Routing Vs rate routing

hi frnds,
whatz the differnce between rate routing and routing...
I knw that rate routing is used for REM..  what are the special fucntion that are avialable in rate routing over the normal routing...
Can we provide a rough production rate in rate routing say 50 qty per hr...
is that possible.....
any inputs... pls help.
regards
csn

Hi Mr.Sarvan,
<b><u>Routing:</u></b>
1.A routing determines the sequence of individual operations thar are necessary to produce a Finished product.
2.A Rotuing contains operations & information about work centres at which the individual operations are to be carried out,as well as standard times.
3.It contains the material components required for an operation as well as the nessary tools,jigs & fixtures.
4.Each routing can have one or more alternative sequences & one or more parallel sequences.
5.The planned time for each operation (standard value) is stored in a routing.
CA01,CA02,CA03 - Rotuing creation,change & display T codes.
<u><b>Rate Routing:</b></u>
1.One of the Routing type that's used in REM - Repetetive manufacturing.
2.CA21,CA22,CA23-Create,Change,Display rate routing respectively.
Regards
Mangal

Similar Messages

  • Standard routing and rate routing

    Hi All,
    Can someone tell me what tables I should use to get the standard routing and rate routing for the query?
    Thanks
    Edward.

    Dear,
    Yes you are right.
    The main difference between routing and rate routing is you can not create parallel sequence in rate routing CA21 only nothing else.
    There are lot of different opinion on this topic but there is no too much difference in them only we use rate routing in REM and normal in Discrete manufacturing.
    Also check this thread ,
    Difference between routing and rate routing
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Routing and rate routing

    Hi Gurus,
    Please explain me the difference between Routing and rate routing in details
    Thanks in advance
    Rupesh

    Hi,
    Functionality of Routing and rate routing is similar.
    Routing: It defines the sequence of operations that should be carried at a work center to make up a product.
    Routing is one of task list in PP module to carry out the production of finished and semi finished parts. it consists operation sequence which requires for manufacture finsihed and semi finished parts like operation 10. 20, 30...
    It is mostly used in Discrete Manufacturing
    Rate Routing: A routing for whose operations the production quantity and a fixed duration has been defined. Thus the production rate is also defined.
    Rate routings are used when you plan on a quantity basis, for example in repetitive manufacturing.
    With regards
    Ram Kumar

  • Difference between routing and rate routing

    frndz,
    Pls tell me the difference routing and rate routing.
    regards,
    Srini

    Dear ,
    [Rate Routing:]
    1.A routing for whose operations the production quantity and a fixed duration has been defined. Thus the production rate is also defined.
    2.Rate routings are used when you plan on a quantity basis, for example in repetitive manufacturing.
    3.A rate routing has the same structure as a routing. You can assign a rate routing to a material to be produced. It can have prallel sequences.
    [Routing]
    1.Routings are used directly in production orders for a material.
    2.A routing can be used without restrictions. Some functions from other task list types such as rate routings and inspection plans are also available in routings.
    3.As well as a standard sequence a routing can also have parallel and alternative sequences. You can assign a routing to a material to be produced.

  • What's the difference between routing and rate routing

    As we all know that routing normally used in discrete manufacture, and  rate routing used in REM, one of my client, the just use routing for REM instead of rate routing, are there any gurus can tell me some detail information about them?
    Thanks!
    Eric

    Hi,
    对于routing和rate routing来说,区别并不是很明显,但从流程的角度来说,routing适用于所有的离散型制造业,而rate routing适用于重复制造业!
    如果非要找出差别的话,就是routing可以定义并行序和可选序,而且rate routing只能定义并行序!
    具体的使用差别可以参考如下链接:
    http://help.sap.com/saphelp_45b/helpdata/en/03/bb1d0ca6e811d189010000e8323492/frameset.htm

  • Sequence selection in Rate Routing

    hi,
    In Normal Routing in sequence overview  - extras - new entries we can find the option of creating a Parallel or Alt sequence, but in Rate routing there is no way to select the type of Sequence. It by default shows Parallel sequence.
    Pl. let me know the step by step proceduer to create a Alternate sequence in Rate routing.
    regards

    Dear Rishi,
    We cant create any alternative sequence for a rate routing.This is one of the difference between routing and rate routing.
    Rate routing supports only standard and parallel sequence.
    If alternative sequence is present in a routing,then at the time of order creation the system gives a pop to select for alternative
    sequence or to skip it and proceed.
    For this under OPL8,for plant order type combination the field sequence exchange should be having value 2 - manual selection.
    Creating production version or sequence in my understanding depends on the business requirement.
    Check and revert
    Regards
    S Mangalraj

  • Difference between Routing & Rate Routing

    Hi All,
    can anyone tell me difference between Routing & Rate Routing? can we use routing for REM? if no, then what will be the effect?
    Thanks,
    Rinky

    Hi Rinky ,
                   Routing and rate routing are task list in broad manner .
    standard task list: Describes the worksteps necessary to produce a material or perform an activity without reference to an order.( that means they are created without reference to order )
    Essential objects of a task list are header, operations, material component allocations, production resources/tools and inspection characteristics.
    Together with specific dates and quantities, task list data forms an important part of the order.
    The following task list types exist in the R/3 System:
    routing
    reference operation set
    rate routing
    reference rate routing
    inspection plan
    maintenance task list
    standard network
    master recipe
    Routing is created with ca01 and rate routing by ca21 .
    Routing is used in discrete manufacuting and rate routing in repetitive .
    Rate routing generally has only one operation  and prod line instead of work centers and operations in routings .
    Both routings can be used for scheduling , cosing and capacity planning .
    Hope this was helpful answer !
    Neal
    Edited by: Neal Gibson on Jun 30, 2008 11:46 AM

  • Differences between rate routing and reference rate routings?

    Hello PP members:
    I would like to differences between rate routing and reference rate routings
    Thanks for your time,
    Thanks Again,
    Suren R

    Hi Mr.Suren,
    As explained by other friends Routing is used in Discrete manufacturing and Rate routing is used for REM-Repetitive manufacturing.
    In addional to these types SAP has given 2 more types
    1.Reference operation set -Used in Discrete manufacturing.
    2.Reference rate routing - Used in REM.
    If similar rate routing is been used for producing many materials,then instead of entering(these steps) in rate routing of each  material you create a refrence rate routing and you enter the work centres used and the other details.After saving you get a group counter number showing reference rate routing is saved with group XXXXXXXXX.
    When you are creating rate routing for a material say A ,after giving the name and plant details in the top you will be able to see an icon "copy from" and you can select the radio button for reference rate routing and give the group counter number. or else without giving it here you have got an option to select the reference rate routing after entering into the operation screen also.
    In that particular page in operation overview screen,there will be an icon copy,there you can click that icon and you can give the reference rate routing group counter number and very easily you can create rate routing for N number of material.
    Likewise you can use reference operation set while creating routing for a material in Discrete manufacturing.This basically reduces the time in creating routing or rate routing for materials in Discrete & REM respectively
    CA01,CA02,CA03-Create,Change,display (routing)  respectively.
    CA11,CA12,CA13-Create,Change,Display reference operation set Respectively.
    CA21,CA22,CA23-Create,Change,Display rate routing respectively.
    CA31,CA32,CA33-create,change,display reference rate routing resp.
    I hope this will help you.
    If useful reward your points.
    Thanks & regards
    Karthik.

  • Raouting, Rate Routing and Cost run Problem

    We have changed the our process from routing to rate routing.
    But while doing the cost run - CK40N, the sytem is considering the routing in stead of rate routing.
    Please advice.
    Regards
    Pranav

    Dear Pranav,
    1.Check what selection ID has been assigned in the quantity structure control tab(for the costing variant that is used for costing in
    CK40N) for routing selection,If it's 01 means,then check with selection ID 02 where the first priority is assigned for routing type R.
    (In standard SAP selection ID 01 by default has first priority to routing - N and then further prirority to rate routing - type - R).So
    assuming selection ID 01 is assigned and a product has both routing(task list type - N) and rate routing(task list type - R),now at
    the time of costing the system picks up the routing by default as the first priority is set for routing.
    2.Also check whether the task list type and the corresponding group and group counter has been changed in the production
    version for inhouse manufactured product either in MM02-->MRP4 view or else in C223.
    Check and revert back with your further queries.
    Regards
    Mangalraj.S

  • Routing & rate routing

    hello everyone,
    myself rekha bamgude,i want to know difference between routing & rate routing?

    Hi rekha to get a quick (or any) response, create your new discussion in a space related to your query.  This way it will be visible to topic experts who will then see and reply to it.   
    Please move this thread to the relevant forum Enterprise Resource Planning (SAP ERP)
    as you mention
    i want to know difference between routing & rate routing?
    Many times we told this word (Search before you post ).
    please see this thread for more details.
    Difference between routing and rate routing
    poorna

  • Problem in automatic rate routing selection

    Dear all,
    I am using REM and according to that I have maintained REM profile in Material Master, rate routing, line hierarchy, production version, but the time of scheduling of planned order, system is saying " The automatic selection of routing is not possible".
    I suppose I am missing some configuration.
    As also, I have already done the same scenario in other server.
    If u have any suggestion then pl. forward me.
    Thanx,
    Das

    Dear SAP PP,
    1.Check whether have you included the check box for REM allowed indicator in the production version.
    2.Also ensure you have assigned the rate routing option for detailed planning and the correct group and
    group counter in the production version.
    3.Check the valdiity dates of the rate routing,try to create a planned order in some advanced future date
    so that your rate routing is valid for the planned order start date.
    4.Check the status and the usage of the rate routing.
    Regards
    Mangalraj.S

  • Problem during Rate Routing Upload using BDC.

    Dear Sir/Madam,
    I am uploading Rate Routings using a BDC program which is working perfectly but having a single problem.
    In the initial screen of the transaction CA21(Create Rate Routing), I need to enter only the Material Number and its Plant and all the other fields should be left blank.
    But, here the group number field is automatically getting filled with the previous value and it is incrementing the group counter number. 
    I want the system to allocate different group number for  each Routing. I want the group number to be unique.
    Thanks,
    Ranjan.

    Dear Ranjan,
    While doing recording CA21. you would pass only the material number and plant (i mean you did recording of CA21 based on material number as well as plant not for routing number (group counter))
    Routing number (group counter) dynamic (In your case Internal number rage has assigned).
    So the Problem is:
    1st record of you internal table update smoothly because you program will pass only material and plant
    group counter (RC271-PLNNR) field is blank, after update 1st record system will regenerates the
    group counter number.
    ones the system updates the data it will generates Group counter number and assign to filed :(RC271-PLNNR).
    after saving the record system will go loop statement of you program. again program will call the call transaction statement with 2nd record of the internal table. call transaction statement pass the material number and plant field at ca21. but group counter number automatically poulated in the screen field because that time system can't be refresh the initial screen of CA21,
    so system will shows previous updated screen ( 1st routing record will show)
    Remove your bdc perform and add this code in your BDC perform.
    *        Start new screen                                              *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
       CLEAR BDCDATA.
       BDCDATA-PROGRAM  = PROGRAM.
       BDCDATA-DYNPRO   = DYNPRO.
       BDCDATA-DYNBEGIN = 'X'.
       APPEND BDCDATA.
    ENDFORM.
    *        Insert field                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
       IF FVAL <> SPACE.
         CLEAR BDCDATA.
         BDCDATA-FNAM = FNAM.
         BDCDATA-FVAL = FVAL.
         APPEND BDCDATA.
       ENDIF.
    *                Clearing the Group Counter                                *
       IF FVAL = SPACE.
         CLEAR BDCDATA.
         BDCDATA-FNAM = FNAM.
         BDCDATA-FVAL = FVAL.
         APPEND BDCDATA.
       ENDIF.
    above code: 1st time of call transaction FVAL = space means ( group counter field is blank)
    2nd and rest of the time FVAL <> space. means (previous record group number exists for new call transaction ) so system will be by pass with new record.
    Check with debugging mode. you will come to whats going in you code.
    Even i have go same problem while uploading routing data. i have find out solution after doing my RND.
    Regards,
    Akshath

  • Mass Changes to Rate Routing

    Dear All,
    We were trying to carry out mass changes to Rate Routing,
    by using CA85N we were able to make changes to Normal routing but not rate routing, in CA85N we were able to select only three types of task lists ie N, S & Q. Also checked in CWEB here also only the three types of task lists were provided for selection. Is there any other way for carrying out mass changes to rate rouitng, or settings in the above transactions.
    Regards
    Mithun

    Dear Mithun,
    In my understanding only CEWB can help you to some extent,otherwise you may have to develop some
    BDC's or LSMW's.
    Regards
    Mangalraj.S

  • Rate Routing Changes

    Hi All,
    Is there a possibilty to find out the changes made in the Rate Routing of a BOM regarding to Component Allocation over a period of time.
    Regards,
    R. Vijayakumar

    Dear Rajavelu,
    Try the standard report CA60,for task list type R - Rate Routing,include the check box for for all the options under Detailed Change
    documentation for and execute the report for some date range for any material and plant combination,this will satisfy your
    requirement.
    Regards
    S Mangalraj

  • Rate  Routing

    Dear Sir ,
                   i need sample program of Rate Routing Tcode CA21..Using BAPI or BDC CALL transcation ...........or tell me the BAPI Function module ....
    Pls Help to me ....
    With Regards ,
    Meena ...

    Hi,
    You can check the BAPI: BAPI_ROUTING_CREATE.
    Also you could check the following DI/BI steps in LSMW ( Not sure whether these objects work for Rate Routing Creation):
    Object               0170   Routing   
    Method               0001   Batch input
    Program name         RCPTRA01         
    Program type         B   Batch input  
    Object               0170   Routing     
    Method               0002   Direct input
    Program name         RCPTRA02           
    Program type         D   Direct input  
    But following IDOC could be used for loading Rate Routings:
    LOIROU02
    You can check the documentation in WE60.
    Hope thsi helps.
    Best Regards, Murugesh

Maybe you are looking for

  • Page designer show small view when using page template and cannot be run

    Dear Experts, I need to make some page templates. I have build 2 simple page templates, let say template0 & template1 which template1 using template0. It show no any problem until I close my Jdeveloper & reopen it. When I reopen template1, it show so

  • How to publish news without iWeb

    Hello, I would like to know if we can add news directly from the site without using iWeb, like a comment ??

  • Procedure call from SQL*Plus in Korn Shell Script

    I am trying to excute a procedure from sqlplus, truncate_audit_table. I doesn't execute. If I do it manually it executes. I have tried multiple ways, as below. This is inside a Korn Shell scripts that creates the procedure and counts the aud$ table.

  • Azure service administrator

    Hi Azure team, Will service administrator know when a new co-administrator has been added by another co-administrator? Will service admin will receive any mail alert? Thanks,

  • Sharepoint REST API - Bug in Sharepoint

    Hello, I found bug in sharepoint, where I can submit this bug or get answer from Microsoft about bug? Description: Open web appilication properties (Authentication Providers -> Default -> Anonymous Access -> check check box Enable anonymous access) C