RTAI 3.8 Installation
Hi
I want to install RTAI 3.8 on arch Linux. So I have downloaded kernel linux-2.6.23.tar.bz2 and patched it to hal-linux-2.6.23-i386-1.12-03.patch in RTAI patch folder.
Then for configure the kernel i get following error:
#make menuconfig
Makefile:416: *** mixed implicit and normal rules. Stop.
Do you have any suggestion for solving the problem?
I could run make with the 2.6.32.54 kernel but the problem is that for installation i get the following error>
sh /usr/src/linux/2.6.32.54/arch/x86/boot/install.sh 2.6.32.54 arch/x86/boot/bzImage \
System.map "/boot"
cannot find Lilo.
any idea?
Similar Messages
-
Communicating between Labview RT code running on windows using Linux C code over network
Hi,
I have been working with Labview FPGA+RT for robotic applications (impedance control, tendon driven robotics etc.) for some time now. I was wondering if anyone has successfully been able to communicate with
shared variables being sent over a network by a labview RT program using C/C++ on a non labview Linux PC. I have been working on this for sometime and have read about CVI and Datasocket protocols. I am in the
process of making a library on my RTAI patched Linux installation to have a high level control loop on the Linux PC communicate with low level motor control and sensor data acquisition codes running on the labview RT
pc. In the worst case scenario I am planning to use basic network port sniffing to atleast acquire data.
Just thought I will ask here before wasting time reinventing the wheel. Any suggestions and ideas would be greatly appreciated as well.
Thank you for your time.
PrashantMorning Prashant,
You are on the right track. You can use datasockets from any environment to interface with a network shared variable. I've pulled some of the examples from CVI which show how to call network shared variables. These should help. You should search how to call data sockets in C then pass the address to them to read and write from.
Look into the polling example for the basics.
Kyle Hartley
RIO Product Support Engineer
National Instruments
Attachments:
networkvariable.zip 69 KB -
How to install Comedi for RTAI
When I install RTAI, there is an option Comedi v0.7.47, and the installtion manual said this option installs Comedi v0.7.47 into /usr/src/comedi-0.7.47/. Does this mean that Comedi has already been installed? But I can't find Comedilib.
Please post Comedi related questions to the Comedi group at:
http://stm.lbl.gov/comedi/mailinglist.html
FYI, NI does have register level programming source code available for a wide range of boards that can be used to program the hardware in Linux and other operating systems. Contact you local sales person to determine if code for your specific hardware is available.
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense -
Tried
https://discussions.apple.com/thread/2713232?start=0&tstart=0
and
http://www.vistax64.com/vista-general/159940-computer-blocking-anything-no-digit al-signature.html
with no avail!!!
iTunes opens after I click OK on the above message however I cannot do anything within the app its like Windows it preventing it from running.
PLEASE HELP!!!Update:
I tried what the diagnostic told me to do, and repaired the installation. I was able to burn a CD in iTunes, but after I restarted, the drives have disappeared again! Here's the diagnostic info now:
Microsoft Windows Vista Home Edition (Build 6000)
MICRO-STAR INC. MS-6728
iTunes 7.6.0.29
QuickTime 7.4
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.3.26
iTunes Serial Number 20D6EAF059AB94B4
Current user is not an administrator.
The current local date and time is 2008-01-15 19:09:32.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., Radeon X1600/X1650 Series
ATI Technologies Inc., Radeon X1600/1650 Series Secondary
** External Plug-ins Information **
Plug-in Name: Last.fm iTunes plugin
Plug-in Loaded: Yes
Plug-in Version: 0.0.13
Plug-in File Version: 2.0.13.0
Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
No drives showed up to be tested. -
I was not adding anything to Firefox. I Refused tool bars embedded in several application installs on this new computer. Was working fine. Then had a problem with Google search, restored default values and re-tooled Firefox. At this point all worked fine. Then my url, address bar changed color to the same color as the program shell, a grey brown as opposed to the white it was before. With the change in color it no longer allows me to change the data showing in the bar. I can not delete or add data. I used to add a url and navigate to the domain. Now I can not
Greetings,
TY for the reply, the information was enlightening to be sure. I never knew safe mode was an option with Firefox. I have so many tasks running that I didn't want to shut things down. What I did is turn off some of the last plug-ins I installed. That did not fix the problem at least in the first look. What happened next was very interesting none the less. I had a moment of mouse spastic wrist syndrome and accidentally moved a tab in such a way that it opened in a new window. The URL bar was white and editable. So I moved all my tabs to the new window and everything works as it should. I have restarted Firefox this morning and it came back with the bar editable and I am speechless to understand what I may have done to correct the problem if anything ?? -
Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM
Hello Experts,
we did some changes in the previosly uploded version of IPC AP 7.0 customer user exit Jar file in eclipse.
While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
when we checked the logs in SM 53 we seen the below mentioned error:
Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
--> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
at
if required i can post the complete stack trace.
any inputs/suggestions are most welcome.
Thanks & regards,
SiddharthHi Mark,
Yesterday after Posting the thread we found the same Note ,Issue occured because of JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
Thanks for your Help also.
Regards,
Siddharth -
Installation problem with NW'04 SR1: database connection failed
Hi all,
while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
Below I attached the sapinst.log and jload.log with more detailed messages.
sapinst.log ###########
INFO 2007-03-12 22:06:24
Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
INFO 2007-03-12 22:06:24
Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
WARNING 2007-03-12 22:06:26
Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
12.03.2007 22:06:25 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.2007 22:06:26 com.sap.inst.jload.Jload main
SCHWERWIEGEND: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
ERROR 2007-03-12 22:06:26
CJS-20065 Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
jload.log ###########
12.03.07 22:06 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.07 22:06 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
Best regards,
BerndHello Kairat,
Please follow the below mentioned guide to install it.
Check all the parameters to set and run pre requisite checker before starting installation.
Keep in mind that before starting any SAP installation you should always run prerequisite checker.
https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
Regards,
Amit Barnawal -
Flash 12.0.0.77 plugin installs to wrong folder
In Vista x64, using either Firefox 28 or Firefox 24.4 ESR, the plugin installer (one downloaded from Adobe distribution) installs the 32 bit .dll file to \system32\macromedia\flash\ folder;
installs the 64 bit .dll to: \sysWOW64\macromedia\flash\ folder. So, they're exacly reversed.
I uninstalled it completely - went well. Then removed 1 remaining file in one of the above paths, then reinstalled. Did the same thing.
Before I did all this - I was *very sporadically* seeing the FlashPlayerPlugin_12_0_0_77.exe file, running (kinda "sitting") in background, in task manager. It never came to foreground w/ a UI, asking for anything. Couldn't figure out what it was, until started looking in the installation folders.
That's what lead to discovery the files were in wrong folders.
Anyone heard of this?
BTW, "Nayana" of Adobe Support chat, is a few bricks shy of a load. Or I am. I couldn't create an acct for forums. She kept saying, you don't need an acct - "just post your question. Other people will answer it."EDIT: Seems there's no error in Flash installing to wrong folders, only error in my brain. Why didn't someone stop me from embarrassing myself?
System32 (in a 64 bit OS / architecture) is for 64 bit drivers, files; SysWOW64 is for 32 bit apps running in 64 bit OS.
https://en.wikipedia.org/wiki/WoW64
WoW64 (Windows 32-bit on Windows 64-bit) is a subsystem of the Windows operating system capable of running 32-bit applications and is included on all 64-bit versions of Windows
Also, http://www.samlogic.net/articles/32-64-bit-windows-folder-x86-syswow64.htm (section on SysWoW64)
End Edit.
Thanks for info on attaching images. A bit different than most forums. There's no "preview post" before submitting?
Screenshots of the 2 flash folder contents.
NOTE: I attached full FlashInstall.log earlier. I opened the 1.25 MB (text) file in an editor - copied contents to clipboard > paste to forum reply screen. Immediately locked up Firefox like a big dog. Couldn't perform any functions in Fx - not even reload or close browser. At same time, Fx memory use was continually climbing; to nearly 2 GB when I killed it. Won't make that mistake again.
Been many yrs since Fx locked up, doing anything. That aside, Adobe is definitely "different" than most forums. Almost like a person w/ no $ to use one of the many forum softwares available.
Most recent Flash installation logs.
C:\Windows\SysWOW64\Macromed\Flash\FlashInstall.log:
=O====== M/12.0.0.77 2014-03-27+18-59-59.282 ========
0000 [I] 00000010 "C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe" -maintain plugin
0001 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0002 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0003 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0004 [W] 00001037 Software\Macromedia\FlashPlayerPlugin/ 2
0005 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0006 [W] 00001021
0007 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0008 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0009 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0010 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0011 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl 2
0012 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0013 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0014 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0015 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0016 [W] 00001036 Software\Mozilla\Mozilla Thunderbird\extensions/Plugins 2
0017 [W] 00001036 Software\Mozilla\Thunderbird\extensions/Plugins 2
0018 [W] 00001036 Software\Opera Software/Last CommandLine 2
0019 [W] 00001036 Software\Opera Software/Last CommandLine 2
0020 [W] 00001036 Software\Opera Software/Plugin Path 2
0021 [W] 00001036 Software\Opera Software/Plugin Path 2
0022 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0023 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0024 [I] 00000011 1
0025 [I] 00000012
=X====== M/12.0.0.77 2014-03-27+19-00-34.066 ========
=O====== M/12.0.0.77 2014-03-27+19-15-43.835 ========
0000 [I] 00000010 "E:\DOWNLOADS\Software\Multi Media\Browser PLUGINS\Flash Player\Flash Player Fx\install_flash_player_12.0.0.77_plugin002.exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0004 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0005 [I] 00000011 1
0006 [I] 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0007 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0008 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0009 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0010 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0011 [W] 00001036 Software\Mozilla\Mozilla Thunderbird\extensions/Plugins 2
0012 [W] 00001036 Software\Mozilla\Thunderbird\extensions/Plugins 2
0013 [W] 00001036 Software\Opera Software/Last CommandLine 2
0014 [W] 00001036 Software\Opera Software/Last CommandLine 2
0015 [W] 00001036 Software\Opera Software/Plugin Path 2
0016 [W] 00001036 Software\Opera Software/Plugin Path 2
0017 [I] 00000014 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32_12_0_0_77.dll
0018 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe
0019 [I] 00000024 C:\Windows\SysWOW64\Macromed\Flash\plugin.vch
0020 [I] 00000017 C:\Windows\SysWOW64\Macromed\Flash
0021 [I] 00000022 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_12_0_0_77.exe
0022 [I] 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0023 [I] 00000021 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe
=X====== M/12.0.0.77 2014-03-27+19-16-11.879 ======== -
Installation problem on Solaris
I am trying to install sun one 7.0 on Solaris 8. The install is failing with this error:
ERROR - library load failed with following error: Can't load library: /opt/SUNWappserver7/lib/libinstallCore.so
INFO - End core server uninstallation
anyone know what causes this??
cheersLooks like Solaris package installation failed and installer reverted to uninstallation sequence. For low level pkgadd log please check /var/sadm/install/logs/Sun_ONE_Application_Server_install.B<timestamp> file (timestamp is date and time of your installation attempt in mmddHHMM format).
Look for any errors in this file. Most likely thing that could have happened is that the installation of Java Help (SUNWjhrt) package failed because you didn't have existing package based J2SE installation on the system. If that's the case, workaround is to either preinstall package based J2SE installation or to selected option to install bundled J2SE that comes with application server. -
Installation problem on CS4 Master Collection
WHen I attempt to install CS4 master collection on Vista Ultimate X64
While the installer is "checking system profile" the next window shows "Loading Setup"
I then get a System Check error page. The window label is "Adobe Creative Suite 4 Master Collection Installer - Alerts"
In the box it says, System Check.
Critical Errors were found in setup for Adobe Creative Suite 4 Master Collection.
Session has dependencies that cannot be satisfied.
please see the Setup log file for details. click Quit to exit Setup."
Then there is a Quit button, that is the only option.
Any ideas which services need to be enabled to be able to install creative suite?I do have service pack 1 for vista ultimate x64.
Here is the end of the log....
[ 436] Thu Oct 30 19:12:48 2008 DEBUG
PayloadPolicyInit: BEGIN Updating installstate for payloads
PayloadPolicyInit: END Updating installstate for payloads
PayloadPolicyInit: BEGIN Creating policyNodes
PayloadPolicyNode._SetPayloadAction: none for {092DF7B0-6E10-4718-9763-9704CC4E6EF9} Adobe Anchor Service CS4
[ 436] Thu Oct 30 19:12:48 2008 ERROR
Unable to load fileOptions from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Options\Op tions.js
Log of: object
name {string}: TypeError
message {string}: 'collectionID' is null or not an object
number {number}: -2146823281
description {string}: 'collectionID' is null or not an object
[ 436] Thu Oct 30 19:12:48 2008 DEBUG
updating path to Win32
WizardControl: loading page "Progress" from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Progress\P rogress.js
updating path to Win32
WizardControl: loading page "Register" from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Register\R egister.js
updating path to Win32
WizardControl: loading page "Finish" from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Finish\Fin ish.js
HTML data complete: Welcome
HTML data complete: Eula
HTML data complete: Progress
HTML data complete: Register
HTML data complete: Finish
[ 436] Thu Oct 30 19:12:48 2008 ERROR
Critical errors were found in setup for Adobe Creative Suite 4 Master Collection:
- Session has dependencies that cannot be satisfied.
Please see the Setup log file for details. Click Quit to exit Setup.
[ 436] Thu Oct 30 19:17:23 2008 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
Doesn't really make sense to me.... -
Installation problem on AS1.0.2.1, Can you help me !
I want to install the Oracle9i AS 1.0.2.1 on my computer, my OS is Windows 2000 Professional Edition (Japanese Edition). But when I run the isetup.exe program , I got a message box, "Setup has detected that your iSuite Product Install has not been setup correctly, probably becaulse the installation was aborted. Please restart Setup." I run the setup program again ,and the same message box opened.
How can setup or configure my machine?
Thanks!And there is some reason you can't? See the Apple article below.
http://support.apple.com/kb/HT4972 -
Installation problem on windows 2000
Hi,
Please help!
I've been tring to install oracle on windows 2000 machine unsuccessfully. the setup program aborted without error message. I've tried many versions of oracle database, 8.1.7 all editions, 8.1.6ee, 9iAS. the only message error I got when 9iAS failed to install (iSetup.exe). the problem seems to be with the java runtime environment. the jre 1.1.7 came with 9iAS would not run properly. I've tried to install java2 and jdk1.1.8 from javasoft, still no luck.
Any idea?
Thanks,
Jay Lee
[email protected]
nullHi,
The problem of installing Oracle Product on P4 computers comes from the symcjit.dll (Java Jusit in time compiler) which doesn't recognize the P4.
I installed Oracle products on my P4 just by copying the CD's on a harddisk and manually replacing the dll (which is Version 3...) by a one I found to be Version 4.0.0.7.
It is maybe not the best solution as it can result some instability (I don't know yet) but at least I didn't bought a brand new computer for nothing.
The question is to know when Oracle will deliver some patches to allow a normal installation on P4s.
Let me know if you want me to send you the dll.
Regards,
Jacques. -
Installation Problem on Pentium4 with ORACLE 8.1.7 Client
I tried to Install the ORACLE Client 8.1.7/8.1.6 on Pentium4 with NT platform. On inserting the CD it gave the first prompt and after Clicking the "INSTALL/DE-INSTALL PRODUCTS", system stops. Checking in the TaskManager helps us to know that 'setup.exe' and 'java.exe' were started for a fraction of the second and then stopped.
Tried to explore the issue and it seems that the JAVA version which ORACLE is using for the INSTALLATION of 8.1.7 is NonCompatible with the P4[NT Platform].
However, 8.0.5/8.0.6 Client version were successfully Installed on the same configuration.
Can Anyone help me out in Installing 8.1.6 on P4[NT base].
Thanks in advanceIs the machine you're trying to install on the
machine your display is running on?
If not, doing a
'xhost + name_of_machine_you_are_installing_on'
on the machine your display is running on should do the
trick.
Hope that helps.
M. Geselle -
Installation problem on AIX ( SAP4.7, Oracle-9i)
Hello Gurus,
We are installaing SAP4.7 on AIX with oracle-9i as an database
we have completed central instance successfully, while database instance we are facing error
I am attaching error log for your referenec
error log
You entered: /sapcd/oracle9/51030360/ORA92_1
Found the label ORACLE:9.2:RDBMS(1/4):Oracle RDBMS AIX5 CD:CD51018585_1 but need
the label ORACLE:9.2.0:RDBMS(1::
Can any body help me regarding this error.
Thanks & regards
Shishir> You entered: /sapcd/oracle9/51030360/ORA92_1
> Found the label ORACLE:9.2:RDBMS(1/4):Oracle RDBMS AIX5 CD:CD51018585_1 but need
> the label ORACLE:9.2.0:RDBMS(1::
Are the CDs numbers matching to your installation master CD?
Markus -
Installation problem on my debian 2.2.20
I tryied to install the Appserver 7 on my debian (Linux woody 2.2.20 SMP) without X11 ( ./setup -console ) but i have this error message
com.iplanet.install.util.wbResource::getString: resource string "appservResources:LinOSCheckPanel-CUI-unsupportedOS-Text" not found
appservResources:LinOSCheckPanel-CUI-unsupportedOS-Text
Please, anybody can help me ?
Excuse my poor englishfk wrote:
Hi
you can try these installation method
http://wiki.archlinux.org/index.php/Ins … her_distro
installation work fine..... the problem is the boot from disk after install.
P.S. i tried installation form ftp but the module of my eth card wont'load :cry:
marvell ---> sky2
Maybe you are looking for
-
I am trying to output a customer list containing customer number and customer name using 11i ( 11.5.10 CU2) with latest XML publisher patches on. How do I debug the following error in OPP log: [UNEXPECTED] [72156:RT1088889] oracle.xml.parser.v2.XMLPa
-
is it possible for me to get a new one and also some of the metal on the back has been shedding why is that happening??
-
Display DB SQL in APPLET (Urgent)
Hi, I want de learn about How to display a Table in MS-SQL 7.0 in Applet. Can you please give me web resources, where I can found informations. Thanks in advance. Sam
-
Mac Pro sudden restar while working
I just got my new Mac Pro and having very strage behaviour. While working logout suddenly and login screen comes automatically. All my apps are closed and my work which I was doing.... also lost. It happen specially with Cinema 4D app because most of
-
What are the differences between aiport extreme and linksys wireless router
We currently have an apple macbook connecting to the internet via a linksys router. We are considering an airport extreme wireless router, we are considering the cost. What are the advantages of purchasing an Airport Extreme router.... ??? Currently