RT: Remote desktop says "can't find a suitable device for drive C"

Hello,
there is a french post on exactly the same topic, but I can't apply the solution given there.
My problem is the following: I have a remote desktop prepared to work as RT target. It has been checked for compatibility, the hard drive has been formatted in FAT32 format, it has been found by my host and has been assigned a static ip address. I have installed the software I need ( LabView 9.0 RT) using MAX. Now, when I try to boot it with the option "boot using software installed into the hard drive", all I get is the message
"Can't find a suitable device for drive C"
I have reseted the BIOS, have tried formatting the hard drive in the other format, uninstalled and reinstalled the software, tried to start the target pc without the usb stick, but nothing seems to work.
Do you have any ideas about what is going wrong?
Thank you,
Samuel
Solved!
Go to Solution.

So you've got a IDE (and not SATA) hard drive? That should be supported anyway.
That would only confirm my experience... it's hard to find hardware compatible with LV RT. Before buying you cannot know if it's compatible. Once you have it the evaluation tool might tell you it's supported but still it might not work. I tried several motherboards in the last years, most of them did not work.
Your best bet might be to use relatively old hardware.

Similar Messages

I can not find Apple Mobile Device USB Driver

My itunes can not show iTouch and iPhone
but I can find them on my computer
I follow the
iPod: Appears in Windows but not in iTunes
But I still can not find the
Apple Mobile Device USB Driver is installed

Have you done:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
What results do you get when you run this:
iTunes for Windows: Device Sync Tests
Do both the Home button and Power button work OK normally?

Can't find a bootable device after trying to install Windows 7 in bootcamp

I've been trying to install Windows 7, 64 bit. Haven't managed yet due to problem that I've just posted about in a separate thread. Now, though, when I switch on it says 'can't find a bootable device'. If I switch on whilst holding down the Option key, the (OSx) internal hard drive is there and I can boot up. But I don't want to have to do that every time... Tried resetting the PRAM as advised, made no difference.

Look at Apple () -->system preferences -->*Startup Disk*
hope this helps

Remote printer is recognized but message says can't find printer? It worked great before installing OSX Maverick

Remote printer is recognized but message says can't find printer? It worked great before installing OSX Maverick?

Thank you for your response.
Unfortunately I have already rebooted the router and that did not fix the problem. The weird thing is that the computer is connected to the network, it just won't connect to my computer. I have printed the network configuration page to confirm this, and it says the wireless signal is strong.
I have not changed anything at all recently in terms of routers, networks, etc. The printer stopped working completely randomly.
Is there a part in the printer that like emits a signal which computers, phones, etc are supposed to detect? I don't know enough about the mechanics to really theorize about what is wrong, but it seems like that is the only thing that stopped working.
Do you have any other suggestions?

Logic Remote iPad app can not find my iMac.

I have tried every thing suggested on here to try and fix this but the Logic Remote iPad app can't find my iMac running Logic Pro X.
They are on the same Wi-Fi network, I've disabled the firewall, turned on file sharing, deleted and reconnected to my Wi-Fi on both my iMac and my iPad, removed all other CS's etc etc etc. Any thoughts about anything I may not have tried?
Thanks!

Check your WiFi router (which one do you use?) has multicast enabled,,,,
If it is...
To eliminate any possible router issues...
Test with an Ad Hoc network
http://www.maclife.com/article/columns/maclife_101_how_create_adhoc_network

Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6". Where can I find it? Thanks for

Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

Connected to the internet but browser says 'can't find server'

Hi,
I have an Apple Airport Extreme and it has been working well for a long time. My husband and I both run our internet connections from it wirelessly. Recently, when we go to connect to the internet, the browser says 'Can't find Server' but the Airport status bar says we are fully connected to the internet with a strong signal. I have no idea what happened or what is going on. The only thing that we have done differently is update the firmware on both our computers, and it seems as if this problem has started around that time. Any suggestions would be greatly appreciated. Thanks
April

It might be a good time to perform a complete power recycle of your network components to make sure they are "talking" to each other properly and see if this resolves the problem.
Please try the following:
o Power-down the modem, AirPort Extreme Base Station (AEBS), and computer(s); wait at least 15 minutes. Order is not critical.
o Power-on the modem; wait at least 10-15 minutes.
o Plug-in the AEBS; wait at least 5-10 minutes.
o Power-on the computer(s).
Can they access the Internet now?

I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say install to Applications but it's not there. How do I find it and can I put it in my dock?

I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say it would install to Applications, but it's not there. How do I find it and can I put it in my dock?

In Safari's preferences:
Look in the folder displayed where you see the arrow. The actual Downloads folder is found in your Home (user) folder.

In Bridge when I R click on psd file and tell it to open in Photoshop it says can't find Photoshop.exe. Photoshop is running at the time. How do I teach it where Photshop.exe is?

In Bridge when I R click on psd file and tell it to open in Photoshop it says can't find Photoshop.exe. Photoshop is running at the time. How do I teach it where Photshop.exe is?

I have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

Tried to print from ipad4 with wifi printer. Saying can't find air printer. Printer on and it has printed previously.

Tried to print from my ipad 4 but saying can't find air printer. It has printed before.

Sharonanthony-
First, try double-clicking your Home button. A row of recent Apps will line up along the bottom of the screen. Scroll across and look for the Print Center icon. If it is there, you should be able to delete any print job that might be hanging it up.
If you can access the internet, then you should have a good connection to a printer that is using the same WiFi. If you do not have your normal connection to the internet, then I suggest you unplug your WiFi router for a few seconds. Then reset the iPad's network at Settings-General-Reset-Reset Network Settings. You will need to reconnect the iPad to WiFi.
Fred

Where can I find the pin-outs for 8-pin remote Hirose connector?

Where can I find the pin-outs for 8-pin remote Hirose connector?

Pin outs and wiring info is all in the Maintenance Manuals (same for all system cameras, F series, XDCAM etc.), - ask your local Sony Office if you want the info.The 8pin remote is for connection to the Sony RM-B150/170/750 remote control panels.For system cameras the same protocol is used between RCP panels, MSU, CCUs and camera heads.It is a proprietry system so extremely difficult to hack!The RM-B170 is the ideal panel to work with the PMW-F5/55. It will give basic painting control of R/B white & black painting, Master Pedestal, and Iris with the correct lens (Cabrio etc). It can also control remote Rec stop start.Regards, Clive. Sony ANZ.

Just installed elements 9 , plugged camera memory card into computer, I see it on my computer but adobe says can't find device ?

just installed elements 9 , plugged camera memory card into computer, I see it on my computer but adobe says can't find device ?

Perhaps the type of file on the camera card is not supported by elements 9 (I have elements 12 and all of my pictures are jpegs so I wouldn't know). You might have to save the pictures you want to your computer as jpegs.

HT1631 updated to the new os x mavericks, now i'm having problems with my keychain access...everytime i asked to log in but when i do, it says can't find login items even if i reset it. what should i do?

updated to the new os x mavericks, now i'm having problems with my keychain access...everytime i asked to log in but when i do, it says can't find login items even if i reset it. what should i do?

Did you install the latest driver set for the device? there is a new release on motu.com for mavericks.
rachel

I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?

I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?

Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
Many thanks. That issue will be causing the iTuneshelper error message too.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Ever since I downloaded this latest version, my browser is not loading the page. Says can't find the server error. This is very frustrating and slow. What should I do.

Ever since I downloaded this latest version, my browser is not loading the page. Says can't find the server error. This is very frustrating and slow. What should I do.

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

RT: Remote desktop says "can't find a suitable device for drive C"

Similar Messages

Maybe you are looking for