Routing Table Linking.
I am currently working on a project whereby I am linking in MS Access the data in the "MTL_SYSTEM_ITEMS_B" Table, "BOM_OPERATIONAL_ROUTING" Table, "BOM_OPERATION_SEQUENCE" Table and "BOM_OPERATION_RESOURCES" Table. As for the link between the "MTL_SYSTEM_ITEMS_B" table and the "BOM_OPERATIONAL_ROUTING" table, there is a one to one relationship. Though for the link between "BOM_OPERATIONAL_ROUTING" (link from) and "BOM_OPERATION_SEQUENCE" (link to), this link is not so straight forward. The BOM Technical Manual shows that these tables are linked by way of the field "ROUTING_SEQUENCE_ID". What makes things complex is that there is a "COMMON_ROUTING_SEQUENCE_ID" field for parts that have similar routings. For parts that have similar routings, the valid routing is the "COMMON_ROUTING_SEQUENCE_ID". The question I have is what type of database structure should exist as there are two fields that are possible candiates for linking. When looking at the data in the "BOM_OPERATIONAL_ROUTING" (link from) table in Discoverer, the data in the "ROUTING_SEQUENCE_ID" field is unique, though the data in the "COMMON_ROUTING_SEQUENCE_ID" field is not unique. The field "ROUTING_SEQUENCE_ID" does not contain data in the "BOM_OPERATION_SEQUENCE" (link to) table where data exists in the "COMMON_ROUTING_SEQUENCE_ID" field for the part in "BOM_OPERATIONAL_ROUTING" (link from) table. In other words if you simply link the field "ROUTING_SEQUENCE_ID" that exists between "BOM_OPERATIONAL_ROUTING" and "BOM_OPERATION_SEQUENCE" you will not get operation sequence records for parts that have common routings.
It is confusing as the Oracle Technical Manual does not spell out this issue in the Diagram 9:Routings or I do not understand how to interpret the relationships.
Any help in defining the relationship between "BOM_OPERATIONAL_ROUTING" table and "BOM_OPERATION_RESOURCES" table would be greatly appreciated.
I am seeing that with the complexity of the problem, I have not been clear enough.
Basically I am trying to replicate the relationships that exist in the Oracle table structure within a MS Access environment. Basically what I am doing is taking data from Discoverer tables that were derived from the table relationships that exist in Oracle and downloading them into MS Access. Because of Sarbanes Oxley restrictions, I cannot originate reports in the Discoverer environment so I have to download the data and replicate the structure within MS Access. Secondly, the table links in Discoverer are not proper and there is no existing Discoverer report.
I determined a jerry-rigged solution earlier yesterday for MS Access though I am sure it is not the structure that exists in Oracle. I basically created a junction table that includes only one record for each "common_routing_sequence_id" thereby reducing the relationship between the "BOM_Operational_Routing" table and the junction table to a many to one. I then linked the "common_routing_sequence_id" in a one to many relationship out of the juction table to the "BOM_Operation_Sequence" table.
I cannot find how Oracle handles this table structure though I have reviewed the technical manual showing the relationship. It is not spelled out in the technical manual. All I see is a one to many link on "routing_sequence_id" coming from the "BOM_Operational_Routing" to "BOM_Operation_Sequence".
Similar Messages
-
Full routing table exchange in Link State Routing?
In link state routing protocols, full update that happen every 30 minutes, does the routers exchange the whole routing table with each other? Or exchange something else, not full routing table. If not the whole routing table, what they are exchanged?
The interval depends on the routing table. OSPF will send out a fresh copy of the LSA (link-state advertisement) every 30 minutes. ISIS will send it every 20 minutes. Only LSAs are sent, not the routing table.
Paresh -
Database tool for routing table history changes
Dear Community, I'm looking for a freeware tool to hold history changes in routing tables for small to medium network running BGP, OSPF and MPLS VPN routing tables via VRFs. This tool need a way to compare the database in order to know if these are the same during the time.
Is there a way to do this in Cisco Works?
Thanks in advances for your recommendations.Julius,
There are no industry recommended open source DB tools.
Normally it depends upon the developer preferences that how he/she wants to see the tool usability.
I can suggest you to go through the below link:
http://sourceforge.net/search/?type_of_search=soft&words=SQL+Tools
You can find many open source SQL tools, which you have to test and select one among them.
I can suggest you to use:
1) TOra
2) Easy SQL
3) SQuirrel
"Choose a Tool which is easy to use and efficient, Dont worry about Look n Feel"
Best of Luck -
Multiple routing tables and/or policy routing
Hey all,
I'm trying to configure a Mac Mini (10.8) for multiple routing tables and policy routing. This server runs Ostinato, a freeware traffic generator. My purpose is to generate traffic on multiple VLANs towards different gateways and different destinations. To that end, I have VLAN tagged the (only) Ethernet port and configured 5 VLANs on it. The first one has the default route (I manage this Mac over this VLAN). The other four have IP addresses in the test range I'm using.
The goal is to have traffic sourced from IP-address-X go out vlanX towards gateway-X. It's counterpart on the far end runs Linux and I have configured it in this way:
ip route add default via <gateway-X> dev ethX table X
ip rule add from <network-X> table X priority X
Researching on OpenBSD forums (since it's the base of MacOS X), provided this:
route -T X add 0.0.0.0/0 -iface <gateway-X>
echo pass in from <network-X> to 0.0.0.0/0 rtable X | pfctl -mf -
However, the Mountain Lion "route" command does not support the -T option, so that killed that idea. Another forum suggested that this would have worked on 10.4:
ipfw add X fwd <gateway-X> ip from <IP-address-X> to any
I tried this on 10.8 though the man page says it's deprecated, and (surprise, surprise) it did not work.
Any ideas to get this working appreciated!
Thanks,
AaronStill doesn't have it in 10.9.4.
irene:~ cschwartz$ sudo bash
bash-3.2# route -T add
route: illegal option -- T
usage: route [-dnqtv] command [[modifiers] args]
I'm guessing you want policy-based routing due to VLANs...? If you can get a USB-to-Ethernet adapter, then maybe you can work around this by using multiple physical links instead of VLAN tagging. But if you need source-based routing etc. then no. -
Vrf routes into global route table
Dear All
I am stuck with a design I am trying to come up with for our EDGE network and looking for ideas from the community.
It is similar to what is described here:
http://www.cisco.com/en/US/docs/solutions/Enterprise/Network_Virtualization/ServEdge.html#wp86450http://www.cisco.com/en/US/docs/solutions/Enterprise/Network_Virtualization/ServEdge.html#wp86904
In short we have a multi-context FWSM at 2 sites creating an EDGE network, each site operate independently. The sites are linked internally in a single routing domain using OSPF. Each of the outside networks are in seperate VRFs, single-tier model.
I need to find a way to:
1) link the 2 sites (currently is done with a GRE tunnel between the site vrfs, looking at replacing this with mp-bgp and l3vpn encapsulation)
2) redistribute routes from each of the vrf into the common global route table (running ospf)
1 is working nicely with mp-BGP peer between the sites and routes distributed between, however I am stuck on how to achieve 2.
The only way I can see is to change the global route table to a vrf, then use rt import/export. This is commonly described as shared services. When I did that I got stuck with how to do the BGP peering as the loopback I was using for the peering is inside the new vrf.
Basically I want dynamic routing from the global route table to learn routes from each of the sites vrf. Then if a particular site's vrf is unavailable, it can pick up the other site's route.
Am I missing something here? The document linked makes it sound incredibly easy yet I am struggling with how to implement it.
Any advice is much appreciatedHello philip,
It is really hard to help you, if you do not provide topology where you would like to implement these changes, so just some thoughts to your points:
2) redistribute routes from each of the vrf into the common global route table (running ospf)
You can use PE - CE design. VRFs are terminated on PE with all routes you need in respective VRFs. On PE, MP-BGP routes are redistributed into respective VRF's OSPF process . PE is connected with CE via separate physical interface for each VRF or you can use one physical interface with dedicated sub-interface for each VRF. PE is peering with CE using OSPF. All routes end up in CE global routing table.
Problems with this design ->
- for each VRF you have to create separate OSPF process on PE and CE, also OSPF process ID has to be unique on PE for each VRF. Also OSPF process ID has to match to establish OSPF neighborship between PE-CE, so on CE you will have to redistribute OSPF routes from each process to your main OSPF process.
other workarounds ->
1) instead OSPF you will use as peering protocol BGP between PE-CE, but you still have to redistribute BGP routes to OSPF on CE
2) you will use different PE to redistribute each VRF -> BGP routes will be redistributed from VRF into OSPF (same process ID as your main OSPF ID). Routes will be advertised via OSPF into CE global routing table.
You will use on PE per VRF to redistribute routes into OSPF with same process ID as your main process ID. Thanks to different PEs, you can have same OSPF process ID, all these PEs will peer with same CE via OSPF.
I hope I made my thoughts understandable, cause its quite hard to explain
When I did that I got stuck with how to do the BGP peering as the loopback I was using for the peering is inside the new vrf.
This should not be a problem. You can have same IP on all VRF and also global table, so peering can still be done. After BGP routes are exchanged you can leak prefixes from one vrf to another or into global table as you need.
Best Regards
Please rate all helpful posts and close solved questions -
I have a server with Intel 82576 Gigabit Dual Port Nics. I have configured them to use iSCSI boot the primary looks to 10.0.0.1/24 and the secondary looks to 10.0.1.1/24. The target is configured correctly. Everything boots as expected.
I have added the MPIO feature and configured MPIO for the iscsi initiator as per: http://blogs.technet.com/b/migreene/archive/2009/08/29/3277914.aspx.
My issue is that the iSCSI networks show up in the routing table like so:
I did not configure a default route in the Intel setup utility:
I tried to explicitly remove the 0.0.0.0 entry and leave blank, with no change. As you can see with the above routing table traffic attempts to travel over these routes:
C:\Users\Administrator>ping google.com
Pinging google.com [209.85.145.99] with 32 bytes of data:
Reply from 10.0.0.201: Destination host unreachable.
Reply from 10.0.1.201: Destination host unreachable.
Reply from 209.85.145.99: bytes=32 time=23ms TTL=51
Reply from 209.85.145.99: bytes=32 time=22ms TTL=51
Ping statistics for 209.85.145.99:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
A ping to the outside world first attempts on 10.0.0.x/24 network, then on 10.0.1.x/24 network and then finally on the network the traffic should go over. I don't want my iSCSI traffic to ever show up with a default route. How do I get rid of it?
route delete 0.0.0.0 mask 0.0.0.0 "on-link" results in: The route deletion failed: The parameter is incorrect.
route delete 0.0.0.0 mask 0.0.0.0 on-link results in: The route deletion failed: The parameter is incorrect.
route delete 0.0.0.0 deletes all default routes, then I have to add back in the "valid default route" of 192.168.100.6.
I would like to not have to do a route delete though.So I've sort of given up on fixing the gateway assignment in the route for iSCSI boot. I configured a DHCP server to give out the information required by iSCSI boot and configured the network cards to use DHCP for their configuration. I insured
that my DHCP server gave out no default gateway entry. However, I still got the undesired routes in the routing table. This makes me assume that there isn't a "fix" for it, only the workaround.
Here is the script I run on each iSCSI Boot initiator (you would obviously change the ip number to suit your environment):
@Echo off
Rem fixes iscsi route problem as shown below:
Rem IPv4 Route Table
REM ===========================================================================
REM Active Routes:
REM Network Destination Netmask Gateway Interface Metric
REM 0.0.0.0 0.0.0.0 On-link 10.0.0.200 10255
REM 0.0.0.0 0.0.0.0 On-link 10.0.1.200 266
REM 0.0.0.0 0.0.0.0 192.168.100.6 192.168.100.98 266
REM The top 2 lines are on the iscsi interface and traffic tries to go out it
REM We need to delete the routes, so we'll just delete all gateway routes and
REM add back in the one we care about.
route delete 0.0.0.0 >c:\iscsibootroutefix.log
route -p add 0.0.0.0 mask 0.0.0.0 192.168.100.6 >>c:\iscsibootroutefix.log
After running it I get:
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.100.6 192.168.100.98 11
10.0.0.0 255.255.255.0 On-link 10.0.0.200 10255
10.0.0.1 255.255.255.255 On-link 10.0.0.200 10255
10.0.0.200 255.255.255.255 On-link 10.0.0.200 10255
Then I added a task in “task scheduler” of "administrative tools" that ran as the user “system” “when the computer starts” that runs this script. -
IPV6 DHCP stateful doesn't insert local subnet in route table
I am setting up IPV6 on a LAN using satic IPs for Win2008 servers and DHCP stateful mode for Win7 clients. All static assigned servers can ping each other and if I setup a static on the Win7 clients they can also ping the servers. However when I assign DHCP stateful mode IP to the clients they lose the ability to ping the servers. I think that was is going on is that when the Win7 machines get IP via DHCP they do not get a route in the routing table for the local subnet. I have included IP info for static and DHCP clients in attachments.
I figure if I could add the fd:0:0:1::/64 subnet to the DHCP client it would work but I haven't been able to find the correct syntax to add an "on-link" router. Furthermore, this would kind of defeat the purpose of DHCP if I had to manually add routes to clients.
I have a UC520 that is the default gateway on the LAN and seems to support IPV6. Maybe this guy can help me out?
Thanks in advance.Alain,
I disagree about the /128. If you look at the static host it also has a /128 route pointing to itself. Also the IPV4 also shows /32 routes pointing to the local IP. The static host has one additional route not found on the DHCP client which is the /64 route to the local subnet pointing to "on-link". It is not clear how to add an "on-link" route using netsh but my point is that DHCP should provide all info and relying on manually adding routes is not the optimal solution.
The UC520 does not have any IPV6 on it. I only mentioned it because usually I use Windows for DHCP but in this case Windows is giving me this weird behaviour. I would rather get Windows DHCP to solve the problem but if it can't I would use the UC520 as a backup option.
Thanks for your input.
Rgds,
Diego -
GTS table linking the commodity code/tariff num to the declaration
Does anyone know the GTS table linking the commodity code / tariff number field (ccnst or ccncu) to the customs declaration item. I have search through the tables with entries of doman ccngn looking for a GUID reference but cannot find a link to CUIT.
We want to write out the text description in an IDOC IWTX but cannot find the link.
Thanks
ChrisYes, it helped us understand the EDI process better. However, we went a different route. Somehow the module to write out IWTX in the transit document started working.
So we decided to populate the text field. When we call the programs to create a transit declaration from a customs declaration we perform the following steps.
We are using a hardcode number scheme "CAPNL"
1. We read the reference customs document number from the call stack.
2. We used the customs document to get the CUHD
3. We loop through all the items on CUIT getting the product (PR)
4. Then we go to PRCTS with PR plus hardcoded number scheme
5. Then finaly we go to CTSNUM to get the commodity code
Chris -
I have a Linksys RT31P2 wired VoIP router that connects to my cable modem directly. Since there are more than 3 computers that link up to the internet in my house I have connected a Netgear FS105 5 port switch which all of the computers on my network connect to. I have had this setup for about 4 years now and it has been working fine until recently. I noticed that my connection was slowing down and wierd things were happening like links popping back to the page the link was on instead of the link itself and super long periods between page refreshes. So out of the blue I log into the router admin space and have a look around, nothing unusual. I open the routing table and I was surprised to see all of these strange Ip's, complete with their own subnet masks and default gateways. Also, all of them had a hop count of 165. The ip addresses resolved to several different ISP's in the sout eastern part of the country. Turning the router off and then back on clears all of these out but within a few days they are back. I have checked all of the computers in the network but have found nothing out of the ordinary. What is going on here? I didn't think that an attacker could come through the router firewall on a wired router but if hackers can get into top government networks, I guess they could get through a simple router. The following link is to a pic of the routing table with all of the strange entries. Anybody ever experience this and if so, what was done to prevent it from happening? Thanks.
Message Edited by LH1966 on 07-29-2008 09:07 PMI'm not sure I follow exactly. Are you saying a firewall between the router and modem? Doesn't the router already have one in place and is there such a thing as a firewall box that goes between devices like that? Somebody told me that this might have been due to p2p sites like Limewire or Bearshare, neither of which my wife nor myself use. My daughter has used Limeware but not much from what she says. I don't know but I really would like to fix this for good.
-
Netstat Routing Tables - Strange Destinations and gateways
I went on the Network Utility and ran netstat with the Display Routing Tables option. I got a 3 strange names on the Internet6 section. NO idea what Internet6 is first of all. BUt Destination names like Chicken-Wang.local, Brandon-PC.local and Troll-Toll.local dont seem normal to me.
What the heck are these? (Netstat results below):
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 172.17.104.129 UGSc 148 88 en0
127 localhost UCS 0 0 lo0
localhost localhost UH 1 29 lo0
169.254 link#4 UCS 1 0 en0
asif-khans-macbook 0:1e:c2:ab:48:72 UHLW 0 0 en0 1095
172.16.95/24 link#7 UC 1 0 vmnet8
172.16.95.255 ff:ff:ff:ff:ff:ff UHLWb 0 9 vmnet8
172.16.201/24 link#8 UC 1 0 vmnet1
172.16.201.255 ff:ff:ff:ff:ff:ff UHLWb 0 9 vmnet1
172.17.104.128/26 link#4 UCS 8 0 en0
172.17.104.129 0:30:48:5b:44:51 UHLW 170 1423 en0 1174
172.17.104.139 localhost UHS 0 0 lo0
172.17.104.160 0:18:39:c3:87:37 UHLW 0 0 en0 161
172.17.104.162 0:1e:c2:ab:48:72 UHLW 0 0 en0 1097
172.17.104.167 0:13:a9:1:93:99 UHLW 0 640 en0 1167
172.17.104.177 0:1f:f3:7:4e:30 UHLW 0 0 en0
172.17.104.179 0:15:c5:6b:c6:fe UHLW 0 0 en0 935
172.17.104.189 0:11:24:de:61:34 UHLW 0 5 en0 1177
172.17.104.191 ff:ff:ff:ff:ff:ff UHLWb 0 12 en0
Internet6:
Destination Gateway Flags Netif Expire
default fe80::9ba:d2e0:919 UGc en0
localhost link#1 UHL lo0
fd9e:e709:a8c0:db5 link#1 UHL lo0
fe80::%lo0 localhost Uc lo0
localhost link#1 UHL lo0
fe80::%en0 link#4 UC en0
Troll-Toll.local 0:17:f2:e2:58:94 UHLW en0
Macintosh-85.local 0:1b:63:1c:57:e0 UHLW en0
Macintosh-9.local 0:1b:63:95:d2:64 UHL lo0
Chicken-Wang.local 0:1f:f3:f4:7b:b4 UHLW en0
fe80::9ba:d2e0:919 0:1b:24:3f:f5:fe UHLW en0
Brandon-PC.local 0:22:15:8a:5a:89 UHLW en0
ff01:: localhost U lo0
ff02:: localhost UC lo0
ff02:: link#4 UC en0
Any ideas? Is my comp being hacked?
Help.
Asifinstall little snitch from obdev it will alert you to any unauthorised outgoing connections on your mac. Also is your firewall enabled? Are you behind a router? Do you have WPA encryption on your wireless network?
-
HOST ROUTING TABLE IS EMPTY please HELP
HELLO THERE PLEASE HELP ME , MY HOST ROUTING TABLE IS EMPTY
WHAT DO I DO NOW?Hi and Welcome to the Community!!
With a strong carrier network signal (not WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support...it is, after all, your carrier network that must populate these items to your BB.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi All,
Do you know if it is possible to tweak the time it takes to refresh the routing table when a route changes? Is there a reg key for this? I think by default it seems to be 10 mins or so before it works out the new route.
Cheers,
Simon.I am aware that Windows has a Dead Gateway Detection in TCP/IP: http://support.microsoft.com/kb/128978
This makes Windows identify if a Gateway is still functional.
Otherwise, manual configuration changes on TCP/IP make immediate updates on your routing table to make changes.
Not sure what are the other scenarios that are interesting you but I am not a way about a setting to tweak automatic refreshes or checks.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
"Cloned" en0 (hardwired Ethernet) in MacBook Pro Routing table -- how to remedy ?
I have noticed a "cloned" en0 (hardwired Ethernet) in my MacBook Pro's routing-table under Mavericks .
Instead of listing the IPv4-address, in the Terminal's "netstat -nr" command, the cloned-en0 lists "<Link#4>" .
I'm in the U.S., but currently the link translates to a U.K. IP-address .
What is going-on ?My "netstat -nr" readout -- the MAC-address has been edited :
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 172.16.0.254 UGSc 39 0 en0
127 127.0.0.1 UCS 0 0 lo0
127.0.0.1 127.0.0.1 UH 4 112977 lo0
169.254 link#4 UCS 0 0 en0
172.16 link#4 UCS 1 0 en0
172.16.0.254 xx:xx:xx:xx:xx:xx UHLWIir 40 554 en0 1130
172.16.1.10 127.0.0.1 UHS 0 0 lo0
Internet6:
Destination Gateway Flags Netif Expire
::/64 link#4 UC en0
::1 ::1 UHL lo0
2404:6800:4001:802::101f link#4 UHW3I en0 372
2600:807:320:202:8800::c77 link#4 UHW3I en0 341
2600:807:320:202:8a00::eed link#4 UHW3I en0 357
2600:807:320:202:8f00::236 link#4 UHW3I en0 358
2600:807:320:202:9800::c77 link#4 UHW3I en0 341
2600:807:320:202:9d00::236 link#4 UHW3I en0 358
2600:807:320:202:9d00::eed link#4 UHW3I en0 357
2600:1400:a::1743:fa8b link#4 UHW3I en0 365
2607:f8b0:4004:801::1017 link#4 UHW3I en0 381
2607:f8b0:4004:802::1000 link#4 UHW3I en0 351
2607:f8b0:4004:802::1004 link#4 UHW3I en0 352
2607:f8b0:4004:802::1005 link#4 UHW3I en0 363
2607:f8b0:4004:802::100b link#4 UHW3I en0 361
2607:f8b0:4004:802::1018 link#4 UHW3I en0 362
2607:f8b0:4004:803::1003 link#4 UHW3I en0 354
2607:f8b0:4004:803::100a link#4 UHW3I en0 364
2607:f8b0:4004:808::1000 link#4 UHW3I en0 359
2607:f8b0:4004:808::101e link#4 UHW3I en0 352
2607:f8b0:4004:809::1000 link#4 UHW3I en0 359
2607:f8b0:4004:809::1005 link#4 UHW3I en0 368
2607:f8b0:4004:809::1006 link#4 UHW3I en0 367
2607:f8b0:4004:809::1008 link#4 UHW3I en0 357
2607:f8b0:4004:809::1018 link#4 UHW3I en0 367
2607:f8b0:4004:809::1019 link#4 UHW3I en0 359
2607:f8b0:4009:801::1011 link#4 UHW3I en0 360
2607:f8b0:400d:c03::54 link#4 UHW3I en0 364
2607:f8b0:400d:c03::5f link#4 UHW3I en0 360
2620:101:8008:5::2:1 link#4 UHW3I en0 351
2a03:2880:f003:b01:face:b00c::1 link#4 UHW3I en0 363
fe80::%lo0/64 fe80::1%lo0 UcI lo0
fe80::1%lo0 link#1 UHLI lo0
fe80::%en0/64 link#4 UCI en0
fe80::21b:63ff:fea5:b71f%en0 0:1b:63:a5:b7:1f UHLI lo0
ff01::%lo0/32 ::1 UmCI lo0
ff01::%en0/32 link#4 UmCI en0
ff02::%lo0/32 ::1 UmCI lo0
ff02::%en0/32 link#4 UmCI en0 -
Table Link : Prod Order & Operations attached to the Order
Hello,
I need to extract Following Data:
Input: Prod Order Numbers
Output. Operations & Control key attached to the production Order.
Request to give the Table link to get the infornation.
Thanks & Regards
NitinHi,
Production Order No-AUFNR from AFKO table
Operations from AFVC table
Link between AFKO and AFVC is AUFPL(Routing no. of operations)
-Thaila Shree -
Activating failover config drops routing table
I'm attempting to configure two ASA 5520 for active/standby failover.
When I enter the “failover” command to enable the config on the primary ASA, the entire routing table disappears.
There is no routing process running, only static routes are configured.
Is this an expected behavior of the failover process and if so, how long should I wait for the routes to come back?
Is there a document somewhere explaining this behavior?
I’ve searched all day but couldn’t find anything that came close to explain this.
If this is not normal, what could be causing this to happen?
ThanksOriginally, both primary and secondary were configured for failover.
At this point I'm only trying to understand why the rounting table is cleared so the secondary is turned off.
Is it an expected result to have your routing cleared when you enable failover?
I've waited only ~30 seconds for the routes to come back. Maybe I'm not waiting long enough, but I haven't seen in all the documents I've read that lost of traffic should be expected when Failover is enabled.
hfn-asa5520-01# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 62.117.51.1 to network 0.0.0.0
S 172.26.0.0 255.255.0.0 [1/0] via 172.26.1.252, inside
S 172.26.30.30 255.255.255.255 [1/0] via 62.117.51.1, outside
C 172.26.1.0 255.255.255.0 is directly connected, inside
S 172.26.30.31 255.255.255.255 [1/0] via 62.117.51.1, outside
C 62.117.51.0 255.255.255.0 is directly connected, outside
C 10.1.1.0 255.255.255.0 is directly connected, dmz
S 10.21.21.0 255.255.255.0 [1/0] via 172.26.1.250, inside
C 10.255.255.0 255.255.255.252 is directly connected, Failover
C 192.168.168.0 255.255.255.0 is directly connected, Flora
S* 0.0.0.0 0.0.0.0 [1/0] via 62.117.51.1, outside
hfn-asa5520-01# sh failover
Failover Off
Failover unit Primary
Failover LAN Interface: Failover Management0/0 (Failed - No Switchover)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 3 of 160 maximum
hfn-asa5520-01# sh failover
Failover Off
Failover unit Primary
Failover LAN Interface: Failover Management0/0 (Failed - No Switchover)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 3 of 160 maximum
hfn-asa5520-01# conf t
hfn-asa5520-01(config)# failover
hfn-asa5520-01(config)# sh failover
Failover On
Failover unit Primary
Failover LAN Interface: Failover Management0/0 (Failed - No Switchover)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 3 of 160 maximum
Version: Ours 8.4(3), Mate Unknown
Last Failover at: 12:23:12 PDT May 21 2012
This host: Primary - Negotiation
Active time: 116 (sec)
slot 0: ASA5520 hw/sw rev (2.0/8.4(3)) status (Up Sys)
Interface outside (62.117.51.100): No Link (Waiting)
Interface inside (172.26.1.251): No Link (Waiting)
Interface dmz (10.1.1.1): No Link (Waiting)
Interface Flora (192.168.168.1): No Link (Not-Monitored)
slot 1: empty
Other host: Secondary - Not Detected
Active time: 0 (sec)
slot 0: empty
Interface outside (62.117.51.99): Unknown (Waiting)
Interface inside (172.26.1.249): Unknown (Waiting)
Interface dmz (10.1.1.2): Unknown (Waiting)
Interface Flora (192.168.168.2): Unknown (Not-Monitored)
slot 1: empty
Stateful Failover Logical Update Statistics
Link : Failover Management0/0 (Failed)
Stateful Obj xmit xerr rcv rerr
General 0 0 0 0
sys cmd 0 0 0 0
up time 0 0 0 0
RPC services 0 0 0 0
TCP conn 0 0 0 0
UDP conn 0 0 0 0
ARP tbl 0 0 0 0
Xlate_Timeout 0 0 0 0
IPv6 ND tbl 0 0 0 0
VPN IKEv1 SA 0 0 0 0
VPN IKEv1 P2 0 0 0 0
VPN IKEv2 SA 0 0 0 0
VPN IKEv2 P2 0 0 0 0
VPN CTCP upd 0 0 0 0
VPN SDI upd 0 0 0 0
VPN DHCP upd 0 0 0 0
SIP Session 0 0 0 0
Route Session 0 0 0 0
User-Identity 0 0 0 0
Logical Update Queue Information
Cur Max Total
Recv Q: 0 0 0
Xmit Q: 0 0 0
hfn-asa5520-01(config)# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
C 10.255.255.0 255.255.255.252 is directly connected, Failover
hfn-asa5520-01(config)# no failover
Maybe you are looking for
-
How to force Office 2013 CTR update regularly
We are using around 60 PKC licenses of Office 2013 which came in CTR format (we don't have any Office 365 subscription, these licenses came with the new computers). CTR can't be managed via WSUS and it usually updates itself once or two per month (id
-
ALV Logo is not down loading to excel.
Hi All, when we are downloading the ALV output to excel logo is not appearing.. please tell me how to down load logo to excel file, Thanks in advance..
-
What is the wrong about converting the .class of api of jc to .cap files?
hi everyone l tried to convert the .class filses of api to .cap files,there are some wrongs please help me! ___the .opt file:___ -out JCA CAP EXP -exportpath D:\jCDK2_2_1\api_export_files -classdir D:\workspace\framework framework 0x0a:0x0:0x0:0x0:0x
-
Status of Rejected Shopping Carts
Hi, We are in SRM 7.0 with application controlled work flow. The issue we are facing is for example in a cart with 3 levels of approvals with the first and second level approvers approves the cart and the third level approver rejects the cart. The ex
-
Why is my automatic download for season passes not working?
I'vr been using iTunes forever, but all of a sudden my season passes are not automatically downloading when I click 'check available downloads' and instead I have to go to each show and click download next to the episode. Whats up with that?