Row-Based Only option for post processing operator

Hi,
Have a question on the role of the "Row-base Only" option for post processing operators. I am trying to understand how a post-processing operation can be done in a row-based mode. A coded PLSQL procedure in a post processing operator is expected to run only once. So I am not clear on how this option might affect the execution of the transformation. Any clarifications would be appreciated.
Thanks,
Mazen

Hi Carsten,
My question is more on what is the use of the "Row-based only" checkbox that shows up in the properties window for a post-processing operator. How does this checkbox affect the execution of the post-processing transformation?
Regards,
Mazen

Similar Messages

  • "Row-based Only" checkbox for a post processing operating

    Hi,
    Is there documentation available on the "Row-based Only" checkbox for the post-processing operator? Any links to more information on this would be appreciated.
    Regards,
    Mazen

    Hi Carsten,
    My question is more on what is the use of the "Row-based only" checkbox that shows up in the properties window for a post-processing operator. How does this checkbox affect the execution of the post-processing transformation?
    Regards,
    Mazen

  • "DD8x". Error message for loading process:Operating system error !

    Using the OLE command I receive the following error:
    Cannot load the file "File Name" with the loading process "DD8x". Error message for loading process:
    Operating system error <> !
    strCommand ="DATAFILEIMPORT('J:\ctf\GM\040119-2\dat7.dat','',0)"
    lsuccess = IDIACommand.CmdExecuteSync(strCommand)
    I get the same error with the "DataLoadHdFile" command.
    After the error happens, I cannot load any files in the directory until I
    reboot DIAdem.

    Hi punkmonkey,
    I'm curious why you compare the results of the "DataLoadHdFile" command with that of the "DataFileImport" command. The former is a time-honored DAT-file-specific command for only reading the header file contents-- NOT the data, and the latter is a brand new DIAdem 9.0 function for loading all sorts of data files-- TDM files included.
    If you want to load a DAT file using an OLE command, why don't you try the time-honored "DataLoad" command, which is specifically designed for loading DAT files? The "DataLoadHdFile" command is really only used to do selective loading (specific channels or rows) of part of a DAT file. Do you want to load selectively, or do you want to load all the channels from the DAT file?
    When you get the same error with
    the "DataLoadHdFile" command, are you executing that command also through OLE automation, or directly in DIAdem? What happens if you try both the "DataLoadHdFile" and the "DataFileImport" commands directly from DIAdem (no OLE)?
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

    When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

    Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
    It has been unchecked somehow...
    Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
    Cheers..
    Nigel

  • Workflow for Post Processing Magic Lantern RAW Video?

    Dear Adobe Community,
    I am interested in learning what steps/workflow fellow DSLR, Magic Lantern users take to Edit, Color Grade and add FX to their RAW video?  Here is my untested thought process so far:
    Adjust the Exposure, White Balance, Lens Distortion, Etc of DNGs in Adobe Camera Raw.
    Import DNG image sequence into Premiere Pro for Editing
    Use Dynamic Link to Color Grade in Speed Grade
    Use Dynamic Link to add effects in After Effects
    Render out in Premiere Pro
    One of the concerns I have is that I've read on the Magic Lantern Forums that Premiere Pro will reduce 14 Bit DNG to 8 Bit.  Is this something you've encountered?  Is there a workaround?
    I am fairly new to all of this and would greatly appreciate any feedback to point me in the right direction for Post Processing Magic Lantern Raw Video files.  I have a subscription to Lynda.com as well if you have any suggestions for courses to look at.
    Thank-you for your time.

    Nothing Adobe makes can read MLV or RAW video files, so you have to use something else to convert them into CinemaDNG (a folder of images) or a high bit depth movie file (ProRes etc.) - there are many tools listed in the ML forum which can do that.
    Premiere Pro can import cDNG footage but it struggles to play back in real time, and will not allow you to grade it using Camera Raw. To do that you have to use After Effects. The workflow is supposed to be "ingest in Prelude, edit in Premiere Pro, color in SpeedGrade", but quite frankly the learning curve for SG is massive. Adobe's attitude to CinemaDNG is strange; although the standard is open, support is only coded for very specific models of camera and the CC suite assumes a Hollywood workflow where professional colorists (who spend years learning how to use the software) operate offline from the rest of the edit, usually after all the cuts are made. It's not set up for a typical lone DSLR filmmaker, which is quite frankly why a lot of ML users prefer another well-known way to resolve the problem.
    The 'fast and dirty' approach to getting a cinematic grade in Premiere would be to apply LUT files to the footage using the Lumetri effect (basically running SpeedGrade presets), or you can hand-grade it using the inbuilt Color Corrector tools - but that doesn't cover the other important stuff that ACR can do, such as lens correction, alignment, noise reduction, camera calibration profiles, etc. - for that, you should import the cDNG footage into After Effects (which does support ACR), correct and calibrate the frames, then export back to something high quality that Premiere can work with (such as DNxHD or ProRes 444). You won't notice any visual loss in quality, and Premiere then will play the timeline without struggling, but it takes a loooong time to chew through every clip.
    As to if Adobe applications will ever support MLV files natively - well, since Adobe relies on close partnerships with camera manufacturers including Canon, you can guess what would happen if Adobe ever endorsed it. The only scenario I can imagine is if MLV is adopted in-camera by a major DC manufacturer (Alexa, etc) so vendors can support it without slapping Canon in the face. Flying pigs come to mind.

  • I can't remember the password I used when I did a "backup to computer". Does this mean that my only option for backing up my iphone from now on is using the cloud? #I've tried any PW i can recall ever using, I must have gotten creative darn it.#

    I did a backup decided to do a full backup with a password. I forgot the password I used (it was a couple of months ago and I must have gotten creative with it.) Without that password the option to back up to my computer is dead, right? My only option for backup will be the cloud. I want to be sure I understand the mess I am in.    I have tried the passwords I have used before, I cannot believe I did this

    This is asked and answered many, many times each and every day, iincluding several in the past few minutes.
    The forum search bar is on the right side of this page as is the More Like This section.
    You will find your answer there many times over.
    Type "unable to restore" into the search bar at the top of this page by Support and read the resulting help article.

  • BADI for post processing of IDOC BOMORD

    Hi experts ,
    I want a BADI for post processing of IDOC BOMORD. Actually after IDOC processing BOM got updated in system and i want to schedule the explosion of BOM in process order after it. Please update me with the solution.
    Thanks
    Nitin kapoor

    Roberto, thanks for your prompt reply (as always). 
    Actually, it seems that the deletion of the prior infopackage request is performed before executing the infopackage again (not after), I apologize.  I will try your suggestion, though.  If this is actually the correct FM, then I will award you full points!
    I must admit, though, understanding the parameters of the FM are difficult.  Can you aor anyone else provide more details?

  • HT204074 Is "Deauthorize All" my only option for Computer Authorizations?

    According to the support pages I have read, I should be able to "Manage Devices" on the Account Information page. But I only have "Deauthorize All" as an option. I'm I missing something? I'm I not looking in the right place? Is "Deauthorize All" my only option for Computer Authorizations?

    I have two lines, one on AT&T and one on Verizon.
    On AT&T, 450 minutes, 200SMS (200SMS is no longer offered) and unlimited data for $80.40 after taxes.
    On Verizon, I have 450 minutes, 1000SMS and 2GB Data for $86.
    There are pay as you go retailers out there such as Cricket but you will pay full price for the phone but less per month to use it.

  • I am trying to subscribe so that I can convert PDF to word. Get so far but only options for address are in USA, I live in England

    I am trying to subscribe so that I can convert PDF to word. Get so far but only options for address are in USA, I live in England

    Hi golfgerald,
    I'm sorry that you're having trouble subscribing. Please take a look in the lower-left corner of the Adobe.com website. Do you see "United Kingdom" listed as the region? If not, please click Change Region, and then choose United Kingdom.
    Did that do the trick?
    Best,
    Sara

  • Workflow for post processing offline images

    I'm a professional real estate photographer who normally edits his own images after a photoshoot. I've recently become so busy that I'd like to outsource the post processing of my images to another individual who also uses Photoshop.
    Is there a way to send this individual lower resolution images so he can work on them and then have him send me the metadata from his edits, so I can apply them to the images I have on my system? The reason for this question is because I'd like to minimize the size of the images I'm sending to the editor, but still be able to produce high resolution stills.
    I understand there is a way to work with RAW images and save the metadata, but that doesn't fix the file size issue, and you can only save certain aspects like white balance, levels, etc... I really need a way to capture his history and save that to a file, that way if he were to use a certain filter, or brush on the image, the same results would be applied to my images.
    Thanks in advance for your help!

    You can't apply the history log, it is just information on what has been done to the file. You would have to read this file and simply repeat the same steps on the higher resolution version of the file.
    As for the replacement work flow I mention: you would open the low resolution file that your worker created. Then you would use the Place command (under the File menu) to add your original high resolution version of the image as a new layer. This will make your image a Smart Object layer. Move this layer to the bottom of the layer stack, just above Background, if that is an option. Make sure your smart object is at 100% scale (when you place the file, it is shrunk to fit the existing document boundaries), you can do this by using Free Transform (under the Edit menu) and verifying the values at the top. Then use the Reveal All command (under the Image menu) to resize the canvas to fit the full resolution version of the image. However, this really will only work if the editing involved was pretty much nothing by adjustment layers. Any pixel edits will have to be resized as well and may loose detail or not line up correctly once enlarged.

  • What is the best option for my process

    Hi Gurus Can any one guide me which is the best available option for my business process.
    in our client process We have a Final Product(say A). and two Vendors (say Vendor1 and vendor2)
    This Final Product is made up of 3 other parts Lets say B,C and D.
    So The client buys Product B and Product C from the Vendor1 and Product D from Vendor2
    The vendor1 supplies the both the parts(A and B) to Vendor2.
    The Vendor2 Takes the Parts B, C and Joins with Part D and deliver the final product A to the client.
    There is no assembly cost for Vendor2- he charges for only part D.
    Can anyone tell which is the best available option for my client.
    Please help me ASAP
    Thanks

    Hi Amar,
    There are many other factors that you need to take into consideration to define best approach for the process.
    You have to know what type of control you want to have of the "production" of the product "A". Who is the owner of the components B and C while they are at vendor 2.
    Who is the payer and how are you going to receive invoices of vendor 1 (you receive invoices for components according to the quantity of product A you receive in your company, or you receive invoices for all B and C received at vendor 2??)
    Its no easy to give you a feedback without more information.

  • Are the new displays for MacBooks only - Options for a Mac Pro User?

    I am currently running 23 inch displays in our small design studio (4 workstations). I need a new or a second display for my own Mac Pro. I hate the new 24 inch display. I cannot imagine running Final Cut Studio on this glossy screen. So is anyone else out there in this situation? Looking for other choices? I want to stay in the Apple line up if possible but now I am even looking at Dells, as I feel Apple will only continue with the glossy screens.
    Are any pro-users in video or photography using the new 24 inch displays? and I mean users who do this for a living. Thanks everyone?

    Hello!
    Sorry it took a while to notice your post. There are two options for your mac pro to use the new 24 inch cinema display. The ATI Radeon 4870 HD has the mini-display port on it, and the Nvidia GT120 also is an option. Personally, I'd go with the 4870 as its a much better graphics card.
    You can find them on the Apple store's site under DISPLAYS/Graphics
    Hope this helps.
    Now, just to clear something up. If you have a 2008 mac pro, you can run the GT120 if you prefer.

  • OVD mappings: support for post-process filtering

    Hi all,
    does anyone know if post process filtering is possible via python's mapping scripts using a method similar to java's com.octetstring.vde.util.FilterUtils.evalFilter(Entry e, Filter f)?
    This functionality is required when you have to work with ldap filters in inbound traffic, that contain references to virtual attributes, ie attributes that do not really exist on the backend data store and have no one to one mapping with a real attribute/column . Such filters have to be omitted in the inbound traffic and apply them on the outbound traffic after the virtual attribute has been constructed.
    I know how to process the filter elements and how to pass the "infected" element of the filter from the inbound to the outbound via the request method, but I dont' know if there is an easy way to apply the filter on the outbound results.
    Think of an employeeType attribute (this is the virtual attribute) that is constructed based on the prefix of the value of the employee_code (this is a real column in DB). Now think of a user filter like (employeeType=something)

    Have you attempted something similar before? Have you done it in python? Regarding this custom logic I see two issues
    a)do I have to loop in the results set, to process each entry in the results? Is there a ready method to apply directly the ldap filter on the results set?
    b)in order to cope with substrings within ldap filters do I have to built custom code to simulate ldap regexp and escape codes? I would welcome a method to apply directly a filter at least on entries if the first option is not possible.

  • ABAP or FM for post-processing of infopackage

    Gurus,
    Does anyone know the name of the ABAP program or function module that handles the post-processing of an info-package.  For instance, we have an infopackage that needs to delete prior reqeusts where the selection criteria match.  The infopackage is setup to perform the delete, and it works if we execute the infopackage manually.  However we would like to run in the middle of a batch job that executes several ABAP programs.  We already have an ABAP program that runs the BAPI to execute the infopackage, but it does not delete the prior request from our cube.
    Note:  We are running an old APO system (BW 2.1C), so we cannot use process chains. 
    Thanx in advance for your help.

    Roberto, thanks for your prompt reply (as always). 
    Actually, it seems that the deletion of the prior infopackage request is performed before executing the infopackage again (not after), I apologize.  I will try your suggestion, though.  If this is actually the correct FM, then I will award you full points!
    I must admit, though, understanding the parameters of the FM are difficult.  Can you aor anyone else provide more details?

  • Control key for external process operation & internal.

    Hello,
    We have created one control key (ZP01) T code OP67.
    In the customisation (OP67) for "External processing" selection field we select "X" i.e. "Internal processed operation / Extarnal processing possible.
    If this field is blank then it is a "Internal operation"
    If this field is "+" Then it is external operation, in this case system creates the purchase requisition after release the production order.
    We want to know,
    If this field is with "X", then what is the proceedure to create the purchase requisition for external operation.
    Thanks in advance.
    Best regards
    Nilesh

    Hello Brahmankar,
    Thanks for your prompt detail reply.
    As per your suggestion already we have that setting for another controll key (PP02)
    It is std for SAP it is working fine, in this control key the setting is "+" for external proceesing in OP67.
    Now my requirement is instead of "+" I made it "X" i.e. Internal processed operation / External processing possible. In this case system is not generating purchase requisition after production order release.
    I want to know for external processing whether I have to create purchase requisition manualy?
    or any other process we have to follow?
    Thanks & Regards,
    Nilesh..

Maybe you are looking for

  • How to tint a JPanel that paints an Image

    Hello all, I have a basic understanding of Java Swing architecture and the Drawing capabilities of the Graphics and Graphics2D classes. However, i am utterly confused how to implement a basic tint over an image. Overview: I have a GCard (Graphical Ca

  • How can I download free apps without a credit card or paypal

    I need to reinstall some free apps and I don't have a credit card now or paypal. How can I do it

  • Content Query Web Part gives error when trying to edit

    Hello there, When I put the page in edit mode and try to edit the content query web part I get an unexpeced error. When searching the correlation ID from the error message I see this message a lot: 07/08/2014 11:51:03.72 w3wp.exe (0x5370)            

  • Need help using method check_changed_data correctly

    I'm using method check_changed_data in my ALV program to update the grid with changes the user makes. The method works fine for this purpose. But I also want to know if any data actually changed. Can anyone give me an example? FORM update_vendor . do

  • Sample code and tutorial for JSR188 (CC/PP) ?

    Hi there, I would be grateful if you could show me the way!!! :) Just some URL's would be find. I just want to learn how to use the JSR188 API. Thanks anyone, Stavros.K.