what is the extra amount that's snow showing past due?
Also, when I go in to pay my bill, I show the Current bill amount, total amount due (which are the same), and then a box where I can type in the amount I am paying, with the default amount being already filled in with the total amount.
Is this a pre-paid or a post-paid (contract) account? -
Hi,
Is it possible to round the TDS amount in AP invoice Screen ?
I can round the total invoice amount.
Regards,
Sanju M SHi Sanju......
Use the latest version of TDS 5.3. This functionality of rounding TDS is there at the time of transaction.
Regards,
Rahul -
Retreiving the last amount billed to a customer (dynamically in the Query)
Hi,
I want to retrieve the last amount billed to a customer.
For example :
r/3 data :
Customer____Billing date__Amount
1___________04/04/2006____5000
1___________05/05/2006____1200
2___________03/04/2006____400
The result i would like to get in the report :
Customer___Amount
1__________1200
2___________400
I tried many ways including Key figures agreg. Exception.
Do you have any suggestion ?
best regards,
ludo
Message was edited by: Ludovic Julen
Message was edited by: Ludovic JulenHi,
The date of the data loading has no impact on the selection of the last value. In december, you can load the historical data of 2005, 2004 and 2003. The data will be stamped on 2005, 2004 or 2003 (dates of reference from the documents).
So, in your case, the query would give you the first load as a result of the last value. But you are using 0CALDAY in your example. Of course, you would not be able to use 0CALMONTH in such scenario, because you do not bill only once a month.
Now, please notice that the last value is based as well on the execution of the query. Is your query analyzing all december? Imagine that your query is filtered from 01.12.2006 to 14.12.2006, then you get only the second load.
This is a double setting.
Regards
Laurent -
Need to view the customer whose bill amount is constant for three month
Suppose user will give the month and year (ex: march-2011) then result will show all the customer whose bill amount is same in March,Feb and Jan-2011 and the result will be shown in three lines.
For these I need to create one view and the corresponding query. Whose combined output should be----
Cust_id Base_month Bill_amount
1 Mar-2011 500
1 Feb-2011 500
1 Jan-2011 500
9 Mar-2011 800
9 Feb-2011 800
9 Jan-2011 800
Can anyone help me?912751 wrote:
Suppose user will give the month and year (ex: march-2011) then result will show all the customer whose bill amount is same in March,Feb and Jan-2011 and the result will be shown in three lines.
For these I need to create one view and the corresponding query. Whose combined output should be----
Cust_id Base_month Bill_amount
1 Mar-2011 500
1 Feb-2011 500
1 Jan-2011 500
9 Mar-2011 800
9 Feb-2011 800
9 Jan-2011 800
Can anyone help me?Sorry for my given link at SQL Developer Forum. There was mistake in the link. Here is the correct Link...PL/SQL
Hope this will help you -
The bill document printed from a contract is not displaying the amount at i
When we execute the print layout form a bill document from a contract is not displaying the amount at item level however the total amount of the document is correctly displayed in the button of the document.
Thank you and best regards.Hi Alberto
please check the field which has been mapped in the SAP Script and the Smart form.
it must be the header amount field. you can replace it with the VBAP_NEtWR or similar fields like kzw1 if you have mapped the sub totla sot get the amount at item levels
thanks
akasha -
What is the exact amount of the internet portion of my bill bundle
My bill is over $200 but I need to know the exact amount of my internet portion of that bundle.
Where are you seeing this is required? The ISP is the name of your internet service provider.
-
I was charged the wrong amount on 3 albums I downloaded. I received an email about special pricing, I downloaded the albums I wanted and was billed for the full amount. How do I get a refund?
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
Rounding off in billing doc for % based milestone billing
Hi,
I am working with milestone that is % based. I already have condition type DIFF in the pricing procedure. The rounding off is taking place in sales order. But, milestone value is not being rounded neither at sales order item level nor at billing level. For Example (a single item order):
Total value of the sales order item : 150.30
Sales order item value after rounding off: 150.00
Milestones :
1. 15% - 22.50
2. 60% - 90.00
3. 25% - 37.50
The same amount is going to billing and no rounding off takes place at the billing level or milestone level.
Can any tell me how this can be done so that only rounded off figure is accounting.
The condition type setting is standard. No changes made. (The pricing also has Req 13, calty 16 basty 4.). Also the copy control order to billing has Pricing type K.
Regards,
MuneshHi,
I think we have Rounding off tick in billing document back ground screen or on your condition type back ground screen please check . I dont have SAP to check.
Thanks,
T.Nishanth -
Rounding at the time of finance posting
Dear All ,
Our client requirement round the amount at the of FI posting .
Means they do not want rounding at the item level but at the time of updating customer debit entry and credit entry to revenue account .
Points will be definately rewarded for suitable answer
Thanks & rgdsHi,
I understand from your requirement, basically you like to roundoff the amount at the trasfering to Finance-but you didnt mention the transaction if its Billing then use the following exit
SDVFX008
This exit fire at the time of transfering the amount fromSD to Billing, in this time you can write the code and also add the Function Module for Rouding off.
Regards
Gooutham -
How to calculate the Bill Discount !
Hi,
I have a requirement where in I have to develop a report to display bank balance chart with the following details in the output.They are :
1. Posting Date
2. Bill Discount (BD)
3. Letter of Credit(LC)
4. Cheque Amount may be cheque issued.
5. Deposits.
Above are the information which i have to display based on Posting Date range , Company Code and Bank Key present in the selection-screen.
Below are my few observations:
1. To retrieve the Bill Discount, I am first fetching the data from BKPF table by checking the document types 'DZ' ,'KZ', Company code and Posting Date Range. Then using document number,company code present in these entries along with Posting key = 39 and special GL indicator = 'W' retrieving the data like DMBTR,WRBTR from BSEG.
2. Similarly for Letter of Credit amount retrieving the data in the same way as mentioned above except special GL indicator will be 'Y'.
Now please correct me if my approach is wrong. Request you all to throw some light as I am Technical Consultant and humbly looking forward to all your help.
Also, request to let me know the logic or process how one can calculate fourth point as well as Fifth point as mentioned above.
I am just looking for flow of data/process flow/standard transactions through which I can see these above mentioned things which can help me in building the logic. At least a general approach to this will be appreciated highly.
Regards,
Raghavendra Kulkarni.
Edited by: raghavendra kulkarni on Jul 8, 2010 2:33 PMHello,
how to measure the size.The View DBA_SEGMENTS gives the size of any Segments (Table, Index, ...).
So you may use for instance a query like that:
select segment_name, bytes "Size in Bytes"
from dba_segments
where owner = '<schema_name>'
and segment_name = '<segment_name>'
and segment_type = 'INDEX'Hope this help.
Best regards,
Jean-Valentin -
User Exits for transaction VF01 before saving the billing document
Can any one say is there any user exit which exits before saving the billing document since i want to check the net value of the billing with the net value of sales order so that it should not go beyond the total amount specified in sales order.
J_3RSINV
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
These are the Exits Available in the Package
Jus try finding which will suffice ur Requirement.
Regards,
Mithun
Maybe you are looking for
-
My new WD hard drive is no longer able to boot. How do I fix this?
I got a WD10EALX Cabiar Blue drive last week and copied my existing internal drive that had Tiger OSX on it. It booted fine until I copied an iphoto library from a friend's Mac and now this disk won't boot. I get the circle with the slash through it
-
Hi, I found some discrepency on the results shown by memory profiler of JDEV (9.0.2) and that of NetBeans (IDE 4.0). Also, results of JDEV profiler is in contradiction to what Sun Java says (as per my own interpretation!). Here is what I am trying to
-
IPod classic - sort order of podcasts
I have a new iPod Classic 160 GB. Love it so far, but it has one annoying thing. In iTunes, I have my podcasts sorted from oldest to newest. There are some podcasts, like news and training podcasts that need to be listened from oldest to newest or th
-
My iPhone had a recent feature that anticipated words when I was messaging. I has since disappeared. How can I get it back?
-
How to automatically update Java without notifications
I just want Java to automatically update in the background - like Windows updates do. Is such a simple thing possible? If so, how? I understand that techies think it important to be notified. However, I am not a techie, just a regular computer use