RRI Jump Works with SAP GUI 7.20 Patch 3 but not with Patch 4

Hi,
I have an a RRI jump to an R/3 transaction working when executed via 7.20 GUI for Windows - Patch 3. However, the same jump does not work when executing with an updated GUI to patch level 4. There is no error message, nothing happens. I tried recreating the RRI with the new GUI patch and it didn't solve the problem.
I saw a couple of OSS Notes taking about enhanced security for patch 4, i.e. 1526048 & 1397000). Is this related?
Has anyone else had a similar issue?
Thanks,
Sheila

Hi Martin,
where did you get this info? Any official SAP note available? Do you encounter similar problems?
We, too, noticed that uploading and downloading files from directories with German Umlauts, this fails now,too. There may be problems with files, too, however, we did not check this so far. The previous SAP Gui, I guess it was 7.10, didn't have any problems with this.
I start wondering if SAP Germany have ever tested this? Or do they not use Umlauts anyway

Similar Messages

HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John Lee

Looking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

Hi everybody,
we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
Does anybody detect the same problems?
Best regards,
Ulli

Most important question when you are talking about performance-issues:
which OC are you working on and which excel version?
ciao
Joke

PC Used to work with XP and airport Extreme Basestation but not with Vista

Please help, my PC Used to work with XP and airport Extreme Basestation but not now with Vista. I have a MacBook Pro connected and also a Mac Pro connected to the network on it and they still work, i have put the latest software on the PC and the firmware is up to date. The only thing i can see on the network on the PC is the basestation Hard Disk (shared also to the Macs) but i cannot connect with the password, i have tried everything in my knowledge, including formatting the machine and reinsatlling OS and changing security setting to no avail. Any ideas anyone?

With regard to your printer problem - take a look at this discussion:
http://discussions.apple.com/thread.jspa?messageID=6312413&tstart=0

My Photoshop Elements 11 works with RAW from my Nikon D5100 but not with my D5200?

Is there a download to cope with the greater number of Mbs in the D5200 image?

Abeldacre wrote:
Is there a download to cope with the greater number of Mbs in the D5200 image?
Explanation here:
http://forums.adobe.com/thread/1030798?tstart=0
Each camera model has its own raw format. The 5200 format was issued after PSE11.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
So 3 solutions :
- use the Canon software to convert to tiff files that can be edited by Elements editor
- update to PSE12
- (my advice) use the free Adobe DNG converter to batch convert your raw files to the DNG format. Your PSE11 will be able to edit them and you'll keep all the advantages of raw editing.
The size of your raw files are not relevant here.

Can video chat with Aim users on a PC but not with Ichat users on Mac!

Hello
I am having the odd problem of being able to video chat with someone when they are using their pc running aim, but I cant chat with the same person when he on his Mac!
I am running as DMZ behind a Linksys WRT54G wireless router.
The problem is on my side because I cant chat with the test accounts either.
I tried this after bothe forwarding and triggering all the ports that were suggested.
I am stumped!

Hi Lullah,
This is going to be down to the Staelite connection.
It has what is called latency.
This adds an unexceptable delay in the passing of data at the start of the connection.
Very few people have reported success.
The things you can try are to fool the link into passing more intense data prior to starting a chat.
If you have web pages try uploading a Pic of larger file to the site.
Just as this finishes start up iChat
You should also check that System Preferences > Quicktime > Streaming tab has the speed to match you download set.
Hopefully (But no reported success) you may get iChat to see more bandwidth as you have just had the modem busy.
Following the launch of iChat with a video chat request may be able to get that bandwidth.
Realistically the 128 k upload even if you were getting close to it is very tight to the lowest point Apple say will work.
Speed testing a 128 k service i likely to get a result of about 80% of the figure (102k) iChat will use about 80 % of what is left (you are down to about 83K). You are now below the 100k min.
With regards to your LAN there are several things that may help if not set up already.
Only have one device doing DHCP. The way routers work as compared to modems is that they pass all routing data though to the computers.
This means the computers can be sitting in two subnets (1) from Modem to computer via router and (2) from Router. The computer can only display one of these IP addresses but can get confuse info regarding iChat.
Do not use Port Forwarding or Port triggering, twice or together on the LAN. iCHAT does not like two lots of NAT (bath are forms of Network Address Translation [NAT]).
Use UPnP where you can.
IF you are trying to test this yur Mac to your PC you ahve to allow for the fact that the modem is handling two Video chats in effect. This means you need twice the minimum bandwidth (let alone the fact that ichat to AIM semms to like 50% more than Mac to Mac contacts.
Sorry to be the bearer of so much doom and gloom.
11:03 PM Tuesday; March 28, 2006

Not able to edit Yahoo Mail address book. Okay with Apple Safari's Yahoo Mail but not with Firefox's,

Editing a contact in Yahoo Mail it always just "hangs" (doing nothing) when I am using Firefox. Editing the same account using Apple's Safari browser went through without any problem. It seems that Firefox interface with Yahoo caused this.

Just found the answer (it's a reported bug) and a likely solution!
Instead of dragging the group over to the 'To' box in a new email, the suggestion was to just start typing the name of the group. So far it seems to be working!!!

How do I sync my Ipod Classic 160gb with my new computer (windows 8). It synced with my old computer (windows XP) but not with my new one (windows8)

How do I sync my Ipod Classic 160gb with my new computer (Windows8).? It synced with my old computer (WindowsXP) but will not do so on the new computer?

Hi Lechwe,
I had this issue recently, due to changing HD for an SSD.
In my case, since the library in my iPod was synced to the HD it was not syncing to the library in the SSD, though they were the same (had the same contents).
I found there's this checkbox in iTunes > iPod > [Settings] Music, called "Sync Music". Mine was unchecked, I guess due to iPod being synced to the old library. I marked the checkbox and clicked then in Sync. iTunes asked me if I was sure I wanted to sync the iPod with the "new" library, i clicked yes, and the it started determining the song to sync. Since the library was essentially the same (just a couple songs more in the new one), it synced the couple new songs and that was it.
Hope it helps!
Regards,
Awlo.

I have trouble opening PDF documents with Firefox. They will open using IE8 and with the older version of Firefox but not with the new version of Firefox.

Specifically, I am trying to open brokerage statements with Charles Schwab. I go to the link using Firefox and click and all I get is a blank box with ABOUT: BLANK in the header at the top. Yet, I had no trouble viewing the statements with the older version of Firefox and I also have no problem viewing the document using Internet Explorer. Any help you can offer is appreciated. I would rather continue to use Firefox as my browser and not have to use IE.

https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

Why does Adobe Reader 9.5.0 open pdf created by Excel, but not with Reader X.

We have a number of pdf's that open 100% with Adobe Reader 9.5.0, but not with Reader X.
On Reader X, the message “A Number is out of range” is shown and the image is corrupted.
The image was created using “File SaveAs PDF” from Excel (Office 2007), with “Standard” optimization.
For interest, if the same “File SaveAs PDF” from Excel (Office 2007) is used, but with “Minimum Size” optimization set, then the resulting pdf opens perfectly with both Reader 9 & X.
Distressing that a new version does not work where previous version did.

HI
Sorry, my first time posting and I don’t seem to be able to attach the problem pdf to my posting.
Example of problem file attached. Opens in 9.5.0 but not X
Regards
Colin

BEx Analyzer not working in SAP GUI 7.10

Dear All,
BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
OS: Windows XP SP2
Installed the following softwares (in the sequential order):
1. Microsoft .Net Framework 2.0 SP1
2. MS Office 2003 (without any service packs)
3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
While BEx Analyzer 3.5 runs fine, 7.0 does not.
Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
Thanks and Regards,
Sachin.

Hi All,
This problem is due to .NET 2.0 assembly(nothing but .dll's),
Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
If it does and still getting the error, then follow these steps,
1) Uninstall office03
2) Uninstall GUI
3) Uninstall .Net 2.0
4) Reboot
5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
5a) Reboot
5b) Install .net1.1
5c) Reboot
5d) Install .net2.0
5e) Reboot
6) Install office 03
6a) Reboot
7) Install .PIA's (O2003PIA.MSI)
7a) Reboot
8) Install setupall.exe for GUI
9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
10) Reboot
Let me know if you encounter any problems.
OR....
Update the Latest Patchs of GUI & Bex.
BI710SP03_300-10004472.EXE
bi710sp04_400-10004472.exe
gui710_6-10002995.exe
Hope it helps you...
@shaik

App-V 5 SP1: Error with SAP GUI 7.3

Hallo!
We work on a project to use SAP GUI 7.3 with latest fixes with App-V 5. This works fine so far with the exception of only one transaction in SAP - SWDD. This windows shows no icons on top. After waiting for a while this transaction stops working and SAP
GUI crashes. SAP support says it's an error with App-V. So we tried to find some error with process monitor. We are able to see many of these errors:
Date & Time: 19.11.2013 11:02:26
Event Class: Registry
Operation: RegOpenKey
Result: NAME NOT FOUND
Path: HKU\S-1-5-21-1393060369-1102717077-1881041405-25977_CLASSES\AppV\Client\Packages\4782139E-FD11-4C4D-84FB-57E849A8B823\Registry\Machine\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
TID: 10504
Duration: 0.0000049
Desired Access: Maximum Allowed
Date & Time: 19.11.2013 11:02:31
Event Class: Registry
Operation: RegEnumKey
Result: BUFFER TOO SMALL
Path: HKCR\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
TID: 10504
Duration: 0.0000021
Index: 0
Length: 0
Date & Time: 19.11.2013 11:02:31
Event Class: Registry
Operation: RegOpenKey
Result: NAME NOT FOUND
Path: HKLM\SOFTWARE\Microsoft\AppV\Client\Packages\4782139E-FD11-4C4D-84FB-57E849A8B823\Versions\E7BFC8A3-BB43-4739-A7A8-604AA3A68E84\Registry\Machine\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
TID: 10504
Duration: 0.0000123
Desired Access: Maximum Allowed
There are hundreds of these entries. What are these NAME NOT FOUND errors? Did anyone of you successful sequence SAP Gui 7.3 with App-V 5?
Thanks for help.
Dietmar

Hello,
See this topic which explains BUFFER TO SMALL.
http://blogs.technet.com/b/markrussinovich/archive/2005/05/17/buffer-overflows.aspx
The Name not found indicates that it is looking for a registry key (location is the path) and not finding it. That may not be a problem, as it usually traverses multiple locations (HKCU and / or HKLM, native and virtual..).
First question is;
On a machine with SAP installed natively - is there an entry named;
HKLM\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
or
HKCU\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
If yes, does it exist in the package?
Nicke Källén | The Knack| Twitter:
@Znackattack

An issue using the COM components supplied with SAP GUI 6.2 or 6.4

We are having an issue using the COM components supplied with SAP GUI 6.2 or 6.4. We used to have SAP 4.6c and now we have 5.0. When we were on 4.6c, we used these COM components to logon and execute RFC calls and we had much success. Now that we are on 5.0, we cant seem to instance any SAP functions that have something to do with SAP Workflow. We have experienced this problem when using VB6 or .NET, but our existing code that always worked is in VB 6.0.
SAP Components used:
o     SAP Logon Control
o     SAP Function Control
o     Librfc32.dll
o     Other supporting C DLLs and/or COM object supplied with the SAP GUI installation.
For example, if we want to call the RFC ARCHIV_CONNECTION_INSERT, this code fails in VB6 when the Set objworkflow = objFuncCtrl.Add(strFunction) line of code executes. Instead of returning an instance of the object ARCHIV_CONNECTION_INSERT function, no object is created. In 6.2, SAP raises no errors, but the object we are trying to create is still Nothing. If we use 6.4, SAP raises an error SAP data type not supported via a message box and then the object is still = Nothing. Interestingly enough, the 6.2 GUI COM controls dont display the error dialog. The message box that is shown comes from the SAP Function COM Object "SAP.Functions" (wdtfuncs.ocx).
Now, what is interesting is if we use the same code to call a standard function or custom function that doesnt have anything to do with SAP Workflow, then the code works fine. Again, all of our code used to work just fine on an SAP 4.6 system.
Here is the code that fails:
    'SAP Logon control - object for creating connections to an SAP system
    Dim objSAPLogonCtrl As Object
    'SAP connection object
    Dim objConnection As Object
    'Object that will represent the SAP function called
    Dim objSAP As Object
    'SAP function control object - object factory for creating other SAP function objects
    Dim objFuncCtrl As Object
    'Create instance of an SAP logon conrol
    Set objSAPLogonCtrl = CreateObject("SAP.Logoncontrol.1")
    'Create a connection object
    Set objConnection = objSAPLogonCtrl.NewConnection
    'Define connecion parameters
    objConnection.ApplicationServer = "sapvm"
    objConnection.SystemNumber = "00"
    objConnection.Client = "800"
    objConnection.User = "iissap"
    objConnection.Password = "tstadm"
    objConnection.Language = "E"
    objConnection.TraceLevel = 10
    'call the logon method of the connection object
    If objConnection.Logon(0, True) = False Then
        MsgBox Error
        Exit Sub
    End If
    'Create an instance of the SAP Function control object
    Set objFuncCtrl = CreateObject("SAP.Functions")
    'Set the function control connection object
    Set objFuncCtrl.Connection = objConnection
    'Function name to be generated and called
    Dim strFunction As String
    strFunction = <b>"ARCHIV_PROCESS_RFCINPUT"</b>
    'Create an instance of the function defined in strFunction
    Set objworkflow = objFuncCtrl.Add(strFunction)
    If objworkflow Is Nothing Then
        MsgBox "Could not create object " & strFunction
    Else
        MsgBox strFunction & " object created."
    End If
If anyone has seen anything like this or has any ideas, please help!
Mike and Hameed
<b></b>

Hi,
documentation on the Scripting API is available at ftp://ftp.sap.com/pub/sapgui/win/640/scripting/docs/
This API is a replacement of the existing, obsolete COM interfaces.
Best regards,
Christian

Accessing local clipboard with SAP GUI for HTML - alternatives?!?

I need some creative suggestions (PLEASE!!!) to a problem that weu2019re having replicating functionality that works in SAPGUI but which we canu2019t get working in SAP GUI for HTML.
In SAPGUI we are able to open an external browser and pass a URL for the page we want to open. Once the page is open the user enters some data and receives a response which we then copy to the local workstation clipboard. From within ABAP we then read the clipboard contents and then copy them in to a field in the SAP screen. It works BRILLIANTLY!
However, Iu2019m not able to get the same functionality to work in SAP GUI for HTML with method CLIPBOARD_IMPORT of CL_GUI_FRONTEND_SERVICES. Apparently this class and the methods can not be used in SAP GUI for HTML u2013 however OSS note 314568 seems to suggest otherwise with this statement:
Clipboard access
In SAP GUI for HTML it is not possible to:
- read or write the clipboard using ABAP Objects class CL_GUI_FRONTEND_SERVICES.
This limitation no longer exists with ITS 6.20 Patch 23, SAP Netweaver 2004 SP 19 and SAP Netweaver 2004s SP 10.
Has anyone been able to use the class CL_GUI_FRONTEND_SERVICES to read from the Clipboard since this statement was made in this OSS note?
And my bigger question u2013 does anyone have a creative idea for a solution that will work?

Thank you experts,
Your answers have been really helpfull, we have to try another method, by Studio Program or ABAP code, unfortunely we have to implement this in so many computers, so is impossible to configure one by one.
Thanks to both, and have a nice 2009!
Ricardo Pineda
Edited by: Ricardo Pineda on Jan 13, 2009 2:09 AM

BOE XI R2 compatibility with SAP GUI 7.1

Hi Experts,
Currently, my company has BO XI R2 SP2 working with SAP BW 3.5. We use BOE XI R2 integration kit for SAP which is compatible with SAP GUI 6.4
Now we have upgraded system to BI 7.0. We also plan to upgrade the SAP GUI version to 7.1 as SAP has stopped support for SAP GUI version 6.4.
Can anyone please let me know what version of which SP of BOE XI R2 for windows can support GUI 7.1?
Thanks,
Smruti

Hi,
you should be able to get the latest list of supported version at http://service.sap.com/bosap-support
Ingo

Help with SAP GUI on Trial VMWare Edition

I currently have a trial version of NetWeaver installed (SAP NetWeaver 7.0.1 Java + ABAP Trial VMWare Edition), but having problems getting the GUI to work. The VM is using GNOME 2.12.2.
I'm currently having trouble with SAP GUI. According to SAP help, a requirement to run SAP GUI for HTML is Windows NT 4.0. Since I'm using GNOME, I tried to get the Java version to work.
When I try to launch SAP GUI, it gives me the following error:
http://i.imgur.com/0ZBVI.png
I wasn't able to troubleshoot the error, so I'm in the process of uninstalling this version of SAP GUI, and try installing again. However, I'm having trouble performing the uninstall. I did some reading, and it says to either run the SAPsweep.exe utility or NWSapSetup.exe. But I can't find either of them on my machine (tried doing a system search, no luck).
I found this thread to be helpful: Re: sapsweep.exe for SAPGUI 7.10 ?, but I'm not running on Windows.
Thanks in advance for any input

Hello Anoop.
The error occurs because you have selected OLE DB for OLAP Provider in the Business Explorer selection.
You can tell this from the following line in your sapsetup
00:43:58 NwSapsAtlC 1W Marking package SAPGUI_7.30 ({57F4A687-AE41-4BEA-9553-F852C36F8C1E}) as disabled: selected node OLE DB for OLAP Provider ({5390360A-98D9-4377-BD41-9A147392D000}) has failing condition.
Since you don't have Office installed,you cannot use the Business Explorer modules.
Run the installation again only selecting the components you require.
Jude

RRI Jump Works with SAP GUI 7.20 Patch 3 but not with Patch 4

Similar Messages

Maybe you are looking for