RTF template does not format properly when run from Concurent Manager

Hi
I have complex RTF template; many stuff in are in header in word table format,body section again fields are in table format and Footer again in word table format.
When I run BI Publisher report as concurrent request half the content like header and footer are not displayed. I can see copmlete report when I preview using XML data in word. Is there any limitaions that certan fonts, word format features not supported in RTP template. What is the best way to put header, body and footen in main body area rather using Header and Footer features of word?
Thanks and regards

You can use the start:body etc syntax to move your header/footer into the main part of the document. This way you can use form fields.
Regards,
Gareth

Similar Messages

  • Avery Barcode labels does not align properly when printed from Adobe Reader 11.0.0

    Hi,
    I have barcode labels in a PDF (Version 1.4, Acrobat 5.x). PDF producer is PPAlambic(Distiller). When I try to print the PDF on to Avery 5160 sheet containing 30 labels (10 rows; 3 labels in a row), always the barcodes on the first column goes beyond the left margins and hence does not print the full barcode. PDF size is 8.5" * 11" .I have tried following options in Print dialog box:
    1. Actual Size + Portrait + Letter size
    2. Shrink oversized pages + Portrait + Letter size
    3. Fit + Portrait + Letter size
    None of the above options resolved my issue.
    When I open the same PDF in Adobe Reader 11.0.07, it prints perfectly. Does someone help me understand if this is a known defect in Adobe 11.0.0 and is there any workaround in 11.0.0 itself to adjust the alignment?
    Note: PDF is not editable as it comes from a third party vendor. Please help.

    Hi,
    I have barcode labels in a PDF (Version 1.4, Acrobat 5.x). PDF producer is PPAlambic(Distiller). When I try to print the PDF on to Avery 5160 sheet containing 30 labels (10 rows; 3 labels in a row), always the barcodes on the first column goes beyond the left margins and hence does not print the full barcode. PDF size is 8.5" * 11" .I have tried following options in Print dialog box:
    1. Actual Size + Portrait + Letter size
    2. Shrink oversized pages + Portrait + Letter size
    3. Fit + Portrait + Letter size
    None of the above options resolved my issue.
    When I open the same PDF in Adobe Reader 11.0.07, it prints perfectly. Does someone help me understand if this is a known defect in Adobe 11.0.0 and is there any workaround in 11.0.0 itself to adjust the alignment?
    Note: PDF is not editable as it comes from a third party vendor. Please help.

  • Application does not work properly when I press a CommanButton

    Hi all, I am having a problem with weblogic 10.3.5.
    It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
    But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
    How I can solve these problems?
    Thanks.

    Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
    " http://<our ip>:7001/myApp/faces/index.jspx "
    this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
    But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
    In the Afternoon we gonna give you more information about it .

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

  • Stationary credated in Mail does not appear properly when viewed in Outlook, is there aroundthis?

    Stationary credated in Mail does not appear properly when viewed in Outlook, is there around this? Or, can I export (as a PDF) the email drafted in Mail with stationary that does not have the meail info on top of the page . Thanks so much for your help.

    No real solution to problem 1, stationary tends to look different depending on the client, as for 2 Mail does not export to pdf but can print to pdf, however you still get the mail headers.

  • Music does not sync properly when updated to latest version.  Can see computer but can't play from ipod

    Music does not sync properly when updated to latest version.  Can see on computer but can't play from ipod.

    Hope this helps...
    I was having the same problem where only 1.7GB of 10GB of selected music would sync so I decided to start fresh.  The following steps worked for me:
    1.  Open itunes and connect iphone 5 if not already.  Uncheck all playlists, artists, etc. till nothing is checked to sync.  Then uncheck the sync music box so that all music will be removed from the phone.  Sync iphone
    2.  Eject device. Quit itunes (don't just close). unplug iphone.
    3.  Restart imac, macbook, or PC.
    4.  Restart iphone.
    5.  Now after power up, restart itunes then plug in iphone, check sync music and select music to sync.  Sync iphone
    6.  It worked for me!!!  Good luck.

  • Subvi does not work properly when called inside a vi

    Hello Every body
    thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
    any tips would be highly appreciated.
    thanks
    Regards
    Attachments:
    vi.zip ‏87 KB

    I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • I've been using FCP 7 on my iMac for quite some time with great success.  Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

    Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug)  I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years.  I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

    YOU ARE A LIFE SAVER!  I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

  • My keyboard does not work properly when texting etc

    Hi All
    My keyboard does not work properly on my Iphone 4 when texting, it brings the wrong letter or wont let me choose the one i want.  Anything i can do to correct this or is it a visit to apple?
    Cheers for any support in advance.

    I have rebooted and synchronised it with the mac.  I dont even have to touch the screen now and some letters get picked up.

  • Class not being created when running from jar

    Hi all,
    Tech info first:
    IDE: Sun Java Studio Enterprise 8
    Plaform: windows xp
    I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
        private static void createAndShowGUI() {
            //Make sure we have nice window decorations.
            JFrame.setDefaultLookAndFeelDecorated(true);
            Main receiver = new Main();
            receiver.getPropertiesFromFile();
            //Create and set up the window.
            frame = new JFrame("R�FILOG RFID Empf�nger");
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            frame.setContentPane(receiver.mainPanel);
            frame.setJMenuBar(receiver.createMenuBar());
            frame.addWindowListener(receiver);
            frame.setLocationByPlatform(true);
            //Display the window.
            frame.pack();
            frame.setVisible(true);
            portListener = new RFIDReaderComm(receiver, "COM3");
            portListener.getConfiguration();        
        public static void main(String[] args) {
            //Schedule a job for the event-dispatching thread:
            //creating and showing this application's GUI.
            javax.swing.SwingUtilities.invokeLater(new Runnable() {
                public void run() {
                    createAndShowGUI();   
    portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
    If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
    thanks in advance.

    Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
    This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
    Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
    Updating my computers CLASSPATH with the relevant paths - not working
    Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
    Tried updating the manifest.mf in the following way:
    Created a text file Manifest.txt with the lines:
    Class-Path: RXTXcomm.jar
    Class-Path: BrowserLauncher2-10rc4.jar
    ran the command (in the same directory as Manifest.txt):
    jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
    but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
    META-INF/
    META-INF/MANIFEST.MF
    classes/
    classes/CRCCalculator.class
    classes/Main$1.class
    classes/Main.class
    classes/RFIDReaderComm.class
    classes/URLDialog$1.class
    classes/URLDialog$2.class
    classes/URLDialog.class
    the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
    Please, can anyone help me?

  • Bug?: layers.add() is not working properly when invoked from menu (ID/CS6/Win7)

    Hello Devs,
    I am facing a mysterious issue with the layers.add() method.
    I am trying to create n number of layers for my document. So I have decided to create a menu for this.
    I have creatd two scripts
    1. For creating menu & menu action,
    2. Actual script that creates n number of layers.
    When I run the script #2 direclty from ESTK it works fine.
    Now when I try to invoke the same script from the Menu it is not working fine. Only the last layer is created.
    Script 1: LayerPopupMenuAction
    #target indesign
    #targetengine createLayerset
    var layerTemplateScript = File(File(getActiveScriptPath()).parent.fsName+"/IntializeTemplate.jsx");
    var initTemplateHandler = {
        'beforeDisplay' : function(ev)
                ev.target.enabled = (app.documents.length>0);
        'onInvoke' : function()
                app.doScript(layerTemplateScript, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "Initialize Script");
    var layerMenuAction = app.scriptMenuActions.add("&Create Layer Set");
    for(var init_ev in initTemplateHandler) {
        layerMenuAction.eventListeners.add(init_ev, initTemplateHandler[init_ev]);
    var refMenuItem = app.menus.item("$ID/LayerPanelPopup");
    refMenuItem.menuItems.add(layerMenuAction, LocationOptions.AFTER, refMenuItem.menuItems.item(2));
    function getActiveScriptPath() {
        // This function returns the path to the active script, even when running from ESTK
        try {
            return app.activeScript;
        } catch(e) {
            return e.fileName;
    Script 2: IntializeTemplate
    #target indesign
    if (app.documents.length == 0){
        alert("Please open a document and try again", "Document Error", true);
        exit();
    var templateDoc = app.activeDocument;
    var layerNameArray = ["Fixed_Static_Assets", "Absolute_User_Assets", "Relative_User_Assets"];
    CreateLayers(layerNameArray);
    alert("Initialization Successful");
    //--------------------------------FUNCTIONS ARE DEFINED HERE--------------------------------
    function CreateLayers(LayerNameList){
        var layerListLength = LayerNameList.length;
        var layerObject;
        for (var ln=0; ln<layerListLength; ln++){
            layerObject = templateDoc.layers.itemByName(LayerNameList[ln]);
            if (layerObject.isValid==false){
                layerObject = templateDoc.layers.add({name:LayerNameList[ln]});
                //$.writeln('Layer Creation: ' + layerObject.isValid + ' for '+layerObject.name);
        //Merger Default Layer with the bottom layer:
        var defaultLayer = templateDoc.layers.itemByName("Layer 1");
        if(defaultLayer.isValid==true){
            //$.writeln('Default is Valid and will be merged with top most layer');
            layerObject.merge([defaultLayer]);
    Any help / guidance on this regard will be much helpful.
    @Marijan Tompa [tomaxxi]: I googled for the solution and noticed that you have already worked on similar type of script. Please help me if you can.
    Thanks
    Green4ever

    Hi Green4ever,
    At a very first sight I'd suspect UndoModes.FAST_ENTIRE_SCRIPT which, as you may know, can deeply scramble script steps, especially when a try...catch is in use.
    Try to replace FAST_ENTIRE_SCRIPT by ENTIRE_SCRIPT and tell us.
    @+
    Marc

  • Report window does not close properly when using openDocument

    XI R2 InfoView
    Windows 2003 server
    IIS
    IE7
    We have been experimenting with the use of openDocument and have managed to achieve what we wanted but have one small problem.  When the document is retrieved it is opened in a new browser window.  When Close is selected from the drop-down Document menu the document is closed but the window shrinks to approx 8.5cm x 6 cm and remains open.
    A similar thing happens when we use the Preview button to view a document in the CMC, except in that case the document does not close and closing the browser window leaves a button on the Windows taskbar.  There doesn't appear to be a related window as it cannot be restored but you have to right click and select Close to get rid of it.
    Any ideas what is causing these problems and how we can get round them?

    Anne,
    There are some parameters in opendocument (for ex. sWindow) that can help control certain things, have you tried employing anything like that?  What I find frustrating is the behavior of opendocument based on whether you're running Infoview or WebI -- each product, using the same exact opendocument syntax yields different results.  Based on the sample code below, what I'm seeing with Infoview is the same browser instance is used for calling the child report, however, in WebI, a new browser instance is started and the child report is rendered in Infoview.  In my case, when running within WebI and getting a new browser instance in Infoview, and then using the "Document", "close" workflow, the second instance is exiting and I'm back to the previous browser.  Staying within Infoview entirely through the process, when closing the child report I get brought back to the folder list page.  Who's to know?
    ="<a href=https://<server>/businessobjects/enterprise115/InfoView/scripts/opendocument.aspx?
    idocid=100798&lsSInput_Pos_Nbr="+[Position Number Tracking]+">"+[Position Number Tracking]
    +"</a>"
    (double spaced on purpose)
    Thanks,
    John

  • Landscape in RTF template does not work

    Hi,
    I try to generate an XLS (Excel) document from a RTF template built with Word and the BIP Desktop tool.
    Before saving the RTF template, I go in page setup and set the layout to "landscape".
    When I generate the final document, and open it in Excel, if I go to preview the document is in portrait mode, not landscape.
    How can I do to have the landscape mode ?
    thanks.

    Development has previously confirmed that Page Orientation is not supported for Excel output (ref. bug 8435974). There's an open ER / bug 9818198 which you may want to track via My Oracle Support.

  • Insert SQL does not work properly when called using CALL

    I have a stored procedure (TEST_SP) which is used to insert a record in this perticular case. The SQL statement is 2526 characters long. I'm using
    dim Params : Params=chr(1) & "Insert query" & Chr(1) & "=300"
    runsql=&"{call TEST_SP(?,?)}"&Params 
    dim db : db=dbSelect("",0,"","")
    dbExecSQL db,runsqlto execute the stored procedure. I'm facing an issue when the 2000th character on the insert SQL (pUPDSQL) is a single quote, where the SQL is not getting executed (i.e. record is not getting created).
    The same stored procedure and the same SQL when run as below
    runsql=runsql&"DECLARE "
    runsql=runsql&"PUPDSQL VARCHAR2(4000); "
    runsql=runsql&"PRES VARCHAR2(300); "
    runsql=runsql&"BEGIN "
    runsql=runsql&"PUPDSQL := 'INSERT query..."
    runsql=runsql&"PRES:=300; "
    runsql=runsql&"MRT_LKIDFULUP(PUPDSQL => PUPDSQL,PRES => PRES); "
    runsql=runsql&"END; "
    dim db : db=dbSelect("",0,"","")
    dbExecSQL db,runsqlis working fine. Does anyone know if there is a limitaion in ODBC Call function or any explanation to above behaviour? I'm connecting to a Oracle 11g database using Microsoft ODBC for Oracle driver on Window 7
    The stored procedures:
    create or replace procedure TEST_SP(pUPDSQL IN VARCHAR2,pRES OUT VARCHAR2)
    AS
    BEGIN
    DECLARE
      emsg VARCHAR2(100);
    BEGIN
    if pUPDSQL&lt;&gt;'-1' then
      emsg:='Cant exec UPDATE';
      EXECUTE IMMEDIATE pUPDSQL;
        if SQL%RowCount=0 then
        pRES:='ERR:No row updated';
        return;
      end if;
    end if;
    pRES:='OK:';
    EXCEPTION
      WHEN OTHERS THEN
       pRES:='ERR:' || emsg;
    END;
    END;Edited by: BluShadow on 11-Dec-2012 15:47
    added {noformat}{noformat} tags for readability.  Please read {message:id=9360002} and learn to do this yourself in future.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    ... I'm facing an issue when the 2000th character on the insert SQL (pUPDSQL) is a single quote, ...Perhaps you need two single quotes? like:
    runsql=runsql&"PUPDSQL := 'INSERT query...Values(..,..,,,''This value in two single quotes'',..,...)' "
    ... I'm connecting to a Oracle 11g database using Microsoft ODBC ...Dump windoze ODBC and better use the Oracle client ODBC.
    :p

Maybe you are looking for