RTMT Specific PRI Active Channel Graph

Is there a way in RTMT to see the active MGCP PRI B channels for a specific span? It appears the only real time graph is a total count of all the active B channels registered to the cluster consisting of multiple PRIs, nothing span specific. Any pointers or alternate ways of doing this would be greatly appreciated. I have pulled CDR records and translated into line graph averages, but would like to be able to see a specific PRI line graph in real time instead of doing a constant "sh voice call summary" over and over on the gateway. This is my 1st time to post on the Cisco Support forums, be gentle. :)
Thanks,
Paul

Hi pjsooner7,
welcome to the Community.
Try this:
In RTMT > Performance > StandAlone Cluster > <CUCM's IP Addr> > Cisco MGCP Gateways:
- PRIChannelActive
- PRISpanInService
Hope this helps.

Similar Messages

PRI Activity

Is there any way to watch a live report of my PRI activity?
I've been getting complaints from staff that they are unable to dial out at points, and I want to see how busy our PRI channels are at any given time. We have two PRI's and only 160 people in our office. I highly doubt all 48 channels are being used at one time, so I want to see if all channels on both PRI's are receiving and dialing out calls properly. I've contacted our Telco about this and they say both PRI's are running according to them.
Any ideas, please let me know.
Thanks.
Josh

I've used RTMT before now to monitor SIP trunks. I would guess I can also do PRI!
Have a look here:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/8_5_1/rtmt/RTMT/rtconfcm.html
Hope that helps!
Matty

(Help!) Free subscription magazine app - rejected twice for same bug - Specifically, the activity in

Hi,
Here's the rejection response for the app.
2.2
We found that your app exhibited one or more bugs, when reviewed on iPad running iOS 7.1, on both Wi-Fi and cellular networks, which is not in compliance with the App Store Review Guidelines.
Specifically, the activity indicator spins indefinitely purchasing a subscription. Please see the attached screenshot for details.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.
Screenshot_0.png
I had the same rejection the first time. After looking online at Adobe I thought it was a billing issue, so managed to get that rectifed. I hadnt used a shared secret (as it hadnt shown up because, I thought, the billing wasnt setup correctly). After we corrected the billing, I had access to the shared secret which I have used.
Any ideas what else this could be?
The app is a magazine app which is for free subscription. That's the inapp purchase. No folio in app purchases, because they are free. Sent with the first version on the magazine published, although Apple coulnt have got to it as the subscription time's out.
Help! Because this is the second rejection, it's two weeks on and I am getting close to an event which I must have the app live for.
Thanks for any help,
Matt

Hi Neil,
I used the guide to make the issue — so I think everything is in place.
The first time around our billing wasn't setup so I didn't get to generate a shared secret. The second time I did.
I generated the secret — which I can view under the in app purchase for the (free) subscription in manage in-app purchases. That code I pasted into the admin account iTunes Connect Shared Secret panel for the same customer ID (Account ID). I opened the Folio Producer Organiser afterward — how do you know it registers the code? I didn't see anything to indicate such.
One thing — not sure if it's relevant — whenever the app fails it highlights in yellow the languages in the in-app purchase. I selected more languages this time to cover all the different kinds of English. Again, not sure if that's relevant?
Plus when I click the link to view the app in the app store it says it’s not in the UK store and tries to switch to the US, which if you allow it then says it can’t find. I think this is because it’s not approved and the link will be good when that happens (hence I copied that into the section just below the shared secret on the DPS account admin panel).
Honestly, I am a wee bit stumped now.

My provider is Time Warner , trouble activating channels

My provider is Time Warner cable, iv'e tried to activate some channels like Disney, and when I put in the activation code my provider isn't on the list. What exactly does that mean? Am I out of luck with that channel?

If they aren't on the list then they have chosen not to participate, unfortunately you will be unable to view

Automatically turn on/off channels graph or front panel

Hello,
does anyone know if Labview is capable of selectiing what channels to view?
for instant during ablation testing. i would not like to select the last 3 channels
but during temperature response. i would like to see all channels.
is it possible or i have to manually click it on the front panel?
thank you in advance.

Use a property node to 1) set the "active plot" (the plot you want to mess with in the following properties) and then 2) set plot visibility. As long as you know which plots you want active, it is simple programming from there.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to change z-value in a specific region in intensity graph

Hi all!
I have an intensity graph and I want to mark a specific region which is dark and then change the z-value(autoscale) so I can see what's in this region, of course the rest of the intensity graph will be very bright but it's not a problem. How do I do that?
Thanks in advance
Giang

Easiest method is to change the z scale, unselect autocscale z and rescale the max and min z to the max and minimum region of interest. This can be easily automated, by using the roi as a subset of the input array and then get max min of the subset and feed it to the z-scale property max min.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

How to change z-value in specific region in intensity graph

Hi!
I have an intensity graph and I want to mark a specific region which is dark and then change the z-value(autoscale) so I can see what in this region, of course the rest of the intensity graph will be very bright but it's not a problem. How do I do that?
Thanks in advance
Giang

Assuming you are using LabVIEW, you would be much better off posting to the LabVIEW board since your question has nothing to do with counter/timers.

Interpreting Activity Monitor graphs

I have installed an Activity Monitor icon in my dock in the hope that it will enable me to reduce or prevent the reoccurrences of "rolling beach balls" (Spinning Wait Cursors) on my screen. I have also installed a "Floating CPU Monitor" on my desktop to make it even easier. The problem is that I'm not getting as much as I could out of the graphs, because I don't completely understand them. Is there a place where I can get information that will enable me to get the most benefit from them? If not, I'd at least appreciate explanations for the following:
(1) Floating CPU Monitor: There are two vertical side-by-side columns on my desktop.They operate independently. What activity does each of the two sides reflect?
(2) CPU History: There are two stacked rows of moving bar graphs. The bars move from right to left. There are green bars and there are red bars. What does the top row show? What does the bottom row show? What do the red bars and the green bars show?

WZZZ wrote:
Have a look at these Apple articles.
http://support.apple.com/kb/PH5148
http://support.apple.com/kb/HT4180
http://support.apple.com/kb/HT1342
Thanks, but I went to Google for an answer and found what I needed there. In case you're interested, I have two columns on my Floating CPU Monitor because I have two Intel processors. Thanks for your contribution.

Does Intel support Euro-specific WLan drivers - channels 1-13

Greetings All,
I have spend the last few hours tweaking software/hardware settings in an effort to troubleshoot a Wi-Fi connectivity issue. I finally came to the conclusion that my woes where being caused by interference from a neighbouring access point and thus began the process of channel hoping.
This led me to lock myself out of my Wi-Fi router. How do I hear you ask? Well it's simple, I had the audacity to set my Wi-Fi router to broadcast over channel 13.
Hence my question; does Intel produce and support euro-specific drivers for any of its wireless adapters? For those of you who don't know what I'm talking about Wi-Fi operates over a band of unassigned (by international convention) public frequencies.
In the USA this amounts to channels 1-11, in the UK and Europe channels 1-13 and in Japan channels 1-14. The Intel drivers made available on the Toshiba updates portal seem to be limited to the US spectrum (Ch.1-11) which explains how my ill fated router settings locked me out.
Having access to those extra channels (Ch.12-13) would be quite a boon considering the number of Wi-Fi (and other wireless devices) operating out of the punlic frequency band (there are 4-7 Wi-Fi access points in range of my laptop alone).
Laters,
Lee.
[email protected]

Hmm, I really would appreciate it if your refrained from such scornful sarcasm when you respond to me darkmattermanfor.
Your suggestion was rather poultry (it was the first thing I tried in fact, long before I posted my query here) and certainly didn't warrant such an arrogant and prideful response. Apologies if I am reading too much into the tone of your response but I'm frankly fed up with back seat trolls!
I've downloaded drivers (pertaining to my wireless chipset) from both the Toshiba UK and Intel websites, neither seem to be European localisations (i.e. neither allow reception on channels 12 & 13). I suspect that this limitation is either routed in the hardware itself or Intel simply hasn't bothered to build localised drivers for their wireless products. Especially given that an extensive search of Intel's EU and UK (and Google of course) sites has failed to reveal the existence of such localisations.
The only option would thus seem to be third party drivers. But since this is something of a trivial matter I doubt said drivers exist (who would go to the extent) plus I'm not sufficiently concerned to continue my search.
Kindest Regards,
Lee.
([email protected])

How to use niDCPower_ConfigureSoftwareEdgeMeasureTrigger in PXIe-4154 (each vi session has two active channels)?

I am trying to use this function in my CVI code to configure a PXIe-4154 to make measurement based on software trigger.
niDCPower_ConfigureSoftwareEdgeMeasureTrigger
I saw this RUN TIME ERROR when I execute the code. Error code -1074118587 ... the requested function is not available when multiple channels ar present in the same session.
But this functions is supported by PXIe-4154.
So how do I go about telling the API that I only need to apply to say channel 0, and get over this problem?

Hello Juswanto,
I see that you are getting help from the AE department directly. We will continue with that method of communication. Thank you for contacting National Instruments.
Regards,
National Instruments
Applications Engineer

Recommended lowest Mac Specifications for 32-Channel Recording.

I've been looking a lot into using Logic for Multi-Track recording our bands in a Live setting.
I mix on a Yamaha M7CL and just purchased two MY16-AT Expansion cards that each give us 16 Channels of Digital Direct Out output, 32 Channels output in total. To go with that, I picked up a Presonus Firestudio Lightpipe 32-Channel Interface. For the time being, I only have Logic Express 8 so I will be using that on my Macbook Pro recording 16 Channels.
My question is, what is recommended for best performance on a desktop machine when recording 32 Channels once I upgrade to Logic Studio? I'm shooting to get a new iMac, but want to be sure that I am getting a machine that wont struggle too much when I'm editing the tracks. For example, the 20" (Current Generation) iMac, 2.66ghz and 4gb ram. I'm curious how that would handle it, especially on a bit of a budget.
Any ideas or suggestions are helpful, thanks.

I've never used my Mac to record live, but I have had more than 66 mono tracks running at once in LE7 on my Macbook from an external drive without a hitch. For 32 tracks the specs you listed should be plenty of machine to handle it, IMO.

PRI B-Channel

Can someone remind me what the command is on a gateway to change the state of individual channels? i.e to busy
Thanks

You can use the "isdn service" command as detailed in the following link.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_command_reference_chapter09186a00800ca4be.html#4897
Hope this helps. If so, please rate the post.
Brandon

Need specific points in xy graph

I have xy graph-similar I drow and I'd like to find points, marked with red, automaic(not by hand with cursor) For he right point y value (x=0) and for he left one x value (y=0) The input are two arrays.
..if anyone can help..
Attachments:
gr.JPG ‏17 KB

Well, I think easiest would be to convert the data to complex, search theta for the desired angles, then find the one with the largest R.
Attached is a quick attempt (LabVIEW 7.0). It seems to work with your data, but please verify the code. There are probably bugs.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
histeresis4.vi ‏212 KB

Average Active Sessions graph not updated after restart

Hi,
I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
I also tried to clearstate and restart the agent but no change..
Any idea?
Thanks

This is a bug and can be solved by applying
Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
Eric

DHCP scope to a specific group active directory

Hello,
I need your help.
I need to know if there is a way to
associate a specific DHCP scope to a specific
User Group ActiveDirectory.
Example. Scope1: 192.168.1.0/24
for Group-Police, Scope2:
192.168.2.0/24 for Group Financial etc etc
any way?

Thank you for your reply.
I'm sorry I have not said that I need
for a VPN infrastructure.
When clients connect to vpn
must receive an address associated a scope
according to the type of work they.
The infrastructure is behind
a DMZ and the DHCP
scope and will be provided via
DHCP RELAY but, how do I
say to a particular group of users which
addresses DHCP scope should
receive?

RTMT Specific PRI Active Channel Graph

Similar Messages

Maybe you are looking for