RRAS 2012 With DHCP Works, Cannot Get Static Address Pool To Connect Completely
Hello Forums Users:
I have set up RRAS/DA 2012 successfully incorporating my AD DHCP server. Every connection works and I see all networks that I have VPN tunnels set up with, which is totally cool. However, I want to assign remote VPN users IP's from a
static address pool - and while the setup completes without issue and the client connects, I can see absolutely nothing. No good pings, no connect to Lync client, Outlook, etc. etc.
I am OBVIOUSLY missing something but have no idea what that is. Do I need to add something (and I really have no idea what that "something" is) to RRAS config so the static address pool (192.168.40.0 in this case) has the same access as
the AD DHCP pool does?
Thanks again for taking the time to check this out and comment.
Bill:
Thanks for the reply.... yes, the idea is to free up a pool of IP's large enough to accomodate all 170 staff. Our current 192.168.2.x DHCP hands out 150, but I need to plan for DR/BCP when other locations (about 110 users) remote in when their
location goes dark.
I already have VPN tunnels between the main locations and a VPN user can see ALL of them when it gets an IP from DHCP. Are you saying that I have to add routes to all the routers/firewalls to accomplish this?
Or would I use IPv4 Static Routes? A network I'd like access to is 192.168.14.0 /24. Would the route look like any of these? Sorry it's not clear what I would use as the gateway (192.168.2.1 is the RRAS server network gateway, 192.168.2.6
is RRAS IP)
Destination Net Mask Gateway Interface
192.168.14.0 255.255.255.0 192.168.2.1 LAN
192.168.14.0 255.255.255.0
192.168.14.254 LAN (
(.254 is the remote gateway)
Similar Messages
-
Networking issue with new Macbook - cannot get IP address from DHCP router
Hello all, I've seen this problem posted a few times and been having the same problem with my new aluminum MacBook. Here's the story:
When connecting to my network at home, I get the message "Airport has a self-assigned IP and may not be able to connect to the internet." I've been able to connect a few times, but anytime it sleeps or I shut down I have the same problem. When I'm out and about, it has no problem connecting to other networks.
On the network in which I cannot connect, there are 2 other macs and two PCs that do NOT have any problem connecting. Macs are all running 10.5.5.
Router in a 2Wire and uses DHCP. ISP is AT&T.
I've tried rebooting the router, manually assigned an IP address, restarting, updating software. Nothing seems to work.
Does anyone have any other suggestions? This is kinda making me crazy.I've also tried:
1) Creating a new location in network prefs.
2) Zapping PRAM
3) rebooting router many time.
4) putting a $ in front of the hex password
5) deleting all of the plists that I've seen recommended.
6) Starting in safe mode
7) Renewing IP
8) Shutting off firewall -
RRAS 2012 - Cannot Change IPV4 From DHCP -- Static Address Pool
Have set up RRAS/DA 2012 and it works but I need to change from using our DHCP server to a static address pool. However, when I go to RRAS server properties & IPv4 tab the section to opt for DHCP/Static is dimmed out.
Any suggestions to get around this annoyance so I can use static address pools for remote users?
Thanks as always!Hi,
Please try to use the following PowerSHell command and see how it works.
Set-VpnIPAddressAssignment -IPAssignmentMethod ‘StaticPool’
Set-VpnIPAddressAssignment
http://technet.microsoft.com/en-us/library/hh918431.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support -
gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?
paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.
-
I need help with fp, i cannot get it to work. have tried everything
i cannot get fp to work. I have uninstalled and installed so many times. I use IE9....it worked two months ago.
thank you for your reply. I am using Internet Exp. 9 and McAfee software. It states it installs and when I open a video, receive message I need to upgrade. I followed the directions for 32 bit vs 64 bit. Adobe FP is under my programs????
> Date: Thu, 8 Sep 2011 05:17:21 -0600
From: [email protected]
To: [email protected]
Subject: I need help with fp, i cannot get it to work. have tried everything
It won't work or just won't install?
Which OS, browser(s), and anti-virus software are you using?
If you're using the free Avira AntiVir(us) Personal software, then deactive the Webguard feature first before installing the Flash Player.
> -
Everything I own (iPad, iPhone, mac) is set up on wi-fi. when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!
Windows drivers for Intel wireless cards are known problematic.. If you have plenty of signal and it still cannot keep or hold the connection the issue can simply be the type of wireless.
Another problem is using names that windows does not easily handle.
eg If you set the TC using apple names, like
Fred Blog's Airport Time Capsule wireless24ad12
Then to windows this is too long.. it has spaces and it has illegal character.
Change all names on the TC to suit windows. Short, no spaces and pure alphanumeric.
Also security must be suitable.. I have no idea how old or what OS your dell is, but if you still have issues.. pull off the security on the TC for a test.. if the computer suddenly works, it is not compatible with WPA2 AES. Make sure you also use a password that is mix upper and lower case plus numbers.. avoid special characters and make it 10-20 characters long say.. it is not required to be more than that unless you are paranoid. -
I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV
Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT -
I cannot get my iPhone 4S to connect to iMessage n FaceTime have tried all the tips online and it's still not working ? It's just saying waiting for activation
What tips have you tried so far? Just so we don't waste our time telling you things you've already done.
When you respond, also indicate which country and carrier you're using. Also, is your phone brand new? can you make a phone call / access the internet while on cellular? -
I cannot get my iPhone 5c to connect with my tomtom 600
I cannot get my iPhone 5c to connect with my tomtom go 600
Did you find this page?
https://www.tomtom.com/en_gb/services/connect/#tab:tab2 -
I cannot get my address book to merge with iCloud?
I cannot get my address book to merge with iCloud?
Yes, the settings all appear to be correct on the Info page in Itunes. I have contacts checked to synch, calendars and mail accounts but only the contacts are not moving to the Iphone.
-
Cannot buy music or apps with itunes card keep getting invalid address massage
cannot buy music or update apps. with itunes card keep getting invalid address massage
I also saw on another thread where it said the problem was in the address line. I have been using the same address and credit card info for years. I added an "e" to avenue. Previously I had Av. I fixed the problem after trying a dozen different things, unit, apt.ex....
-
Whenever i open iTunes it tells me that 2 of my downloads cannot be completed because the file may be corrupted. I cannot get rid of this message or complete the downloads. Other downloads worked. What can i do to get rid of this warning message or complete the downloads?
Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer. -
With ios8.1 cannot get new gmail or use Safari?
with ios8.1 cannot get new gmail or use Safari?
Hello anderson113,
It may help to force close the affected apps, then restart your iPhone.
Force an app to close in iOS
http://support.apple.com/en-us/HT5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/en-us/HT1430
If you're still experiencing issues, the next step would be to restore the device.
Back up and restore your iPhone, iPad, or iPod touch with iCloud or iTunes
http://support.apple.com/en-us/HT1766
Cheers,
Allen -
I cannot get my iphone 5c to connect to any Bluetooth device. I know the speaker I am trying to connect to is ok because my ipad will connect to it.
Try disconnecting your iPad bluetooth connection and reinitializing the 5c. This would sometimes get me frustrated with my BT keyboard.
-
Cannot get my iphone 4 to connect via bluetooth to another phone or my pc
I cannot get my iphone 4 to connect via bluetooth to another phone or my PC, despite activating bluetooth on the iphone it just says 'devices' 'searching' 'now discoverable'. I have put the 2 devices very close to each other as well.
Anybody have any ideas?
ThanksThat's because it's not supported. The iPhone supports hands free devices, keyboards and A2DP audio streaming. Bluetooth can only be used to a computer for tethering. Some apps can establish peer to peer connections for gaming and data sharing, but that's it.
What you're trying to do will NOT work.
Maybe you are looking for
-
Some of the birthdays I have entered in Address book appear in my Ical one day and one year earlier than the date I have given. Eg. I have entered a birthday in Address book as 23 March 2011 and it appears in Ical as being on 22 March 2010. Other nam
-
Why does time machine back up change root directory of software?
about a year ago i did a time machine back up of my old macbook pro, then when i came to use a piece of software (native instruments-traktor) it said the root directory had been changed and it couldnt find the file. i had to remove the whole program
-
Adobe Acrobat X Version 10.1.0 Edit Document Text tool not working
Hi Adobe People I am suing Adobe Acrobat X Version 10.1.0. I have a document open and I would like to delete a sentence. So I click on tools and navigate to Edit Document Text. I highlight the sentence I would like to delete. I press delete and nothi
-
Dear All, I have 3 signature fields on a form that I have just completed. Each of this signature locks each section of the form, but whenever one of this signatures are signed, it shows a message that reads, "Atleast one of the signatures is invalid"
-
Publish Bid Invitations.
Hi Guys, need help in the following: 1) What does public bid Inviation mean? My understanding is that we will not have to assign any bidders to the bid invitation and it get published on a portal. 2) How do I publish the bid on a portal - I want to p