Rounding Values

Hi Gurus
Please assist.
We have a custom program that creates PO using sap standard BAPI BAPI_PO_CREATE. The problem we are experiencing is that we would like to pass our own PO Item Quantity but because rounding values are maintained in the material master data the master data value is created on the PO.
How do I override the rounding value from the material master with a different value.
Your assistance with be appreciated.

Hi,
could you post with example , so that it will be easy to give solution
Thanks ,
Ravi

Similar Messages

  • BADI for Changing Deployment Rounding Value

    Hello All,
          During my Deployment run I need to consider the rounding value from the /sapapo/marm table and not from the product master. So I need a badi or user exit to change the rounding value for deployment run. Do let me know how I can achieve this.
    Thanks,
    Siva.

    Dear Tiemin,
           Thanks for your reply. But I need a BADI which needs to work when there is no Fair Share situation. It will be great if you provide me which suits for it.
    Thanks,
    Siva.

  • How to use rounded values in BEx Formulas

    Hello,
    I have the following question. Is it possible to use rounded values up to a certain # of decimal points in BEx Formulas?
    I have the following problem.
    Consider this:
    keyfigure val 1 = 0.416666667
    keyfigure val 2 = 72
    val 3 (BEx Formula)  = val 2 / val 1 = 172.799999862
    However, what I need to do is this.
    val 1 & val 3 should rounded up to 2 decimal points. So, I really need the report to show this:
    val1 = 0.42
    val2 - 72
    val 3 = val 2 /val 1 = 171.43
    I changed the number of decimal places on val 1 and val3 to be 0.00. However, it appears that these rounded values are not taken into account in  the Formulas, as if the OLAP still uses the original values from the backend with 9 decimal points. So, no matter how many decimal points I use on the Display tab for a key figure, my val3 or result of my formula is always taking into account the 9 digit decimal values, not rounded values that I want. So in the example above, my val 3 comes to 172.80, which it should be 171.43 instead of you use the rounded values in the calculation.
    Please let me know if there is any workaround where I could force my BEx Formula to utilize the rounded values and not actual values from the backend DSO. Or any other solution.
    Thank you

    If you create a Formula in BEx Query Designer like the one below, it works:
    val3 = val2 / ( TRUNC ( ( val1 * 100 + 0.5 ) ) / 100 )
    The TRUNC function (among other things) actually ensures that your formula takes into account the rounded values that you want.

  • Rounding value for purchase order quantity

    Hi Guru ,
    i need help for logic LOT SIZE MRP.
    In particolar i need of use the parameters of rounding for create the planned order multiple of the value.
    Example for a requirement of 3800 pz whit a value rounding of 500 i  vould want that the system create a planned order of the 4000pz.
    I have  tried insert this value 500 in the field "Rounding value for purchase order quantity" in the view MRP1 but after run MRP the system create a planned order of the same quantity of the requirement.
    Thanks a lot for help
    Daniele
    PP TEAM

    Dear,
    OMI4, for lot size select Lot for lot order qty with rounding.
    Either you can use the Rounding Value or you can use a Rounding profile in MRP2 view to round of your order qty and rouding value in MRP1 view.
    Further you can check
    Check FM MD_ROUNDING_VALUE
    Regards,
    R.Brahmankar

  • Rounding Value in Excise in Purchasing and Invoice Verification

    Hi,
    We need to round the values in PO on BED, Ecess (2%) & SEcess (1%) but the value is not getting rounded.
    Similarly in Financial Invoice Verification (FB60), the values of Service Tax is also not being rounded.
    In Configuration
    IMG u2013 Log Gen u2013 Tax on Goods Movm u2013 India u2013 Basic Setting u2013 Company Code Settings u2026u2026u2026u2026u2026u2026.. Rounding Rules have been ticked for procurement & removal
    But the values are not getting rounded off in ME21N & FB60 and subsequent transactions
    Can anyone give some idea to resolve this?
    Thanks in advance

    Thanks Sanil
    It's working now. But we are facing an issue with rounding value in case of Vendor Return. When we are posting Vendor Return Excise Invoice through TCode J1IS then system is rounding the value whereas when we are posting Vendor Return Excise Invoice through TCode MIGO then system is not rounding the values.
    Can you provide any idea to resolve this?
    Thanks in advance

  • Rounding Value is not considered for MB lot size

    Hi
    I have a scenario where MB (Monthly Lot size) lot size is used with rounding value. Example as below:
    Lot size: MB
    Min Lot size: 15000
    Rounding Value: 20000
    DEMAND: 16000
    When MRP run, System is creating the 16000 as P Req instead of 20000 which is the rounding value.
    Pl let me know, if I need to apply OSS note / any other solution for this.
    Thanks,
    JK
    Edited by: Janakiram Katakam on May 17, 2010 4:57 AM

    Dear ,
    Are you using any Rouding Profile in MRP1 view ?
    What is the Setup in OMI4 for MB-Lot Size .Remove the tick mark in Last Lot Exat if it is marked .By specifing the rounding value, the system will determine during lot size calculation that lot size qty is a multiple of of an order unit(eg : pallet size if mtrl is delivered in entire pallets...).
    Please check what is the Lot Size Indicator or Lot size procedure assinged to it ?
    2.you can use rounding profiles...its used to define the setting of rounding up or rounding down the order proposal qty into deliverable quantities...rounding profile maintenance the t-code is OWD1. Here for static rounding profile
    Rounding profiles are defined under:
    spro-> purchasing->consumption based planning->planning->lot size calculation ->maintain rounding profiles...
    it consist of threshold value and rounding value...
    the threshold val is the value from which the system rounds the value of the next deliverable units upto...
    the rounding value is from which the systemshd round up to as soon as threshold value is exceeded...
    Otherwise ,  Check FM MD_ROUNDING_VALUE
    Regards
    JH
    Regards
    JH

  • Rounding value for direct procurement

    Hi,
    I an sourcing the same material from another plant within the same client. The materiale is some times purchased as a standard material using rounding value and going to stock. But, in some cases the material is procured as direct procurement. When purchasing for direct procurement will it then be possible not to use the rounding value but just order the exact quantity?
    thanks,
    Anders

    Hi Andres,
    I think, you do not need to take any action on this requirement.  SAP works the way you wanted, by standard.  For example, you have a setup with a vendor (may be via info record or material master itself may have rounding qty etc)...not a problem.  The parameters you use in material master will control for procurement process either triggered from planning (or production ) or manual purchases.  When you create a SO# and if it triggers a purchase requisition, it sends exact quantity required only, into the preqs.  By standard SAP config, the message about rounding rules is just warning.  I don't think you will be stuck with this message when you try to convert the 3rd party Preq to PO.  Even if there is a message, it must just warning. 
    Let me know with these inputs, if you test both types of PO#s, how it goes.
    Regards

  • Rounding value for PR Quantity

    Dear Expert,
    Can we have rounding value for order quantity in Purchase Requisition? So we do not need to calculate the PO quantity based on the rounding value we have determined in material master / get the error  message "Order quantity violates rounding rules while we creating the Purchase order.
    And What is rounding profile? can we use this to set the rounding value for PR quantity?
    Hope to see ur feedback soon.
    Thanks
    Pauline

    Hi Dick Hua,
    Thanks for your feedback.
    i understand what you are trying to explain to me , can we do some changes / customizing from your statement, so that the manually created PR can have effect on rounding value, same as when we run the MRP.
    Can you tell me What is rounding profile used for? can I used rounding profile to solve my customizing?
    Thanks
    Pauline

  • How to cancel rounding value check when convert pr to po use me59n or me59

    hello every one,
            I have a requisition that,customer want to cancel rounding value check when converting purchase requisition to purchase order use me59n or me59,but they want keep the function of check rounding value when create purchase requisition as mrp run.
            does anyone happen to meet samiler question?Is there any way to solve it?
            thanks
    Edited by: p y on Aug 3, 2010 5:14 AM
    Edited by: p y on Aug 3, 2010 10:07 AM
    Edited by: p y on Aug 3, 2010 10:56 AM
    Edited by: p y on Aug 3, 2010 10:57 AM

    what do you think based on what SAP should know whether it has to do rounding or not?
    Why should SAP not round if a rounding rule is entered?
    when a human is converting the PR to a PO, then a warning message is issued, if the user then enters  the old quantity again, SAP accepts it.
    A background program cannot do such decisions, it has to rely on given master data.

  • Rounding Values while creating purchase requisitions using ME51N

    Hi MM Experts,
    I have created some materials with a Rounding Value maintained in MRP1 View of the material master.
    Whenever I raise a purchase order, the order quantity rounds off to the value maintained in the material master which is the correct functionality.
    But when i try to create a purchase requisition using ME51N, the rounding functionality doesn't work.
    Example: Rounding value (in MRP1 view) of a material is 25.
    The order quantity entered is 4. But before saving the PURCHASE ORDER the order quantity will be changed to 25(which is the rounding value). This is the correct functionality but doesn't happen with the PURCHASE REQUISITION (ME51N)
    Can someone guide me on how to make the rounding value work for purchase requisitions when using ME51N?
    Thanks in advance.
    cheers,
    Randi

    Hi!
    i had the same problem with a company.
    i did not find any customizing possibilities.
    I solved it with BAdI ME_PROCESS_REQ_CUST
    Method PROCESS_ITEM.
    I hope this helps
    Flo

  • How to cancel rounding value check when convert pr to po use me59n

    dear all,
            I have a requisition that,customer want to cancel rounding value check when converts pruchase requisition to purchase order use
    t-code me59n,but they want keep the rounding value check when create purchase requisition when mrp running.i look up enhancement for this function,but didn't find any.so has any one can tell me a way to solve this question?
           thanks a lot!
    Edited by: p y on Aug 3, 2010 10:08 AM
    Edited by: p y on Aug 3, 2010 10:10 AM
    Edited by: p y on Aug 3, 2010 10:57 AM

    does anyone know it?

  • Rounding Value,Minimum Lot Size and Maximum Lot Siz parameters

    Hello Gurus,
           Please explain me the what is the use of the parameter Rounding Value
    ,Minimum Lot Size and Maximum Lot Size parameters in the product master and how does it in impact during the Heuristic Run?
    Thanks.

    Rounding value is the incremental quantities in which the order can be produced/procured. Eg. if orders are possible with quantities 40,60, 80, 100 etc..then rounding value is 20.
    Min lot size is the minimum quanity in which order can be produced eg. 40 in above example
    Max lot size is the maximum quanitity in which the order can be produced/procured. eg. 100 in our example
    Impact on Heuristic run: heuristics takes all the above parameter to plan supply order. eg. if requirement is 55, it will supply plan for 60. If requirement is 120, it will produce two orders - one for 100 and the other for 20. if the reuqirement is 10, the order size will be 40.
    Hope this helps.

  • Material Rounding Value in Manual Purchase Requisition

    Hi Gurus,
    Can I get complete explanation on Material Rounding Value which is maintained in Material Master MRP1 view?
    When Automatic PR is created this value is taken into account for example I set the Rounding value to 20, if the automatic PR need 15 then it will be rounded to 20, but if I create manual PR, I type in the qty 5 then it will still be five but when converted to Purchase Order then the qty in Purchase Order is set to 20.
    Can some one please give me some explanation?
    Thanks
    Rewards points for helpful answer

    Hi sir ,
    Im sending you a link hope this would help you out
    http://help.sap.com/saphelp_45b/helpdata/en/7d/c27259454011d182b40000e829fbfe/content.htm
    reward points if helpul
    regards
    pavan

  • Rounding value problem in planned order

    Hi,
           if we have demand for X material is 1.500 qty. & under this 2 material having usage probablity is 50-50% also single material having qty is 1 nos. But if i am taking run for X material having demand of 1.500 qty. then it will give rounding value as 1  qty not 0.75  qty for each material.
    my problem is about rounding value. we are using strategy 40 & Lot Size is EX & Procurement type is E.
    i also check in OMI4 for lot isze,pls reply me
    Best Regards,
    Dev

    Hi Dev,
    For rounding  value you need to check the below two fileds in Material Master  MRP 1 view :
    1. Rounding Profile
    2. Rounding Value
    If the rounding value is 1 then system will round off to 1 for any decimal requirement like 0.1,0.2,0.3...... etc.
    regards
    radhak mk

  • Rounding value and Minimum lot size

    Hi all,
    Finish material is X and Raw material is Y.
    Bom- For Preparing Xu2019s 1 Qty, 1 Qty of Y is required 
    In Material Master of Y - Rounding value and minimum lot size is 10,
    Project needs 5Qty of X.
    When MD51 for Project execute u2026 PR of Y must be of 10 as per rounding value and minimum lot size, but it is creating PR of 5 qty.
    Above scenario working properly if I take MRP run with MD02 for material X for 10qty, after MRP PR of Y will be created for 10qty.
    With Regards,
    Ashish

    Dear,
    By default, the lot size works as lot-for-lot quantity in the make-to-order and project scenario.
    Go to OMI4 select your Lot size and define Lot Size: SOP  1 or 2Lot-for-lot with rounding. Better create new Lot size as ZX with these setting.
    If you always want lots to be created for the multiple of the rounding value, you must specify a minimum a multiple of the rounding value.
    Example: minimum lot size: 10 and rounding 10.
    Please try and come back.
    Regards,
    R.Brahmankar

  • ROUNDING VALUE IN MRP1

    Dear Friends
    Can you able to guide me for updating ROUNDING VALUE in MRP1 view of Material master
    Ex. I have 1000 materials in material amster, and for all thease material at present ROUNDING VALUE is ZERO
    Now i want to update all the values
    IS THERE ANY FUNCTIONAL MODULE OR BAPI TO update this??
    Regards

    Hi,
    Please follow below steps to acheive your requirement.
    Step 1 : Excute T code MM17.
    Step 2 : Select Table MARC.
    Step 3 : Excute.
    Step 4 : Import your text file, using icon which is material field.
    Step 5 : Give plant.
    Step 6 : Excute.
    Step 7 : Select your field (BSTRF)
    Step 8 : Transfer(BSTRF) to selection criteria.
    Step 9 : SAVE.
    Please prepare your excel file like , Material (Matnr ) and rounding value (BSTRF).
    Please reward points if my information useful.
    Regards,
    Nagapandian.

Maybe you are looking for

  • Question on linkage of idoc with document number created in SAP R/3

    Hi all, I have a query related to IDOC. When inbound IDOC is posted into SAP R/3 it creates Material document number or billing document number is generated in SAP R/3. Question: <b>Do we have interface monitor in SAP R/3 Where I can see the linkage

  • Recruitment : Create planned activities automatically

    Hi all, I want to create activity  Confirmation of receipt after carry out action "Initial entry of basic data" automatically. I configured on the  path : (SPRO -> Personnel Management -> Recruitment ->Applicant Selection -> Change automatic creation

  • Business scenario where change pointers method for cross apps is used

    can any one explain the business scenario where change pointers method for cross apps is used.even explain whether it is used in an implementation project or a support project

  • IPod Broken?

    I need help in this because I seriously have no idea what to do anymore. After I updated the iPod with the 1.3 update, the battery completely shut down. Every time I had it on charge it displayed as fully charged, yet the second I took it off it shut

  • Reg. Date In Script

    Hi Every one, I have one issue in scipt that is im printing the date 29.07.2009, but the client is asking to print like this 29/07/2009.  How to do this ?. please send the Reply. With Regards, Narasimha Rao.N