RSA1 - Source system connection : No connection to system  possible

Hello friends,
I am creating a Source system connection from our BW system. I have already established the working RFC connection to source system which works fine, both side client is open & system is modifiable.
Bit i am getting error : No connection to system  possible
No connection to system  possible
Message no. RSAR501
Diagnosis
Logical system  cannot be accessed.
System Response
Error during the retrieval of the logon data store d in secure storage
Procedure
Use transaction SM59 (for BAPI and SAP source systems) or DBCO (for database source systems) to check the RFC parameters of source system . Also check whether the system can be accessed in the network and whether the necessary application and system programs have been started.
I have already implemented SAP note 1276270 - RSAR 501 for source system restore due to router string /H/ without success.
thanks
ashish

Error during the retrieval of the logon data store d in secure storage
Have you tested the remote login also ?
Regards,
Subhash

Similar Messages

  • While connecting the MSSQL (2000, 2005) to BI 7 in rsa1 source system getti

    While connecting the MSSQL (2000, 2005) to BI 7 in rsa1 source system getting below error.
    (When calling a function within the database interface, a return value which cannot be processed by the calling function was provided.)
    Please help me to solve these issues.
    Iu2019m able to connect Oracle 10.g as source system and can view the tables and views.
    BI 7
    Windows 64 bit
    Oracle 10 .2
    SAP GUI 7.
    Advance Thanks,
    KARAN
    Edited by: Harish  Karan on Jun 26, 2008 2:51 PM

    Hello All,
    I found the solution for my particular situation!
    When checking the runtime object for CLU4, an inconsistency in the runtime object popped up:
    - the ABAP dictionary contains the field K5N1
    - the DB dictionry contains the field name K5N01
    This is a known and documented inconsistency, see note 902817 for the description.
    BUT: the solution pointed out there is wrong! The note suggests to delete all content from the physical tables and then activate the table in SE14. This is not possible for cluster tables neither in SE14 nor in SE11.
    This solution worked for me for both CLU4 and VER_CLUSTR:
    - as the tables should be empty normally I dropped them in the database
    - unlock the shadow instance with SAPup
    - log on on to the shadow instance
    - I then made some arbitrary change to the table definition in SE 11 (like adding a field). Make sure to maintain the size class also, otherwise the table won't be activated
    - save the changes and activate the tables
    - take back the previous change
    - save and activate again
    - lock the shadow instance
    - restart the upgrade phase
    Once the upgrade is done, check whether the physical table exists in the DB.
    Hope this helps!
    Regards,
    Matthias.
    Edited by: Matthias Dörfel on Nov 18, 2011 3:14 PM

  • Connect one SAP ECC 6.0 source system to 2 SAP BW system

    Hi!
    I copied SAP BW system (e.g. BW1 --> BW2).
    My source SAP BW system "BW1" was connected to SAP source system "MM5" (tcode RSA1).
    Now I would like to connect my new SAP BW system "BW2" also to this SAP source system "MM5".
    When I do so I get the following error:
    Connection cannot be used.
    Connection BA is used in the MM5:400
    source system as a connection BW1CLNT001 to BW
    Do you want to delete this connection in the source system?
    Question:
    Can one SAP ECC system be connected to 2 SAP BW system?
    If yes, what are the steps to do this?
    Thank you!

    Thank you very much!
    The question still is how to proceed with the following dialog screen/warning?
    Connection cannot be used.
    Connection BA is used in the MM5:400
    source system as a connection BW1CLNT001 to BW
    Do you want to delete this connection in the source system?
    YES or NO
    Thank you!

  • ABAP source code to connect to third party systems using web service calls?

    Hi all,
              can any one provide an example ABAP source code to connect to third party systems using web service calls? The base system is CRM.

    Do you want to call a web service in a remote system, or do you want to provide a web service?
    If you want to call a web service you should create a proxy object via SE80. Open your development package, right click on the tree entry and choose: Create -> Enterprise Service / Web Service -> Proxy Object and provide the needed information (including the WSDL description file). You may then use the proxy object to call the web service (if the connection and everything else works right).
    See [http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm]

  • How to check how many source systems are connected to my BW system?

    Hi friends
    how to check how many source systems are connected to my BW system?
    Regards
    BN

    Hi All,
    Thanks a lot for your help. its resolved now with your help.
    Regards
    BN

  • Source system settings DB Connect

    trying to change the IP settings for source system get message
    :Source system default settings are maximun values; input adjusted..
    Source system is DB connect, any idea how can change settings?
    It is correctly in BW : sbiw and spro set to correct level of 50 000.
    But somehow the IP says the settings max is 5 000.
    I need to increase this level as I have 10m records to load. .
    Please asssit.
    Thanks

    Follow OSS note 931226 for DBConnect datasource related packetsize setting.

  • Error while connecting to R/3 system

    Hello All,
    I am trying to connect BW and R/3 system .I have done all the necessary settings : RFC connections, Defined message types, generated partner profile.
    Now I am trying to connect to R/3 system through RSA1. I picked up the right target host and have all the authorizations, but when I click 'USE' for the creation of source system, I get an error ' Error in source system'.
    How can I find out the exact problem.
    Regards,
    NIKEKAB

    Hi
    See SAP Help
    http://help.sap.com/saphelp_nw2004s/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/content.htm
    Connecting ECC6.0 and SAP BI
    Setting-Up a Connection between BW and R/3 for Data Load
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152&overridelayout=true
    Configuring RFC in BI7 for connecting ECC6 server:
    Connecting ECC6.0 and SAP BI
    Thanks
    Reddy

  • BI System copy: 2 SAP BW system should be connect to same R/3 system

    Hi!
    We have copy one SAP BW system SR1 to another SAP BW system SR2.
    SR1 was connected to SAP R/3 system R31.
    As consequence the new SAP BW system SR2 has also in RSA1 --> source system the entry of SAP R/3 system R31.
    We would like to restore the source connection in new SAP BW system SR2.
    By doing so a pop up comes up with decision to delete an existing connection R31<CLNT>XXX or not to delete this connection to the first BW System SR1.
    Question:
    Can 2 BW systems (SR1, SR2) be connected to the same SAP R/3 system (R31) and what should we do in this casee with pop up (delete or not delete the existing connection to the source BW System SR1)?
    Any helpful information will be very appreciated!

    HI
    > Can 2 BW systems (SR1, SR2) be connected to the same SAP R/3 system (R31)
    Why not? One R/3 system can be connected to many BI/BW system.
    > what should we do in this casee with pop up (delete or not delete the existing connection to the source BW System SR1)?
    This pop up is coming because you created your SR2 system as a copy of SR1 system. If you have access to your R/3 system, you can check in table RSBASIDOC there will be  only one entry R31CLNTXXX --- SR1CLNTXXX which is creating problem
    What you can do is to run one FM RSAP_BIW_DOSCONNECT ( in the new system) and delete the entry for R31CLNTXXX and SR1CLNTXXX. Then also delete some correspondign entries from EDP13, EDPP1 and EDP21. Then in the new system , from RSA1 create new connection. I Before creating the new source system connection, in your new BI system you can delete the RFC connection for the R/3 system from SM59. During creation of new connection this RFC will be generated once again automatically.  should work fine.
    Remember, DO NOT delete connection from RSA1 which in turn will delete all the dataSources.
    Please also follow SAP Note 886102 - System Landscape Copy for SAP BW and NW BI carefully before doing ANYTHING with RSBASIDOC.
    Regards
    Anindya
    Edited by: Anindya Bose on May 4, 2010 12:17 PM

  • Table does not exist in system after DB Connect

    Hi Everyone,
    I must extract data from a oracle db.  I create a source system with DB Connect and it's connect successful.
    Later, i create a datasource for that source system. but it show the table does not exist in system. I'm sure the table is correct. why?
    Thanks!

    Check the schema names & ensure it is with the same owner/name as in the DB source table/view. You can also use a simple lookup table which checks table/views in your schema from other standard tables.

  • Cannot connect to the phone system. An unidentified error has occurred, Please try again.

    Issue:  Lync 2013 users with remote call control enabled cannot connect to the phone system.  When the user logs into Lync, they see an exclamation in the bottom right corner
    with this error.
    Error:  Cannot connect to the phone system.  An unidentified error has occurred, Please try again.  If the problem continues, please contact your support team.
    Environment: 
    1 site:  Site1
    2 Pools:
    1. Lync 2010
    Trusted application is added here for the site.
    2. Lync 2013
    Avaya phone system:  AES r6-1-2-32-0
    I have not moved the trusted application to the Lync 2013 pool yet, but my understanding is that it should still work since it’s in the site.  Is my understanding on this correct?  (All of my other trusted applications do work for Lync 2013
    users & none of them have been moved yet. Remote Call Control is the only one that does not work.)
    This is from the uccapi log.  This is just from the user logging in, not actually making a call.  Below are the items that I think are important, however, I don’t know how to interpret it to determine if the problem is on the Lync side or
    the Avaya side.  Here’s a summary:
    SIP/2.0 100 Trying
    Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="E05700E2", snum="9", rspauth="f308eae87c0bbe64a1ab213574776cbdf9823ab6", targetname="lync03.domain.com",
    realm="SIP Communications Service", version=4
    From: <sip:[email protected]>;tag=bbb282ebbd;epid=a86d5b0a29
    To: <sip:[email protected]>
    Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
    CSeq: 1 INVITE
    Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
    Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
    Content-Length: 0
    SIP/2.0 200 OK
    Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="15C0F9A2", snum="13", rspauth="4fd891e39a33e902fb1cec5d980e5bf0ccb172a0", targetname="lync03.domain.com",
    realm="SIP Communications Service", version=4
    From: <sip:[email protected]
    >;tag=bbb282ebbd;epid=a86d5b0a29
    To: <sip:[email protected]
    >;tag=A7A45C856ECD79121A1827265ABBD7F6
    Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
    CSeq: 1 CANCEL
    Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
    Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
    Content-Length: 0
    SIP/2.0 487 Request terminated
    Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="F46EC133", snum="14", rspauth="1d92718caa4f61d967faa46a5c256aafa8b4e740", targetname="lync03.domain.com",
    realm="SIP Communications Service", version=4
    From: <sip:[email protected]
    >;tag=bbb282ebbd;epid=a86d5b0a29
    To: <sip:[email protected]
    >;tag=A7A45C856ECD79121A1827265ABBD7F6
    Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
    CSeq: 1 INVITE
    Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
    ms-diagnostics: 5002;reason="Request was cancelled";AppUri="http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent";source="lync03.
    domain.com"
    Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
    Content-Length: 0

    Hi Suelizy,
    To better understand the issue, I would like to collect the following information for troubleshooting:
    1. Do you mean the Lync 2010 user can connect to the Phone System?
    2. What’s next hop pool of the application?  
    In a mixed environment, you must set the next hop pool to be the Lync Server 2013 pool.
    Best regards,
    Eric

  • Connecting two BI systems to one R/3 system

    Hi Experts,
    We are upgrading our BW 3.x to 7. This activity we are doing on a sandbox server. Now for integration testing we want to connect this BI sandbox to R3 QA system. RFC destination parameters are maintained in both the systems.
    Now when we go for source system Restore option from DW workbench, it pops up with message -
    "Connection AA is used in the ARQ100 (R/3 QA) source system as a connection ABQ100 (BI QA).
    Do you want to delete this connection in the source system? Connection is restored after it has been deleted successfully."
    I checked in RSBASIDOC table in R3 QA system, there exists this entry to ABQ100.
    My question is - without touching the R/3 QA -> BI QA connection, can I create a connection between R/3 QA & BI sandbox? & How?
    or Can we create new connection similar to AA for this new BI sandbox system?
    I have already gone thru SAP Note - 775568, but it does not mention anything related to my scenario.
    So appreciate help from experts.
    Regards,
    Vikram.

    Hi WernerS,
    Thanks for the reply.
    Both the BI systems have diff Logical Sys names. And at this time I am not concerned about delta.
    But as I mentioned earlier, while trying to restore source system from new BI sandbox server, it is asking to delete the connection from R/3 QA to BI QA which I dont want.
    My question is How to establish this new connection without disturbing the existing R3 QA to BI QA connection.
    Regards,
    Vikram.

  • Connectivity between SAP ECC system and SAP BI

    Connectivity between SAP ECC system and SAP BI
    Hi BI-experts!
    I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
    The Loading process is hanging in processing step u201CSERVICE APIu201D.
    The process  in hanging in status "yellow" and then changed after a while to status u201Credu201D.
    [0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
    The following steps within Load process are yellow and then red:
    Extraction (messages): Missing messages
    Missing message: Request received
    Missing message: Number of sent records
    Missing message: Selection completed
    Transfer (IDocs and TRFC): Missing messages or warnings
    Request IDoc : Application document posted (is green)
    Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
    Info IDoc 1 : sent, not arrived ; Data passed to port OK
    Info IDoc 2 : sent, not arrived ; Data passed to port OK
    Info IDoc 3 : sent, not arrived ; Data passed to port OK
    Info IDoc 4 : sent, not arrived ; Data passed to port OK
    Subseq. processing (messages) : Missing messages
    Missing message: Subseq. processing completed
    DataStore Activation (Change Log) : not yet activated
    Question:
    Can some one tell me whether my distribution model or other settings are wrong?
    I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
    Thank you very much!

    Hi Holger.
    this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
    1. check your BI system logical name from the myself source system.
    2. go the ECC and run the transaction sm59
    3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
    4. double click it and edit it now check whether the Target hostname or ip is OK.
    5. In the logon tab check the client number User and password settings.
    Save it and test it with both Connection Test and Remote Logon.
    if every thing work fine i hope your problem will be solved.
    kind regards,
    Zeeshan

  • Connection Failure for JDBC system in Session Bean using JCA

    Hi,
    I am trying to write a session bean that runs a query
    against a JDBC system, but I keep seeing the following
    error in the default trace file in the J2EE log folder:
    14##0#0#Path##Java###Throwing
    #1#java.sql.SQLException: Invalid connection string
    attribute: Database name is required but not supplied#
    #1.5#
    This is the code, with the line marked (*) being the point where the exception is thrown:
    public void getConnection(String sURL, String sUser, String sPassword) {
    ManagedConnectionFactory mcf = null;
    IConnectionFactory cf = null;
    IConnectionSpec cs = null;
    try {
    mcf = new JDBCManagedConnectionFactory();
    cf = (IConnectionFactory) mcf.createConnectionFactory();
    cs = cf.getConnectionSpec();
    cs.setPropertyValue("UserName", "sa");
    cs.setPropertyValue("Password", "admin");
    cs.setPropertyValue"driver",
    "com.sap.portals.jdbc.sqlserver.SQLServerDriver");
    cs.setPropertyValue("url",
    "jdbc:sap:sqlserver://localhost:1433;DatabaseName=pubs");
    conn = cf.getConnectionEx(cs);  (*)
    I have tried adding another property value, like so:
    cs.setPropertyValue( "DatabaseName", "pubs");
    (or)  cs.setPropertyValue( "Database", "pubs" );
    but I still get the same exception. What does this
    exception really mean, what is missing from the
    configuration information ?
    Also, in the default trace file of the J2EE engine, the
    configuration information is printed out, but in an
    encrypted format, (see below), is it possible to have it
    print out this information in a readable format ?
    #1.5#005056A41E66006200000092000009AC000406E03C94F3D9#1133460065906#com.sap.portal.connectors.JDBC#sap.com/CFV3#com.sap.portal.connectors.JDBC#Guest#0####71758520629411daacf7005056a41e66#SAPEngine_Application_Thread[impl:3]_14##0#0#Info##Plain###UserName: ????n????????????????????d?????????????????????????????????????????????s???????????????????????????????????????????????0??????????????????????????????????????????????????h?????0??????R???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????s?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????c???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????u??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????c???????????????????????????????????????????c????????????????3?????????3????e??????????????????????????????????????????????????l???????0????????1????1?????????????????????????????????????????????????????????s?????p?????????????????????????????????????????????????????????????????6?????????????3??????????????s????????????????????t???????????s????????????????????????????????????????????????????????????????????????s????????????????????????????????????????????????????????s?????????????????????????????????g????????????????????????????????????????????????????????????????????????? Password: ******** URL: ???????????????n??????????????????????????????????????????????????????????????????????????0?????e??????????????????????????r?????????????s?????????????O??????????????2???????????7????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????:????5???T?????????????????????????l?????????1????????????????????????????????????????????????????????????????????????????2??????????????????????????????????????????????????????????????????????????????????????????????????h???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????a??????????????????????????????????????????????????????????????????????????????????????????????????S??????????????????????????????????????????????????????????????????????????????????2???????????????????????????u???????????????????????????????????????????????????????????????????????s???????????????????????????????????????????????????????????????????????????????????????????????s?????????????????????????????????????????.?????????????????????????????????????????????????????????????????1????????????????????????????????????l????5??????????? Driver: com.sap.portals.jdbc.sqlserver.SQLServerDriver#
    #1.5#0

    Hi Vladimir,
    thanks for your response. The reason I am accessing a
    JDBC source via JCA is to get a feel for how JCA works.
    What I ultimately want to do is construct a bean that can
    give queries to different kinds of sources; JDBC, and SAP
    (R3, CRM), and possibly sources like Siebel. For this, I
    believe I should use the Connector Gateway Service, as
    described in the "Using the JDBC Connector" and "Using
    the SAP Backend System Connector" sections of the SAP
    Portal Developer's Guide. But for now, my first approach
    was to use the approach described in "Connecting via
    J2EE" subsection of "Using the JDBC Connector" (see
    http://help.sap.com/saphelp_nw04/helpdata/en/30/a0f17aacb34b108b39a96acc33da3f/content.htm)
    Thanks,
    Colm.

  • MSFT_ISCSITarget.Connect() Method is throwing System.Management.ManagementException "not found"

    I am using c# wmi calls to connect to connect to ISCSI LUN through ISCSI initiator. I am using windows server 2012 r2. From server manager I am able to connect through ISCSI initiator. From GUI every thing is working fine.  I am able to list ISCSISessions
    through ISCSISession.GetInstances() in c# code. WmiExplorer is also showing that connect method is there. Generated class contains the connect() method.
    System.Management.ManagementException was unhandled by user code
      HResult=-2146233087
      Message=Not found  
      Source=System.Management
      StackTrace:
           at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
           at System.Management.ManagementObject.Initialize(Boolean getObject)
           at System.Management.ManagementObject.get_ClassPath()
           at System.Management.ManagementObject.GetMethodParameters(String methodName, ManagementBaseObject& inParameters, IWbemClassObjectFreeThreaded& inParametersClass, IWbemClassObjectFreeThreaded& outParametersClass)
           at System.Management.ManagementObject.GetMethodParameters(String methodName)
           at ROOT.MICROSOFT.WINDOWS.STORAGE.ISCSITarget.Connect(String AuthenticationType, String ChapSecret, String ChapUsername, String InitiatorInstanceName, String InitiatorPortalAddress, Boolean IsDataDigest, Boolean IsHeaderDigest,
    Boolean IsMultipathEnabled, Boolean IsPersistent, String NodeAddress, Boolean ReportToPnP, String TargetPortalAddress, UInt16 TargetPortalPortNumber, ManagementBaseObject& CreatediSCSISession) at ROOT.Microsoft.Windows.Storage.MSFT_iSCSITarget.cs:line
    402

    Hi,
    The issue is related to C# language, I suggest you ask for help from MSDN forum for better and accurate answer to the question.
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • One R/3 system connecting to TWO BW systems

    Hi ,
    When we connect two bw systems to one R/3 system,
    could you please exlain what is the imact to SAP and BW in terms of query performance, batch performance,Develoment ,Quality system,security,BW Support.
    Thanks in advance.
    Regards,
    kranthi

    Hi,
    Well at first thought, i wouldnt go for the Landscape that you are suggesting. Because of obvious reasons:
    1. Performance issues while loading, on reporting.
    2. Data sources might work fine for one system and not for the other, then the whole setup is hit badly.
    3. Security and management of the 2 systems, will be a big task.
    4. Jobs would take a longer time if the Batch processes are not sufficient.

Maybe you are looking for

  • How do i find out what is taking up all  of my gb on my iphone 4

    I do i find out what is taking up all of my gb on my iphone 4? I have deleated all of my pictures, music, and games. There is nothing left in the usuage column to deleate but it says i have used 3.8. Where is it hiding?

  • Problems with Windows Vista

    New here and new to Vista. I was told last week that though Oracle does not support Vista that many have it and have not had problems. I use the Siebel On Demand and work from a company from home. Just got this computer this weekend and though I can

  • Can't we use function to derive value for NEXT clause in MV ?

    Hi Friends, I have a requirement like below I need to derive the schedule (Value for NEXT clause in the create MV command) for a MV to run it e.g., Value from a date column : 03-JUL-2012 10:00 AM, VALUE for NEXT clause in CREATE MV statement should b

  • Two Step Login Fails

    We have a user account on our lab computers for required testing. After logging in to the test account, the test program (NWEA TestTaker) launches, and a user name and password is required to continue. When using a UNIX command to simultaneously logi

  • E3200 - Won't connect to Vista with Atheros adapters

    Initially a very easy set up. That is until I tried to connect my older computers. After multiple attempts on both older Vista computers, it was always connecting to router but never to internet. Finally I tried tech support but only could do on line