RPCIPE00 - Dump during import_from_table

Dear all,
After an upgrade ( 4.6 to ECC6 non unicode) we are facing a dump during rpcipe00.
The reason is "import_alignement_mismatch". The class who call this exception is CL_HR_PAY_RESULT_FR.
I did not found some OSS on that.
Did someone already face this ?
Thanks in advance !
Cheers,
Mathieu
FRANCAIS **********
Bonjour,
Après un upgrade (de 4.6 vers ECC6.0 non unicode ) nous rencontrons un DUMP lors de l'execution du RPCIPE00. La raison du DUMP est "import_alignement_mismatch" . Cette execption est appelé par la classe CL_HR_PAY_RESULT_FR.
Avez vous déjà rencontré ce problème ?
Une piste de recherche ?
Merci d'avance.
Bien à vous,
Mathieu

During our upgrade from 4.6C to 6.00, we had to convert our IT0224 into IT0461 to IT0464 (Canada), and if I remember correctly we also had to "rebuild" our RT and CRT tables.
Check the Release Notes on SAP's website, specially those related to Enterprise 47x110.

Similar Messages

Dump during BAPI_ENTRYSHEET_CREATE calling from Portal

Hi,
I am getting dump during creation of Service Entry Sheet using the 'BAPI_ENTRYSHEET_CREATE' when triggering it from Portal end. But if I directly call the FM from ECC6.0 with the same passing values it gives me the success meassage. The dump only occurs when I am triggering it from Portal via another custom RFC funtion module.
I have checked in ST22 and the message text is like ....." Exception condition "GUI_NO_MODE_AVAILABLE" raised."
Also have checked the SAP Note1271652 and have suggested to apply kernel patch 184. But kernel patch 185 already been applied as our basis team have confirmed. Can you please help me out of this situaion.
Thanks & Regards,
Apurba

Hi,
I came across this issue and have blogged a solution that gets round it for our purposes. This may help:
http://community.altiusconsulting.com/blogs/adamadshead/archive/2009/09/24/bex-analyzer-s-file-upload-bug-when-integrated-with-sap-portal.aspx
Regards,
Adam

Dump during creation of service entry sheet (ML81N)

Dump during creation of service entry sheet (ML81N)
Hi,
ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.--> enter (here we get Dump ABAP RUNTIME ERROR "TABLE_INVALID_INDEX").
This is happening only for some POs. What can be the problem?. Is this has something to do with SAP database ???
- rahul

Hi,
it could have the cause that the note 1113220 was missing from your system or that data are inconsistent in your PO.
If you implemented 1113220 and you still get the dump, please check in transaction ST22 the run time error long text to the dump:
Parts:
- How to correct the error?
- Information on where terminated
- Source Code Extract -> if you set a breakpoint before the line where the error occured, you could debug the process.
- Active Calls/Events: if you have an own program displayed here, please check first your program wether it has caused the issue.
If these do not help to find out the problem cause, please open a SAP ticket and include all of the relevant information regarding the dump.
Regards,
Edit

ABAP Dump during GRN posting with excise

Hi Gurus,
We are using TAXINN procedure. We have created a taxcode V2 and have done all assigenments & condition recordes. We have created a PO with V2 tax code . Now while doing the GRN in MIGO, after excecise capture , its throwing runtime error (ABAP Dump) during Posting. Message is "Tax code V0 does not exist in Taxinn" . But we have not maintained V0 in PO. We have used V2.
Answers will be rewarded. Thanks in advance..
Regards
Basab

Check for your condition record
may be in condition record for plant , material combination you have mantain there V0 tax code.

Short dump during activating the BC Set in SCPR20 - "GETWA_NOT_ASSIGNED"

Hi experts,
We have upgraded from SRM 4 to 7.0.We are facing an issue when activating the BC Set in SCPR20. A short dump is occuring inside the program 'VIRSA/SAPLZVIR'. We got the solution that some correction instructions mentioned in the SAP Note 1095700 needs to be mplemented. The steps mentioned in the Note are,
1) Run transaction SE54 and click the button 'Edit Function Group'.
2) Next, enter the name of the function group /VIRSA/ZVR1.
3) Select the radio button option 'Re-generate group-specific programs',and press the 'Change' button.
4) In the following popup please mark only the option 'structure spec.data declaration renewal' and press enter.
We were able to proceed with the first two steps but stuck up during the execution of step3. When we selected the radio button u2018Re-generate group-specific programsu2019 and when clicked on the change button, we are getting a message like u2018the name space u2018/VIRSA/ZVR1u2019 does not exists. Because of this we are not able to proceed with the last step.
Kindly provide some ponters as of how to overcome this issue ..
Thanks in advance,
Dhan

Hi there,
To overcome this error you need to go to se06 and make the "/VIRSA/" namespace as Modifiable.
Also, you should have a look at the following note if my first suggestion doesn't work.
1041089 Tx SCPR20: GETWA_NOT_ASSIGNED dump during BC Set activation
Hope this helps.
Kind Regards,
Matthew

Short dump during ME23N transaction due to missing field in KOMP table

Hi All,
We have just upgraded to Business Suite 7.0 and are experiencing the following error:
Short dump during processing of transaction ME23N - error is in program SAPLV61A when the system calls the following field: KOMP_SERVICE_PARAM2 (this does not exist in KOMP). We need to get this resolved as soon as possible, It appears that SAP have removed this field from the table KOMP but the standard programme is still looking for this field. Can anyone provide an oss note number or insight into how to resolve this issue please.
Many Thanks
Amanda

Dear,
This problem is caused by a missing initialization of the structure KOMP in the program SAPLV61A.
The problem may also occur during , when the "Create PO automatically" indicator (TVAP-ALEKZ) is set for the relevant item category in the item category Customizing (transaction VOV7). In this case, the data of the purchase order item that was previously processed is used for the back update of the sales order from the purchase order in KOMP.
Add the following import parameter to the function module RV_KONV_SELECT:
    Parameter name        COMM_ITEM_I
    Typing          LIKE
    Associated type            KOMP
    Optional        X
    Pass Value       X
Please refer the OSS note 1261566.
Regards,
R.Brahmankar

Error in Import Java Dump during installation on MSCS

Dear Experts,
I am facing the following the error during ECC 6 dual stack installation on MSCS.
PM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
Apr 29, 2011 5:40:30 PM com.sap.inst.jload.Jload logStackTrace
SEVERE: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:395)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:166)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
     at com.sap.inst.jload.db.DBConnection.connectViaSecureStore(DBConnection.java:105)
     at com.sap.inst.jload.db.DBConnection.connect(DBConnection.java:149)
     at com.sap.inst.jload.Jload.main(Jload.java:580)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
I have successfully installed ASCS,SCS, and configured 1st MSCS node.
While installaing DB instance on 1st node SAPINST did not allow the physical host name of the node and gave the error oracle was not installed,install oracle before continuing so went ahead with the virtual hostname.I had faced oracle connectivity issues during import ABAP ,I changed the added the physical host name in listener.ora and continued.But durig the import java dump phase I guess the physical host name in expected in secure store key file.I can't edit the secure store file as config tool is not installed yet in the system.Please suggest me solutions and guide me whether I am going in the right direction.
Regards,
Dinakar
Edited by: mutnuru dinakar on Apr 30, 2011 10:22 AM

I have successfully installed ASCS,SCS, and configured 1st MSCS node.
While installing DB instance on 1st node SAPINST did not allow the physical host name of the node and gave the error oracle was not installed,install oracle before continuing so went ahead with the virtual hostname.I had faced oracle connectivity issues during import ABAP ,I changed the added the physical host name in listener.ora and continued
The SAPINST should allow the physical host name to get chosen you should not get this error.
You have to first install the oracle DB and after that Oracle failsafe at both nodes ( not in parallel) . Further while doing the DB instance installation on first node the SAPCLUSTER and ORACLECLUSTER should be online.
Can you mark the steps you did in sequence.
Regards
Edited by: Singh Dharm on Apr 30, 2011 2:06 PM
Edited by: Singh Dharm on Apr 30, 2011 2:08 PM

Dump during testing of ECC 6.0

Dear All,
My client is upgrading from 4.7 to ECC 6.0. During testing of the new system dumps for some transactions have been arising.
For the transaction codes F-06, F-07, FBL5N and FB02 same kinds of errors have been found with similar program u201CSAPMF05Lu201D in the line no 1023. In the BSEG table the value of Docln is found out to be u201C#u201D for all the documents that have been imported from 4.7 to ECC 6.0.
Please note that these transactions are still working fine in the 4.7 system.
Below is the detail description of the error that we are receiving in ECC6.0 for the above mentioned transaction codes.
Steps to recreate the dump:
1.     Go to T-code FBL5N
2.     Provide the u201Ccustomer accountu201D, u201Ccompany codeu201D and u201Copen at key dateu201D. Then Execute.
3.     Double click on the Doc date and the dump occurs.
How do we go about it..
Regards,
Arvind

My issue has been resolved after running below program which SAP has recommended.
Run this report in the Dev --->ZF_DOCLN_UPDATE_YJ
*& Report ZF_DOCLN_UPDATE_YJ
*&Report to update the DOCLN field in BSEG, which has a hex value and is
*&shown as # to initial. Please note this report is not to be used for
*&FAGLFLEXA table problems.
REPORT zf_docln_update_yj.
TABLES: bseg.
DATA: BEGIN OF itab_bseg OCCURS 0,
bukrs LIKE bseg-bukrs,
belnr LIKE bseg-belnr,
gjahr LIKE bseg-gjahr,
buzei LIKE bseg-buzei,
docln LIKE bseg-docln,
END OF itab_bseg.
DATA: cnt TYPE i,
cnt_commit TYPE i.
FIELD-SYMBOLS: <docln>.
CONSTANTS: c_badchar(2) TYPE x VALUE '0000',
c_commit TYPE i value 10000.
SELECTION-SCREEN BEGIN OF BLOCK 001 WITH FRAME.
SELECT-OPTIONS: p_bukrs FOR bseg-bukrs,
p_gjahr FOR bseg-gjahr,
p_belnr FOR bseg-belnr,
p_buzei FOR bseg-buzei.
PARAMETERS: update AS CHECKBOX,
detail AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK 001.
SELECT *
INTO CORRESPONDING FIELDS OF TABLE itab_bseg
FROM bseg
WHERE bukrs IN p_bukrs
AND belnr IN p_belnr
AND buzei IN p_buzei
AND gjahr IN p_gjahr.
ASSIGN itab_bseg-docln(1) TO <docln> CASTING TYPE x.
LOOP AT itab_bseg.
IF <docln> EQ c_badchar.
IF update = 'X'.
ADD 1 TO cnt_commit.
UPDATE BSEG SET docln = space
WHERE bukrs = itab_bseg-bukrs
AND belnr = itab_bseg-belnr
AND gjahr = itab_bseg-gjahr
AND buzei = itab_bseg-buzei.
IF cnt_commit GE c_commit.
COMMIT WORK.
CLEAR cnt_commit.
ENDIF.
ENDIF.
ADD 1 TO cnt.
ELSE.
DELETE itab_bseg.
ENDIF.
ENDLOOP.
IF update = 'X'.
COMMIT WORK.
FORMAT COLOR COL_NEGATIVE INTENSIFIED.
WRITE: /'Update Run'.
FORMAT COLOR COL_NEGATIVE INTENSIFIED OFF.
ELSE.
FORMAT COLOR COL_HEADING INTENSIFIED.
WRITE: /'Test Run'.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED.
WRITE: /'Report run by ',sy-uname, 'at',sy-uzeit.
FORMAT COLOR COL_GROUP INTENSIFIED OFF.
ULINE.
SKIP 2.
ULINE.
FORMAT COLOR COL_GROUP INTENSIFIED.
WRITE: /'DOCLN changed for Documents'.
FORMAT COLOR COL_GROUP INTENSIFIED OFF.
ULINE.
WRITE: /5 'CoCode',
15 'Doc Num',
30 'Line no',
45 'Fiscal Year',
60 'Six-Figure Line Item for Ledger'.
ULINE.
IF detail EQ 'X'.
LOOP AT itab_bseg.
WRITE:/5 itab_bseg-bukrs,
15 itab_bseg-belnr,
30 itab_bseg-buzei,
45 itab_bseg-gjahr,
60 itab_bseg-docln.
ENDLOOP.
ENDIF.
WRITE: /1 'BSEG Line Item Update Count:', cnt.

Dump during extraction for the custom datasource (ZFI_GL_14).

Hello all,
we are using Ecc 6.0 and we havent installed Enhancement Package 3. However our requirement is to create a custom datasource (ZFI_GL_14) similar to the standard one (0FI_GL_14). Initially we created the custom DS same as the standard one with the extraction method using Function Module. By default custom DS was assigned with extraction method F2. By running a program we changed F2 to F1 to resemble the standard one and made it as delta enabled as specified in the standard extractor.
when we started extracting the custom DS using RSA3, we encountered so many errors and resolved them. However still we are getting some more errors which requires your help.
1. While testing One of the function module FAGL_GET_LINE_ITEMS, it throws following ABAP dump.
Short text
|    A dynamically specified FROM clause has an unexpected format.
|What happened?
|    Error in the ABAP Application Program
|
|    The current ABAP program "SAPLYPFI_FAGL_ITEMS_SELECT_BW" had to be terminated
|     because it has come across a statement that unfortunately cannot be executed.
|Error analysis
|    An exception occurred that is explained in detail below.
|    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
|     caught in
|    procedure "YPFI_FAGL_GET_LINE_ITEMS" "(FUNCTION)", nor was it propagated by a
|     RAISING clause.
|    Since the caller of the procedure could not have anticipated that the
|    exception would occur, the current program is terminated.
|    The reason for the exception is:
|    The running ABAP program attempted to execute an Open SQL statement in
   which a FROM clause was specified dynamically in the field "LD_DBTAB_SYNTAX".
|     In this
|    FROM clause, either a table name after a join operator is missing, or an
|     alias name after the key name "AS". The field "LD_DBTAB_SYNTAX" could be empty as well.
|Missing RAISING Clause in Interface
|    Program                                 SAPLYPFI_FAGL_ITEMS_SELECT_BW
|    Include                                 LYPFI_FAGL_ITEMS_SELECT_BWU01
|    Row                                     1
|    Module type                             (FUNCTION)
|    Module Name                             YPFI_FAGL_GET_LINE_ITEMS
|Trigger Location of Exception
|    Program                                 SAPLYPFI_FAGL_ITEMS_SELECT_BW
|    Include                                 LYPFI_FAGL_ITEMS_SELECT_BWU01
|    Row                                     353
|    Module type                             (FUNCTION)
|    Module Name                             YPFI_FAGL_GET_LINE_ITEMS
|Source Code Extract
|Line |SourceCde
| 323|                                  lt_fields_flexgl
| 324|                                  lt_fields_table1
| 325|                                  lt_fields_table2
| 326|                                  gv_si_table "erste Tab immer Flexgl?
| 327|                                  gc_bkpf
| 328|*                                  ' '
| 329|                                  gc_bkpf_aedat
| 330|                                  'X'
| 331|                            CHANGING ld_dbtab_syntax
| 332|                                     lt_fldlist_s
| 333|                                     lt_where_tab[].
334
| 335|*       open cursor
| 336|        DESCRIBE TABLE lt_where_tab LINES ld_lines.
| 337|        IF ld_lines GT 0.
| 338|          delta_dbcnt          = 0.
| 339|          old_dbcnt            = 0.
| 340|          flag_cursor_open     = 'X'.
| 341|          cursor_flag          = 'X'.
342
| 343|          OPEN CURSOR WITH HOLD i_cursor FOR
| 344|          SELECT (lt_fldlist_s)
| 345|            FROM (ld_dbtab_syntax) CLIENT SPECIFIED
| 346|             WHERE (lt_where_tab).
| 347|        ELSE.
| 348|          delta_dbcnt          = 0.
| 349|          old_dbcnt            = 0.
| 350|          flag_cursor_open     = 'X'.
| 351|          cursor_flag          = 'X'.
352
|>>>>>|          OPEN CURSOR WITH HOLD i_cursor FOR
| 354|          SELECT (lt_fldlist_s)
| 355|            FROM (ld_dbtab_syntax) CLIENT SPECIFIED.
| 356|        ENDIF.
357
| 358|        st_selection[] = lt_selection[].
| 359|        st_fieldlist[] = lt_fieldlist[].
| 360|        sd_dbtab_syntax = ld_dbtab_syntax.
| 361|        st_fldlist_s[] = lt_fldlist_s[].
| 362|        st_where_tab[] = lt_where_tab[].
| 363|        st_seltable2[] = lt_seltable2[].
364
| 365|      ENDIF.   "cursor_flag
366
| 367|      lt_selection[] = st_selection[].
| 368|      lt_fieldlist[] = st_fieldlist[].
| 369|      ld_dbtab_syntax = sd_dbtab_syntax.
| 370|      lt_fldlist_s[] = st_fldlist_s[].
| 371|      lt_where_tab[] = st_where_tab[].
| 372|      lt_seltable2[] = st_seltable2[].
Line 353 contains the error.
1. L_DBTAB_SYNTAX. As per the statement this field should bring the table name, but it is not bringing any value                          whiledebugging.
2.also lt_fldlist_s should bring the field names.
As this is for New GL line item datasource, I am not sure what fields should lt_fldlist_s and what table name , and wheretab value should come , so that the function module can extract the data.
Kindly help me to get an insight into this issue and to get it resolved.
thanks,
Praba...

Hi Frank,
yes I agree. That was the first question that came to me in my mind. However, the job was handed over to us, and we were able to exactly create the custom DS , FM and Function groups as similar to the standard one and everthing got activated perfectly. But during extraction, it throws the dump.While debugging, the function module is not able to pick the value for the 3 fileds which I stated above in one of my queries. The main extractor for this Datasource is FAGL_GET_SI_DATA and it uses the extract structure FAGLPOSBW.This Main function module in turn calls one more FM, FAGL_GET_LINE_ITEMS by exporting below parameters.
CALL FUNCTION 'FAGL_GET_LINE_ITEMS'
          EXPORTING
            i_block_data = 'X'
            i_block_size = sd_max_lines
            i_selection = lt_select_int
            i_fieldlist = lt_fields_int
            i_initflag   = i_initflag.
      ELSE.
From my observation , the above statements i_selection = lt_select_int and i_fieldlist = lt_fields_int should contain/pass the value to the line items FM, FAGL_GET_LINE_ITEMS.In the above thread also I mentioned I didnt get the value for ld_dbab_syntax, lt_fieldlst_s and ld_where_tab. I believe it is simply because i_selection and i_fieldlist is not getting the value from lt_select_init and lt_fields_init respectivelyImport parameters for this FM is as below.
I_BLOCK_DATA     TYPE     C
I_BLOCK_SIZE     TYPE     SY-TABIX
I_SELECTION                           TYPE     GUSL_T_SELECTION
I_FIELDLIST                           TYPE     GUSL_T_FIELDS
I_INITFLAG                           TYPE     GUSL_BOOL
I_CHANGED_RECORDS      TYPE     GUSL_BOOL
export parameter for this FM is as below.
FLAG_CURSOR_OPEN     TYPE     FLAG
Changing parameter for this FM is as below
C_T_FAGLPOSE     TYPE     FAGLPOSE_T
where FAGLPOSE means Fields for Reading Data: Line Items: New General Ledger.GUSL_T_SELECTION is the same type like DDIC table type FB_T_FIELD_SELECT_OPTIONS which will have Fieldname and selection option range.GUSL_T_SELECTION is created within the type group GUSL as mentioned below.
TYPES: BEGIN OF GUSL_S_SELECTION,
       FIELDNAME LIKE DFIES-FIELDNAME,
       T_RANGE   TYPE GUSL_T_RANGE,
       END   OF GUSL_S_SELECTION,
       GUSL_T_SELECTION TYPE GUSL_S_SELECTION OCCURS 20.
wherein
FIELDNAME LIKE DFIES-FIELDNAME,
DFIES: --> DD Interface: Table Fields for DDIF_FIELDINFO_GET. Also GUSL_T_FIELDS refers to DFIES.
Regards,
Praba..

Dump during mvt type 103.

I am doing MIGO - GR against Outbound Delivery with Mvt type 103.
I receive the following dump. If for the same case if I do MIGO via 101 then no dump observed.
What could be the determining factor which creates dump while 103 & not with the case 101?
Dump as follows -
Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_X
ABAP Program           SAPMM07M
Application Component MM-IM
Date and Time          03.09.2014 12:47:09
Short text of error message:
Posting termination to ensure data consistency - SAP Note 1776835
Long text of error message:
Diagnosis
     The material document posting was terminated to maintain data
     consistency. An expected COMMIT WORK or ROLLBACK WORK statement wa
     triggered which is in turn caught by this error.
     Data has already been preselected for the UPDATE at the time of th
     COMMIT or ROLLBACK. If a COMMIT WORK or ROLLBACK is initiated in a
     enhancement, these are then written or rolled back into the
     database. If another error occurs during subsequent processing
     after a COMMIT, a complete ROLLBACK can no longer be performed,
     since the data up until the point of the COMMIT has already been
     written to the database. Otherwise, if no further errors occur
     following a ROLLBACK statement, the part that is subsequently
     entered into the posting is also written to the database.
     This can result in an inconsistent status, for example a material
     document without accounting document or an accounting document
     without a material document, which can only be repaired with
     considerable cost and effort.
     Inconsistencies that were caused by an incorrect implementation
     must be corrected by SAP in accordance with SAP Note 83020, subjec
     to charge.
System Response
Procedure
     Remove the critical sections of code from your customer
       enhancements, such as MB_DOCUMENT_BADI. For more information about
       this error and how to avoid it, see SAP Note 1776835.
   Procedure for System Administration
Anybod
Technical information about the message:
Message class....... "M7"
Number.............. 685
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "

Dev,
I want the BADI, which will trigger the GR-mail after the material document is posted by the system, so that there will be no conflict with the 'Commit Work' which I have written in customer enhancement before system is committing for posting.
If I will get some BADI after the material DOC is posted in MIGO-GR-103Mvt type,then it will do my work of triggering the mail.
Wanna BADI that can used/Triggered after posting the MM-Doc in GR-103 Mvt type.

Dump during BDLS (Refresh BW)

Hello,
We are currently working on a BW refresh and during the BDLS we get the following dump:
Category                       ABAP Programming Error
Runtime Errors              OBJECTS_OBJREF_NOT_ASSIGNED
ABAP Program              SAPLRSBK_AFTER_IMPORT
Application Component   BW-WHM-DST
Date and Time               10.04.2014 01:47:55
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSBK_AFTER_IMPORT" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: " ").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" " "
"SAPLRSBK_AFTER_IMPORT" or "LRSBK_AFTER_IMPORTF02"
"DTP_CONVERT_AFTER_LS_CHANGE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
    SAP Release..... 702
    SAP Basis Level. 0009
    Application server... " "
    Network address...... " "
    Operating system..... "Windows NT"
    Release.............. "6.1"
    Hardware type........ "2x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... " "
    Database type..... "MSSQL"
    Database name..... "WV1"
    Database user ID.. "wv1"
    Terminal.......... " "
    Char.set.... "C"
    SAP kernel....... 720
    created (date)... "May 7 2010 02:47:09"
    create on........ "NT 5.2 3790 S x86 MS VC++ 14.00"
    Database version. "SQL_Server_9.00 "
    Patch level. 46
    Patch text.. " "
    Database............. "MSSQL 9.00.2047 or higher"
    SAP database version. 720
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows NT 6.0, Windows NT 6.1"
    Memory consumption
    Roll.... 0
    EM...... 125693760
    Heap.... 0
    Page.... 204800
    MM Used. 21725312
    MM Free. 3409648
User and Transaction
    Client.............. 200
    User................
    Language key........ "E"
    Transaction......... "BDLS "
    Transaction ID...... "FFFABFE3FA43F128BEA5005056B349F8"
    EPP Whole Context ID.... "005056B349F81EE3AFFF1C89DB1E7EA5"
    EPP Connection ID....... 00000000000000000000000000000000
    EPP Caller Counter...... 0
    Program............. "SAPLRSBK_AFTER_IMPORT"
    Screen.............. "SAPMSSY0 1000"
    Screen Line......... 6
    Debugger Active..... "none"
Information on where terminated
    Termination occurred in the ABAP program "SAPLRSBK_AFTER_IMPORT" - in
     "DTP_CONVERT_AFTER_LS_CHANGE".
    The main program was "RBDLSMAP ".
    In the source code you have the termination point in line 74
    of the (Include) program "LRSBK_AFTER_IMPORTF02".
We found some SAP Notes but they are specific for different SAP versions or SP level.
Any help will be really appreciated.

Kindly check notes
1887227 - P31:DTP:Dump in After Import:RS_DTPA_AFTER_IMPORT
1684050 - Converting the logical system name for DTPs - Changes1642327 - RSBKDTP_BDLS: dump with error OBJECTS_OBJREF_NOT_ASSIGNED
BR,
K.

Short Dump during Business Content Installation

Hi Gurus,
       I'm working on SAP BI 7.0. I'm getting a Short Dump Error stating " Program error: ASSIGN with length 0 in program "SAPLSNR3". " while I'm try to install the Business Content.
      I'm getting this error when I'm trying to install Business Content with Grouping Option " Data flow Before ", but I didn't face any problem when I started off with the Grouping Option " Only Necessary Objects ".
     I tried analysing this problem by going to ST22 transaction & during my analysis I found that in the said program " SAPLSNR3 ", there's LSNR3F01 include in which line number 178 is having a ASSIGN statement, where its trying to assign a computed value to some data variable. Now i understand that there's some problem with the value getting computed in the ASSIGN statement.
     I also tried finding some SAP Notes for the same problem, but to my misery I couldn't find anything appropriate. Could anyone of you who had faced similar problem help me out.
     For further assistance in making your replies much easier here in I'm adding the information about BI 7.0 system components.
           SAP ABAP:               Level 12
           SAP BASIS:               Level 12
           SAP BW:                   Level 14
           Business Content:       Level 5
Waiting for a early solution from U guyz.........
Regards,
Syed Shujaath Ali.

Hi,
Apply SAP BW: Level 19 or 20
Business Content: 10
patches .

Dump during archive job runs - TSV_TNEW_PAGE_ALLOC_FAILED (snote 1017000)

Hi All,
    I'm currently having problems with the deletion/archiving process on one of my XI boxes. I has been
configure to use the Switch Procedure and, the error happens during the TABLE_SWITCH procedure.
    Due to this error, I have 1 dump per day and the other jobs related with this task are failing.
    The dump says:
           TSV_TNEW_PAGE_ALLOC_FAILED
    and I have found note 1017000 for this issue and sucesfully applied.
    According to the note, next step should be:
             "To stop the archiving process, start the deletion process for the failed
              archiving runs manually directly from the archive administration."
    by I'm not able to do that. I go to XMS_SATA and with object name BC_XMB try to run the "Delete" action
    but can not continue as there is no archive file to select.
    Anyone with the same issue?
    Thanks in advance?

Hi Prateek,
   Thanks for your help but I don see how is this related to XI. I read about IS-OIL and IS-MINE. I already found a note that helps with this issue but I'm stuck with one of the steps and can cancel the copy process.
    Regards,
        Encinas

11gr2 crsd core dump during failover or start attempt on second node

Hi,
I installed 11gr2 with ASM on one node (solaris SPARC). Then I added another node to this cluster (via addNode.sh script).
Than got strange error: If my first node is up, second node is started fine and run well. If I shutdown first node - crsd on second node dump to core and fails to restart. I get the same error if I try to start second node when the first one is down.
In the crsd.log I see the following:
[ clsdmt][2]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=mskbkp2DBG_CRSD))
2010-03-03 17:31:35.330: [ clsdmt][2]PID for the Process [18669], connkey 1
2010-03-03 17:31:35.331: [ clsdmt][2]Creating PID [18669] file for home /u01/grid/11.2.0 host mskbkp2 bin crs to /u01/grid/11
.2.0/crs/init/
2010-03-03 17:31:35.331: [ clsdmt][2]Writing PID [18669] to the file [u01/grid/11.2.0/crs/init/mskbkp2.pid]
2010-03-03 17:31:35.925: [ default][1] CRS Daemon Starting
2010-03-03 17:31:35.933: [ default][1] ENV Logging level for Module: AGENT 1
2010-03-03 17:31:35.934: [ default][1] ENV Logging level for Module: AGFW 0
2010-03-03 17:31:35.934: [ default][1] ENV Logging level for Module: CLSFRAME 0
2010-03-03 17:31:35.934: [ default][1] ENV Logging level for Module: CLSVER 0
2010-03-03 17:31:35.934: [ default][1] ENV Logging level for Module: CLUCLS 0
2010-03-03 17:31:35.934: [ default][1] ENV Logging level for Module: COMMCRS 0
2010-03-03 17:31:35.934: [ default][1] ENV Logging level for Module: COMMNS 0
2010-03-03 17:31:35.936: [ default][1] ENV Logging level for Module: CRSAPP 0
2010-03-03 17:31:35.936: [ default][1] ENV Logging level for Module: CRSCCL 0
2010-03-03 17:31:35.936: [ default][1] ENV Logging level for Module: CRSCEVT 0
2010-03-03 17:31:35.936: [ default][1] ENV Logging level for Module: CRSCOMM 1
2010-03-03 17:31:35.936: [    CRSD][1] ENV Debug Level(CRSD): 50
2010-03-03 17:31:35.936: [    CRSD][1] ENV Logging level for Module: CRSD 50
2010-03-03 17:31:35.937: [    CRSD][1] ENV Debug Level(CRSEVT): 0
2010-03-03 17:31:35.937: [    CRSD][1] ENV Logging level for Module: CRSEVT 0
2010-03-03 17:31:35.937: [    CRSD][1] ENV Debug Level(CRSMAIN): 1
2010-03-03 17:31:35.937: [    CRSD][1] ENV Logging level for Module: CRSMAIN 1
2010-03-03 17:31:35.937: [    CRSD][1] ENV Debug Level(CRSOCR): 0
2010-03-03 17:31:35.937: [    CRSD][1] ENV Logging level for Module: CRSOCR 0
2010-03-03 17:31:35.939: [    CRSD][1] ENV Debug Level(CRSPE): 0
2010-03-03 17:31:35.939: [    CRSD][1] ENV Logging level for Module: CRSPE 0
2010-03-03 17:31:35.939: [    CRSD][1] ENV Debug Level(CRSPLACE): 0
2010-03-03 17:31:35.939: [    CRSD][1] ENV Logging level for Module: CRSPLACE 0
2010-03-03 17:31:35.940: [    CRSD][1] ENV Debug Level(CRSRES): 0
2010-03-03 17:31:35.940: [    CRSD][1] ENV Logging level for Module: CRSRES 0
2010-03-03 17:31:35.940: [    CRSD][1] ENV Debug Level(CRSRPT): 0
2010-03-03 17:31:35.940: [    CRSD][1] ENV Logging level for Module: CRSRPT 0
2010-03-03 17:31:35.940: [    CRSD][1] ENV Debug Level(CRSRTI): 0
2010-03-03 17:31:35.940: [    CRSD][1] ENV Logging level for Module: CRSRTI 0
2010-03-03 17:31:35.940: [    CRSD][1] ENV Debug Level(CRSSE): 0
2010-03-03 17:31:35.941: [    CRSD][1] ENV Logging level for Module: CRSSE 0
2010-03-03 17:31:35.941: [    CRSD][1] ENV Debug Level(CRSSEC): 0
2010-03-03 17:31:35.941: [    CRSD][1] ENV Logging level for Module: CRSSEC 0
2010-03-03 17:31:35.941: [    CRSD][1] ENV Debug Level(CRSSHARED): 0
2010-03-03 17:31:35.941: [    CRSD][1] ENV Logging level for Module: CRSSHARED 0
2010-03-03 17:31:35.942: [    CRSD][1] ENV Debug Level(CRSTIMER): 0
2010-03-03 17:31:35.942: [    CRSD][1] ENV Logging level for Module: CRSTIMER 0
2010-03-03 17:31:35.942: [    CRSD][1] ENV Debug Level(CRSUI): 0
2010-03-03 17:31:35.942: [    CRSD][1] ENV Logging level for Module: CRSUI 0
2010-03-03 17:31:35.942: [    CRSD][1] ENV Debug Level(CSSCLNT): 0
2010-03-03 17:31:35.942: [    CRSD][1] ENV Logging level for Module: CSSCLNT 0
2010-03-03 17:31:35.942: [    CRSD][1] ENV Debug Level(OCRAPI): 1
2010-03-03 17:31:35.942: [    CRSD][1] ENV Logging level for Module: OCRAPI 1
2010-03-03 17:31:35.942: [    CRSD][1] ENV Debug Level(OCRASM): 1
2010-03-03 17:31:35.943: [    CRSD][1] ENV Logging level for Module: OCRASM 1
2010-03-03 17:31:35.943: [    CRSD][1] ENV Debug Level(OCRCAC): 1
2010-03-03 17:31:35.943: [    CRSD][1] ENV Logging level for Module: OCRCAC 1
2010-03-03 17:31:35.943: [    CRSD][1] ENV Debug Level(OCRCLI): 1
2010-03-03 17:31:35.943: [    CRSD][1] ENV Logging level for Module: OCRCLI 1
2010-03-03 17:31:35.943: [    CRSD][1] ENV Debug Level(OCRMAS): 1
2010-03-03 17:31:35.943: [    CRSD][1] ENV Logging level for Module: OCRMAS 1
2010-03-03 17:31:35.944: [    CRSD][1] ENV Debug Level(OCRMSG): 1
2010-03-03 17:31:35.944: [    CRSD][1] ENV Logging level for Module: OCRMSG 1
2010-03-03 17:31:35.945: [    CRSD][1] ENV Debug Level(OCROSD): 1
2010-03-03 17:31:35.945: [    CRSD][1] ENV Logging level for Module: OCROSD 1
2010-03-03 17:31:35.945: [    CRSD][1] ENV Debug Level(OCRRAW): 1
2010-03-03 17:31:35.945: [    CRSD][1] ENV Logging level for Module: OCRRAW 1
2010-03-03 17:31:35.945: [    CRSD][1] ENV Debug Level(OCRSRV): 1
2010-03-03 17:31:35.945: [    CRSD][1] ENV Logging level for Module: OCRSRV 1
2010-03-03 17:31:35.945: [    CRSD][1] ENV Debug Level(OCRUTL): 1
2010-03-03 17:31:35.945: [    CRSD][1] ENV Logging level for Module: OCRUTL 1
2010-03-03 17:31:35.945: [    CRSD][1] ENV Debug Level(SuiteTes): 1
2010-03-03 17:31:35.946: [    CRSD][1] ENV Logging level for Module: SuiteTes 1
2010-03-03 17:31:35.946: [    CRSD][1] ENV Debug Level(UiServer): 0
2010-03-03 17:31:35.946: [    CRSD][1] ENV Logging level for Module: UiServer 0
2010-03-03 17:31:35.946: [ CRSMAIN][1] Checking the OCR device
2010-03-03 17:31:35.948: [ CRSMAIN][1] Connecting to the CSS Daemon
2010-03-03 17:31:35.976: [ CRSMAIN][1] Initializing OCR
2010-03-03 17:31:35.981: [ OCRAPI][1]clsu_get_private_ip_addr: Calling clsu_get_private_ip_addresses to get first private ip
2010-03-03 17:31:35.981: [ OCRAPI][1]Check namebufs
2010-03-03 17:31:35.981: [ OCRAPI][1]Finished checking namebufs
2010-03-03 17:31:35.982: [    GIPC][1] gipcCheckInitialization: possible incompatible non-threaded init from [clsinet.c : 3232
], original from [clsss.c : 5026]
2010-03-03 17:31:36.036: [    GPnP][1]clsgpnp_Init: [at clsgpnp0.c:405] gpnp tracelevel 3, component tracelevel 0
2010-03-03 17:31:36.037: [    GPnP][1]clsgpnp_Init: [at clsgpnp0.c:535] '/u01/grid/11.2.0' in effect as GPnP home base.
2010-03-03 17:31:36.059: [    GIPC][1] gipcCheckInitialization: possible incompatible non-threaded init from [clsgpnp0.c : 680
], original from [clsss.c : 5026]
2010-03-03 17:31:36.067: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3867] Init gpnp local security key providers (2)
fatal if both fail
2010-03-03 17:31:36.068: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3870] Init gpnp local security key proveders 1 o
f 2: file wallet (LSKP-FSW)
2010-03-03 17:31:36.068: [    GPnP][1]clsgpnpkwf_initwfloc: [at clsgpnpkwf.c:398] Using FS Wallet Location : /u01/grid/11.2.0/
gpnp/mskbkp2/wallets/peer/
2010-03-03 17:31:36.069: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3892] Init gpnp local security key provider 1 of
2: file wallet (LSKP-FSW) OK
2010-03-03 17:31:36.069: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3898] Init gpnp local security key proveders 2 o
f 2: OLR wallet (LSKP-CLSW-OLR)
[   CLWAL][1]clsw_Initialize: OLR initlevel [30000]
2010-03-03 17:31:36.080: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3921] Init gpnp local security key provider 2 of
2: OLR wallet (LSKP-CLSW-OLR) OK
2010-03-03 17:31:36.081: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1952] <Get gpnp security keys (wallet) for id:1,typ;7. (2
providers - fatal if all fail)
2010-03-03 17:31:36.081: [    GPnP][1]clsgpnpkwf_getWalletPath: [at clsgpnpkwf.c:501] req_id=1 ck_prov_id=1 wallet path: /u01/
grid/11.2.0/gpnp/mskbkp2/wallets/peer/
2010-03-03 17:31:36.152: [    GPnP][1]clsgpnpwu_walletfopen: [at clsgpnpwu.c:496] Opened SSO wallet: '/u01/grid/11.2.0/gpnp/ms
kbkp2/wallets/peer/cwallet.sso'
2010-03-03 17:31:36.152: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1968] Result: (0) CLSGPNP_OK. Get gpnp wallet - provider 1
of 2 (LSKP-FSW(1))
2010-03-03 17:31:36.152: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1982] Got gpnp security keys (wallet).>
2010-03-03 17:31:36.172: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1952] <Get gpnp security keys (wallet) for id:1,typ;4. (2
providers - fatal if all fail)
2010-03-03 17:31:36.172: [    GPnP][1]clsgpnpkwf_getWalletPath: [at clsgpnpkwf.c:501] req_id=1 ck_prov_id=1 wallet path: /u01/
grid/11.2.0/gpnp/mskbkp2/wallets/peer/
2010-03-03 17:31:36.238: [    GPnP][1]clsgpnpwu_walletfopen: [at clsgpnpwu.c:496] Opened SSO wallet: '/u01/grid/11.2.0/gpnp/ms
kbkp2/wallets/peer/cwallet.sso'
2010-03-03 17:31:36.239: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1968] Result: (0) CLSGPNP_OK. Get gpnp wallet - provider 1
of 2 (LSKP-FSW(1))
2010-03-03 17:31:36.239: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1982] Got gpnp security keys (wallet).>
2010-03-03 17:31:36.239: [    GPnP][1]clsgpnp_Init: [at clsgpnp0.c:840] GPnP client pid=18669, tl=3, f=0
2010-03-03 17:31:36.541: [GIPCXCPT][1] gipcShutdownF: skipping shutdown, count 2, from [ clsinet.c : 1735], ret gipcretSuccess
(0)
2010-03-03 17:31:36.552: [GIPCXCPT][1] gipcShutdownF: skipping shutdown, count 1, from [ clsgpnp0.c : 1021], ret gipcretSucces
s (0)
2010-03-03 17:31:36.771: [ OCRRAW][1]proprioo: for disk 0 (+DR2_BIN), id match (1), total id sets, (1) need recover (0), my v
otes (0), total votes (0), commit_lsn (9), lsn (9)
2010-03-03 17:31:36.771: [ OCRRAW][1]proprioo: my id set: (833490748, 1028247821, 0, 0, 0)
2010-03-03 17:31:36.772: [ OCRRAW][1]proprioo: 1st set: (833490748, 1028247821, 0, 0, 0)
2010-03-03 17:31:36.772: [ OCRRAW][1]proprioo: 2nd set: (0, 0, 0, 0, 0)
2010-03-03 17:31:36.830: [ OCRSRV][1]th_init: Successfully retrieved CSS misscount [31].
2010-03-03 17:31:36.830: [ OCRSRV][1]th_init: Successfully query CLSS mode [3].
[ OCRMAS][20]th_calc_av:5': Rturn persisted AV [186646784] [11.2.0.1.0]
2010-03-03 17:31:36.920: [ OCRSRV][20]th_not_master_change: Master change callback not registered
2010-03-03 17:31:36.920: [ OCRMAS][20]th_master:12: I AM THE NEW OCR MASTER at incar 1. Node Number 2
2010-03-03 17:31:37.134: [ OCRASM][20]proprasmo: ASM cache size is [5MB]
2010-03-03 17:31:37.142: [ OCRASM][20]proprasmo: ASM cache [5MB] enabled for disk group [DR2_BIN].
2010-03-03 17:31:37.155: [ OCRRAW][20]proprioo: for disk 0 (+DR2_BIN), id match (1), total id sets, (1) need recover (0), my
votes (0), total votes (0), commit_lsn (9), lsn (9)
2010-03-03 17:31:37.155: [ OCRRAW][20]proprioo: my id set: (833490748, 1028247821, 0, 0, 0)
2010-03-03 17:31:37.155: [ OCRRAW][20]proprioo: 1st set: (833490748, 1028247821, 0, 0, 0)
2010-03-03 17:31:37.155: [ OCRRAW][20]proprioo: 2nd set: (0, 0, 0, 0, 0)
2010-03-03 17:31:37.214: [ OCRMAS][20]proath_master:18: Spawned connection mgr thread
2010-03-03 17:31:37.214: [ OCRMAS][20]proath_master:20: Spawned upgrade thread
2010-03-03 17:31:37.214: [ OCRMAS][20]th_master:19.1: Wake up upgrade thread
2010-03-03 17:31:37.216: [ OCRSRV][1]th_snap_local_spawn: Inside snap local spawn. host is [mskbkp2]
2010-03-03 17:31:37.219: [ CRSMAIN][1] Running as user: root
2010-03-03 17:31:37.219: [ CRSMAIN][1] CRSD running as the Privileged user
2010-03-03 17:31:37.219: [ CLSVER][1] Static Version 11.2.0.1.0
2010-03-03 17:31:37.226: [ OCRMAS][20]th_master:1': Recvd pubdata event from node [2]
2010-03-03 17:31:37.227: [ OCRMAS][20]th_master:2': Recvd pubdata event for self. Do nothing.
2010-03-03 17:31:37.227: [ CLSVER][1] Daemon version: 11.2.0.1.0 Software version: 11.2.0.1.0
2010-03-03 17:31:37.231: [ CLSVER][1] Active Version from OCR:11.2.0.1.0
2010-03-03 17:31:37.232: [ CLSVER][1] Active Version and Software Version are same
2010-03-03 17:31:37.232: [ CLSVER][1] Active Version changed to 11.2.0.1.0
2010-03-03 17:31:37.232: [ OCRSRV][1]th_reg_master_change: Master change callback registered
2010-03-03 17:31:37.232: [ OCRAPI][1]a_reg_master_change: Registered master change callback
2010-03-03 17:31:37.232: [ OCRSRV][1]th_not_master_change: Invoking master change callback. Master [2] Inc [1]
2010-03-03 17:31:37.232: [ OCRAPI][1]a_reg_master_change: Notified master change
2010-03-03 17:31:37.232: [ CRSMAIN][1] CAA Node Group Pri Data size: 128
2010-03-03 17:31:37.233: [ CRSMAIN][1] CAA Node Group Pub Data size: 128
2010-03-03 17:31:37.247: [ CRSMAIN][1] Getting private data of booted nodes
2010-03-03 17:31:37.247: [ CRSMAIN][1] Checking for booted param on nodenum: 2
2010-03-03 17:31:37.306: [    CLSE][1]clse_get_auth_loc: Returning default authloc: /u01/grid/11.2.0/auth/crs/mskbkp2
2010-03-03 17:31:37.306: [ CRSMAIN][1] Using Authorizer location: /u01/grid/11.2.0/auth/crs/mskbkp2
2010-03-03 17:31:37.314: [ OCRSRV][23]th_upgrade: Starting upgrade calculation
2010-03-03 17:31:37.364: [ CLSCLU][1]clsclu_init: rc 0
2010-03-03 17:31:37.381: [ OCRSRV][23]th_upgrade:10.1 AV [186646784]. State [11]. Already upgraded.Updated global data to the
crs version group. Return [0]
2010-03-03 17:31:37.385: [ CRSMAIN][1] Initializing RTI
2010-03-03 17:31:37.433: [ CRSMAIN][1] Initializing ResouceStateListener
2010-03-03 17:31:37.433: [CRSTIMER][37] Timer Thread Starting.
2010-03-03 17:31:37.433: [ CRSMAIN][1] Initializing EVMMgr
2010-03-03 17:31:37.446: [ CRSMAIN][1] Initializing ResourceMap Map
2010-03-03 17:31:37.461: [ CRSMAIN][1] Subscribing to EVM events for apps
2010-03-03 17:31:37.504: [ CRSMAIN][1] CRSD locked during state recovery, please wait.
2010-03-03 17:31:37.516: [ CRSMAIN][1] CRSD recovered, unlocked.
2010-03-03 17:31:37.525: [ default][1]clsu_get_private_ip_addr: Calling clsu_get_private_ip_addresses to get first private ip
2010-03-03 17:31:37.525: [ default][1]Check namebufs
2010-03-03 17:31:37.525: [ default][1]Finished checking namebufs
2010-03-03 17:31:37.526: [    GIPC][1] gipcCheckInitialization: possible incompatible non-threaded init from [clsinet.c : 3232
], original from [clsss.c : 5026]
2010-03-03 17:31:37.569: [    GPnP][1]clsgpnp_Init: [at clsgpnp0.c:405] gpnp tracelevel 3, component tracelevel 0
2010-03-03 17:31:37.569: [    GPnP][1]clsgpnp_Init: [at clsgpnp0.c:535] '/u01/grid/11.2.0' in effect as GPnP home base.
2010-03-03 17:31:37.587: [    GIPC][1] gipcCheckInitialization: possible incompatible non-threaded init from [clsgpnp0.c : 680
], original from [clsss.c : 5026]
2010-03-03 17:31:37.595: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3867] Init gpnp local security key providers (2)
fatal if both fail
2010-03-03 17:31:37.595: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3870] Init gpnp local security key proveders 1 o
f 2: file wallet (LSKP-FSW)
2010-03-03 17:31:37.596: [    GPnP][1]clsgpnpkwf_initwfloc: [at clsgpnpkwf.c:398] Using FS Wallet Location : /u01/grid/11.2.0/
gpnp/mskbkp2/wallets/peer/
2010-03-03 17:31:37.596: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3892] Init gpnp local security key provider 1 of
2: file wallet (LSKP-FSW) OK
2010-03-03 17:31:37.596: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3898] Init gpnp local security key proveders 2 o
f 2: OLR wallet (LSKP-CLSW-OLR)
[   CLWAL][1]clsw_Initialize: OLR initlevel [30000]
2010-03-03 17:31:37.607: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3921] Init gpnp local security key provider 2 of
2: OLR wallet (LSKP-CLSW-OLR) OK
2010-03-03 17:31:37.607: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1952] <Get gpnp security keys (wallet) for id:1,typ;7. (2
providers - fatal if all fail)
2010-03-03 17:31:37.607: [    GPnP][1]clsgpnpkwf_getWalletPath: [at clsgpnpkwf.c:501] req_id=1 ck_prov_id=1 wallet path: /u01/
grid/11.2.0/gpnp/mskbkp2/wallets/peer/
2010-03-03 17:31:37.673: [    GPnP][1]clsgpnpwu_walletfopen: [at clsgpnpwu.c:496] Opened SSO wallet: '/u01/grid/11.2.0/gpnp/ms
kbkp2/wallets/peer/cwallet.sso'
2010-03-03 17:31:37.673: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1968] Result: (0) CLSGPNP_OK. Get gpnp wallet - provider 1
of 2 (LSKP-FSW(1))
2010-03-03 17:31:37.673: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1982] Got gpnp security keys (wallet).>
2010-03-03 17:31:37.690: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1952] <Get gpnp security keys (wallet) for id:1,typ;4. (2
providers - fatal if all fail)
2010-03-03 17:31:37.690: [    GPnP][1]clsgpnpkwf_getWalletPath: [at clsgpnpkwf.c:501] req_id=1 ck_prov_id=1 wallet path: /u01/
grid/11.2.0/gpnp/mskbkp2/wallets/peer/
2010-03-03 17:31:37.754: [    GPnP][1]clsgpnpwu_walletfopen: [at clsgpnpwu.c:496] Opened SSO wallet: '/u01/grid/11.2.0/gpnp/ms
kbkp2/wallets/peer/cwallet.sso'
2010-03-03 17:31:37.754: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1968] Result: (0) CLSGPNP_OK. Get gpnp wallet - provider 1
of 2 (LSKP-FSW(1))
2010-03-03 17:31:37.754: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1982] Got gpnp security keys (wallet).>
2010-03-03 17:31:37.755: [    GPnP][1]clsgpnp_Init: [at clsgpnp0.c:840] GPnP client pid=18669, tl=3, f=0
2010-03-03 17:31:37.806: [GIPCXCPT][1] gipcShutdownF: skipping shutdown, count 2, from [ clsinet.c : 1735], ret gipcretSuccess
(0)
2010-03-03 17:31:37.817: [GIPCXCPT][1] gipcShutdownF: skipping shutdown, count 1, from [ clsgpnp0.c : 1021], ret gipcretSucces
s (0)
2010-03-03 17:31:37.822: [ CRSMAIN][1] CRSD listening on 10 style E2E port (ADDRESS=(PROTOCOL=tcp)(HOST=172.31.25.112)(PORT=38
983))
2010-03-03 17:31:37.835: [ CRSMAIN][1] Starting Threads
2010-03-03 17:31:37.858: [    CLSE][1]clse_get_auth_loc: Returning default authloc: /u01/grid/11.2.0/auth/crs/mskbkp2
2010-03-03 17:31:37.858: [    CRSD][1] AuthLoc /u01/grid/11.2.0/auth/crs/mskbkp2
2010-03-03 17:31:37.859: [    CRSD][1] PE active version: 11.2.0.1.0
2010-03-03 17:31:37.859: [    CRSD][1] PE Engine: NEW
2010-03-03 17:31:37.859: [    CRSD][1] Using OCR batch ops : ENABLED
2010-03-03 17:31:37.860: [ CRSMAIN][1] Initializing Node Down Monitor
2010-03-03 17:31:37.860: [ CRSMAIN][1] CRS Daemon Started.
2010-03-03 17:31:37.860: [    CRSD][1] Connecting to the CSS Daemon
2010-03-03 17:31:37.861: [    CRSD][1] Local CSS Node Number is: 2
2010-03-03 17:31:37.863: [    CRSD][1] Local Css Node Name is: mskbkp2
2010-03-03 17:31:37.863: [    CRSD][1] CRSDPersonality initialized
2010-03-03 17:31:37.864: [ CRSMAIN][1] Process member data: CRSD:mskbkp2
2010-03-03 17:31:37.864: [    CRSD][1][F-ALGO] getIpcPath returning (ADDRESS=(PROTOCOL=IPC)(KEY=CRSD_IPC_SOCKET_11))
2010-03-03 17:31:37.865: [CLSFRAME][1] Inited lsf context 102b3f670
2010-03-03 17:31:37.865: [CLSFRAME][1] Initing CLS Framework messaging
2010-03-03 17:31:37.869: [    CRSD][1][F-ALGO] getIpcPath returning (ADDRESS=(PROTOCOL=IPC)(KEY=CRSD_IPC_SOCKET_11))
2010-03-03 17:31:37.873: [UiServer][1] UI Comms initalize() 1
2010-03-03 17:31:37.873: [CLSFRAME][1] New Framework state: 2
2010-03-03 17:31:37.873: [CLSFRAME][1] M2M is starting...
2010-03-03 17:31:37.873: [ CRSCCL][1]clsCclInit called by process: 18669
2010-03-03 17:31:37.885: [ CRSCCL][1]USING CLSC ============
2010-03-03 17:31:37.895: [ default][1]clsu_get_private_ip_addr: Calling clsu_get_private_ip_addresses to get first private ip
2010-03-03 17:31:37.895: [ default][1]Check namebufs
2010-03-03 17:31:37.895: [ default][1]Finished checking namebufs
2010-03-03 17:31:37.950: [    GPnP][1]clsgpnp_Init: [at clsgpnp0.c:405] gpnp tracelevel 3, component tracelevel 0
2010-03-03 17:31:37.951: [    GPnP][1]clsgpnp_Init: [at clsgpnp0.c:535] '/u01/grid/11.2.0' in effect as GPnP home base.
2010-03-03 17:31:37.970: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3867] Init gpnp local security key providers (2)
fatal if both fail
2010-03-03 17:31:37.970: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3870] Init gpnp local security key proveders 1 o
f 2: file wallet (LSKP-FSW)
2010-03-03 17:31:37.970: [    GPnP][1]clsgpnpkwf_initwfloc: [at clsgpnpkwf.c:398] Using FS Wallet Location : /u01/grid/11.2.0/
gpnp/mskbkp2/wallets/peer/
2010-03-03 17:31:37.970: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3892] Init gpnp local security key provider 1 of
2: file wallet (LSKP-FSW) OK
2010-03-03 17:31:37.970: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3898] Init gpnp local security key proveders 2 o
f 2: OLR wallet (LSKP-CLSW-OLR)
[   CLWAL][1]clsw_Initialize: OLR initlevel [70000]
2010-03-03 17:31:37.980: [    GPnP][1]clsgpnp_InitCKProviders: [at clsgpnp0.c:3921] Init gpnp local security key provider 2 of
2: OLR wallet (LSKP-CLSW-OLR) OK
2010-03-03 17:31:37.980: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1952] <Get gpnp security keys (wallet) for id:1,typ;7. (2
providers - fatal if all fail)
2010-03-03 17:31:37.980: [    GPnP][1]clsgpnpkwf_getWalletPath: [at clsgpnpkwf.c:501] req_id=1 ck_prov_id=1 wallet path: /u01/
grid/11.2.0/gpnp/mskbkp2/wallets/peer/
2010-03-03 17:31:38.049: [    GPnP][1]clsgpnpwu_walletfopen: [at clsgpnpwu.c:496] Opened SSO wallet: '/u01/grid/11.2.0/gpnp/ms
kbkp2/wallets/peer/cwallet.sso'
2010-03-03 17:31:38.049: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1968] Result: (0) CLSGPNP_OK. Get gpnp wallet - provider 1
of 2 (LSKP-FSW(1))
2010-03-03 17:31:38.049: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1982] Got gpnp security keys (wallet).>
2010-03-03 17:31:38.068: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1952] <Get gpnp security keys (wallet) for id:1,typ;4. (2
providers - fatal if all fail)
2010-03-03 17:31:38.068: [    GPnP][1]clsgpnpkwf_getWalletPath: [at clsgpnpkwf.c:501] req_id=1 ck_prov_id=1 wallet path: /u01/
grid/11.2.0/gpnp/mskbkp2/wallets/peer/
2010-03-03 17:31:38.134: [    GPnP][1]clsgpnpwu_walletfopen: [at clsgpnpwu.c:496] Opened SSO wallet: '/u01/grid/11.2.0/gpnp/ms
kbkp2/wallets/peer/cwallet.sso'
2010-03-03 17:31:38.135: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1968] Result: (0) CLSGPNP_OK. Get gpnp wallet - provider 1
of 2 (LSKP-FSW(1))
2010-03-03 17:31:38.135: [    GPnP][1]clsgpnp_getCK: [at clsgpnp0.c:1982] Got gpnp security keys (wallet).>
2010-03-03 17:31:38.135: [    GPnP][1]clsgpnp_Init: [at clsgpnp0.c:840] GPnP client pid=18669, tl=3, f=3
2010-03-03 17:31:38.184: [GIPCXCPT][1] gipcShutdownF: skipping shutdown, count 2, from [ clsinet.c : 1735], ret gipcretSuccess
(0)
2010-03-03 17:31:38.194: [GIPCXCPT][1] gipcShutdownF: skipping shutdown, count 1, from [ clsgpnp0.c : 1021], ret gipcretSucces
s (0)
2010-03-03 17:31:38.200: [ CRSCCL][1]Listening endpoint created sucessfully @ (ADDRESS=(PROTOCOL=tcp)(DEV=54)(HOST=172.31.25.
112)(PORT=38984)).con = 10359a0d0
2010-03-03 17:31:38.209: [ CRSCCL][48]CSS Group Registration complete.
2010-03-03 17:31:38.213: [ CRSCCL][48]cclGetMemberData called
2010-03-03 17:31:38.215: [ CRSCCL][48]Obtained first membership map.
2010-03-03 17:31:38.215: [ CRSCCL][48]Dumping member data ------------------
2010-03-03 17:31:38.215: [ CRSCCL][48]Member (2, 603412550) on node port=.
2010-03-03 17:31:38.216: [ CRSCCL][48]Done ------------------
2010-03-03 17:31:38.216: [ CRSCCL][48]Waiting for reconfigs
2010-03-03 17:31:38.216: [ CRSCCL][49]cclCommunicationHandler started.
2010-03-03 17:31:38.220: [ CRSCOMM][1] Ipc: m_pClscCtx=1020c4850m_pUgblm=1035b2a50
2010-03-03 17:31:38.220: [ CRSCOMM][1] Ipc: Starting send thread
2010-03-03 17:31:38.220: [ CRSCOMM][1] IpcL: Listener instantiated for: (ADDRESS=(PROTOCOL=IPC)(KEY=CRSD_IPC_SOCKET_11))
2010-03-03 17:31:38.221: [ CRSCOMM][52] Ipc: sendWork thread started.
2010-03-03 17:31:38.222: [ CRSCOMM][1] IpcL: Listener started listening.
2010-03-03 17:31:38.223: [ CRSCOMM][53] IpcL: thread started listening
2010-03-03 17:31:38.223: [CLSFRAME][1] Starting thread model named: AgfwProxySrvTM
2010-03-03 17:31:38.224: [CLSFRAME][1] Starting thread model named: OcrModuleTM
2010-03-03 17:31:38.225: [CLSFRAME][1] Starting thread model named: PolicyEngineTM
2010-03-03 17:31:38.225: [CLSFRAME][1] Starting thread model named: SharedThreadTM
2010-03-03 17:31:38.225: [CLSFRAME][1] Starting thread model named: UiServerTM
2010-03-03 17:31:38.225: [CLSFRAME][1] New Framework state: 3
2010-03-03 17:31:38.227: [ CRSRPT][62] Enabled
2010-03-03 17:31:38.228: [   CRSPE][61] PE Role|State Update: old role [INVALID] new [INVALID]; old state [Not yet initialized
] new [Enabling: waiting for role]
2010-03-03 17:31:38.229: [   CRSSE][62] Master Change Event; New Master Node ID:2 This Node's ID:2
2010-03-03 17:31:38.230: [   CRSPE][61] PE Role|State Update: old role [INVALID] new [MASTER]; old state [Enabling: waiting fo
r role] new [Configuring]
2010-03-03 17:31:38.230: [   CRSPE][61] PE MASTER NAME: mskbkp2
2010-03-03 17:31:38.230: [   CRSPE][61] Starting to read configuration
2010-03-03 17:31:38.260: [   CRSPE][61] Reading (2) servers
2010-03-03 17:31:38.459: [   CRSPE][61] DM: set global config version to: 150
2010-03-03 17:31:38.459: [   CRSPE][61] DM: set pool freeze timeout to: 60000
2010-03-03 17:31:38.459: [   CRSPE][61] DM: Set event seq number to: 13900000
2010-03-03 17:31:38.459: [   CRSPE][61] DM: Set threshold event seq number to: 13980000
2010-03-03 17:31:38.460: [   CRSPE][61] Sent request to write event sequence number 14000000 to repository
2010-03-03 17:31:38.483: [   CRSPE][61] Wrote new event sequence to repository
2010-03-03 17:31:38.568: [   CRSPE][61] Reading (15) types
2010-03-03 17:31:38.593: [   CRSPE][61] Reading (3) server pools
2010-03-03 17:31:38.624: [   CRSPE][61] Reading (21) resources
2010-03-03 17:31:39.987: [   CRSPE][61] Finished reading configuration. Parsing...
2010-03-03 17:31:39.988: [   CRSPE][61] Parsing resource types...
2010-03-03 17:31:40.030: [    CRSD][61] Initializing the config version for type ora.asm.type to: 1
2010-03-03 17:31:40.035: [    CRSD][61] Initializing the config version for type ora.cluster_resource.type to: 1
2010-03-03 17:31:40.040: [    CRSD][61] Initializing the config version for type ora.cluster_vip.type to: 1
2010-03-03 17:31:40.044: [    CRSD][61] Initializing the config version for type ora.cluster_vip_net1.type to: 1
2010-03-03 17:31:40.048: [    CRSD][61] Dump State Starting ...
2010-03-03 17:31:40.048: [    CRSD][61] State Dump for RTILock
2010-03-03 17:31:40.048: [    CRSD][61] Lock State List is busy, skipping ..
2010-03-03 17:31:40.048: [    CRSD][61] State Dump for Timer
2010-03-03 17:31:40.049: [    CRSD][61] Timer map size=0
2010-03-03 17:31:40.049: [   CRSPE][61] Dumping PE Data Model...:DM has [0 resources][0 types][0 servers][0 spools]
------------- RESOURCES:
------------- TYPES:
------------- SERVERS:
------------- SERVER POOLS:
2010-03-03 17:31:40.049: [   CRSPE][61] Dumping ICE contents...:ICE operation count: 0
2010-03-03 17:31:40.049: [    CRSD][61] Dump State Done.
I guess that there is some thing wrong in configuration, but cannot find out what.
Any help would be appreciated.
Thanks

Hi,
Please check your disk attributes and permission of OCR/Voting and other ASM devices. The disk attribute should be changed to be shared among all nodes of cluster. It happened with us in 10.2.0.4 where disk was not shared and we were able to start crs from only one node at a time so please check disk attributes. Please see blog keyurmakwanacrs.blogspot.com for AIX which we faced. Not surle whether you've similar problem or not. We had 10.2.0.4 clusterware.
thanks,
Keyur

ABAP dump during workstatus chaning in SAP BPC 7.5

Hi, Experts
We are working with SAP BPC 7.5 Ramp-up version. We faced a problem - during changing workstatus the system generates ABAP Dump.
We checked ST22 with ABAP Dumps. It contains the following:
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_UJW_WORK_STATUS_DAO========CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
ABAP errors are created in the following code:
FIELD-SYMBOLS:
        <fs_line> TYPE ANY.
CREATE DATA lr_line TYPE (i_tabname).
ASSIGN lr_line->* to <fs_line>.
l_where = 'APPSET = i_appset'. "#EC NOTEXT
LOOP AT it_dim_mem INTO ls_dim_mem.
    CONCATENATE
      l_where ' AND ' ls_dim_mem-dimension ' = ''' ls_dim_mem-member ''''
      INTO l_where RESPECTING BLANKS.
ENDLOOP.
*SELECT SINGLE * INTO CORRESPONDING FIELDS OF es_lock_info FROM (i_tabname) WHERE (l_where).*
* fill lock information
CLEAR ls_ujw_statcode.
CALL METHOD me->read_status_code(
               EXPORTING i_appset = i_appset
                         i_status = es_lock_info-status
                         i_spras = 'E'
               IMPORTING es_ujw_statcode = ls_ujw_statcode ).
ABAP dump says that in "SELECT SINGLE * INTO CORRESPONDING FIELDS OF es_lock_info FROM (i_tabname) WHERE (l_where).*" exist a dynamically specified column name which is unknown.
Does somebody have the same problems?
Regards,
Pavel

Hi Pavel,
This is obviously a bug and it looks like from the code block you copied into the forum that there is an issue with the actual select statements dynamic where clause. I haven't specifically seen this bug but I recommend you do an SAP Note search on the following component EPM-BPC-NW-WS (for work status) in your search criteria put the class name that you found in the dump. This should help you find whether or not a correction has been created (i.e. an SAP note) that solves your issue.
Cheers, Scott

RPCIPE00 - Dump during import_from_table

Similar Messages

Maybe you are looking for