Routing the expression pedal to the wah in the Pedalboard

How in heaven's name do you control the wah pedal in the pedalboard with an expression pedal (CC11) or anything else?
Please help, anyone!!

I Keenboards,
I think I understand your question. As any parameter in MS you wish to control with hardware you need to assign it. Just go to Layout windows, add a pedal to the screen and on the left side choose learn and move your pedal (hardware) now if everything´s good you should have controller by the expression pedal. On the edit windows you can select the pedal on the screen and assign what you want that to do (wah wah).
hope it helps you

Similar Messages

  • Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

    Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

    I am having the same problems. My guess is that a lot of people are having the same problems and just living with it. Those of us who know where to go on the Internet come here to find a fix.
    It seems Verizon has some explaining to do. Maybe they should try Beta testing new software a little better. I would rather have to wait longer for something that works. I am sure that some manager or director said this is close enough, deploy it and we will see what happens. Well, you are seeing the problems. Time to fix your mistake.
    All of us are telling our friends about the problems. The longer this goes on, the more people we will tell about it.
    Wouldn't you rather us be telling our friends that their is an error in the new interface and that you are working hard to fix it?
    If you want to be up front about this, then just tell us. We are adults and can handle it. If you made a mistake, own up to it and give us some credit for doing your Beta testing in the field.
    Customer Service is all about telling the truth and if you made a mistake, admit it and lets move on with a fix. I do not want to be told again that I should be able to unplug it, power cycle it, try the on-board diagnostics, etc., etc.......
    I am going to be repsonding on a daily basis to keep this topic at the top of the list.
    Time to come clean. You will feel better Verizon.
    Let's talk tomorrow.

  • Expression Pedal to Wah Pedal in Logic Pro X

    This should be simple as control-click the pedal and assign a midi controller such as cc11 but it isn't.
    How in heaven's name do you control the wah-wah foot pedal with your MIDI foot pedal?
    Somebody, please...I been trying to figure this out for days!

    In LPX it is almost that easy.....
    Note: Make sure you have turned on ALL the advanced features in LPX's Prefs/Advanced before proceeding
    1) Select the track you wish to automate and make sure the plugin (or in your case, I assume the Pedalboard interface) is visible on the screen
    2) Press Command + L to open the Control Assignment window.
    3) If the Learn button in the bottom righthand corner of the Control Assignment Window is not Blue.. click on it once to turn it on (Blue in color)
    4) Click on the wah pedal graphic in the pedalboard window
    5) Move your Expression Pedal all the way up and all the way down. You should see the Wah pedal graphic move along with your movements of the expression pedal.
    6) Click the Blue Learn button to complete the process.
    7) Done.
    Additional info: Instead of... or in addition to...your expression pedal  you could also assign any other slider or knob on your midi controller for example to any other knob/slider or parameter in the pedal board or any other plugin or the LPX mixer functions such as pan or effect send level... for that matter... you currently have active too... by repeating the above process from Step #2
    Now read up on automation in the manual as to how to best record such movements and be able to easily edit them if needed.
    http://help.apple.com/logicpro/mac/10/#lgcpb1a6ab26
    ...and also type Automation in the search box in the online guide for more info...

  • Unable to route the data from an AQ in AQ11g to an AQ in AQ10g via router

    Hi,
    I have configured a router to route the data from an AQ in AQ11g DB to an AQ in AQ10g DB with IP Message Type.
    Data of JMS OBJ Message type is getting routed between the queues of same DB.
    But its giving error while trying to route the IP Message type data or JMS OBJ Message type data from an AQ in AQ11g DB to an AQ in AQ10g.
    aqtrace logs have been configured and I could not see any exception logs in that.
    Please see the AQ log below:
    The router encountered errors in processing job: <router job name>: oracle.j2ee.jmsrouter.RouterException: The router encountered errors in processing job: <router job name>
    I have done the following:
    1) Created a new instance and have configured the router
    2) Deployed the Standalone Resource Adpater for 10g and 11g
    3) Source and Target connection factories configured in the router is the same
    Please let me know the following:
    1) Is it possible to route an IP Message Type data from AQ11g to AQ10g
    2) Is it possible to route an JMS OBJ Message Type data from AQ11g to AQ10g
    Thanks and Regards,
    Lydia

    HI All
    Thanks for the prompt response. I got solution for my question. Please check below thread. For quick reponse i posted my question in one more category. Thanks to all of you.
    How to read internal table w.r.t. fieldnames stored in other table

  • How do I make my wireless router the "preferred" one?

    How do I make my wireless router the "preferred network"?  I have to manually re-select it each time I boot up or when it comes out of standby.  This has only started to occur now that I have a new wireless router.  I want it to automatcially select my router.

    Have you restarted your computer?  Repaired permissions and restarted your computer? 
    Which os are you using? 

  • How to route the reponse to the request.

    I have two topics, the first topic (Topic-1) will send the message and the message gets processed and the reponse is routed via the second topic (Topic-2).
              I would like to know, is there any automated way to route the reponose to the request?
              I have tried the following solutions and I didn't get it working...
              1. Get the MessageID from Topic-1 and send it as a JMSCorrelationID in (Topic-2).
              2. Have the receive-selector as 'JMSCorrelationID = "{_ConvID}"' in Topic2, and the local vairable _ConvID has the Conversation id stored, and the converstation is passed to Topic1 and routed via JMSCorrelationID in Topic2.
              Any help on resolving this issue is greatly appreicated.

    You can use Standard context object FILENAME.
    in receiver determination Put a condition based on standard context object FileNAME
    In the receiver determination, in the condition channel, use the Technical context object 'FileName' for file adapter.
    Follow the below path:
    Goto Receiver Detrmination --> Condition --> Left Operand f1 Help --> select first option 'Context Object' --> 1 List will be popped up --> Select FileName for File adapter from that list
    It will route the file based on filename.
    You can use CP for contains pattern (u2248) in condition
    FileNAME u2248  ABCFI*

  • How to route the information to approver with out involving sap workflows.

    Hi Developers,
    i have a doubt regarding how the requester filled form information will be send to approver with out involving SAP workflows in the portal.
    Normally i know the procedure where users fills the form with the approver details, the filled information is routed to approver UWL by trigerring a function module thru webdynpro.
    But i need to know is there any procedure to route the information without involving any backends.
    Thanks in Advance.

    Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
    and it is a good idea to install STB on your machines.
    If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
    I believe that on this platform, sneep gets the serial from the output of prtconf.
    There is a minor correction to be made :
    After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
    man -M /opt/SUNWsneep/man sneep
    with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
    that you will find on the physical serial tag.
    The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

  • How to route the Idoc to Two Different Locations based on the Plant Values

    Hi All,
    We will generate single Idoc, in that we will have 2 E1MARCM segments, one will have UK plant and another will have US plant.
    Now in XI, receiver determination i need to route the idoc to corresponding folders.
    How can we do this, because in x-path, we can check always for the first segment only, second segment will not come into picture.
    Please suggest me

    Hi,
    we can check the multiline  present in receiver determination  and specify the condition for both US an UK  receiver systems.
    Or   if you are sure that only  two (UK and US) will come , then check the condition for  Say  UK and  check the defualt reciver system in case of failure ,if its US it will go to the default system.
    You can also  try out the interface determination condition, please check if below links can help.
    How to write Conditions in Interface Determination for 2 IDOCs
    Single File to multiple IDoc
    Reciever idoc adapter Determination error
    Regards,
    Srini

  • How to route the ctr0 in DAQ MX for PXI 6229?

    Hello,
    The counter ctr0 of the PXI 6229 is internally wired to PFI12.
    How could i change the terminal on which this counter is wired? What is the function in LabWindows CVI 7.1 (NI_DAQ MX 7.3) should be used? Is there any example of this? (in all the CVI example the fact that we have to connect the counter to a terminal is just mentioned)
    Thanks for your help!
    guyom

    You can change the output terminal on M Series devices using the following function:
    int32 __CFUNC DAQmxSetCOPulseTerm(TaskHandle taskHandle, const char channel[], const char *data);
    On M Series devices you can route the output of a counter to any PFI line.
    I hope this helps!
    gus....

  • I recently bought a wireless router the wrt600n. I pluged...

    I recently bought a wireless router the wrt600n. I pluged the external HD ubs cable to the storage link on the router but it would not read the HD. I tried using the easylink advisor to add device but then when searching for the External HD its is not found. But when i go into the router setup manually under storage it detects the HD and i have it on share mode. The router is setup on my pc. When i got into my computer it does not detect the HD but on my macbook it detects the HD in share when i access the HD my connection cut right away. Why is that? Can someone help me. thanks

    From a previous post:
    Clear the Cookies for the Specific Site or Page you are having the problem connecting to - or if no sites will load, Clear All Cookies: http://support.mozilla.com/en-US/kb/Deleting%20cookies?s=clear+cookies&r=1&as=s

  • Can CVP Check availability of free channel in PRI and route the call?

    We have UCCE setup with ICM 7.x CVP 7.x & CUCM 6.x. There is a requirement from operations team , an inbound call queued to a skillgroup for more than 30 second should be transferred to an external number through T1 PRI.And if no free channel is available on PRI call has to be queued back to skillGroup. We are able to achieve this using IP IVR using Custom call Transfer node . Iam not sure how can we achieve the same using CVP. Is this achievable through CVP /ICM scripting ? If yes how?

    Hi,
    It is possible in CVP to route the call back to an external number. For this you would need to configure a label (Probably the number to which you want to send). If the call is in queue for more than 30 seconds you can send back the label configured to CVP and from CVP you can point a static route to the Egress gateway through which the call can go to the T1 PRI
    Regards,
    Dass
    Please rate useful posts

  • Route the request from Proxy Service in OSB to external BusinessService URL

    Hi,
    How to route the request from Proxy service to the Business Service(Which is not registered in the OSB) using End point URL.Dynamically look up the URL and route the req from Proxy to Business service.
    thanks in Advance
    Edited by: user10680427 on Jul 14, 2009 2:57 AM
    Edited by: user10680427 on Jul 14, 2009 3:34 AM

    Hi..
    Just set in within a routing options in a route node, either dynamic routing or just setting the uri, depends on your specific case..

  • Is it possible to route the log generated frm a FNDLOAD cmd to usr def file

    Hi,
    Is it possible to route the log generated from a FNDLOAD command to user defined file??
    Thanks in advance,
    Kiran

    Kiran,
    I think it is not possible, the log file will be generated in the directory where you run FNDLOAD.
    Regards,
    Hussein

  • Routing the 6220 frequency generator.

    Hi Everyone,
    I'd like to route the 6220 independent frequency generator to another PFI terminal.  The documentation states "You can route Frequency Output to any PFI <0..15> terminal.".  How is this accomplished in Labview?  I can't figure out the code or property node to "route" the signal to another PFI.  Or is it a matter of using the Frequency Output as the source for another task of some sort?
    Thanks.
    CraiggerB

    Craig-
    The channel property node "output terminal" is the correct way to change the output of the freqout counter (or one of the normal counters for that matter).  That way you don't have to worry about cleaning up the signal routing when you are finished.

  • Routing the SAP RFC

    Dear Folks,
    While doing STMS configuration, the SAP Server automatically configure the RFC for the server which are included in the Transport Route.
    Same as while adding the satellite system to SOLMAN , the SOLMAN Server automatically added the RFC as like above.
    Now my server is separated with SAP Router as below.
    SOLMAN  ---> SAP ROUTER ---> DEVELOPMENT
    In this scenario,  the Pre-configured RFC is blocked by SAP ROUTER host. So I am not able to evaluate the Development Server for further update.
    How to do route the RFC through SAP ROUTER ?

    I am check with below notes.
    #493501 SAProuterstrings within a TMS domain
    #492142 SAProuterstrings for TMS Domain Links
    But I don't know how to proceed with this . and how it will suit for my requirement.

Maybe you are looking for